Procedure for assessment of the clays suitability towards fast drying
2023
Преузимање 🢃
Конференцијски прилог (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
During the last 10 years it was shown that Deff – MR curve pattern is unique and very useful. This ability was firstly embedded in the procedure for setting up the fast drying regimes several years ago. This incredible pattern was used again in this invited paper. Actually, if the test samples formed from the same clay do not crack during drying in at least two isothermal experiments in which drying air temperature was different, while drying air humidity and velocity were constant, the unique line can be constructed. This line is linking corresponding Deff – MR curves through the same characteristic point. For simplicity reasons it was chosen to construct and use only the unique line pulled through characteristic E points. Its slope was proposed as the objective criteria for evaluation of the clays suitability for the rapid drying application. It was found that clays, for which the unique line slope is larger, had better dimensional and mechanical properties and were more suitable for... the construction of the fast drying regimes.
Кључне речи:
fast drying / clay / effective moisture diffusivity / drying sensitivity / industrial monitoringИзвор:
International Journal of Modern Manufacturing Technologies, 2023, 15, 3, 192-197Финансирање / пројекти:
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200012 (Институт за испитивање материјала Србије - ИМС, Београд) (RS-MESTD-inst-2020-200012)
Институција/група
Institut za ispitivanje materijalaTY - CONF AU - Vasić, Miloš PY - 2023 UR - http://rims.institutims.rs/handle/123456789/804 AB - During the last 10 years it was shown that Deff – MR curve pattern is unique and very useful. This ability was firstly embedded in the procedure for setting up the fast drying regimes several years ago. This incredible pattern was used again in this invited paper. Actually, if the test samples formed from the same clay do not crack during drying in at least two isothermal experiments in which drying air temperature was different, while drying air humidity and velocity were constant, the unique line can be constructed. This line is linking corresponding Deff – MR curves through the same characteristic point. For simplicity reasons it was chosen to construct and use only the unique line pulled through characteristic E points. Its slope was proposed as the objective criteria for evaluation of the clays suitability for the rapid drying application. It was found that clays, for which the unique line slope is larger, had better dimensional and mechanical properties and were more suitable for the construction of the fast drying regimes. C3 - International Journal of Modern Manufacturing Technologies T1 - Procedure for assessment of the clays suitability towards fast drying EP - 197 IS - 3 SP - 192 VL - 15 UR - https://hdl.handle.net/21.15107/rcub_rims_804 ER -
@conference{ author = "Vasić, Miloš", year = "2023", abstract = "During the last 10 years it was shown that Deff – MR curve pattern is unique and very useful. This ability was firstly embedded in the procedure for setting up the fast drying regimes several years ago. This incredible pattern was used again in this invited paper. Actually, if the test samples formed from the same clay do not crack during drying in at least two isothermal experiments in which drying air temperature was different, while drying air humidity and velocity were constant, the unique line can be constructed. This line is linking corresponding Deff – MR curves through the same characteristic point. For simplicity reasons it was chosen to construct and use only the unique line pulled through characteristic E points. Its slope was proposed as the objective criteria for evaluation of the clays suitability for the rapid drying application. It was found that clays, for which the unique line slope is larger, had better dimensional and mechanical properties and were more suitable for the construction of the fast drying regimes.", journal = "International Journal of Modern Manufacturing Technologies", title = "Procedure for assessment of the clays suitability towards fast drying", pages = "197-192", number = "3", volume = "15", url = "https://hdl.handle.net/21.15107/rcub_rims_804" }
Vasić, M.. (2023). Procedure for assessment of the clays suitability towards fast drying. in International Journal of Modern Manufacturing Technologies, 15(3), 192-197. https://hdl.handle.net/21.15107/rcub_rims_804
Vasić M. Procedure for assessment of the clays suitability towards fast drying. in International Journal of Modern Manufacturing Technologies. 2023;15(3):192-197. https://hdl.handle.net/21.15107/rcub_rims_804 .
Vasić, Miloš, "Procedure for assessment of the clays suitability towards fast drying" in International Journal of Modern Manufacturing Technologies, 15, no. 3 (2023):192-197, https://hdl.handle.net/21.15107/rcub_rims_804 .