Pretraživanje
Prikaz rezultata 221-230 od 241
Properties of concrete kerbs with recycled aggregate from precast elements
(ZAG, Ljubljana, 2021)
The paper presents the possibility of using recycled aggregate from precast concrete paving elements
and kerbs in the production of concrete kerb units. Experimental work included several types of concrete consistency
class ...
Frost resistance of heavyweight self-compacting concrete
(Department of Civil Engineering and Geodesy, Faculty of Technical Sciences, Novi Sad, 2023)
Self-compacting concrete (SCC), a non-shaped composite building material, has
improved microstructure packing, strength, and durability thanks to the use of fly ash, a
highly effective mineral additive. Performances of ...
Discover Sustainability
(Springer Nature, 2024)
Comparison of distributed plasticity approaches for inelastic analyisis of reinforced concrete frames
(University of Montenegro Faculty of Civil Engineering, 2024)
Following the emergence and establishment of performance-based design as a widely recognized
and applied practice, numerous significant advances in computational techniques have been
made. Arguably, nonlinear methods of ...
Raw clays in the production of ceramic and refractory tiles
(Qualicer 2024, Congress Proceedings, Castellón de la Plana, Spain, 2024)
Raw clay samples from Serbia, mainly of kaolinitic, illitic and mixed nature, were
tested for their possible application in the production of ceramics. Using various triaxial
diagrams, the samples were sorted according ...
Welded Joints Integrity of the Pressure Vessels Pipes Made of Hot Rolled Fine-Grained Steel
(Savez energetičara, 2021)
This paper contains results of tests performed in order
to determine mechanical properties of steel P460NL1, meant for
production of pressure vessels. Arc welding of samples from
which the specimens were taken was carried ...
Effect of temperature and specimen orientation on Charpy impact toughness
(Elsevier, 2022)
Steel grade 14MoV6 3 is used for manufacturing of boilers and steam pipelines designed for steam temperatures up to 560°C. This paper presents the experimental analysis which included impact toughness test. The analysis ...
Lamellar Tearing of Parent Material and Degradation of Welded Joints at Vital Welded Structures
(Savez energetičara, 2021)
Vertical Kaplan turbines, manufactured in Russia, are
installed in 6 hydroelectric generating units at ‘Djerdap 1’, with
nominal power of 176 MW each. Because of the structural
solution and inability of performing ...
Neutron shielding parameters of selected types of concrete
(FACULTY OF CIVIL ENGINEERING SUBOTICA, 2024)
In this scientific research, the definition of appropriate neutron shielding
parameters is presented and the results of calculations or measurements of these
parameters are presented for four selected types of concrete ...
The recycling of demolition roof tile waste as a resource in the manufacturing of fired bricks: A scale-up to the industry
(Elsevier Ltd, 2024)
This study illustrates the utilization of roof tile waste as a resource in the manufacturing of fired bricks. Although commonly referred to as demolition waste, it is technically classifed as construction and demolition ...