Претраживање
Приказ резултата 1-10 од 17
Assessment of intensive grinding effects on alumina as refractory compound: Acceleration of gamma to alpha phase transformation mechanism
(Elsevier Sci Ltd, Oxford, 2014)
In this study, the feasibility of alumina phase transition enhancement by mechanical activation was conducted. It was showed that the milling environment plays an important role on the physical, chemical and thermal behavior ...
Optimization of bentonite clay mechano-chemical activation using artificial neural network modeling
(Elsevier Sci Ltd, Oxford, 2017)
The properties of seven montmorillonite-rich bentonites of different geological origin were investigated prior and subsequent to mechano-chemical processing in an ultra-centrifugal mill. The objective of the experiment was ...
Optimization of drying through analytical modeling: clays as bonding agents in refractory materials
(Elsevier Sci Ltd, Oxford, 2016)
The objective of this study was to investigate the clay drying as a unit operation in the refractory materials processing. Two clays that varied in chemical and mineralogical compositions were experimentally tested in a ...
Effects of mechanical-activation and TiO2 addition on the behavior of two-step sintered steatite ceramics
(Elsevier Sci Ltd, Oxford, 2019)
Steatite, as ceramic with composition predominantly resting on magnesium silicate, was produced from economic resources - talc, aluminosilicate clays, and either BaCO3 or feldspar as flux. Titanium dioxide was a doping ...
Optimization of the production process through response surface method: Bricks made of loess
(Elsevier Sci Ltd, Oxford, 2013)
Loess clays are commonly used to produce bricks. Heavy clays, taken at location near Zrenjanin, Serbia, are used as a representative raw material in this study. The sample, containing about 28% of clay sized particles, is ...
Comprehensive approach to the influence of frequently used secondary raw materials on clay bricks quality using mathematical modeling (a systematic review)
(Elsevier Sci Ltd, Oxford, 2018)
The main idea of this research was to evaluate rice and sunflower hulls, sawdust and their ashes, as additives in clay brick production using mathematical analysis. All available papers, containing the parameters of interest, ...
ANN model of brick properties using LPNORM calculation of minerals content
(Elsevier Sci Ltd, Oxford, 2014)
Mineralogical composition of heavy clays is one of the most important properties when stadying raw materials in brick industry. Within this study, quantitative determination of minerals using LPNORM calculation was performed, ...
Influence of different bonding and fluxing agents on the sintering behavior and dielectric properties of steatite ceramic materials
(Elsevier Sci Ltd, Oxford, 2017)
The focus of the study was on providing insights into interconnections between sintering and development of the crystalline microstructure, and consequently variations in dielectric behavior of four steatites fabricated ...
Mechanically activated coal ash as refractory bauxite shotcrete microfiller: Thermal interactions mechanism investigation
(Elsevier Sci Ltd, Oxford, 2014)
A growing demand for refractory castables with advanced properties has given rise to a continuous technological evolution and highlighted the necessity for secondary raw materials reapplication even in refractory industry. ...
Prediction and fuzzy synthetic optimization of process parameters in heavy clay brick production
(Elsevier Sci Ltd, Oxford, 2013)
Many factors influence final clay brick properties, since the raw materials used are highly heterogeneous. Statistical analysis is rarely used, according to literature, but it would improve understanding of the overall ...