Претраживање
Приказ резултата 11-17 од 17
Analytical modeling of activation procedure applied in alpha-alumina thermo-mechanical synthesis
(Elsevier Sci Ltd, Oxford, 2015)
The impact of the mechanical processing parameters on the alumina grain-size distribution affiliated characteristics and on the gamma to alpha phase transformation rate was investigated. The moderation in the alumina samples ...
Sensitivity analysis of mathematical models for final product properties: Link to DTG curve
(Elsevier Sci Ltd, Oxford, 2013)
Compressive strength and water absorption of fired heavy clay products varies with firing temperatures, but not entirely according to linear function, as it is mostly reported in literature. Also, differential thermo-gravimetric ...
Chemometric analysis of the influence of mechanical activation on the mica quality parameters
(Elsevier Sci Ltd, Oxford, 2015)
The differences in the set of the process parameters measured before and after mica mechanical activation and their influence on the grain size distribution related characteristics have been studied. The modification of ...
Artificial fly ash based aggregates properties influence on lightweight concrete performances
(Elsevier Sci Ltd, Oxford, 2015)
The effect of the application of pelletized fly ash based aggregates obtained through different processing techniques on the behavior of lightweight concretes was analyzed. Experimental program implied production of four ...
What to expect from heavy clay?
(Elsevier Sci Ltd, Oxford, 2013)
The need of testing the quality of brickclay arises in all brick factories, with the opening of new deposits. The analyses are both time and economically consuming, so the aim of this study was to shorten the procedure ...
Mathematical approach to application of industrial wastes in clay brick production - Part I: Testing and analysis
(Elsevier Sci Ltd, Oxford, 2015)
The objective of this study was to investigate utilization potential of organic and inorganic industrial wastes in clay bricks. Mineral composition of starting heavy clay sample is tested using an X-ray diffractometer. ...
Mathematical approach to application of industrial wastes in clay brick production-Part II: Optimization
(Elsevier Sci Ltd, Oxford, 2015)
The effects of organic and inorganic waste sludges, coal dust, fly and landfill ashes, soybean crust, sawdust, sunflower flakes and their ash addition to representative heavy clay were investigated. Changes introduced to ...