Pretraživanje
Prikaz rezultata 11-20 od 198
Optimization of adobe clay bricks based on the raw material properties (mathematical analysis)
(Elsevier Sci Ltd, Oxford, 2020)
This research studies the effects of composition and granulometry analysis of 139 heavy clays on the important characteristics of wet and adobe clay bricks. ANN models were obtained with high prediction accuracy in training ...
Determination of LCF Plastic and Elastic Strain Components of Steel
(Springer Science and Business Media B.V., 2022)
The behavior of steel in low-cycle fatigue (LCF) is tested experimentally, in accordance with ISO 12106:2017 (E) and/or ASTM E 606-04. For this purpose, smooth specimens which are exposed to low-cycle fatigue at several ...
High-temperature concrete binders based on fly ash
(Revista Romana de Materiale/ Romanian Journal of Materials, 2013)
High-temperature concrete binders in which fly ash, as environmentally harmful secondary raw material, is combined with masonry and refractory cement is a new option for reapplication of this coal combustion by-product. ...
Geopolimeri na bazi alkalno aktiviranog elektrofilterskog pepela kao novo vezivo u betonu / Alkali activated fly ash geopolymers as a new binder in concrete
(Udruženje inženjera građevinarstva, geotehnike, arhitekture i urbanista "Izgradnja", Beograd, 2013)
U skladu sa rastućom brigom za zaštitu životne sredine i potrebom razvoja održivog građevinarstva, javlja se i veće interesovanje za istraživanja u oblasti novih materijala, koji će koristiti otpadne sirovine i imati manji ...
Process parameters influence on microstructural properties of hypereutectic al-18wt% Si alloys obtained by rheocasting process
(Editura Stiintifica Fmr, Bucharest, 2012)
Hypereutectic Al-18wt%Si alloy was obtained by conventional and rheocasting procedure at cooling rate 0.16 +/- 0.05 degrees Cs-1. Samples of rheocasted alloy were obtained at two stirring speeds 1000 and 1500 rpm. Tests ...
Evaluation of Lignite Fly Ash for Utilization as Component in Construction Materials
(Taylor & Francis Inc, Philadelphia, 2013)
Utilization potential of fly ash, as the main residue in the lignite coal combustion in Serbian power plants, was investigated in present study. High production of fly ash represents extreme hazard for environment. Question ...
Prediction and fuzzy synthetic optimization of process parameters in heavy clay brick production
(Elsevier Sci Ltd, Oxford, 2013)
Many factors influence final clay brick properties, since the raw materials used are highly heterogeneous. Statistical analysis is rarely used, according to literature, but it would improve understanding of the overall ...
Model of Probabilistic Analysis of Pile Capacity Based on the Extrapolation of Load-Settlement Curves
(Springer, New York, 2020)
This paper formulates a mathematical model using the extrapolation of load-settlement curves with a rational function for analyzing the capacity of piles obtained from the static load test (SLT). In preliminary analyses, ...
Concrete paving blocks and flags made with crushed brick as aggregate
(Construction and Building Materials, 2012)
Demolition of old buildings in urban cores has produced a large amount of waste material. Since they are mostly masonry structures the largest part of the waste material is ceramic waste. Besides that, ceramic waste is ...
Mix design and engineering properties of ultra high performance self compacting concrete
(Czech Concrete Soc-Ceska Betonarska Spolecnost Cssi, Prague 1, 2011)
The mechanical properties (compressive strength and flexural strength) were investigated under different curing conditions (standard and steam curing). Silica fumes have characteristics that make them necessary in cement ...