Non-destructive metallography & replica method for inspection connecting rod material and cracks detection
Апстракт
Testing of materials properties is usually a discipline for the quality assurance during manufacturing processes. In condition monitoring, certification or upgrading of existing plants and in failure analysis similar benefits from nondestructive testing of materials properties can be achieved. Another benefit from the Non-Destructive Metallography (NDM) is that the test can be made on-site. NDM is a well established and proven tool to help determine the integrity of generator and hydro turbine components during their life-cycle in power plant environments. On-site metallography of components makes it possible to evaluate the microstructure of materials. It allows microstructural analysis of large components that are difficult to move or not permitted to be destructively tested, enabling rapid evaluation of the material. Here are monitored the microstructural changes and crack detection in St 35 connecting rod steel after approximately 15 years in service. The paper includes a short des...cription of the replica method as a technique for microstructural examination of components by using non-destructive testing method.
Извор:
DOAJ, 2013, 1/1, 22-24URI
https://doaj.org/article/b1901f45fd5146a992a526f6b1a24fe6http://rims.institutims.rs/handle/123456789/663
Институција/група
Institut za ispitivanje materijalaTY - JOUR AU - Kovačević, Zorica AU - Karastojković, Zoran AU - Aleksić, Vujadin PY - 2013 UR - https://doaj.org/article/b1901f45fd5146a992a526f6b1a24fe6 UR - http://rims.institutims.rs/handle/123456789/663 AB - Testing of materials properties is usually a discipline for the quality assurance during manufacturing processes. In condition monitoring, certification or upgrading of existing plants and in failure analysis similar benefits from nondestructive testing of materials properties can be achieved. Another benefit from the Non-Destructive Metallography (NDM) is that the test can be made on-site. NDM is a well established and proven tool to help determine the integrity of generator and hydro turbine components during their life-cycle in power plant environments. On-site metallography of components makes it possible to evaluate the microstructure of materials. It allows microstructural analysis of large components that are difficult to move or not permitted to be destructively tested, enabling rapid evaluation of the material. Here are monitored the microstructural changes and crack detection in St 35 connecting rod steel after approximately 15 years in service. The paper includes a short description of the replica method as a technique for microstructural examination of components by using non-destructive testing method. T2 - DOAJ T1 - Non-destructive metallography & replica method for inspection connecting rod material and cracks detection EP - 24 SP - 22 VL - 1/1 UR - https://hdl.handle.net/21.15107/rcub_rims_663 ER -
@article{ author = "Kovačević, Zorica and Karastojković, Zoran and Aleksić, Vujadin", year = "2013", abstract = "Testing of materials properties is usually a discipline for the quality assurance during manufacturing processes. In condition monitoring, certification or upgrading of existing plants and in failure analysis similar benefits from nondestructive testing of materials properties can be achieved. Another benefit from the Non-Destructive Metallography (NDM) is that the test can be made on-site. NDM is a well established and proven tool to help determine the integrity of generator and hydro turbine components during their life-cycle in power plant environments. On-site metallography of components makes it possible to evaluate the microstructure of materials. It allows microstructural analysis of large components that are difficult to move or not permitted to be destructively tested, enabling rapid evaluation of the material. Here are monitored the microstructural changes and crack detection in St 35 connecting rod steel after approximately 15 years in service. The paper includes a short description of the replica method as a technique for microstructural examination of components by using non-destructive testing method.", journal = "DOAJ", title = "Non-destructive metallography & replica method for inspection connecting rod material and cracks detection", pages = "24-22", volume = "1/1", url = "https://hdl.handle.net/21.15107/rcub_rims_663" }
Kovačević, Z., Karastojković, Z.,& Aleksić, V.. (2013). Non-destructive metallography & replica method for inspection connecting rod material and cracks detection. in DOAJ, 1/1, 22-24. https://hdl.handle.net/21.15107/rcub_rims_663
Kovačević Z, Karastojković Z, Aleksić V. Non-destructive metallography & replica method for inspection connecting rod material and cracks detection. in DOAJ. 2013;1/1:22-24. https://hdl.handle.net/21.15107/rcub_rims_663 .
Kovačević, Zorica, Karastojković, Zoran, Aleksić, Vujadin, "Non-destructive metallography & replica method for inspection connecting rod material and cracks detection" in DOAJ, 1/1 (2013):22-24, https://hdl.handle.net/21.15107/rcub_rims_663 .