Determination of apparent porosity level of refractory concrete using ultrasonic pulse velocity technique and image analysis
Апстракт
Aim of this paper is to establish the correlation between sintering process, porosity and important thermo-mechanical property of refractory concrete, i.e. creep. Creep deformation was investigated according to standard laboratory procedure applied at three temperatures: 1200, 1300 and 1400 degrees C. Corundum and bauxite based refractory concretes were investigated. The concretes are varying in chemical and mineralogical composition. Both loss of strength and degradation of material occur when refractory concrete is subjected to increased temperature and compressive static load. Measuring of thermo-mechanical properties can indicate and monitor the changes within microstructure. Variation of refractory concrete microstructure, as a consequence of sintering process, during exposure to constant compressive load and constant elevated temperature during certain time-intervals was investigated using scanning electron microscope and Image Pro Plus program for image analysis. Obtained result...s of the investigation proved that creep can be useful method when type of refractory concrete is to be chosen for an application.
Извор:
Mechanical Properties and Performance of Engineering Ceramics and Composites Vi, 2011, 32, 2, 151-161Издавач:
- American Ceramic Society
Финансирање / пројекти:
- Развој нове генерације конструционих материјала за високотемпературну примену (RS-19012)
- Истраживање савремених бетонских композита на бази домаћих сировина, са посебним освртом на могућности примене бетона са рециклираним агрегатом у бетонским конструкцијама (RS-16004)
Институција/група
Institut za ispitivanje materijalaTY - CONF AU - Terzić, Anja AU - Pavlović, Ljubica AU - Mitić, Vojislav PY - 2011 UR - http://rims.institutims.rs/handle/123456789/148 AB - Aim of this paper is to establish the correlation between sintering process, porosity and important thermo-mechanical property of refractory concrete, i.e. creep. Creep deformation was investigated according to standard laboratory procedure applied at three temperatures: 1200, 1300 and 1400 degrees C. Corundum and bauxite based refractory concretes were investigated. The concretes are varying in chemical and mineralogical composition. Both loss of strength and degradation of material occur when refractory concrete is subjected to increased temperature and compressive static load. Measuring of thermo-mechanical properties can indicate and monitor the changes within microstructure. Variation of refractory concrete microstructure, as a consequence of sintering process, during exposure to constant compressive load and constant elevated temperature during certain time-intervals was investigated using scanning electron microscope and Image Pro Plus program for image analysis. Obtained results of the investigation proved that creep can be useful method when type of refractory concrete is to be chosen for an application. PB - American Ceramic Society C3 - Mechanical Properties and Performance of Engineering Ceramics and Composites Vi T1 - Determination of apparent porosity level of refractory concrete using ultrasonic pulse velocity technique and image analysis EP - 161 IS - 2 SP - 151 VL - 32 UR - https://hdl.handle.net/21.15107/rcub_rims_148 ER -
@conference{ author = "Terzić, Anja and Pavlović, Ljubica and Mitić, Vojislav", year = "2011", abstract = "Aim of this paper is to establish the correlation between sintering process, porosity and important thermo-mechanical property of refractory concrete, i.e. creep. Creep deformation was investigated according to standard laboratory procedure applied at three temperatures: 1200, 1300 and 1400 degrees C. Corundum and bauxite based refractory concretes were investigated. The concretes are varying in chemical and mineralogical composition. Both loss of strength and degradation of material occur when refractory concrete is subjected to increased temperature and compressive static load. Measuring of thermo-mechanical properties can indicate and monitor the changes within microstructure. Variation of refractory concrete microstructure, as a consequence of sintering process, during exposure to constant compressive load and constant elevated temperature during certain time-intervals was investigated using scanning electron microscope and Image Pro Plus program for image analysis. Obtained results of the investigation proved that creep can be useful method when type of refractory concrete is to be chosen for an application.", publisher = "American Ceramic Society", journal = "Mechanical Properties and Performance of Engineering Ceramics and Composites Vi", title = "Determination of apparent porosity level of refractory concrete using ultrasonic pulse velocity technique and image analysis", pages = "161-151", number = "2", volume = "32", url = "https://hdl.handle.net/21.15107/rcub_rims_148" }
Terzić, A., Pavlović, L.,& Mitić, V.. (2011). Determination of apparent porosity level of refractory concrete using ultrasonic pulse velocity technique and image analysis. in Mechanical Properties and Performance of Engineering Ceramics and Composites Vi American Ceramic Society., 32(2), 151-161. https://hdl.handle.net/21.15107/rcub_rims_148
Terzić A, Pavlović L, Mitić V. Determination of apparent porosity level of refractory concrete using ultrasonic pulse velocity technique and image analysis. in Mechanical Properties and Performance of Engineering Ceramics and Composites Vi. 2011;32(2):151-161. https://hdl.handle.net/21.15107/rcub_rims_148 .
Terzić, Anja, Pavlović, Ljubica, Mitić, Vojislav, "Determination of apparent porosity level of refractory concrete using ultrasonic pulse velocity technique and image analysis" in Mechanical Properties and Performance of Engineering Ceramics and Composites Vi, 32, no. 2 (2011):151-161, https://hdl.handle.net/21.15107/rcub_rims_148 .