Претраживање
Приказ резултата 21-30 од 51
Analysis of current state and integrity evaluation for the supply tank of generation unit 6 of thermal power plant Nikola Tesla ”A”, Obrenovac
(Trans Tech Publications Ltd, 2014)
Stable supply tank, with volume V = 250 m3 and operating pressure p = 1,5 MPa, of generation unit 6 at thermal power plant 'Nikola Tesla A' in Obrenovac, is designed for water-steam working fluid. It was made of steel Č ...
Methodology for reparation of damaged sleeves and welded shield sections of guide vanes at hydropower plant DJERDAP 1
(Trans Tech Publications Ltd, 2014)
Vertical Kaplan turbines, manufactured in Russia and with nominal power of 200 MW, have been installed in 6 hydroelectric generating units at ’Djerdap 1’. During the refurbishment of hydropower plant experimental non-destructive ...
Tertiary plutonic rocks of southern Serbia Vardar Zone as dimension stone
(Univerzitet u Beogradu - Rudarsko-geološki fakultet, Beograd, 2014)
Three granitoid plutons of south-Serbian part of the Vardar Zone, of Tertiary
age were studied in order to establish their potential for utilization as
dimension stone. These rocks vary in composition from ...
Investigation of the mortar and concrete resistance in aggressive solutions
(Univ Osijek, Tech Fac, Slavonski Brod, 2014)
Testing the influence of two aggressive solutions - sulphate and nitrate on mortar and concrete was presented in this paper. Experimental work included testing of mortar prisms with 5 % special admixture. Also, four types ...
Drying kinetic simulation of clay tiles made from the raw material having less clay fraction
(Trans Tech Publications Ltd, 2014)
In order to describe the internal moisture rate and to take all different mechanisms of moisture movement into account, it is suitable to use effective diffusivity as a measure of moisture rate, irrespectively of the ...
Prediction and Optimization of Heavy Clay Products Quality
(Wiley Blackwell, 2014)
The effects of chemical composition, firing temperature (800-1100 °C), and several shape formats of laboratory brick samples on the final product quality were investigated. Prediction of the final laboratory products ...
Developing Cost Estimation Models for Road Rehabilitation and Reconstruction: Case Study of Projects in Europe and Central Asia
(ASCE - American Society of Civil Engineers, 2014)
This paper presents the development of prediction models for the unit costs of road works that could be applied to strategic planning of road works at the network level. A specialized data set was used, which was generated ...
Drying simulation of shrinkable clay tiles using variable diffusivity model
(Trans Tech Publications Ltd, Stafa-Zurich, 2014)
This paper represents the upgrade of our previous study in which we have presented a model for simulation of the drying kinetic and estimation of the effective moisture diffusivity of clay tiles using a constant diffusivity ...
Thermal and mineralogical characterization of loess heavy clays for potential use in brick industry
(Elsevier, Amsterdam, 2014)
This paper describes a study of 11 selected samples of loess soil from Serbia, by using differential scanning calorimetry, simultaneously with thermogravimetry and its differential calculation, known as simultaneous thermal ...
Analysis of trace elements in surface sediments, mussels, seagrass and seawater along the southeastern Adriatic coast - a chemometric approach
(Walter De Gruyter Gmbh, Berlin, 2014)
Surface sediments, mussels, seagrass, surface and bottom seawater samples were collected from the costal area of the southeastern Adriatic Sea and analyzed in order to determine the concentration and origin of the following ...