Претраживање
Приказ резултата 51-60 од 71
Gamma Radiation Absorption Characteristics of Concrete with Components of Different Type Materials
(Polish Acad Sciences Inst Physics, Warsaw, 2010)
Nuclear facilities as nuclear power stations, nuclear research reactors, particle accelerators and linear accelerator in medical institution using concrete in building construction. The different type materials of the ...
Synthesizing a new type of mullite lining
(Inst Za Kovinske Materiale I In Tehnologie, Ljubjana, 2013)
Various possibilities for developing new mullite-based refractory linings that can be applied in a casting process were investigated and are presented in this paper. An optimization of the refractory-lining composition ...
Influence of increased temperature on clay fast drying process
(Revista Romana de Materiale/ Romanian Journal of Materials, 2009)
In this paper are presented testing results during process of fast drying at conditions of increased temperature. Three different masonry raw materials were examined using recircular laboratory dryer with air recirculation. ...
The influence of silica fume and curing regime on some properties of concrete
(Revista Romana de Materiale/ Romanian Journal of Materials, 2014)
The investigation of posibilities of concrete structure modification by silica fume to improve concrete properties was presented in this report. Percentage of silica fume in regard to cement varied between 0% and 20%. ...
Life extension of gears flank surfaces regenerated by hard facing
(Editura Stiintifica Fmr, Bucharest, 2013)
This paper contains the results of experimental analysis of fatigue endurance of used steel teeth regenerated by hard facing. The cylindrical spur gears were tested and compared with the newly made ones, oiler being ...
Buckling resistance of stainless steel angle column
(Union of Croatian Civil Engineers and Technicians, 2019)
A numerical study of compressive capacities of stainless steel angle columns is presented in the paper in order to assess the design procedures presented in Eurocode 3. The study focuses on pin-ended hot-rolled equal angle ...
Investigation of high temperature behavior and sintering mechanism of fly ash based concretes
(Procema SA, 2014)
Four types of refractory concretes were studied at various temperatures ranging from ambient to adopted maximal 1400 degrees C. The concretes had same matrix composition: K concretes were based on corundum aggregate; B ...
Concrete mix design for reconstruction of northwest breakwater in the Tripoli harbour - Libya
(Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek, 2011)
Reconstruction of Northwest breakwater in the Tripoli Harbour - Libya (about 4500 m long) required manufacture of various concrete elements (cubes and accropodes) in total amount of 550 000 m(3). Volumes of cubes were 6,3 ...
Mechanical properties of ultra high performance self compacting concrete with different mineral admixtures
(Revista Romana de Materiale/ Romanian Journal of Materials, 2011)
Preparation and microstructure of ultra high performance concrete (UHPC) have been intensively analyzed In the last few years. The mechanical properties (compressive strength and flexural strength) were investigated under ...
Determination of recycled aggregate concrete degradation by resonance frequency analysis
(Revista Romana de Materiale/ Romanian Journal of Materials, 2011)
The evaluation of the dynamic modulus of elasticity of twelve different concrete mix proportions as a function of the density and degradations due to freeze/thaw cycles is presented in this paper. Pore system and saturation ...