Search
Now showing items 11-20 of 43
Određivanje efektivnog koeficijenta difuzije prilikom sušenja uzoraka od gline / Calculation of the effective diffusion coefficient during the drying of clay samples
(Srpsko hemijsko društvo, Beograd, 2012)
Cilj ovog rada je da se na primeru dve opekarske gline sa različitih lokaliteta odredi efektivni koeficijenat difuzije na osnovu eksperimentalno snimljenih krivih sušenja. Razvijen je metod i napravljena su dva kompjuterska ...
The influence of tailings and cement type on durability properties of self-compacting concrete
(Univ Osijek, Tech Fac, Slavonski Brod, 2017)
In order to examine the differences in chemical composition and the possibility of using mine tailings in mortar and concrete production, samples were taken from the landfill and directly from the production. Tailings test ...
Physical-Mechanical Properties of Cement Stabilized RAP/Crushed Stone Aggregate Mixtures
(Univ Osijek, Tech Fac, Slavonski Brod, 2019)
The paper presents and analyzes the results of testing the properties of cement stabilized mixtures of reclaimed asphalt pavement (RAP) and crushed stone aggregate (CSA). Tests were carried out on reclaimed asphalt pavement ...
Concrete mix design for reconstruction of northwest breakwater in the Tripoli harbour - Libya
(Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek, 2011)
Reconstruction of Northwest breakwater in the Tripoli Harbour - Libya (about 4500 m long) required manufacture of various concrete elements (cubes and accropodes) in total amount of 550 000 m(3). Volumes of cubes were 6,3 ...
Determination of the apparent porosity level of refractory concrete during a sintering process using an ultrasonic pulse velocity technique and image analysis
(Savez hemijskih inženjera, Beograd, 2010)
Concrete which undergoes a thermal treatment before (pre-casted concrete blocks) and during (concrete embedded in-situ) its life-service can be applied in plants operating at high temperature and as thermal insulation. ...
Influence of the phase composition of refractory materials on creep
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2006)
In this paper, the relationship between the creeping effect and mineralogical characteristics of the applied binding phase for various refractory materials (high-alumina materials, with high or low impurity content, tar ...
Synthesizing a new type of mullite lining
(Inst Za Kovinske Materiale I In Tehnologie, Ljubjana, 2013)
Various possibilities for developing new mullite-based refractory linings that can be applied in a casting process were investigated and are presented in this paper. An optimization of the refractory-lining composition ...
Buckling resistance of stainless steel angle column
(Union of Croatian Civil Engineers and Technicians, 2019)
A numerical study of compressive capacities of stainless steel angle columns is presented in the paper in order to assess the design procedures presented in Eurocode 3. The study focuses on pin-ended hot-rolled equal angle ...
The Chemometric Study of Limestone Physico-chemical Properties and Thermal Behavior for Application in Construction Composites
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2017)
The limestone, as an economically sustainable and easily available basic raw material, is frequently utilized in the building industry for resolving of the environmental protection issues. The limestone is incorporated in ...
Sintering of Fly Ash Based Composites with Zeolite and Bentonite Addition for Application in Construction Materials
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2017)
Due to pozzolanic characteristics, fly ash is commonly used as a cement replacement in construction composites. Addition of natural clays with sorption ability (i.e. zeolite and bentonite) in to the fly ash based construction ...