Претраживање
Приказ резултата 181-190 од 198
Network-level pavement life-cycle assessment tool
(CRC Press/Balkema, 2015)
In addition to their attempt to keep overall maintenance costs low while keeping their road networks in the appropriate condition, road agencies are facing even more demanding challenges as they incorporate effects on ...
Primena postupaka poroziranja opekarskih proizvoda sekundarnim sirovinama / Improving porosity of heavy clay bricks using secondary raw materials
(Udruženje inženjera građevinarstva, geotehnike, arhitekture i urbanista "Izgradnja", Beograd, 2011)
Uvažavajući zahteve održivog razvoja u ciglarskoj industriji poslednjih godina se sve više istražuje mogućnost upotrebe otpada u kompozitima na bazi gline, u cilju očuvanja prirodnih resursa, sirovina i energije. U ovom ...
The study of thermal behavior of montmorillonite and hydromica brick clays in predicting tunnel kiln firing curve
(Elsevier Sci Ltd, Oxford, 2017)
The aim of this study was to test montmorillonite and hydromica type of brick clays by using simultaneous thermal analysis and dilatometry in an assessment of the suitability of brick clays to produce building elements. ...
The main factors influencing canine demodicosis treatment outcome and determination of optimal therapy
(Springer, New York, 2015)
The main idea of this research was to evaluate the efficacy of canine demodicosis conventional treatments using mathematical analyses. All available papers published between 1980 and 2014 were used in this study. One hundred ...
Effects of mechanical activation on the parameters of talc quality for ceramics production - Chemometric approach
(Elsevier Sci Ltd, Oxford, 2015)
Talc is broadly used in the ceramic materials industry, either as a basic raw material, or as filler, due to its chemical inertia, fragmentation proneness, thermal stability, and refractoriness. The mechanical activation ...
Non-typical defects on surfaces of ceramic and roof tiles: Nature and the causes
(ModTech Publishing House, 2015)
This research was conducted to identify the nature and the cause of non-typical defects which appeared on the visible surfaces of ceramic and roof tiles. Microstructural analysis was conducted via optical microscope and ...
Mathematical approach to application of industrial wastes in clay brick production - Part I: Testing and analysis
(Elsevier Sci Ltd, Oxford, 2015)
The objective of this study was to investigate utilization potential of organic and inorganic industrial wastes in clay bricks. Mineral composition of starting heavy clay sample is tested using an X-ray diffractometer. ...
Mathematical approach to application of industrial wastes in clay brick production-Part II: Optimization
(Elsevier Sci Ltd, Oxford, 2015)
The effects of organic and inorganic waste sludges, coal dust, fly and landfill ashes, soybean crust, sawdust, sunflower flakes and their ash addition to representative heavy clay were investigated. Changes introduced to ...
Analysis of Moisture Transfer During the Drying of Clay Tiles with Particular Reference to an Estimation of the Time-Dependent Effective Diffusivity
(Taylor & Francis Inc, Philadelphia, 2014)
The description of the drying process was reduced to the establishment of a series of theoretical and empirical drying models. The complex processes of simultaneous moisture and heat transfer, which are often nonstationary, ...
The influence of high pressures on structural changes of some minerals
(Elsevier Science Bv, Amsterdam, 1997)
An X-ray analysis of some of the most frequently found minerals in natural silicate soils that have previously been subjected to pressures of up to 19 GPa has been performed. The test results have shown that the increase ...