Претраживање
Приказ резултата 821-830 од 873
Effect of temperature and specimen orientation on Charpy impact toughness
(Elsevier, 2022)
Steel grade 14MoV6 3 is used for manufacturing of boilers and steam pipelines designed for steam temperatures up to 560°C. This paper presents the experimental analysis which included impact toughness test. The analysis ...
Lamellar Tearing of Parent Material and Degradation of Welded Joints at Vital Welded Structures
(Savez energetičara, 2021)
Vertical Kaplan turbines, manufactured in Russia, are
installed in 6 hydroelectric generating units at ‘Djerdap 1’, with
nominal power of 176 MW each. Because of the structural
solution and inability of performing ...
Neutron shielding parameters of selected types of concrete
(FACULTY OF CIVIL ENGINEERING SUBOTICA, 2024)
In this scientific research, the definition of appropriate neutron shielding
parameters is presented and the results of calculations or measurements of these
parameters are presented for four selected types of concrete ...
The Development of Controlled Damage Mechanisms-Based Design Method for Nonlinear Static Pushover Analysis
(Facta Universitatis, Series: Architecture and Civil Engineering, 2014)
This paper presents the original method of controlled building damage mechanisms based on Nonlinear Static Pushover Analysis (NSPA-DMBD). The optimal building damage mechanism is determined based on the solution of the ...
Vulnerability of Damaged Structures: The Concept of the Scenario of Related Non-Linear Analyses
(Varna Free University “Chernorizets Hrabar”, Varna, Bulgaria, 2014)
The research presented in the paper employed the general approach in the analysis of robustness of reinforced concrete skeletal (frame) structures in the events of severe damage caused by strong earthquakes. Such damage ...
Parameter programs for 3D modeling in the function of nondestructive testing and determination of the lifetime of pressure vessels
(UNIVERSITY OF EAST SARAJEVO FACULTY OF TECHNOLOGY, 2023)
Preparation for non-destructive testing (NDT), preparation of test reports, as well as control
calculation of a pressure vessel (PV) using the finite element method (FEM), with or without
identified irregularities, ...
Modeling of Damping Effects in Soil – Structure Interaction in the Pushover Analysis
(1st Croatian Conference on Earthquake Engineering, Zagreb, Croatia, 2021)
The paper shows aspects of damping modelling in nonlinear static pushover analysis (NSPA) of structures through systematization of damping types and formed flow diagram, depending on the type of applied target displacement ...
Some Aspects of Pile Testing Using Static Load Test (SLT)
(Savez građevinskih inženjera Srbije SGIS, 2021)
The paper presents typical examples of pile load tests with a specific analysis of results, whereby the test methodology relies on existing ASTM standards, own knowledge and experience. The pile tests were conducted using ...
Analysis of the steam line damages
(Mašinski Fakultet Banja Luka, Republika Srpska, 2015)
The methodological approach to the analysis of damage to determine the
cause of failure and to repair the damage has been shown using the example of leakage
and damage of a steam line for live-steam in thermal power ...