TY  - CONF
AU  - Janković, Ksenija
AU  - Stojanović, Marko
AU  - Bojović, Dragan
AU  - Terzić, Anja
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/651
AB  - This study compared the performance of self-compacting concrete (SCC) based on fly ash addition and limestone filler. A SCC prepared with Portland cement, river sand, and limestone filler was used as a reference sample. Additional experimental self-compacting concretes with different types of fine aggregates, fillers, and special additives for increasing freeze-thaw resistance were prepared and optimized. The correlation between mix design, i.e., percentage of barite sand and additives, and properties of fresh SCC (slump-flow test, V-funnel test, and L-box test), as well as properties of hardened SCC (compressive strengths), were investigated and discussed.
C3  - International RILEM Conference on Synergising Expertise towards Sustainability and Robustness of Cement-based Materials and Concrete Structures
T1  - Influence of Aggregate Type on the Properties on SCC with Fly Ash
DO  - 10.1007/978-3-031-33187-9_5
ER  - 

@conference{
author = "Janković, Ksenija and Stojanović, Marko and Bojović, Dragan and Terzić, Anja",
year = "2023",
abstract = "This study compared the performance of self-compacting concrete (SCC) based on fly ash addition and limestone filler. A SCC prepared with Portland cement, river sand, and limestone filler was used as a reference sample. Additional experimental self-compacting concretes with different types of fine aggregates, fillers, and special additives for increasing freeze-thaw resistance were prepared and optimized. The correlation between mix design, i.e., percentage of barite sand and additives, and properties of fresh SCC (slump-flow test, V-funnel test, and L-box test), as well as properties of hardened SCC (compressive strengths), were investigated and discussed.",
journal = "International RILEM Conference on Synergising Expertise towards Sustainability and Robustness of Cement-based Materials and Concrete Structures",
title = "Influence of Aggregate Type on the Properties on SCC with Fly Ash",
doi = "10.1007/978-3-031-33187-9_5"
}

Janković, K., Stojanović, M., Bojović, D.,& Terzić, A.. (2023). Influence of Aggregate Type on the Properties on SCC with Fly Ash. in International RILEM Conference on Synergising Expertise towards Sustainability and Robustness of Cement-based Materials and Concrete Structures.
https://doi.org/10.1007/978-3-031-33187-9_5

Janković K, Stojanović M, Bojović D, Terzić A. Influence of Aggregate Type on the Properties on SCC with Fly Ash. in International RILEM Conference on Synergising Expertise towards Sustainability and Robustness of Cement-based Materials and Concrete Structures. 2023;.
doi:10.1007/978-3-031-33187-9_5 .

Janković, Ksenija, Stojanović, Marko, Bojović, Dragan, Terzić, Anja, "Influence of Aggregate Type on the Properties on SCC with Fly Ash" in International RILEM Conference on Synergising Expertise towards Sustainability and Robustness of Cement-based Materials and Concrete Structures (2023),
https://doi.org/10.1007/978-3-031-33187-9_5 . .

TY  - CONF
AU  - Janković, Ksenija
AU  - Stanković, Srboljub
AU  - Bojović, Dragan
AU  - Stojanović, Marko
AU  - Antić Aranđelović, Lana
AU  - Terzić, Anja
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/575
AB  - The impacts of nano-silica addition, steel micro-reinforcement, and aggregate type on the mechanical properties and durability of ultra-high-performance concrete (UHPC) were studied. As aggregates, quartz and barite were used. The amounts of steel fibers and nano-silica were alternated. Six concrete mixes were produced with quartz sand, and the remaining six concrete mixes were designed with barite sand. Fibers made about 3-5% of the concrete composition’s mass. In a 2-5% concentration, nano-silica was used as a cement replacement. The inclusion of nano-silica significantly boosted the compressive strength of UHPC. The compressive and flexural strengths were also positively impacted by fiber supplementation ranging from 3% to 5%. The amount of fiber utilized proved to be more influential than the aggregate used. The UHPC concrete's durability was increased as all samples were highly resistant to freezing and thawing cycles. UHPC designed with barite aggregate demonstrated good X and gamma ray absorption at energies below 300 keV.
C3  - Serbian Ceramic Society Conference “Advanced Ceramic and Application XI – New frontiers in multifunctional material science and processing”, Book of Abstracts, Belgrade, Serbia
T1  - Heavyweight Ultra-High-Performance Concrete with Micro-Reinforcement
SP  - 83
UR  - https://hdl.handle.net/21.15107/rcub_rims_575
ER  - 

@conference{
author = "Janković, Ksenija and Stanković, Srboljub and Bojović, Dragan and Stojanović, Marko and Antić Aranđelović, Lana and Terzić, Anja",
year = "2023",
abstract = "The impacts of nano-silica addition, steel micro-reinforcement, and aggregate type on the mechanical properties and durability of ultra-high-performance concrete (UHPC) were studied. As aggregates, quartz and barite were used. The amounts of steel fibers and nano-silica were alternated. Six concrete mixes were produced with quartz sand, and the remaining six concrete mixes were designed with barite sand. Fibers made about 3-5% of the concrete composition’s mass. In a 2-5% concentration, nano-silica was used as a cement replacement. The inclusion of nano-silica significantly boosted the compressive strength of UHPC. The compressive and flexural strengths were also positively impacted by fiber supplementation ranging from 3% to 5%. The amount of fiber utilized proved to be more influential than the aggregate used. The UHPC concrete's durability was increased as all samples were highly resistant to freezing and thawing cycles. UHPC designed with barite aggregate demonstrated good X and gamma ray absorption at energies below 300 keV.",
journal = "Serbian Ceramic Society Conference “Advanced Ceramic and Application XI – New frontiers in multifunctional material science and processing”, Book of Abstracts, Belgrade, Serbia",
title = "Heavyweight Ultra-High-Performance Concrete with Micro-Reinforcement",
pages = "83",
url = "https://hdl.handle.net/21.15107/rcub_rims_575"
}

Janković, K., Stanković, S., Bojović, D., Stojanović, M., Antić Aranđelović, L.,& Terzić, A.. (2023). Heavyweight Ultra-High-Performance Concrete with Micro-Reinforcement. in Serbian Ceramic Society Conference “Advanced Ceramic and Application XI – New frontiers in multifunctional material science and processing”, Book of Abstracts, Belgrade, Serbia, 83.
https://hdl.handle.net/21.15107/rcub_rims_575

Janković K, Stanković S, Bojović D, Stojanović M, Antić Aranđelović L, Terzić A. Heavyweight Ultra-High-Performance Concrete with Micro-Reinforcement. in Serbian Ceramic Society Conference “Advanced Ceramic and Application XI – New frontiers in multifunctional material science and processing”, Book of Abstracts, Belgrade, Serbia. 2023;:83.
https://hdl.handle.net/21.15107/rcub_rims_575 .

Janković, Ksenija, Stanković, Srboljub, Bojović, Dragan, Stojanović, Marko, Antić Aranđelović, Lana, Terzić, Anja, "Heavyweight Ultra-High-Performance Concrete with Micro-Reinforcement" in Serbian Ceramic Society Conference “Advanced Ceramic and Application XI – New frontiers in multifunctional material science and processing”, Book of Abstracts, Belgrade, Serbia (2023):83,
https://hdl.handle.net/21.15107/rcub_rims_575 .

TY  - CONF
AU  - Terzić, Anja
AU  - Janković, Ksenija
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/588
AB  - The phyllosilicate mineral pyrophyllite can be utilized in cementitious composites design to replace quartz powder and boost workability, early strengths, and refractoriness. Employed as a mineral additive or microfiller, pyrophyllite is stable at high temperatures owing to its thermal conversion into mullite.
In this study, mortar samples were prepared using andalusite as aggregate, high-alumina cement as a binder, and pyrophyllite as an additive (15%, 25%, and 35%). Compressive and flexural strengths, both at normal and elevated temperatures (samples were thermally treated at 1000°C) were tested on the samples, along with the refractoriness. The effects of pyrophyllite addition on the mineral composition, microstructure, and bonding and sintering mechanisms were studied using instrumental analytical techniques. Pyrophyllite acted as additional pozzolana during cement hydration as it formed microreinforcement
in the shape of crystalline folia within the microstructure, which improved the
compressive strengths of mortars. The differential thermal analysis highlighted that pyrophyllite did not negatively interfere with the cement hydration route; moreover, this mineral additive behaved as pozzolana. The investigation demonstrated that pyrophyllite additions of up to 25% can be used in cementitious composites without affecting their performance.
C3  - Proceedings of the 20th International symposium of MASE, Skopje, Republic of North Macedonia
T1  - The design of cementitious composites with advanced thermal properties
EP  - 1188
SP  - 1183
UR  - https://hdl.handle.net/21.15107/rcub_rims_588
ER  - 

@conference{
author = "Terzić, Anja and Janković, Ksenija",
year = "2023",
abstract = "The phyllosilicate mineral pyrophyllite can be utilized in cementitious composites design to replace quartz powder and boost workability, early strengths, and refractoriness. Employed as a mineral additive or microfiller, pyrophyllite is stable at high temperatures owing to its thermal conversion into mullite.
In this study, mortar samples were prepared using andalusite as aggregate, high-alumina cement as a binder, and pyrophyllite as an additive (15%, 25%, and 35%). Compressive and flexural strengths, both at normal and elevated temperatures (samples were thermally treated at 1000°C) were tested on the samples, along with the refractoriness. The effects of pyrophyllite addition on the mineral composition, microstructure, and bonding and sintering mechanisms were studied using instrumental analytical techniques. Pyrophyllite acted as additional pozzolana during cement hydration as it formed microreinforcement
in the shape of crystalline folia within the microstructure, which improved the
compressive strengths of mortars. The differential thermal analysis highlighted that pyrophyllite did not negatively interfere with the cement hydration route; moreover, this mineral additive behaved as pozzolana. The investigation demonstrated that pyrophyllite additions of up to 25% can be used in cementitious composites without affecting their performance.",
journal = "Proceedings of the 20th International symposium of MASE, Skopje, Republic of North Macedonia",
title = "The design of cementitious composites with advanced thermal properties",
pages = "1188-1183",
url = "https://hdl.handle.net/21.15107/rcub_rims_588"
}

Terzić, A.,& Janković, K.. (2023). The design of cementitious composites with advanced thermal properties. in Proceedings of the 20th International symposium of MASE, Skopje, Republic of North Macedonia, 1183-1188.
https://hdl.handle.net/21.15107/rcub_rims_588

Terzić A, Janković K. The design of cementitious composites with advanced thermal properties. in Proceedings of the 20th International symposium of MASE, Skopje, Republic of North Macedonia. 2023;:1183-1188.
https://hdl.handle.net/21.15107/rcub_rims_588 .

Terzić, Anja, Janković, Ksenija, "The design of cementitious composites with advanced thermal properties" in Proceedings of the 20th International symposium of MASE, Skopje, Republic of North Macedonia (2023):1183-1188,
https://hdl.handle.net/21.15107/rcub_rims_588 .

TY  - CONF
AU  - Janković, Ksenija
AU  - Bojović, Dragan
AU  - Stojanović, Marko
AU  - Terzić, Anja
AU  - Stanković, Srboljub
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/586
AB  - Fly ash is a highly efficient mineral additive whose role is reflected in improvements of microstructure packing, strength and durability of non-shaped composite building materials such as self-compacting concrete (SCC). A comparative study of performances of SCC with fly ash and standard SCC with limestone filler was conducted.Additional experimental self-compacting concretes with different types of fine aggregates, fillers, and special additives for increasing freeze-thaw resistance were prepared and optimized. The correlation between percentage of barite sand and additives, and properties of SCC, were
investigated and discussed. Main topic of these article is testing the resistance of concrete to penetration of water under pressure.
C3  - Proceedings of the 20th International symposium of MASE, Skopje, Republic of North Macedonia
T1  - The properties of heavyweight self-compacting concrete on water penetration under pressure
EP  - 1020
SP  - 1014
UR  - https://hdl.handle.net/21.15107/rcub_rims_586
ER  - 

@conference{
author = "Janković, Ksenija and Bojović, Dragan and Stojanović, Marko and Terzić, Anja and Stanković, Srboljub",
year = "2023",
abstract = "Fly ash is a highly efficient mineral additive whose role is reflected in improvements of microstructure packing, strength and durability of non-shaped composite building materials such as self-compacting concrete (SCC). A comparative study of performances of SCC with fly ash and standard SCC with limestone filler was conducted.Additional experimental self-compacting concretes with different types of fine aggregates, fillers, and special additives for increasing freeze-thaw resistance were prepared and optimized. The correlation between percentage of barite sand and additives, and properties of SCC, were
investigated and discussed. Main topic of these article is testing the resistance of concrete to penetration of water under pressure.",
journal = "Proceedings of the 20th International symposium of MASE, Skopje, Republic of North Macedonia",
title = "The properties of heavyweight self-compacting concrete on water penetration under pressure",
pages = "1020-1014",
url = "https://hdl.handle.net/21.15107/rcub_rims_586"
}

Janković, K., Bojović, D., Stojanović, M., Terzić, A.,& Stanković, S.. (2023). The properties of heavyweight self-compacting concrete on water penetration under pressure. in Proceedings of the 20th International symposium of MASE, Skopje, Republic of North Macedonia, 1014-1020.
https://hdl.handle.net/21.15107/rcub_rims_586

Janković K, Bojović D, Stojanović M, Terzić A, Stanković S. The properties of heavyweight self-compacting concrete on water penetration under pressure. in Proceedings of the 20th International symposium of MASE, Skopje, Republic of North Macedonia. 2023;:1014-1020.
https://hdl.handle.net/21.15107/rcub_rims_586 .

Janković, Ksenija, Bojović, Dragan, Stojanović, Marko, Terzić, Anja, Stanković, Srboljub, "The properties of heavyweight self-compacting concrete on water penetration under pressure" in Proceedings of the 20th International symposium of MASE, Skopje, Republic of North Macedonia (2023):1014-1020,
https://hdl.handle.net/21.15107/rcub_rims_586 .

TY  - GEN
AU  - Terzić, Anja
AU  - Vasić, Milica
PY  - 2023
UR  - https://www.mdpi.com/journal/materials/special_issues/silicate_based_construction_building_materials
UR  - http://rims.institutims.rs/handle/123456789/584
PB  - MDPI, Basel
T2  - Construction and Building Materials
T1  - Science and Technology for Silicate-Based Construction and Building Materials, A special issue of Materials
UR  - https://hdl.handle.net/21.15107/rcub_rims_584
ER  - 

@misc{
author = "Terzić, Anja and Vasić, Milica",
year = "2023",
publisher = "MDPI, Basel",
journal = "Construction and Building Materials",
title = "Science and Technology for Silicate-Based Construction and Building Materials, A special issue of Materials",
url = "https://hdl.handle.net/21.15107/rcub_rims_584"
}

Terzić, A.,& Vasić, M.. (2023). Science and Technology for Silicate-Based Construction and Building Materials, A special issue of Materials. in Construction and Building Materials
MDPI, Basel..
https://hdl.handle.net/21.15107/rcub_rims_584

Terzić A, Vasić M. Science and Technology for Silicate-Based Construction and Building Materials, A special issue of Materials. in Construction and Building Materials. 2023;.
https://hdl.handle.net/21.15107/rcub_rims_584 .

Terzić, Anja, Vasić, Milica, "Science and Technology for Silicate-Based Construction and Building Materials, A special issue of Materials" in Construction and Building Materials (2023),
https://hdl.handle.net/21.15107/rcub_rims_584 .

TY  - CONF
AU  - Terzić, Anja
AU  - Mijatović, Nevenka
AU  - Miličić, Ljiljana
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/576
AB  - Many studies on techniques for diminishing the environmental impact, reducing greenhouse gas emissions, and decreasing industrial and biowaste have been conducted with the mutual goal of achieving sustainable development. The use of industrial byproducts as raw materials for cement clinker production is becoming more common in the Portland cement industry. Eggshell is a biowaste produced in huge quantities by households and the food industry. Eggshell powder has a trigonal-calcite structure and properties similar to limestone; therefore, it can substitute limestone in the cement clinker mix design. In this work, bio-waste cement was produced at temperatures below the standard 1470°C utilizing mechanically activated eggshell powder. Under the same conditions as bio-waste cement, limestone cement clinker was also synthesized. Instrumental tests (X-ray diffraction, scanning electron microscopy, differential scanning calorimetry, and thermogravimetry analysis) were employed to analyze the mineral phases in the produced cements. The results showed that eggshell-cement had four major cement clinker phases (C3S, C2S, C3A, and C4AF) that were identical to those in ordinary commercial Portland cement. As a result, this study demonstrated that it is possible to recycle eggshell waste to partially substitute limestone as a raw material for cement clinker manufacturing.
C3  - “Advanced Ceramic and Application XI – New frontiers in multifunctional material science and processing”, Book of Abstracts, Belgrade Serbia
T1  - Development of recycled cement made from biowaste
EP  - 84
SP  - 83
UR  - https://hdl.handle.net/21.15107/rcub_rims_576
ER  - 

@conference{
author = "Terzić, Anja and Mijatović, Nevenka and Miličić, Ljiljana",
year = "2023",
abstract = "Many studies on techniques for diminishing the environmental impact, reducing greenhouse gas emissions, and decreasing industrial and biowaste have been conducted with the mutual goal of achieving sustainable development. The use of industrial byproducts as raw materials for cement clinker production is becoming more common in the Portland cement industry. Eggshell is a biowaste produced in huge quantities by households and the food industry. Eggshell powder has a trigonal-calcite structure and properties similar to limestone; therefore, it can substitute limestone in the cement clinker mix design. In this work, bio-waste cement was produced at temperatures below the standard 1470°C utilizing mechanically activated eggshell powder. Under the same conditions as bio-waste cement, limestone cement clinker was also synthesized. Instrumental tests (X-ray diffraction, scanning electron microscopy, differential scanning calorimetry, and thermogravimetry analysis) were employed to analyze the mineral phases in the produced cements. The results showed that eggshell-cement had four major cement clinker phases (C3S, C2S, C3A, and C4AF) that were identical to those in ordinary commercial Portland cement. As a result, this study demonstrated that it is possible to recycle eggshell waste to partially substitute limestone as a raw material for cement clinker manufacturing.",
journal = "“Advanced Ceramic and Application XI – New frontiers in multifunctional material science and processing”, Book of Abstracts, Belgrade Serbia",
title = "Development of recycled cement made from biowaste",
pages = "84-83",
url = "https://hdl.handle.net/21.15107/rcub_rims_576"
}

Terzić, A., Mijatović, N.,& Miličić, L.. (2023). Development of recycled cement made from biowaste. in “Advanced Ceramic and Application XI – New frontiers in multifunctional material science and processing”, Book of Abstracts, Belgrade Serbia, 83-84.
https://hdl.handle.net/21.15107/rcub_rims_576

Terzić A, Mijatović N, Miličić L. Development of recycled cement made from biowaste. in “Advanced Ceramic and Application XI – New frontiers in multifunctional material science and processing”, Book of Abstracts, Belgrade Serbia. 2023;:83-84.
https://hdl.handle.net/21.15107/rcub_rims_576 .

Terzić, Anja, Mijatović, Nevenka, Miličić, Ljiljana, "Development of recycled cement made from biowaste" in “Advanced Ceramic and Application XI – New frontiers in multifunctional material science and processing”, Book of Abstracts, Belgrade Serbia (2023):83-84,
https://hdl.handle.net/21.15107/rcub_rims_576 .

TY  - CONF
AU  - Radulović, Dragan
AU  - Jovanović, Vladimir
AU  - Todorović, Dejan
AU  - Ivošević, Branislav
AU  - Stojanović, Jovica
AU  - Milićević, Sonja
AU  - Terzić, Anja
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/574
AB  - According to earlier physical-chemical and mineralogical analysis, slag from "Topionica"- Veles (Northern Macedonia) represents a potentially important raw resource. It is an inhomogeneous raw material with considerable nonferrous metal content, particularly Pb, Zn, Cu, and Ag (considered as a precious metal). This technogenic resource's mineralogical analysis revealed a very complex composition: amorphous phase, lead alloys, zinc alloys, wüstite (FeO), sphalerite, galena, cerussite, elemental silver, elemental copper, elemental iron, magnetite, spinel, rutile, hematite, troilite (FeS). The most abundant phase is an amorphous phase (glassy matrix) composed of spinel, silicate, and mixed (spinel-silicate). The sample has substantially less wüstite, that appears as skeletal inclusions in the glassy matrix. SEM investigation revealed the presence of Fe-Mn-Zn spinels in the Pb-Zn slag, as well as Pb and Zn alloys. These alloys are primarily composed of Cu. The grains of these phases are up to 100μm appearing as inclusions (usually as complex inclusions with a glassy matrix of elemental iron and wüstite). Grains bigger than 100μm in length are typically free or have simple inclusions. The biggest grains in the aforementioned stages have diameters of up to 300μm. The mineralogical study revealed that the Pb-Zn slag is a very complex raw material. It is required to investigate it in detail and establish the methods in which it can be done in order to value it and eventually apply it. Every stage of the preparation process has to be accompanied by numerous analyzes that will indicate the relevance of the preparation process and ways of concentrating useful components into commercial products.
C3  - Serbian Ceramic Society Conference “Advanced Ceramic and Application XI – New frontiers in multifunctional material science and processing”, Book of Abstracts, Belgrade, Serbia
T1  - Technical features of Pb-Zn slag that allow its valorization and application
SP  - 81
UR  - https://hdl.handle.net/21.15107/rcub_rims_574
ER  - 

@conference{
author = "Radulović, Dragan and Jovanović, Vladimir and Todorović, Dejan and Ivošević, Branislav and Stojanović, Jovica and Milićević, Sonja and Terzić, Anja",
year = "2023",
abstract = "According to earlier physical-chemical and mineralogical analysis, slag from "Topionica"- Veles (Northern Macedonia) represents a potentially important raw resource. It is an inhomogeneous raw material with considerable nonferrous metal content, particularly Pb, Zn, Cu, and Ag (considered as a precious metal). This technogenic resource's mineralogical analysis revealed a very complex composition: amorphous phase, lead alloys, zinc alloys, wüstite (FeO), sphalerite, galena, cerussite, elemental silver, elemental copper, elemental iron, magnetite, spinel, rutile, hematite, troilite (FeS). The most abundant phase is an amorphous phase (glassy matrix) composed of spinel, silicate, and mixed (spinel-silicate). The sample has substantially less wüstite, that appears as skeletal inclusions in the glassy matrix. SEM investigation revealed the presence of Fe-Mn-Zn spinels in the Pb-Zn slag, as well as Pb and Zn alloys. These alloys are primarily composed of Cu. The grains of these phases are up to 100μm appearing as inclusions (usually as complex inclusions with a glassy matrix of elemental iron and wüstite). Grains bigger than 100μm in length are typically free or have simple inclusions. The biggest grains in the aforementioned stages have diameters of up to 300μm. The mineralogical study revealed that the Pb-Zn slag is a very complex raw material. It is required to investigate it in detail and establish the methods in which it can be done in order to value it and eventually apply it. Every stage of the preparation process has to be accompanied by numerous analyzes that will indicate the relevance of the preparation process and ways of concentrating useful components into commercial products.",
journal = "Serbian Ceramic Society Conference “Advanced Ceramic and Application XI – New frontiers in multifunctional material science and processing”, Book of Abstracts, Belgrade, Serbia",
title = "Technical features of Pb-Zn slag that allow its valorization and application",
pages = "81",
url = "https://hdl.handle.net/21.15107/rcub_rims_574"
}

Radulović, D., Jovanović, V., Todorović, D., Ivošević, B., Stojanović, J., Milićević, S.,& Terzić, A.. (2023). Technical features of Pb-Zn slag that allow its valorization and application. in Serbian Ceramic Society Conference “Advanced Ceramic and Application XI – New frontiers in multifunctional material science and processing”, Book of Abstracts, Belgrade, Serbia, 81.
https://hdl.handle.net/21.15107/rcub_rims_574

Radulović D, Jovanović V, Todorović D, Ivošević B, Stojanović J, Milićević S, Terzić A. Technical features of Pb-Zn slag that allow its valorization and application. in Serbian Ceramic Society Conference “Advanced Ceramic and Application XI – New frontiers in multifunctional material science and processing”, Book of Abstracts, Belgrade, Serbia. 2023;:81.
https://hdl.handle.net/21.15107/rcub_rims_574 .

Radulović, Dragan, Jovanović, Vladimir, Todorović, Dejan, Ivošević, Branislav, Stojanović, Jovica, Milićević, Sonja, Terzić, Anja, "Technical features of Pb-Zn slag that allow its valorization and application" in Serbian Ceramic Society Conference “Advanced Ceramic and Application XI – New frontiers in multifunctional material science and processing”, Book of Abstracts, Belgrade, Serbia (2023):81,
https://hdl.handle.net/21.15107/rcub_rims_574 .

TY  - JOUR
AU  - Mijatović, Nevenka
AU  - Vasić, Milica
AU  - Terzić, Anja
AU  - Radomirović, Milena
AU  - Miličić, Ljiljana
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/577
AB  - The chemical compositions of refractory materials, such as high-alumina concrete, bricks, and putty, were analyzed using an energy-dispersive X-ray spectrometer (EDXRF). An improved methodology for investigating the effect of particle size on the outcomes of EDXRF chemical analysis is presented. Eight independent refractory samples (refractory concrete, brick, and putty) were pulverized utilizing seven milling times (30, 60, 120, 180, 240, 300, and 360 s) and compared to non-pulverized samples. Thus, sixty-four refractory samples were obtained and analyzed using EDXRF. The method for measuring the fundamental EDXRF characteristics was then tested with ten certified reference materials. The acquired data were compared using inductively coupled plasma atomic emission spectrometry (ICP-OES). Univariate and multivariate statistics are used to evaluate EDXRF data. The particle size of the tested samples affected the z-scores of SiO2, Al2O3, Fe2O3, TiO2, CaO, MgO, Na2O, K2O, and P2O5 concentration measurements. Grinding times for refractory concrete, brick, and putty samples were determined in order to validate the robustness of the EDXRF technique and provide reliable chemical analyses. The ideal milling times for the samples studied ranged from 180 to 360 s, depending on the type of refractory material.
T2  - Spectrochimica Acta Part B: Atomic Spectroscopy
T1  - An augmented approach for the determination of the particle size effect on energy dispersive X-ray fluorescence analysis outcomes for alumina-based refractory materials
IS  - 106796
VL  - 209
DO  - 10.1016/j.sab.2023.106796
ER  - 

@article{
author = "Mijatović, Nevenka and Vasić, Milica and Terzić, Anja and Radomirović, Milena and Miličić, Ljiljana",
year = "2023",
abstract = "The chemical compositions of refractory materials, such as high-alumina concrete, bricks, and putty, were analyzed using an energy-dispersive X-ray spectrometer (EDXRF). An improved methodology for investigating the effect of particle size on the outcomes of EDXRF chemical analysis is presented. Eight independent refractory samples (refractory concrete, brick, and putty) were pulverized utilizing seven milling times (30, 60, 120, 180, 240, 300, and 360 s) and compared to non-pulverized samples. Thus, sixty-four refractory samples were obtained and analyzed using EDXRF. The method for measuring the fundamental EDXRF characteristics was then tested with ten certified reference materials. The acquired data were compared using inductively coupled plasma atomic emission spectrometry (ICP-OES). Univariate and multivariate statistics are used to evaluate EDXRF data. The particle size of the tested samples affected the z-scores of SiO2, Al2O3, Fe2O3, TiO2, CaO, MgO, Na2O, K2O, and P2O5 concentration measurements. Grinding times for refractory concrete, brick, and putty samples were determined in order to validate the robustness of the EDXRF technique and provide reliable chemical analyses. The ideal milling times for the samples studied ranged from 180 to 360 s, depending on the type of refractory material.",
journal = "Spectrochimica Acta Part B: Atomic Spectroscopy",
title = "An augmented approach for the determination of the particle size effect on energy dispersive X-ray fluorescence analysis outcomes for alumina-based refractory materials",
number = "106796",
volume = "209",
doi = "10.1016/j.sab.2023.106796"
}

Mijatović, N., Vasić, M., Terzić, A., Radomirović, M.,& Miličić, L.. (2023). An augmented approach for the determination of the particle size effect on energy dispersive X-ray fluorescence analysis outcomes for alumina-based refractory materials. in Spectrochimica Acta Part B: Atomic Spectroscopy, 209(106796).
https://doi.org/10.1016/j.sab.2023.106796

Mijatović N, Vasić M, Terzić A, Radomirović M, Miličić L. An augmented approach for the determination of the particle size effect on energy dispersive X-ray fluorescence analysis outcomes for alumina-based refractory materials. in Spectrochimica Acta Part B: Atomic Spectroscopy. 2023;209(106796).
doi:10.1016/j.sab.2023.106796 .

Mijatović, Nevenka, Vasić, Milica, Terzić, Anja, Radomirović, Milena, Miličić, Ljiljana, "An augmented approach for the determination of the particle size effect on energy dispersive X-ray fluorescence analysis outcomes for alumina-based refractory materials" in Spectrochimica Acta Part B: Atomic Spectroscopy, 209, no. 106796 (2023),
https://doi.org/10.1016/j.sab.2023.106796 . .

TY  - JOUR
AU  - Mijatović, Nevenka
AU  - Terzić, Anja
AU  - Miličić, Ljiljana
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/488
AB  - Natural zeolite and bentonite were used as mineral addi-tions to create cement-based building materials that are safe for the environment. This research focuses on the adsorptive qualities of these two clay raw materials, i.e., their propen-sity to immobilize heavy metal ions like Cd2+. The acquired results were examined using kinetic models of pseudo-first and pseudo-second order. The isotherms of Langmuir and Freundlich were examined. Zeolite and bentonite had differ-ent adsorption affinities for Cd2+ cations. Seven cement binders with various mineral additions (fly ash, zeolite, bentonite) underwent a leaching test. The adsorption and hydration mechanisms that immobilized heavy metals within cementitious composites caused leachates obtained on cement samples with the addition of fly ash and clay (either zeolite or bentonite) to contain lower concentrations of Cd2+ ions than leachates obtained on cement samples with fly ash alone.
T2  - Structural Integrity and Life, Special Issue
T1  - Effective removal of the heavy metal ion Cd2+ from the structure of cementitious materials with mineral additives
EP  - 24
SP  - 19
VL  - 23
UR  - https://hdl.handle.net/21.15107/rcub_rims_488
ER  - 

@article{
author = "Mijatović, Nevenka and Terzić, Anja and Miličić, Ljiljana",
year = "2023",
abstract = "Natural zeolite and bentonite were used as mineral addi-tions to create cement-based building materials that are safe for the environment. This research focuses on the adsorptive qualities of these two clay raw materials, i.e., their propen-sity to immobilize heavy metal ions like Cd2+. The acquired results were examined using kinetic models of pseudo-first and pseudo-second order. The isotherms of Langmuir and Freundlich were examined. Zeolite and bentonite had differ-ent adsorption affinities for Cd2+ cations. Seven cement binders with various mineral additions (fly ash, zeolite, bentonite) underwent a leaching test. The adsorption and hydration mechanisms that immobilized heavy metals within cementitious composites caused leachates obtained on cement samples with the addition of fly ash and clay (either zeolite or bentonite) to contain lower concentrations of Cd2+ ions than leachates obtained on cement samples with fly ash alone.",
journal = "Structural Integrity and Life, Special Issue",
title = "Effective removal of the heavy metal ion Cd2+ from the structure of cementitious materials with mineral additives",
pages = "24-19",
volume = "23",
url = "https://hdl.handle.net/21.15107/rcub_rims_488"
}

Mijatović, N., Terzić, A.,& Miličić, L.. (2023). Effective removal of the heavy metal ion Cd2+ from the structure of cementitious materials with mineral additives. in Structural Integrity and Life, Special Issue, 23, 19-24.
https://hdl.handle.net/21.15107/rcub_rims_488

Mijatović N, Terzić A, Miličić L. Effective removal of the heavy metal ion Cd2+ from the structure of cementitious materials with mineral additives. in Structural Integrity and Life, Special Issue. 2023;23:19-24.
https://hdl.handle.net/21.15107/rcub_rims_488 .

Mijatović, Nevenka, Terzić, Anja, Miličić, Ljiljana, "Effective removal of the heavy metal ion Cd2+ from the structure of cementitious materials with mineral additives" in Structural Integrity and Life, Special Issue, 23 (2023):19-24,
https://hdl.handle.net/21.15107/rcub_rims_488 .

TY  - CONF
AU  - Janković, Ksenija
AU  - Stanković, Srboljub
AU  - Terzić, Anja
AU  - Stojanović, Marko
AU  - Bojović, Dragan
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/559
AB  - During the implementation of procedures for designing building barriers for protection against gamma and X radiation, the unavoidable question of choosing construction materials with appropriate mechanical and radiation characteristics for protective barriers arises. Based on engineering practice, it is necessary to compare different types of concrete used for the construction of facilities where there are sources of gamma and X radiation, such as in cases where radiation sources appear in medical facilities with linear accelerators, cyclotron installations for accelerating nuclear particles, in the environment of nuclear reactors, in radioactive waste storages, or in radiation sterilization unit s. In the cost-benefit analysis, several criteria are used to evaluate the characteristics of the concrete, so that in addition to the mechanical characteristics, the radiation characteristics of the construction material are also considered. One of the most important characteristics of concrete for radiation protection is its total mass attenuation coefficient. In this paper, computer code XCOM was used for the calculation of the total mass attenuation coefficients in energy range from 0.01MeV to 100 MeV for three types of concrete: ordinary concrete, concrete with barite and concrete with limonite and steel. Based on the comparison of calculation results, it was concluded that concrete with limonite and steel has greater protective power than other two concrete types for the gamma and X radiation energy less than 30 keV. The second important conclusion is that the concrete with barite has greater protective power than other two concrete types in the range of photon energy from 30 keV to 300 keV, and for photon energy greater than 6 MeV. A detailed analysis of the calculation results found that in the energy range of 400 keV to 6 MeV values for the total mass attenuation coefficients are approximately the same for three different types of concrete.
C3  - RAP 2023 International Conference on Radiation Applications, Book of Abstracts
T1  - Comparison of gamma and X radiation attentuation characteristics for ordinary concrete with barite and concrete with limonite and steel
SP  - 64
UR  - https://hdl.handle.net/21.15107/rcub_rims_559
ER  - 

@conference{
author = "Janković, Ksenija and Stanković, Srboljub and Terzić, Anja and Stojanović, Marko and Bojović, Dragan",
year = "2023",
abstract = "During the implementation of procedures for designing building barriers for protection against gamma and X radiation, the unavoidable question of choosing construction materials with appropriate mechanical and radiation characteristics for protective barriers arises. Based on engineering practice, it is necessary to compare different types of concrete used for the construction of facilities where there are sources of gamma and X radiation, such as in cases where radiation sources appear in medical facilities with linear accelerators, cyclotron installations for accelerating nuclear particles, in the environment of nuclear reactors, in radioactive waste storages, or in radiation sterilization unit s. In the cost-benefit analysis, several criteria are used to evaluate the characteristics of the concrete, so that in addition to the mechanical characteristics, the radiation characteristics of the construction material are also considered. One of the most important characteristics of concrete for radiation protection is its total mass attenuation coefficient. In this paper, computer code XCOM was used for the calculation of the total mass attenuation coefficients in energy range from 0.01MeV to 100 MeV for three types of concrete: ordinary concrete, concrete with barite and concrete with limonite and steel. Based on the comparison of calculation results, it was concluded that concrete with limonite and steel has greater protective power than other two concrete types for the gamma and X radiation energy less than 30 keV. The second important conclusion is that the concrete with barite has greater protective power than other two concrete types in the range of photon energy from 30 keV to 300 keV, and for photon energy greater than 6 MeV. A detailed analysis of the calculation results found that in the energy range of 400 keV to 6 MeV values for the total mass attenuation coefficients are approximately the same for three different types of concrete.",
journal = "RAP 2023 International Conference on Radiation Applications, Book of Abstracts",
title = "Comparison of gamma and X radiation attentuation characteristics for ordinary concrete with barite and concrete with limonite and steel",
pages = "64",
url = "https://hdl.handle.net/21.15107/rcub_rims_559"
}

Janković, K., Stanković, S., Terzić, A., Stojanović, M.,& Bojović, D.. (2023). Comparison of gamma and X radiation attentuation characteristics for ordinary concrete with barite and concrete with limonite and steel. in RAP 2023 International Conference on Radiation Applications, Book of Abstracts, 64.
https://hdl.handle.net/21.15107/rcub_rims_559

Janković K, Stanković S, Terzić A, Stojanović M, Bojović D. Comparison of gamma and X radiation attentuation characteristics for ordinary concrete with barite and concrete with limonite and steel. in RAP 2023 International Conference on Radiation Applications, Book of Abstracts. 2023;:64.
https://hdl.handle.net/21.15107/rcub_rims_559 .

Janković, Ksenija, Stanković, Srboljub, Terzić, Anja, Stojanović, Marko, Bojović, Dragan, "Comparison of gamma and X radiation attentuation characteristics for ordinary concrete with barite and concrete with limonite and steel" in RAP 2023 International Conference on Radiation Applications, Book of Abstracts (2023):64,
https://hdl.handle.net/21.15107/rcub_rims_559 .

TY  - CONF
AU  - Janković, Ksenija
AU  - Stanković, Srboljub
AU  - Terzić, Anja
AU  - Bojović, Dragan
AU  - Stojanović, Marko
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/558
AB  - During the implementation of construction barrier design procedures for protection against gamma and X radiation, the inevitable question arises of choosing building materials with suitable mechanical and radiation characteristics for protective barriers. Based on engineering practice, it is necessary to compare different types of concrete used for the construction of buildings in which there are sources of gamma and X radiation, as in cases where radiation sources appear in medical institutions with linear accelerators, cyclotron installations for the acceleration of nuclear particles, in the environment of nuclear reactors, in radioactive waste warehouses or in radiation sterilization units. In the analysis of costs and benefits, several criteria are used to evaluate the characteristics of concrete, so that, in addition to the mechanical ones, the radiation characteristics of the building material are also taken into account. One of the most important characteristics of radiation shielding concrete is its overall mass attenuation coefficient. In this paper, the XCOM computer code was used to calculate the total mass attenuation coefficients in the energy range from 0.01 MeV to 100 MeV for three types of concrete: ultrahight properties concrete (UHPC), concrete with barite and concrete with magnetite and steel. Based on the comparison of the calculation results, it was concluded that concrete with magnetite and steel has a greater protective power than the other two types of concrete for gamma and X radiation energy lower than 30 keV. Another important conclusion is that concrete with barite has a higher protective power than the other two types of concrete in the photon energy range from 30 keV to 300 keV, and for photon energy greater than 6 MeV. A detailed analysis of the calculation results revealed that in the energy range from 400 keV to 6 MeV the values for the total mass attenuation coefficients are approximately the same for three different types of concrete.
C3  - Eleventh International Conference on Radiation, Natural Sciences, Medicine, Engineering, Technology and Ecology, Book of Abstracts
T1  - Gamma and X radiation attenuation characteristics for ultrahigh properties of concrete, concrete with barite and concrete with magnetite and steel
SP  - 239
DO  - 10.21175/rad.abstr.book.2023.36.19
ER  - 

@conference{
author = "Janković, Ksenija and Stanković, Srboljub and Terzić, Anja and Bojović, Dragan and Stojanović, Marko",
year = "2023",
abstract = "During the implementation of construction barrier design procedures for protection against gamma and X radiation, the inevitable question arises of choosing building materials with suitable mechanical and radiation characteristics for protective barriers. Based on engineering practice, it is necessary to compare different types of concrete used for the construction of buildings in which there are sources of gamma and X radiation, as in cases where radiation sources appear in medical institutions with linear accelerators, cyclotron installations for the acceleration of nuclear particles, in the environment of nuclear reactors, in radioactive waste warehouses or in radiation sterilization units. In the analysis of costs and benefits, several criteria are used to evaluate the characteristics of concrete, so that, in addition to the mechanical ones, the radiation characteristics of the building material are also taken into account. One of the most important characteristics of radiation shielding concrete is its overall mass attenuation coefficient. In this paper, the XCOM computer code was used to calculate the total mass attenuation coefficients in the energy range from 0.01 MeV to 100 MeV for three types of concrete: ultrahight properties concrete (UHPC), concrete with barite and concrete with magnetite and steel. Based on the comparison of the calculation results, it was concluded that concrete with magnetite and steel has a greater protective power than the other two types of concrete for gamma and X radiation energy lower than 30 keV. Another important conclusion is that concrete with barite has a higher protective power than the other two types of concrete in the photon energy range from 30 keV to 300 keV, and for photon energy greater than 6 MeV. A detailed analysis of the calculation results revealed that in the energy range from 400 keV to 6 MeV the values for the total mass attenuation coefficients are approximately the same for three different types of concrete.",
journal = "Eleventh International Conference on Radiation, Natural Sciences, Medicine, Engineering, Technology and Ecology, Book of Abstracts",
title = "Gamma and X radiation attenuation characteristics for ultrahigh properties of concrete, concrete with barite and concrete with magnetite and steel",
pages = "239",
doi = "10.21175/rad.abstr.book.2023.36.19"
}

Janković, K., Stanković, S., Terzić, A., Bojović, D.,& Stojanović, M.. (2023). Gamma and X radiation attenuation characteristics for ultrahigh properties of concrete, concrete with barite and concrete with magnetite and steel. in Eleventh International Conference on Radiation, Natural Sciences, Medicine, Engineering, Technology and Ecology, Book of Abstracts, 239.
https://doi.org/10.21175/rad.abstr.book.2023.36.19

Janković K, Stanković S, Terzić A, Bojović D, Stojanović M. Gamma and X radiation attenuation characteristics for ultrahigh properties of concrete, concrete with barite and concrete with magnetite and steel. in Eleventh International Conference on Radiation, Natural Sciences, Medicine, Engineering, Technology and Ecology, Book of Abstracts. 2023;:239.
doi:10.21175/rad.abstr.book.2023.36.19 .

Janković, Ksenija, Stanković, Srboljub, Terzić, Anja, Bojović, Dragan, Stojanović, Marko, "Gamma and X radiation attenuation characteristics for ultrahigh properties of concrete, concrete with barite and concrete with magnetite and steel" in Eleventh International Conference on Radiation, Natural Sciences, Medicine, Engineering, Technology and Ecology, Book of Abstracts (2023):239,
https://doi.org/10.21175/rad.abstr.book.2023.36.19 . .

TY  - JOUR
AU  - Bojović, Dragan
AU  - Terzić, Anja
AU  - Nikolić, Dragan
AU  - Janković, Ksenija
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/503
AB  - The experimental study included the design and production of ultra-high-performance steel fiber-reinforced concrete (UHPFRC). The physical and mechanical properties of UHPFRC were investigated in a laboratory setting. To investigate the properties of UHPFR concrete, three types of concrete and over 70 samples were used. Following that, samples were created to test the anchors' load-bearing performance. Six concrete slabs with a total of 108 pre-installed anchor samples and six concrete slabs with 108 post-installed chemical anchor samples were created. The analysis of the test findings comprised all individual results as well as the definition of the relationship between the anchor's tensile load capacity and other parameters. To accurately determine the individual influence of the investigated factors as well as their combined impact, a factorial experiment, and artificial neural networks were used in addition to normal statistical numerical studies. It was determined that both approaches offer advantages. The results obtained show matches in certain parts. Due to the way data is processed in different ways, there are also significant differences between them.
T2  - Science of Sintering 2023 OnLine-First Issue 00
T1  - Determination of the effects of the rebar-cement bond parameters variation in UHPFRC using FA and ANN
DO  - 10.2298/SOS230420029B
ER  - 

@article{
author = "Bojović, Dragan and Terzić, Anja and Nikolić, Dragan and Janković, Ksenija",
year = "2023",
abstract = "The experimental study included the design and production of ultra-high-performance steel fiber-reinforced concrete (UHPFRC). The physical and mechanical properties of UHPFRC were investigated in a laboratory setting. To investigate the properties of UHPFR concrete, three types of concrete and over 70 samples were used. Following that, samples were created to test the anchors' load-bearing performance. Six concrete slabs with a total of 108 pre-installed anchor samples and six concrete slabs with 108 post-installed chemical anchor samples were created. The analysis of the test findings comprised all individual results as well as the definition of the relationship between the anchor's tensile load capacity and other parameters. To accurately determine the individual influence of the investigated factors as well as their combined impact, a factorial experiment, and artificial neural networks were used in addition to normal statistical numerical studies. It was determined that both approaches offer advantages. The results obtained show matches in certain parts. Due to the way data is processed in different ways, there are also significant differences between them.",
journal = "Science of Sintering 2023 OnLine-First Issue 00",
title = "Determination of the effects of the rebar-cement bond parameters variation in UHPFRC using FA and ANN",
doi = "10.2298/SOS230420029B"
}

Bojović, D., Terzić, A., Nikolić, D.,& Janković, K.. (2023). Determination of the effects of the rebar-cement bond parameters variation in UHPFRC using FA and ANN. in Science of Sintering 2023 OnLine-First Issue 00.
https://doi.org/10.2298/SOS230420029B

Bojović D, Terzić A, Nikolić D, Janković K. Determination of the effects of the rebar-cement bond parameters variation in UHPFRC using FA and ANN. in Science of Sintering 2023 OnLine-First Issue 00. 2023;.
doi:10.2298/SOS230420029B .

Bojović, Dragan, Terzić, Anja, Nikolić, Dragan, Janković, Ksenija, "Determination of the effects of the rebar-cement bond parameters variation in UHPFRC using FA and ANN" in Science of Sintering 2023 OnLine-First Issue 00 (2023),
https://doi.org/10.2298/SOS230420029B . .

TY  - CONF
AU  - Janković, Ksenija
AU  - Stojanović, Marko
AU  - Bojović, Dragan
AU  - Terzić, Anja
AU  - Stanković, Srboljub
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/502
AB  - Compared to traditional concrete, self-compacting concrete (SCC) demonstrates greater flowability, which is achieved by including an extra high percentage of ultra-fine particles. As a result, the required high paste content is obtained while the cement content is strictly limited. The coal combustion byproduct (fly ash) is one of the most efficient SCC fillers because it extends the lifecycle of SCC by improving its microstructural properties, strength, and durability. In this study, the amounts of fly ash in SCC compositions varied. The changes in physical and mechanical characteristics of fresh SCC samples related to variations in the water/binder ratio were monitored.
PB  - University of Belgrade, Technical Faculty in Bor
C3  - XI International Mineral Processing & Recycling Conference – IMPRC Proceedings
T1  - Application of coal combustion byproducts in self-compacting concrete: influence on flowability
EP  - 584
SP  - 579
UR  - https://hdl.handle.net/21.15107/rcub_rims_502
ER  - 

@conference{
author = "Janković, Ksenija and Stojanović, Marko and Bojović, Dragan and Terzić, Anja and Stanković, Srboljub",
year = "2023",
abstract = "Compared to traditional concrete, self-compacting concrete (SCC) demonstrates greater flowability, which is achieved by including an extra high percentage of ultra-fine particles. As a result, the required high paste content is obtained while the cement content is strictly limited. The coal combustion byproduct (fly ash) is one of the most efficient SCC fillers because it extends the lifecycle of SCC by improving its microstructural properties, strength, and durability. In this study, the amounts of fly ash in SCC compositions varied. The changes in physical and mechanical characteristics of fresh SCC samples related to variations in the water/binder ratio were monitored.",
publisher = "University of Belgrade, Technical Faculty in Bor",
journal = "XI International Mineral Processing & Recycling Conference – IMPRC Proceedings",
title = "Application of coal combustion byproducts in self-compacting concrete: influence on flowability",
pages = "584-579",
url = "https://hdl.handle.net/21.15107/rcub_rims_502"
}

Janković, K., Stojanović, M., Bojović, D., Terzić, A.,& Stanković, S.. (2023). Application of coal combustion byproducts in self-compacting concrete: influence on flowability. in XI International Mineral Processing & Recycling Conference – IMPRC Proceedings
University of Belgrade, Technical Faculty in Bor., 579-584.
https://hdl.handle.net/21.15107/rcub_rims_502

Janković K, Stojanović M, Bojović D, Terzić A, Stanković S. Application of coal combustion byproducts in self-compacting concrete: influence on flowability. in XI International Mineral Processing & Recycling Conference – IMPRC Proceedings. 2023;:579-584.
https://hdl.handle.net/21.15107/rcub_rims_502 .

Janković, Ksenija, Stojanović, Marko, Bojović, Dragan, Terzić, Anja, Stanković, Srboljub, "Application of coal combustion byproducts in self-compacting concrete: influence on flowability" in XI International Mineral Processing & Recycling Conference – IMPRC Proceedings (2023):579-584,
https://hdl.handle.net/21.15107/rcub_rims_502 .

TY  - JOUR
AU  - Terzić, Anja
AU  - Vasić, Milica
AU  - Stojanović, Jovica
AU  - Pavlović, Vladimir
AU  - Radojević, Zagorka
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/485
AB  - Phyllosilicate mineral pyrophyllite is predominantly used in the ceramic industry because it exhibits high refractoriness. Due to its thermal transformation into mullite, pyrophyllite is stable at elevated temperatures, making it a suitable mineral additive for refractory non-shaped materials and various ceramic shaped products. In this study, pyrophyllite is employed as 50 % clay replacement in the ceramics and up to 30 % cement replacement in mortars. Physico-mechanical properties were investigated. The firing shrinkage in the ceramics treated at 1200°C was reduced by pyrophyllite addition. Pyrophyllite acted as additional pozzolana during cement hydration. Within the microstructure, it formed micro-reinforcement in the shape of crystalline folia, which improves the mechanical properties of ordinary Portland cement, high aluminate cement, and blended cement mortars. The investigation proved the efficiency and suitability of pyrophyllite employed as a substitution for clay in ceramics and a cement replacement in mortars.
T2  - Science of Sintering 2023 OnLine-First Issue 00
T1  - Application of pyrophyllite in high-temperature treated building materials
SP  - 14
DO  - 10.2298/SOS220610014T
ER  - 

@article{
author = "Terzić, Anja and Vasić, Milica and Stojanović, Jovica and Pavlović, Vladimir and Radojević, Zagorka",
year = "2023",
abstract = "Phyllosilicate mineral pyrophyllite is predominantly used in the ceramic industry because it exhibits high refractoriness. Due to its thermal transformation into mullite, pyrophyllite is stable at elevated temperatures, making it a suitable mineral additive for refractory non-shaped materials and various ceramic shaped products. In this study, pyrophyllite is employed as 50 % clay replacement in the ceramics and up to 30 % cement replacement in mortars. Physico-mechanical properties were investigated. The firing shrinkage in the ceramics treated at 1200°C was reduced by pyrophyllite addition. Pyrophyllite acted as additional pozzolana during cement hydration. Within the microstructure, it formed micro-reinforcement in the shape of crystalline folia, which improves the mechanical properties of ordinary Portland cement, high aluminate cement, and blended cement mortars. The investigation proved the efficiency and suitability of pyrophyllite employed as a substitution for clay in ceramics and a cement replacement in mortars.",
journal = "Science of Sintering 2023 OnLine-First Issue 00",
title = "Application of pyrophyllite in high-temperature treated building materials",
pages = "14",
doi = "10.2298/SOS220610014T"
}

Terzić, A., Vasić, M., Stojanović, J., Pavlović, V.,& Radojević, Z.. (2023). Application of pyrophyllite in high-temperature treated building materials. in Science of Sintering 2023 OnLine-First Issue 00, 14.
https://doi.org/10.2298/SOS220610014T

Terzić A, Vasić M, Stojanović J, Pavlović V, Radojević Z. Application of pyrophyllite in high-temperature treated building materials. in Science of Sintering 2023 OnLine-First Issue 00. 2023;:14.
doi:10.2298/SOS220610014T .

Terzić, Anja, Vasić, Milica, Stojanović, Jovica, Pavlović, Vladimir, Radojević, Zagorka, "Application of pyrophyllite in high-temperature treated building materials" in Science of Sintering 2023 OnLine-First Issue 00 (2023):14,
https://doi.org/10.2298/SOS220610014T . .

TY  - JOUR
AU  - Terzić, Anja
AU  - Pezo, Milada
AU  - Pezo, Lato
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/499
AB  - The machine learning technique for prediction and optimization of building material performances became an essential feature in the contemporary civil engineering. The Artificial Neural Network (ANN) prognosis of mortar behavior was conducted in this study. The model appraised the design and characteristics of seventeen either building or high-temperature mortars. Seven different cement types were employed. Seventeen mineral additives of primary and secondary origin were embedded in the mortar mixtures. Cluster Analysis and Principal Component Analysis designated groups of similar mortars assigning them a specific purpose based on monitored characteristics. ANN foresaw the quality of designed mortars. The impact of implemented raw materials on the mortar quality was assessed and evaluated. ANN outputs highlighted the high suitability level of anticipation, i.e., 0.999 during the training period, which is regarded appropriate enough to correctly predict the observed outputs in a wide range of processing parameters. Due to the high predictive accuracy, ANN can replace or be used in combination with standard destructive tests thereby saving the construction industry time, resources, and capital. Good performances of altered cement mortars are positive sign for widening of economical mineral additives application in building materials and making progress towards achieved carbon neutrality by reducing its emission.
T2  - Science of Sintering
T1  - Application of Artificial Neural Networks in Performance Prediction of Cement Mortars with Various Mineral Additives
EP  - 27
IS  - 1
SP  - 11
VL  - 55
DO  - 10.2298/SOS2301011T
ER  - 

@article{
author = "Terzić, Anja and Pezo, Milada and Pezo, Lato",
year = "2023",
abstract = "The machine learning technique for prediction and optimization of building material performances became an essential feature in the contemporary civil engineering. The Artificial Neural Network (ANN) prognosis of mortar behavior was conducted in this study. The model appraised the design and characteristics of seventeen either building or high-temperature mortars. Seven different cement types were employed. Seventeen mineral additives of primary and secondary origin were embedded in the mortar mixtures. Cluster Analysis and Principal Component Analysis designated groups of similar mortars assigning them a specific purpose based on monitored characteristics. ANN foresaw the quality of designed mortars. The impact of implemented raw materials on the mortar quality was assessed and evaluated. ANN outputs highlighted the high suitability level of anticipation, i.e., 0.999 during the training period, which is regarded appropriate enough to correctly predict the observed outputs in a wide range of processing parameters. Due to the high predictive accuracy, ANN can replace or be used in combination with standard destructive tests thereby saving the construction industry time, resources, and capital. Good performances of altered cement mortars are positive sign for widening of economical mineral additives application in building materials and making progress towards achieved carbon neutrality by reducing its emission.",
journal = "Science of Sintering",
title = "Application of Artificial Neural Networks in Performance Prediction of Cement Mortars with Various Mineral Additives",
pages = "27-11",
number = "1",
volume = "55",
doi = "10.2298/SOS2301011T"
}

Terzić, A., Pezo, M.,& Pezo, L.. (2023). Application of Artificial Neural Networks in Performance Prediction of Cement Mortars with Various Mineral Additives. in Science of Sintering, 55(1), 11-27.
https://doi.org/10.2298/SOS2301011T

Terzić A, Pezo M, Pezo L. Application of Artificial Neural Networks in Performance Prediction of Cement Mortars with Various Mineral Additives. in Science of Sintering. 2023;55(1):11-27.
doi:10.2298/SOS2301011T .

Terzić, Anja, Pezo, Milada, Pezo, Lato, "Application of Artificial Neural Networks in Performance Prediction of Cement Mortars with Various Mineral Additives" in Science of Sintering, 55, no. 1 (2023):11-27,
https://doi.org/10.2298/SOS2301011T . .

TY  - JOUR
AU  - Radojević, Zagorka
AU  - Terzić, Anja
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/487
AB  - Institut IMS ima lidersku poziciju među multidisciplinar-nim naučno-istraživačkim organizacijama u Srbiji i regionu. Visoko je pozicioniran u oblasti građevinarstva i inženjer-stva. IMS poseduje jedinstveni spoj naučno-istraživačkog rada i saradnje sa privredom kao vrlo važne karike u lancu primenljivosti i održivosti rešenja i rezultata istraživačkog rada. IMS je decenijama simbol znanja u oblasti građevi-narstva i industrije građevinskih materijala, što aktivno nastavlja kroz aktuelne i planirane naučno-istraživačke aktivnosti - razvojna istraživanja, realizaciju u privredi, primenu najnovijih saznanja i savremenih tehnologija.
T2  - Integritet i vek konstrukcija, specijalno izdanje
T1  - Doprinos Instituta IMS razvoju građevinskih materijala (kratak istorijat, pregled stanja i pogledi ka budućnosti)
EP  - 11
SP  - 5
VL  - 23
UR  - https://hdl.handle.net/21.15107/rcub_rims_487
ER  - 

@article{
author = "Radojević, Zagorka and Terzić, Anja",
year = "2023",
abstract = "Institut IMS ima lidersku poziciju među multidisciplinar-nim naučno-istraživačkim organizacijama u Srbiji i regionu. Visoko je pozicioniran u oblasti građevinarstva i inženjer-stva. IMS poseduje jedinstveni spoj naučno-istraživačkog rada i saradnje sa privredom kao vrlo važne karike u lancu primenljivosti i održivosti rešenja i rezultata istraživačkog rada. IMS je decenijama simbol znanja u oblasti građevi-narstva i industrije građevinskih materijala, što aktivno nastavlja kroz aktuelne i planirane naučno-istraživačke aktivnosti - razvojna istraživanja, realizaciju u privredi, primenu najnovijih saznanja i savremenih tehnologija.",
journal = "Integritet i vek konstrukcija, specijalno izdanje",
title = "Doprinos Instituta IMS razvoju građevinskih materijala (kratak istorijat, pregled stanja i pogledi ka budućnosti)",
pages = "11-5",
volume = "23",
url = "https://hdl.handle.net/21.15107/rcub_rims_487"
}

Radojević, Z.,& Terzić, A.. (2023). Doprinos Instituta IMS razvoju građevinskih materijala (kratak istorijat, pregled stanja i pogledi ka budućnosti). in Integritet i vek konstrukcija, specijalno izdanje, 23, 5-11.
https://hdl.handle.net/21.15107/rcub_rims_487

Radojević Z, Terzić A. Doprinos Instituta IMS razvoju građevinskih materijala (kratak istorijat, pregled stanja i pogledi ka budućnosti). in Integritet i vek konstrukcija, specijalno izdanje. 2023;23:5-11.
https://hdl.handle.net/21.15107/rcub_rims_487 .

Radojević, Zagorka, Terzić, Anja, "Doprinos Instituta IMS razvoju građevinskih materijala (kratak istorijat, pregled stanja i pogledi ka budućnosti)" in Integritet i vek konstrukcija, specijalno izdanje, 23 (2023):5-11,
https://hdl.handle.net/21.15107/rcub_rims_487 .

TY  - CONF
AU  - Mijatović, Nevenka
AU  - Terzić, Anja
AU  - Miličić, Ljiljana
PY  - 2022
UR  - http://rims.institutims.rs/handle/123456789/512
AB  - Prirodni zeolit i bentonit korišćeni su kao mineralni aditivi za pripremu građevinskih kompozita na bazi cementa bezbednih za životnu sredinu. Ovo istraživanje se fokusira na adsorpcione kvalitete i mehanizme ove dve glinene sirovine, odnosno njihovu sklonost ka imobilizaciji jona teških metala poput Mn2+. Dobijeni rezultati su ispitani korišćenjem kinetičkih modela pseudo-prvog i pseudo-drugog reda. Ispitane su Langmirove i Frojndlihove izoterme. Zeolit i bentonit imaju različite adsorpcione afinitete za Mn2+ katjone. Sedam cementnih kompozita sa različitim mineralnim dodacima (leteći pepeo, zeolit, bentonit) podvrgnuto je ispitivanju luženja. Mehanizmi adsorpcije i hidratacije koji su imobilisali teške metale unutar cementnih kompozita doveli su do toga da eluati dobijeni na uzorcima cementa sa dodatkom letećeg pepela i gline (zeolit ili bentonit) sadrže niže koncentracije Mn2+ jona od procednih voda dobijenih na uzorcima cementa sa elektrofilterskim pepelom.
C3  - XXVIII Kongres DIMK i IX Kongres SIGP sa međunarodnim simpozijumom o istraživanjima i primeni savremenih dostignuća u građevinarstvu u oblasti materijala i konstrukcija – Zbornik radova
T1  - Mehanizmi adsorpcije jona Mn2+ u strukturu kompozita na bazi cementa i mineralnih aditiva
EP  - 207
SP  - 199
UR  - https://hdl.handle.net/21.15107/rcub_rims_512
ER  - 

@conference{
author = "Mijatović, Nevenka and Terzić, Anja and Miličić, Ljiljana",
year = "2022",
abstract = "Prirodni zeolit i bentonit korišćeni su kao mineralni aditivi za pripremu građevinskih kompozita na bazi cementa bezbednih za životnu sredinu. Ovo istraživanje se fokusira na adsorpcione kvalitete i mehanizme ove dve glinene sirovine, odnosno njihovu sklonost ka imobilizaciji jona teških metala poput Mn2+. Dobijeni rezultati su ispitani korišćenjem kinetičkih modela pseudo-prvog i pseudo-drugog reda. Ispitane su Langmirove i Frojndlihove izoterme. Zeolit i bentonit imaju različite adsorpcione afinitete za Mn2+ katjone. Sedam cementnih kompozita sa različitim mineralnim dodacima (leteći pepeo, zeolit, bentonit) podvrgnuto je ispitivanju luženja. Mehanizmi adsorpcije i hidratacije koji su imobilisali teške metale unutar cementnih kompozita doveli su do toga da eluati dobijeni na uzorcima cementa sa dodatkom letećeg pepela i gline (zeolit ili bentonit) sadrže niže koncentracije Mn2+ jona od procednih voda dobijenih na uzorcima cementa sa elektrofilterskim pepelom.",
journal = "XXVIII Kongres DIMK i IX Kongres SIGP sa međunarodnim simpozijumom o istraživanjima i primeni savremenih dostignuća u građevinarstvu u oblasti materijala i konstrukcija – Zbornik radova",
title = "Mehanizmi adsorpcije jona Mn2+ u strukturu kompozita na bazi cementa i mineralnih aditiva",
pages = "207-199",
url = "https://hdl.handle.net/21.15107/rcub_rims_512"
}

Mijatović, N., Terzić, A.,& Miličić, L.. (2022). Mehanizmi adsorpcije jona Mn2+ u strukturu kompozita na bazi cementa i mineralnih aditiva. in XXVIII Kongres DIMK i IX Kongres SIGP sa međunarodnim simpozijumom o istraživanjima i primeni savremenih dostignuća u građevinarstvu u oblasti materijala i konstrukcija – Zbornik radova, 199-207.
https://hdl.handle.net/21.15107/rcub_rims_512

Mijatović N, Terzić A, Miličić L. Mehanizmi adsorpcije jona Mn2+ u strukturu kompozita na bazi cementa i mineralnih aditiva. in XXVIII Kongres DIMK i IX Kongres SIGP sa međunarodnim simpozijumom o istraživanjima i primeni savremenih dostignuća u građevinarstvu u oblasti materijala i konstrukcija – Zbornik radova. 2022;:199-207.
https://hdl.handle.net/21.15107/rcub_rims_512 .

Mijatović, Nevenka, Terzić, Anja, Miličić, Ljiljana, "Mehanizmi adsorpcije jona Mn2+ u strukturu kompozita na bazi cementa i mineralnih aditiva" in XXVIII Kongres DIMK i IX Kongres SIGP sa međunarodnim simpozijumom o istraživanjima i primeni savremenih dostignuća u građevinarstvu u oblasti materijala i konstrukcija – Zbornik radova (2022):199-207,
https://hdl.handle.net/21.15107/rcub_rims_512 .

TY  - CONF
AU  - Janković, Ksenija
AU  - Stojanović, Marko
AU  - Bojović, Dragan
AU  - Terzić, Anja
AU  - Stanković, Srboljub
PY  - 2022
UR  - http://rims.institutims.rs/handle/123456789/510
AB  - Self-compacting concrete (SCC) exhibits increased flowability in comparison with the conventional vibrated concrete. This is most often achieved through the incorporation of high amounts of extra-fine particles (i.e. mineral fillers) in the composition of self-compacting concrete. The purpose is to limit the share of cement while reaching the required large paste content. The components and their proportions, as well as type and particle size of filler, casting, manufacturing and curing conditions of SCC, significantly influence the concrete’s fresh and hardened properties. Among fillers employed in SCC, fly ash is one of the most frequent due to its availability and the low cost. Fly as is an industrial by-product and a highly efficient mineral additive whose role is reflected in improvements of microstructure packing, strength and durability of non-shaped composite building materials such as self-compacting concrete. A comparative study of performances of SCC with different quantities of fly ash and standard SCC with limestone filler was conducted in this study. The experimental program included the production of reference self-compacting concrete based on Portland cement and limestone filler (P1) and additional three experimental self-compacting concrete mixtures (P2, P3, P4) with different quantities of fly ash addition. Behaviour of self-compacting concrete in the fresh state is primarily influenced by type of mineral additive used. The effect that fly ash addition has on the physical behaviour and mechanical properties of fresh experimental SCC concrete samples was discussed. The properties and technology of self-compacting concretes in their fresh state in regard to the alternations in water/cement (w/c) ratios are monitored and explained in this paper. Concrete mixtures with fly ash had lower density in comparisons with the referent concrete. For the same class of consistency, higher amount of water was needed for preparation of SCC mixture with fly ash. Increasing w/c ratio induced more favourable properties of self-compacting concrete in its fresh state.
C3  - Proceeding of the 8th International Conference "Civil engineering-science and practice" -GNP 2022
T1  - Influence of water/cement ratio on the properties of fresh SCC with fly ash addition
UR  - https://hdl.handle.net/21.15107/rcub_rims_510
ER  - 

@conference{
author = "Janković, Ksenija and Stojanović, Marko and Bojović, Dragan and Terzić, Anja and Stanković, Srboljub",
year = "2022",
abstract = "Self-compacting concrete (SCC) exhibits increased flowability in comparison with the conventional vibrated concrete. This is most often achieved through the incorporation of high amounts of extra-fine particles (i.e. mineral fillers) in the composition of self-compacting concrete. The purpose is to limit the share of cement while reaching the required large paste content. The components and their proportions, as well as type and particle size of filler, casting, manufacturing and curing conditions of SCC, significantly influence the concrete’s fresh and hardened properties. Among fillers employed in SCC, fly ash is one of the most frequent due to its availability and the low cost. Fly as is an industrial by-product and a highly efficient mineral additive whose role is reflected in improvements of microstructure packing, strength and durability of non-shaped composite building materials such as self-compacting concrete. A comparative study of performances of SCC with different quantities of fly ash and standard SCC with limestone filler was conducted in this study. The experimental program included the production of reference self-compacting concrete based on Portland cement and limestone filler (P1) and additional three experimental self-compacting concrete mixtures (P2, P3, P4) with different quantities of fly ash addition. Behaviour of self-compacting concrete in the fresh state is primarily influenced by type of mineral additive used. The effect that fly ash addition has on the physical behaviour and mechanical properties of fresh experimental SCC concrete samples was discussed. The properties and technology of self-compacting concretes in their fresh state in regard to the alternations in water/cement (w/c) ratios are monitored and explained in this paper. Concrete mixtures with fly ash had lower density in comparisons with the referent concrete. For the same class of consistency, higher amount of water was needed for preparation of SCC mixture with fly ash. Increasing w/c ratio induced more favourable properties of self-compacting concrete in its fresh state.",
journal = "Proceeding of the 8th International Conference "Civil engineering-science and practice" -GNP 2022",
title = "Influence of water/cement ratio on the properties of fresh SCC with fly ash addition",
url = "https://hdl.handle.net/21.15107/rcub_rims_510"
}

Janković, K., Stojanović, M., Bojović, D., Terzić, A.,& Stanković, S.. (2022). Influence of water/cement ratio on the properties of fresh SCC with fly ash addition. in Proceeding of the 8th International Conference "Civil engineering-science and practice" -GNP 2022.
https://hdl.handle.net/21.15107/rcub_rims_510

Janković K, Stojanović M, Bojović D, Terzić A, Stanković S. Influence of water/cement ratio on the properties of fresh SCC with fly ash addition. in Proceeding of the 8th International Conference "Civil engineering-science and practice" -GNP 2022. 2022;.
https://hdl.handle.net/21.15107/rcub_rims_510 .

Janković, Ksenija, Stojanović, Marko, Bojović, Dragan, Terzić, Anja, Stanković, Srboljub, "Influence of water/cement ratio on the properties of fresh SCC with fly ash addition" in Proceeding of the 8th International Conference "Civil engineering-science and practice" -GNP 2022 (2022),
https://hdl.handle.net/21.15107/rcub_rims_510 .

TY  - CONF
AU  - Janković, Ksenija
AU  - Stojanović, Marko
AU  - Bojović, Dragan
AU  - Terzić, Anja
AU  - Stanković, Srboljub
PY  - 2022
UR  - http://rims.institutims.rs/handle/123456789/511
AB  - Leteći pepeo je visoko efikasan mineralni aditiv čija se uloga ogleda u poboljšanju mikrostrukture, čvrstoće i izdržljivosti kompozitnih građevinskih materijala kao što je samozbijajući beton (SCC). Referentni SCC je projktovan sa portland cementom, rečnim agregatom i krečnjačkim filerom. Eksperimentalni program obuhvatao je proizvodnju pet samozbijajućih betona sa različitim vrstama sitnog agregata, filera i specijalnog dodatka za povećanje otpornosti na dejstvo mraza. Ispitivani su i diskutovani efekti koje baritni pesak i dodaci imaju na svojstva svežeg SCC (sleganje rasprostiranjem, test V-levka i test L-kutije) i čvrstoću pri pritisku.
C3  - XXVIII Kongres DIMK i IX Kongres SIGP sa međunarodnim simpozijumom o istraživanjima i primeni savremenih dostignuća u građevinarstvu u oblasti materijala i konstrukcija – Zbornik radova
T1  - Svojstva teškog SCC sa letećim pepelom
EP  - 396
SP  - 389
UR  - https://hdl.handle.net/21.15107/rcub_rims_511
ER  - 

@conference{
author = "Janković, Ksenija and Stojanović, Marko and Bojović, Dragan and Terzić, Anja and Stanković, Srboljub",
year = "2022",
abstract = "Leteći pepeo je visoko efikasan mineralni aditiv čija se uloga ogleda u poboljšanju mikrostrukture, čvrstoće i izdržljivosti kompozitnih građevinskih materijala kao što je samozbijajući beton (SCC). Referentni SCC je projktovan sa portland cementom, rečnim agregatom i krečnjačkim filerom. Eksperimentalni program obuhvatao je proizvodnju pet samozbijajućih betona sa različitim vrstama sitnog agregata, filera i specijalnog dodatka za povećanje otpornosti na dejstvo mraza. Ispitivani su i diskutovani efekti koje baritni pesak i dodaci imaju na svojstva svežeg SCC (sleganje rasprostiranjem, test V-levka i test L-kutije) i čvrstoću pri pritisku.",
journal = "XXVIII Kongres DIMK i IX Kongres SIGP sa međunarodnim simpozijumom o istraživanjima i primeni savremenih dostignuća u građevinarstvu u oblasti materijala i konstrukcija – Zbornik radova",
title = "Svojstva teškog SCC sa letećim pepelom",
pages = "396-389",
url = "https://hdl.handle.net/21.15107/rcub_rims_511"
}

Janković, K., Stojanović, M., Bojović, D., Terzić, A.,& Stanković, S.. (2022). Svojstva teškog SCC sa letećim pepelom. in XXVIII Kongres DIMK i IX Kongres SIGP sa međunarodnim simpozijumom o istraživanjima i primeni savremenih dostignuća u građevinarstvu u oblasti materijala i konstrukcija – Zbornik radova, 389-396.
https://hdl.handle.net/21.15107/rcub_rims_511

Janković K, Stojanović M, Bojović D, Terzić A, Stanković S. Svojstva teškog SCC sa letećim pepelom. in XXVIII Kongres DIMK i IX Kongres SIGP sa međunarodnim simpozijumom o istraživanjima i primeni savremenih dostignuća u građevinarstvu u oblasti materijala i konstrukcija – Zbornik radova. 2022;:389-396.
https://hdl.handle.net/21.15107/rcub_rims_511 .

Janković, Ksenija, Stojanović, Marko, Bojović, Dragan, Terzić, Anja, Stanković, Srboljub, "Svojstva teškog SCC sa letećim pepelom" in XXVIII Kongres DIMK i IX Kongres SIGP sa međunarodnim simpozijumom o istraživanjima i primeni savremenih dostignuća u građevinarstvu u oblasti materijala i konstrukcija – Zbornik radova (2022):389-396,
https://hdl.handle.net/21.15107/rcub_rims_511 .

TY  - CONF
AU  - Vasić, Milica
AU  - Terzić, Anja
AU  - Radojević, Zagorka
PY  - 2022
UR  - http://rims.institutims.rs/handle/123456789/509
AB  - Phyllosilicate mineral pyrophyllite possesses talc’s characteristic softness and crystalline structure, but it also exhibits high refractoriness. Pyrophyllite is predominantly being used in the ceramic materials (tiles, porcelain) as a replacement of quartz, clay or feldspar. Due to its thermal transformation into mullite, pyrophyllite is stable at elevated temperatures. Its ion-exchanging properties are crucial for stabilization of the toxic elements in building materials. In this study pyrophyllite is used as a mineral additive for two types of construction products: traditional ceramic materials and refractory mortars. The experimental samples were prepared using 50 % of pyrophyllite and 50 % of refractory clay, ceramic clay, and carbonate brick clay, respectively. The samples were formed into discs or tiles using the compression method. The following characteristics have been investigated: resistance to firing (900 – 1300°C), carbonate content, plasticity coefficient, dimensional changes after drying at 105°C and upon firing, water absorption, and mechanical strength. Refractory samples were prepared using andalusite as aggregate, ordinary Portland cement and/or high aluminate cement as binder, and pyrophyllite as an additive (10 %, 20 %, and 30 %). Compressive and flexural strength both at normal and at elevated temperature were tested on the samples, along with the refractoriness. The changes that pyrophyllite addition brings to the material’s mineral composition, microstructure, as well as to bonding/sintering mechanisms were monitored using instrumental techniques (DTA, TGA, XRD). The aim of the investigation was to prove potential suitability of pyrophyllite as efficient and sustainable resource for the production of ceramic and refractory materials.
C3  - Serbian Ceramic Society Conference “Advanced Ceramic and Application X – New frontiers in multifunctional material science and processing”, Book of Abstracts
T1  - Application of pyrophyllite in building and refractory ceramic materials
SP  - 93
UR  - https://hdl.handle.net/21.15107/rcub_rims_509
ER  - 

@conference{
author = "Vasić, Milica and Terzić, Anja and Radojević, Zagorka",
year = "2022",
abstract = "Phyllosilicate mineral pyrophyllite possesses talc’s characteristic softness and crystalline structure, but it also exhibits high refractoriness. Pyrophyllite is predominantly being used in the ceramic materials (tiles, porcelain) as a replacement of quartz, clay or feldspar. Due to its thermal transformation into mullite, pyrophyllite is stable at elevated temperatures. Its ion-exchanging properties are crucial for stabilization of the toxic elements in building materials. In this study pyrophyllite is used as a mineral additive for two types of construction products: traditional ceramic materials and refractory mortars. The experimental samples were prepared using 50 % of pyrophyllite and 50 % of refractory clay, ceramic clay, and carbonate brick clay, respectively. The samples were formed into discs or tiles using the compression method. The following characteristics have been investigated: resistance to firing (900 – 1300°C), carbonate content, plasticity coefficient, dimensional changes after drying at 105°C and upon firing, water absorption, and mechanical strength. Refractory samples were prepared using andalusite as aggregate, ordinary Portland cement and/or high aluminate cement as binder, and pyrophyllite as an additive (10 %, 20 %, and 30 %). Compressive and flexural strength both at normal and at elevated temperature were tested on the samples, along with the refractoriness. The changes that pyrophyllite addition brings to the material’s mineral composition, microstructure, as well as to bonding/sintering mechanisms were monitored using instrumental techniques (DTA, TGA, XRD). The aim of the investigation was to prove potential suitability of pyrophyllite as efficient and sustainable resource for the production of ceramic and refractory materials.",
journal = "Serbian Ceramic Society Conference “Advanced Ceramic and Application X – New frontiers in multifunctional material science and processing”, Book of Abstracts",
title = "Application of pyrophyllite in building and refractory ceramic materials",
pages = "93",
url = "https://hdl.handle.net/21.15107/rcub_rims_509"
}

Vasić, M., Terzić, A.,& Radojević, Z.. (2022). Application of pyrophyllite in building and refractory ceramic materials. in Serbian Ceramic Society Conference “Advanced Ceramic and Application X – New frontiers in multifunctional material science and processing”, Book of Abstracts, 93.
https://hdl.handle.net/21.15107/rcub_rims_509

Vasić M, Terzić A, Radojević Z. Application of pyrophyllite in building and refractory ceramic materials. in Serbian Ceramic Society Conference “Advanced Ceramic and Application X – New frontiers in multifunctional material science and processing”, Book of Abstracts. 2022;:93.
https://hdl.handle.net/21.15107/rcub_rims_509 .

Vasić, Milica, Terzić, Anja, Radojević, Zagorka, "Application of pyrophyllite in building and refractory ceramic materials" in Serbian Ceramic Society Conference “Advanced Ceramic and Application X – New frontiers in multifunctional material science and processing”, Book of Abstracts (2022):93,
https://hdl.handle.net/21.15107/rcub_rims_509 .

TY  - CONF
AU  - Janković, Ksenija
AU  - Stojanović, Marko
AU  - Terzić, Anja
AU  - Bojović, Dragan
AU  - Stanković, Srboljub
PY  - 2022
UR  - http://rims.institutims.rs/handle/123456789/508
AB  - A comparative study of performances of self compacting concrete (SCC) with fly ash and limestone filler was conducted. The experimental program included the production of reference SCC designed with Portland cement, river sand and limestone filler and four experimental self compacting concretes with different types of fine aggregates, fillers and special additive to increase freeze-thaw resistance. The effects that different sand and additions have on the properties of fresh SCC (slump-flow test, V-funnel test, and L-box test) and compressive strengths in early ages (3 and 7 days) were investigated and discussed.
C3  - International Congress Proceedings / Association of Structural Engineers of Serbia, 16. Congress, Aranđelovac, Serbia
T1  - Impact of fine aggregate particle size and morphology on the early strengths of SCC
EP  - 429
SP  - 422
UR  - https://hdl.handle.net/21.15107/rcub_rims_508
ER  - 

@conference{
author = "Janković, Ksenija and Stojanović, Marko and Terzić, Anja and Bojović, Dragan and Stanković, Srboljub",
year = "2022",
abstract = "A comparative study of performances of self compacting concrete (SCC) with fly ash and limestone filler was conducted. The experimental program included the production of reference SCC designed with Portland cement, river sand and limestone filler and four experimental self compacting concretes with different types of fine aggregates, fillers and special additive to increase freeze-thaw resistance. The effects that different sand and additions have on the properties of fresh SCC (slump-flow test, V-funnel test, and L-box test) and compressive strengths in early ages (3 and 7 days) were investigated and discussed.",
journal = "International Congress Proceedings / Association of Structural Engineers of Serbia, 16. Congress, Aranđelovac, Serbia",
title = "Impact of fine aggregate particle size and morphology on the early strengths of SCC",
pages = "429-422",
url = "https://hdl.handle.net/21.15107/rcub_rims_508"
}

Janković, K., Stojanović, M., Terzić, A., Bojović, D.,& Stanković, S.. (2022). Impact of fine aggregate particle size and morphology on the early strengths of SCC. in International Congress Proceedings / Association of Structural Engineers of Serbia, 16. Congress, Aranđelovac, Serbia, 422-429.
https://hdl.handle.net/21.15107/rcub_rims_508

Janković K, Stojanović M, Terzić A, Bojović D, Stanković S. Impact of fine aggregate particle size and morphology on the early strengths of SCC. in International Congress Proceedings / Association of Structural Engineers of Serbia, 16. Congress, Aranđelovac, Serbia. 2022;:422-429.
https://hdl.handle.net/21.15107/rcub_rims_508 .

Janković, Ksenija, Stojanović, Marko, Terzić, Anja, Bojović, Dragan, Stanković, Srboljub, "Impact of fine aggregate particle size and morphology on the early strengths of SCC" in International Congress Proceedings / Association of Structural Engineers of Serbia, 16. Congress, Aranđelovac, Serbia (2022):422-429,
https://hdl.handle.net/21.15107/rcub_rims_508 .

TY  - JOUR
AU  - Vasić, Milica
AU  - Terzić, Anja
AU  - Radovanović, Željko
AU  - Radojević, Zagorka
AU  - Warr, L.N.
PY  - 2022
UR  - http://rims.institutims.rs/handle/123456789/414
AB  - Geopolymerization was investigated as an alternative to traditional ceramic products by developing a more sustainable approach that avoids thermal treatment. The study presents the first known alkali-activation of the raw clay and waste clay brick mixture using the solid to liquid ratios of 2.33 and 2.78. Several experimental sets were prepared to harden under varying conditions (2–4 days drying in 60 °C–70 °C and 3 h steam-curing). Non-activated and activated samples were analyzed for their physical and chemical properties after 14, 21, and 28 days. The tile-shaped specimens exhibited better initial drying behavior than the cubes and produced stronger materials with fewer cracks. Pre-curing in steam conditions induced higher flexural strength (13.7 MPa) and water absorption (13.13%) for the geopolymer tiles. The highest Si/Al molar ratio in the amorphous portion of 5.78 induced the best flexural strength. The geopolymerization process showed microstructural changes associated with the appearance of fibrous Na-zeolite nanocrystals. The degree of geopolymerization and zeolite formation was enhanced by steam-curing, but the microstructural stress and heterogeneity induced by the reactions resulted in higher water absorption. Ongoing reactions of amorphization in the bulk material and further crystallization at the surface are documented after 6 months of curing. This first detailed study reveals that the production of geopolymer ceramics from brick waste is possible, but further optimization of the activating solution and curing parameters is required.
PB  - Elsevier Ltd
T2  - Applied Clay Science
T1  - Alkali-activated geopolymerization of a low illitic raw clay and waste brick mixture. An alternative to traditional ceramics
VL  - 218
DO  - 10.1016/j.clay.2022.106410
ER  - 

@article{
author = "Vasić, Milica and Terzić, Anja and Radovanović, Željko and Radojević, Zagorka and Warr, L.N.",
year = "2022",
abstract = "Geopolymerization was investigated as an alternative to traditional ceramic products by developing a more sustainable approach that avoids thermal treatment. The study presents the first known alkali-activation of the raw clay and waste clay brick mixture using the solid to liquid ratios of 2.33 and 2.78. Several experimental sets were prepared to harden under varying conditions (2–4 days drying in 60 °C–70 °C and 3 h steam-curing). Non-activated and activated samples were analyzed for their physical and chemical properties after 14, 21, and 28 days. The tile-shaped specimens exhibited better initial drying behavior than the cubes and produced stronger materials with fewer cracks. Pre-curing in steam conditions induced higher flexural strength (13.7 MPa) and water absorption (13.13%) for the geopolymer tiles. The highest Si/Al molar ratio in the amorphous portion of 5.78 induced the best flexural strength. The geopolymerization process showed microstructural changes associated with the appearance of fibrous Na-zeolite nanocrystals. The degree of geopolymerization and zeolite formation was enhanced by steam-curing, but the microstructural stress and heterogeneity induced by the reactions resulted in higher water absorption. Ongoing reactions of amorphization in the bulk material and further crystallization at the surface are documented after 6 months of curing. This first detailed study reveals that the production of geopolymer ceramics from brick waste is possible, but further optimization of the activating solution and curing parameters is required.",
publisher = "Elsevier Ltd",
journal = "Applied Clay Science",
title = "Alkali-activated geopolymerization of a low illitic raw clay and waste brick mixture. An alternative to traditional ceramics",
volume = "218",
doi = "10.1016/j.clay.2022.106410"
}

Vasić, M., Terzić, A., Radovanović, Ž., Radojević, Z.,& Warr, L.N.. (2022). Alkali-activated geopolymerization of a low illitic raw clay and waste brick mixture. An alternative to traditional ceramics. in Applied Clay Science
Elsevier Ltd., 218.
https://doi.org/10.1016/j.clay.2022.106410

Vasić M, Terzić A, Radovanović Ž, Radojević Z, Warr L. Alkali-activated geopolymerization of a low illitic raw clay and waste brick mixture. An alternative to traditional ceramics. in Applied Clay Science. 2022;218.
doi:10.1016/j.clay.2022.106410 .

Vasić, Milica, Terzić, Anja, Radovanović, Željko, Radojević, Zagorka, Warr, L.N., "Alkali-activated geopolymerization of a low illitic raw clay and waste brick mixture. An alternative to traditional ceramics" in Applied Clay Science, 218 (2022),
https://doi.org/10.1016/j.clay.2022.106410 . .

TY  - JOUR
AU  - Terzić, Anja
AU  - Dojčinović, Marina
AU  - Miličić, Ljiljana
AU  - Stojanović, Jovica
AU  - Radojević, Zagorka
PY  - 2021
UR  - http://rims.institutims.rs/handle/123456789/399
AB  - Micro-silica is a highly efficient mineral additive whose role is reflected in improvements of microstructure packing, strength and durability of non-shaped composite building materials such as concrete and mortar. A comparative study of performances of rendering mortars with different quantities of micro silica was conducted. The experimental program included production of reference mortar based on Portland cement and quartz sand (CM) and three mortars with 5, 10, and 15 % addition of micro silica (SCM-5, SCM-10, and SCM-15). The effect that micro silica addition has on the thermal behavior and mechanical properties of mortars was discussed. Hydration mechanisms and thermally induced reactions were studied at temperatures ranging from ambient to 1100 degrees C by differential thermal analysis. The results were supported by X-ray diffraction analysis. The cementing efficiency of micro silica was assessed by cavitation erosion test. The changes in the morphology of mortar samples prior and upon cavitation testing were monitored by means of the scanning electron microscope imagining. It was found that 5 % of superfine micro silica (SCM-5 mortar) has positive effects on mechanical strengths (15 % increase in compressive strength) due to microstructure densification arising from the successive filling of voids by the micro silica. Addition of micro silica also improved the cavitation erosion resistance in comparison with reference cement mortar (SCM-5 showed cavitation velocity as low as 0.09 mg/min). This qualifies mortars with micro silica addition as building materials which can be safely employed in potential hydro-demolition environment.
PB  - Međunarodni Institut za nauku o sinterovanju, Beograd
T2  - Science of Sintering
T1  - Cavitation Properties of Rendering Mortars with Micro Silica Addition
EP  - 459
IS  - 4
SP  - 445
VL  - 53
DO  - 10.2298/SOS2104445T
ER  - 

@article{
author = "Terzić, Anja and Dojčinović, Marina and Miličić, Ljiljana and Stojanović, Jovica and Radojević, Zagorka",
year = "2021",
abstract = "Micro-silica is a highly efficient mineral additive whose role is reflected in improvements of microstructure packing, strength and durability of non-shaped composite building materials such as concrete and mortar. A comparative study of performances of rendering mortars with different quantities of micro silica was conducted. The experimental program included production of reference mortar based on Portland cement and quartz sand (CM) and three mortars with 5, 10, and 15 % addition of micro silica (SCM-5, SCM-10, and SCM-15). The effect that micro silica addition has on the thermal behavior and mechanical properties of mortars was discussed. Hydration mechanisms and thermally induced reactions were studied at temperatures ranging from ambient to 1100 degrees C by differential thermal analysis. The results were supported by X-ray diffraction analysis. The cementing efficiency of micro silica was assessed by cavitation erosion test. The changes in the morphology of mortar samples prior and upon cavitation testing were monitored by means of the scanning electron microscope imagining. It was found that 5 % of superfine micro silica (SCM-5 mortar) has positive effects on mechanical strengths (15 % increase in compressive strength) due to microstructure densification arising from the successive filling of voids by the micro silica. Addition of micro silica also improved the cavitation erosion resistance in comparison with reference cement mortar (SCM-5 showed cavitation velocity as low as 0.09 mg/min). This qualifies mortars with micro silica addition as building materials which can be safely employed in potential hydro-demolition environment.",
publisher = "Međunarodni Institut za nauku o sinterovanju, Beograd",
journal = "Science of Sintering",
title = "Cavitation Properties of Rendering Mortars with Micro Silica Addition",
pages = "459-445",
number = "4",
volume = "53",
doi = "10.2298/SOS2104445T"
}

Terzić, A., Dojčinović, M., Miličić, L., Stojanović, J.,& Radojević, Z.. (2021). Cavitation Properties of Rendering Mortars with Micro Silica Addition. in Science of Sintering
Međunarodni Institut za nauku o sinterovanju, Beograd., 53(4), 445-459.
https://doi.org/10.2298/SOS2104445T

Terzić A, Dojčinović M, Miličić L, Stojanović J, Radojević Z. Cavitation Properties of Rendering Mortars with Micro Silica Addition. in Science of Sintering. 2021;53(4):445-459.
doi:10.2298/SOS2104445T .

Terzić, Anja, Dojčinović, Marina, Miličić, Ljiljana, Stojanović, Jovica, Radojević, Zagorka, "Cavitation Properties of Rendering Mortars with Micro Silica Addition" in Science of Sintering, 53, no. 4 (2021):445-459,
https://doi.org/10.2298/SOS2104445T . .

TY  - JOUR
AU  - Miličić, Ljiljana
AU  - Terzić, Anja
AU  - Pezo, Lato
AU  - Mijatović, Nevenka
AU  - Brceski, Ilija
AU  - Vukelić, Nikola
PY  - 2021
UR  - http://rims.institutims.rs/handle/123456789/400
AB  - Rare earth elements (REE) are frequently referred to as ingredients for enhancements in modem industry, as they are extensively applied in many industrial branches due to their accented electro-magnetic and optical properties. REE have end-utilizations as catalysts, magnets, and as dopants for ceramic materials. Rare earth minerals are scarce therefore the unconventional REE-containing resources such as waste materials and industrial byproducts are continuously being investigated. Coal combustion products comprise REE concentrations varying between 200 ppm and 1500 ppm. This quantity can be isolated though the extraction procedure. In this study, the five stages extraction was conducted on the coal combustion ash from the selected landfill site. The extractions of 32 elements (As, Ga, Ce, Be, Ge, Nd, Cr, Zr, Eu, Cu, Nb, Gd, Co, Mo, Dy, Li, Ag, W, Mn, Cd, Au, Ni, In, Hg, Pb, Sn, Ti, V, Sb, Th, Zn, and La) were conveyed. Chemical analyses were conducted via XRF, ICP-OES, ICP-MS, and MS techniques. The complexity of the obtained data was examined by Principal component analysis and Cluster analysis in order to derive interconnections between quantity of elements and landfill characteristics, as well as mutual relationships among the elements of interest, and to assess the accomplishment of REE recovery from the coal ash.
PB  - Međunarodni Institut za nauku o sinterovanju, Beograd
T2  - Science of Sintering
T1  - Assessment of Efficiency of Rare Earth Elements Recovery from Lignite Coal Combustion Ash via Five-Stage Extraction
EP  - 185
IS  - 2
SP  - 169
VL  - 53
DO  - 10.2298/SOS2102169M
ER  - 

@article{
author = "Miličić, Ljiljana and Terzić, Anja and Pezo, Lato and Mijatović, Nevenka and Brceski, Ilija and Vukelić, Nikola",
year = "2021",
abstract = "Rare earth elements (REE) are frequently referred to as ingredients for enhancements in modem industry, as they are extensively applied in many industrial branches due to their accented electro-magnetic and optical properties. REE have end-utilizations as catalysts, magnets, and as dopants for ceramic materials. Rare earth minerals are scarce therefore the unconventional REE-containing resources such as waste materials and industrial byproducts are continuously being investigated. Coal combustion products comprise REE concentrations varying between 200 ppm and 1500 ppm. This quantity can be isolated though the extraction procedure. In this study, the five stages extraction was conducted on the coal combustion ash from the selected landfill site. The extractions of 32 elements (As, Ga, Ce, Be, Ge, Nd, Cr, Zr, Eu, Cu, Nb, Gd, Co, Mo, Dy, Li, Ag, W, Mn, Cd, Au, Ni, In, Hg, Pb, Sn, Ti, V, Sb, Th, Zn, and La) were conveyed. Chemical analyses were conducted via XRF, ICP-OES, ICP-MS, and MS techniques. The complexity of the obtained data was examined by Principal component analysis and Cluster analysis in order to derive interconnections between quantity of elements and landfill characteristics, as well as mutual relationships among the elements of interest, and to assess the accomplishment of REE recovery from the coal ash.",
publisher = "Međunarodni Institut za nauku o sinterovanju, Beograd",
journal = "Science of Sintering",
title = "Assessment of Efficiency of Rare Earth Elements Recovery from Lignite Coal Combustion Ash via Five-Stage Extraction",
pages = "185-169",
number = "2",
volume = "53",
doi = "10.2298/SOS2102169M"
}

Miličić, L., Terzić, A., Pezo, L., Mijatović, N., Brceski, I.,& Vukelić, N.. (2021). Assessment of Efficiency of Rare Earth Elements Recovery from Lignite Coal Combustion Ash via Five-Stage Extraction. in Science of Sintering
Međunarodni Institut za nauku o sinterovanju, Beograd., 53(2), 169-185.
https://doi.org/10.2298/SOS2102169M

Miličić L, Terzić A, Pezo L, Mijatović N, Brceski I, Vukelić N. Assessment of Efficiency of Rare Earth Elements Recovery from Lignite Coal Combustion Ash via Five-Stage Extraction. in Science of Sintering. 2021;53(2):169-185.
doi:10.2298/SOS2102169M .

Miličić, Ljiljana, Terzić, Anja, Pezo, Lato, Mijatović, Nevenka, Brceski, Ilija, Vukelić, Nikola, "Assessment of Efficiency of Rare Earth Elements Recovery from Lignite Coal Combustion Ash via Five-Stage Extraction" in Science of Sintering, 53, no. 2 (2021):169-185,
https://doi.org/10.2298/SOS2102169M . .

TY  - JOUR
AU  - Pezo, Lato
AU  - Pezo, Milada
AU  - Terzić, Anja
AU  - Jovanović, Aca P.
AU  - Lončar, Biljana
AU  - Govedarica, Dragan
AU  - Kojić, Predrag
PY  - 2021
UR  - http://rims.institutims.rs/handle/123456789/408
AB  - The numerical model of the granular flow within an aggregate mixture, conducted in the vertical static and/or the conveyor blender, was explored using the discrete element method (DEM) approach. The blending quality of limestone fine aggregate fractions binary mixture for application in self-compacting concrete was studied. The potential of augmenting the conveyor mixer working efficiency by joining its operation to a Komax-type vertical static mixer, to increase the blending conduct was investigated. In addition the impact of the feed height on the flow field in the cone-shaped conveyor mixer was examined using the DEM simulation. Applying the numerical approach enabled a deeper insight into the quality of blending actions, while the relative standard deviation criteria ranked the uniformity of the mixture. The primary objective of this investigation was to examine the behavior of mixture for two types of blenders and to estimate the combined blending action of these two mixers, to explore the potential to augment the homogeneity of the aggregate fractions binary mixture, i.e., mixing quality, reduce the blending time and to abbreviate the energy-consuming.
PB  - MDPI, Basel
T2  - Processes
T1  - Experimental and Discrete Element Model Investigation of Limestone Aggregate Blending Process in Vertical Static and/or Conveyor Mixer for Application in the Concrete Mixture
IS  - 11
VL  - 9
DO  - 10.3390/pr9111991
ER  - 

@article{
author = "Pezo, Lato and Pezo, Milada and Terzić, Anja and Jovanović, Aca P. and Lončar, Biljana and Govedarica, Dragan and Kojić, Predrag",
year = "2021",
abstract = "The numerical model of the granular flow within an aggregate mixture, conducted in the vertical static and/or the conveyor blender, was explored using the discrete element method (DEM) approach. The blending quality of limestone fine aggregate fractions binary mixture for application in self-compacting concrete was studied. The potential of augmenting the conveyor mixer working efficiency by joining its operation to a Komax-type vertical static mixer, to increase the blending conduct was investigated. In addition the impact of the feed height on the flow field in the cone-shaped conveyor mixer was examined using the DEM simulation. Applying the numerical approach enabled a deeper insight into the quality of blending actions, while the relative standard deviation criteria ranked the uniformity of the mixture. The primary objective of this investigation was to examine the behavior of mixture for two types of blenders and to estimate the combined blending action of these two mixers, to explore the potential to augment the homogeneity of the aggregate fractions binary mixture, i.e., mixing quality, reduce the blending time and to abbreviate the energy-consuming.",
publisher = "MDPI, Basel",
journal = "Processes",
title = "Experimental and Discrete Element Model Investigation of Limestone Aggregate Blending Process in Vertical Static and/or Conveyor Mixer for Application in the Concrete Mixture",
number = "11",
volume = "9",
doi = "10.3390/pr9111991"
}

Pezo, L., Pezo, M., Terzić, A., Jovanović, A. P., Lončar, B., Govedarica, D.,& Kojić, P.. (2021). Experimental and Discrete Element Model Investigation of Limestone Aggregate Blending Process in Vertical Static and/or Conveyor Mixer for Application in the Concrete Mixture. in Processes
MDPI, Basel., 9(11).
https://doi.org/10.3390/pr9111991

Pezo L, Pezo M, Terzić A, Jovanović AP, Lončar B, Govedarica D, Kojić P. Experimental and Discrete Element Model Investigation of Limestone Aggregate Blending Process in Vertical Static and/or Conveyor Mixer for Application in the Concrete Mixture. in Processes. 2021;9(11).
doi:10.3390/pr9111991 .

Pezo, Lato, Pezo, Milada, Terzić, Anja, Jovanović, Aca P., Lončar, Biljana, Govedarica, Dragan, Kojić, Predrag, "Experimental and Discrete Element Model Investigation of Limestone Aggregate Blending Process in Vertical Static and/or Conveyor Mixer for Application in the Concrete Mixture" in Processes, 9, no. 11 (2021),
https://doi.org/10.3390/pr9111991 . .