Synthesis, characterization and application of the filler based on corundum for obtaining the ceramic coats in foundry
Апстракт
In this work, a possibility to develop new ceramic coats based corundum for casting applications has been examined. Optimization of coating composition with controlled rheological properties was attained by applying different coating components, and by alteration of coating production procedure. As filler, corundum powder with particle size of 20x10(-6) m and 40x10(-6) m was used. The corundum sample was tested by the following methods: X-ray diffraction analysis and with polarized microscope. The shape and grain size were analyzed by the program package OZARIA 2.5. It was shown that application of this type of water-alcohol-based coating had a positive influence on surface quality, structural and mechanical properties of the castings of Fe-C and Al alloys obtained by casting into sand molds, according to the method of expandable patterns (EPC process).
Кључне речи:
sand casting / refractory coating / expandable patterns casting process / corundumИзвор:
Metalurgia International, 2012, 17, 3, 83-87Издавач:
- Editura Stiintifica Fmr, Bucharest
Финансирање / пројекти:
- Развој технолошких поступака ливења под утицајем електромагнетног поља и технологија пластичне прераде у топлом стању четворокомпонентних легура Al-Zn за специјалне намене (RS-MESTD-Technological Development (TD or TR)-34002)
- Усмерена синтеза, структура и својства мултифункционалних материјала (RS-MESTD-Basic Research (BR or ON)-172057)
- Развој и примена мултифункционалних материјала на бази домаћих сировина модернизацијом традиционалних технологија (RS-MESTD-Integrated and Interdisciplinary Research (IIR or III)-45008)
Институција/група
Institut za ispitivanje materijalaTY - JOUR AU - Prstić, Aurel AU - Aćimović-Pavlović, Zagorka AU - Durić, Milutin AU - Terzić, Anja AU - Pavlović, Ljubica PY - 2012 UR - http://rims.institutims.rs/handle/123456789/180 AB - In this work, a possibility to develop new ceramic coats based corundum for casting applications has been examined. Optimization of coating composition with controlled rheological properties was attained by applying different coating components, and by alteration of coating production procedure. As filler, corundum powder with particle size of 20x10(-6) m and 40x10(-6) m was used. The corundum sample was tested by the following methods: X-ray diffraction analysis and with polarized microscope. The shape and grain size were analyzed by the program package OZARIA 2.5. It was shown that application of this type of water-alcohol-based coating had a positive influence on surface quality, structural and mechanical properties of the castings of Fe-C and Al alloys obtained by casting into sand molds, according to the method of expandable patterns (EPC process). PB - Editura Stiintifica Fmr, Bucharest T2 - Metalurgia International T1 - Synthesis, characterization and application of the filler based on corundum for obtaining the ceramic coats in foundry EP - 87 IS - 3 SP - 83 VL - 17 UR - https://hdl.handle.net/21.15107/rcub_rims_180 ER -
@article{ author = "Prstić, Aurel and Aćimović-Pavlović, Zagorka and Durić, Milutin and Terzić, Anja and Pavlović, Ljubica", year = "2012", abstract = "In this work, a possibility to develop new ceramic coats based corundum for casting applications has been examined. Optimization of coating composition with controlled rheological properties was attained by applying different coating components, and by alteration of coating production procedure. As filler, corundum powder with particle size of 20x10(-6) m and 40x10(-6) m was used. The corundum sample was tested by the following methods: X-ray diffraction analysis and with polarized microscope. The shape and grain size were analyzed by the program package OZARIA 2.5. It was shown that application of this type of water-alcohol-based coating had a positive influence on surface quality, structural and mechanical properties of the castings of Fe-C and Al alloys obtained by casting into sand molds, according to the method of expandable patterns (EPC process).", publisher = "Editura Stiintifica Fmr, Bucharest", journal = "Metalurgia International", title = "Synthesis, characterization and application of the filler based on corundum for obtaining the ceramic coats in foundry", pages = "87-83", number = "3", volume = "17", url = "https://hdl.handle.net/21.15107/rcub_rims_180" }
Prstić, A., Aćimović-Pavlović, Z., Durić, M., Terzić, A.,& Pavlović, L.. (2012). Synthesis, characterization and application of the filler based on corundum for obtaining the ceramic coats in foundry. in Metalurgia International Editura Stiintifica Fmr, Bucharest., 17(3), 83-87. https://hdl.handle.net/21.15107/rcub_rims_180
Prstić A, Aćimović-Pavlović Z, Durić M, Terzić A, Pavlović L. Synthesis, characterization and application of the filler based on corundum for obtaining the ceramic coats in foundry. in Metalurgia International. 2012;17(3):83-87. https://hdl.handle.net/21.15107/rcub_rims_180 .
Prstić, Aurel, Aćimović-Pavlović, Zagorka, Durić, Milutin, Terzić, Anja, Pavlović, Ljubica, "Synthesis, characterization and application of the filler based on corundum for obtaining the ceramic coats in foundry" in Metalurgia International, 17, no. 3 (2012):83-87, https://hdl.handle.net/21.15107/rcub_rims_180 .