Radonjanin, Vlastimir

Link to this page

Authority KeyName Variants
orcid::0000-0002-3081-1766
  • Radonjanin, Vlastimir (5)
Projects

Author's Bibliography

Fire protection of health facilities

Ilić, Snežana; Radonjanin, Vlastimir; Laban, Mirjana; Bukvić, Olivera

(2021)

TY  - CONF
AU  - Ilić, Snežana
AU  - Radonjanin, Vlastimir
AU  - Laban, Mirjana
AU  - Bukvić, Olivera
PY  - 2021
UR  - http://rims.institutims.rs/handle/123456789/440
AB  - Critical infrastructure can be demaged, destroyed or disrupted by deliberate acts of natural disasters,negligence, terrorism, sccidents or computer hacking, criminal activity and malicious behaviour. When it comes to the protection of critical infrastructure, one of the most important branches which requires protection is the health system.
In the Republic of Serbia, there are no specific technical rules that deal with the fire protection for construction of health facilities. The Rulebook on the protection of residential, business and public buildings from fire partly mentions hospital facilities. Due to the lack of domestic laes designers must rely on foreign laws and regulations.
The paper presents active and passive fire protection that needs to be implemented when designing health facilities and an example of laws used in other countries relating to the fire protection of hospitals.
In addition to active and passive protection of medical facilities buildings it is also necessary to continuously educate both staff and patients to prevent panic attacks and mistakes that may occur due to an inadequate response.
C3  - Proceedings of the the 17th International Conference on fire and explosion protection and the 7th International Scientific Conference on safety engineering – fire, environment, work environment, integrated risks, Kladovo
T1  - Fire protection of health facilities
UR  - https://hdl.handle.net/21.15107/rcub_rims_440
ER  - 
@conference{
author = "Ilić, Snežana and Radonjanin, Vlastimir and Laban, Mirjana and Bukvić, Olivera",
year = "2021",
abstract = "Critical infrastructure can be demaged, destroyed or disrupted by deliberate acts of natural disasters,negligence, terrorism, sccidents or computer hacking, criminal activity and malicious behaviour. When it comes to the protection of critical infrastructure, one of the most important branches which requires protection is the health system.
In the Republic of Serbia, there are no specific technical rules that deal with the fire protection for construction of health facilities. The Rulebook on the protection of residential, business and public buildings from fire partly mentions hospital facilities. Due to the lack of domestic laes designers must rely on foreign laws and regulations.
The paper presents active and passive fire protection that needs to be implemented when designing health facilities and an example of laws used in other countries relating to the fire protection of hospitals.
In addition to active and passive protection of medical facilities buildings it is also necessary to continuously educate both staff and patients to prevent panic attacks and mistakes that may occur due to an inadequate response.",
journal = "Proceedings of the the 17th International Conference on fire and explosion protection and the 7th International Scientific Conference on safety engineering – fire, environment, work environment, integrated risks, Kladovo",
title = "Fire protection of health facilities",
url = "https://hdl.handle.net/21.15107/rcub_rims_440"
}
Ilić, S., Radonjanin, V., Laban, M.,& Bukvić, O.. (2021). Fire protection of health facilities. in Proceedings of the the 17th International Conference on fire and explosion protection and the 7th International Scientific Conference on safety engineering – fire, environment, work environment, integrated risks, Kladovo.
https://hdl.handle.net/21.15107/rcub_rims_440
Ilić S, Radonjanin V, Laban M, Bukvić O. Fire protection of health facilities. in Proceedings of the the 17th International Conference on fire and explosion protection and the 7th International Scientific Conference on safety engineering – fire, environment, work environment, integrated risks, Kladovo. 2021;.
https://hdl.handle.net/21.15107/rcub_rims_440 .
Ilić, Snežana, Radonjanin, Vlastimir, Laban, Mirjana, Bukvić, Olivera, "Fire protection of health facilities" in Proceedings of the the 17th International Conference on fire and explosion protection and the 7th International Scientific Conference on safety engineering – fire, environment, work environment, integrated risks, Kladovo (2021),
https://hdl.handle.net/21.15107/rcub_rims_440 .

Compressive Strength Improvements of Cement-Based Composites Achieved with Additional Milling of Metakaolin

Ilić, Biljana; Mitrović, Aleksandra; Radonjanin, Vlastimir; Malešev, Mirjana; Zdujić, Miodrag

(Springer, Dordrecht, 2018)

TY  - CONF
AU  - Ilić, Biljana
AU  - Mitrović, Aleksandra
AU  - Radonjanin, Vlastimir
AU  - Malešev, Mirjana
AU  - Zdujić, Miodrag
PY  - 2018
UR  - http://rims.institutims.rs/handle/123456789/350
AB  - Kaolin from a Serbian deposit, having a high content of mica and quartz, disordered kaolinite and a high specific surface area, was used to prepare metakaolin (MK). The calcination at temperatures of 700 degrees C or 750 degrees C for 30 to 180 min resulted in MK having high pozzolanic activity, but also significant aglomeration of particles. In order to disperse aglomerates, MK was milled, which resulted in increased pozzolanic activity and reduced particle size. The effects of MK and additionally milled metakaolin (MKmill) on the composite strengths and microstructure of the pastes were compared. We prepared and investigated composites in which ordinary Portland cement (OPC) was replaced with 10% to 50% of MK or MKmill, as well as the representative samples of paste for determination of microstructure. Compressive strengths higher than the control were obtained for composites having up to 30% of MK and up to 40% of MKmill, respectively. Increase of composite strengths with MKmill was more pronounced at lower cement replacement levels (10% and 20%). Compressive strength of composites containing agglomerated MK were satisfactory, which suggests that milling of MK, as well as purification of kaolin, may not be necessary.
PB  - Springer, Dordrecht
C3  - Calcined Clays for Sustainable Concrete
T1  - Compressive Strength Improvements of Cement-Based Composites Achieved with Additional Milling of Metakaolin
EP  - 218
SP  - 212
VL  - 16
DO  - 10.1007/978-94-024-1207-9_34
ER  - 
@conference{
author = "Ilić, Biljana and Mitrović, Aleksandra and Radonjanin, Vlastimir and Malešev, Mirjana and Zdujić, Miodrag",
year = "2018",
abstract = "Kaolin from a Serbian deposit, having a high content of mica and quartz, disordered kaolinite and a high specific surface area, was used to prepare metakaolin (MK). The calcination at temperatures of 700 degrees C or 750 degrees C for 30 to 180 min resulted in MK having high pozzolanic activity, but also significant aglomeration of particles. In order to disperse aglomerates, MK was milled, which resulted in increased pozzolanic activity and reduced particle size. The effects of MK and additionally milled metakaolin (MKmill) on the composite strengths and microstructure of the pastes were compared. We prepared and investigated composites in which ordinary Portland cement (OPC) was replaced with 10% to 50% of MK or MKmill, as well as the representative samples of paste for determination of microstructure. Compressive strengths higher than the control were obtained for composites having up to 30% of MK and up to 40% of MKmill, respectively. Increase of composite strengths with MKmill was more pronounced at lower cement replacement levels (10% and 20%). Compressive strength of composites containing agglomerated MK were satisfactory, which suggests that milling of MK, as well as purification of kaolin, may not be necessary.",
publisher = "Springer, Dordrecht",
journal = "Calcined Clays for Sustainable Concrete",
title = "Compressive Strength Improvements of Cement-Based Composites Achieved with Additional Milling of Metakaolin",
pages = "218-212",
volume = "16",
doi = "10.1007/978-94-024-1207-9_34"
}
Ilić, B., Mitrović, A., Radonjanin, V., Malešev, M.,& Zdujić, M.. (2018). Compressive Strength Improvements of Cement-Based Composites Achieved with Additional Milling of Metakaolin. in Calcined Clays for Sustainable Concrete
Springer, Dordrecht., 16, 212-218.
https://doi.org/10.1007/978-94-024-1207-9_34
Ilić B, Mitrović A, Radonjanin V, Malešev M, Zdujić M. Compressive Strength Improvements of Cement-Based Composites Achieved with Additional Milling of Metakaolin. in Calcined Clays for Sustainable Concrete. 2018;16:212-218.
doi:10.1007/978-94-024-1207-9_34 .
Ilić, Biljana, Mitrović, Aleksandra, Radonjanin, Vlastimir, Malešev, Mirjana, Zdujić, Miodrag, "Compressive Strength Improvements of Cement-Based Composites Achieved with Additional Milling of Metakaolin" in Calcined Clays for Sustainable Concrete, 16 (2018):212-218,
https://doi.org/10.1007/978-94-024-1207-9_34 . .
4
1
4

Properties of the Cement-Based Composites with High Content of Metakaolin

Ilić, Biljana; Radonjanin, Vlastimir; Malešev, Mirjana; Zdujić, Miodrag; Mitrović, Aleksandra

(Springer, Dordrecht, 2018)

TY  - CONF
AU  - Ilić, Biljana
AU  - Radonjanin, Vlastimir
AU  - Malešev, Mirjana
AU  - Zdujić, Miodrag
AU  - Mitrović, Aleksandra
PY  - 2018
UR  - http://rims.institutims.rs/handle/123456789/332
AB  - Environmental concerns and sustainable development require increased replacement of cement. Most of previous studies have shown that the compressive strength of cement-based composites is maximized with a 20% content of metakaolin. We investigated composites prepared by replacing ordinary Portland Cement (OPC) with 30 to 50% of metakaolin (MK) and addition of appropriate amount of hydrated lime, which were ordinary cured for 2, 28 or 90 days. Hydration products and microstructure of the pastes were determined by X-ray diffraction (XRD), differential thermal analysis/thermal gravimetry (DTA/TG) and mercury intrusion porosimetry (MIP). MK was produced by calcination of kaolin from a Serbian deposit, which contained a high level of impurities. Replacement of OPC with 30% of MK achieved 28 days compressive strength equivalent to that of the control mix. Higher replacement levels, 40% and 50%, combined with the addition of hydrated lime, achieved satisfactory relative strengths of 94% and 87%, respectively. The positive contribution was particularly pronounced after 90 days for a composite containing 50% of MK. The results clearly showed a possibility of obtaining composites having acceptable compressive strength with reduced cement content in accordance with environmental and sustained development requirements.
PB  - Springer, Dordrecht
C3  - Calcined Clays for Sustainable Concrete
T1  - Properties of the Cement-Based Composites with High Content of Metakaolin
EP  - 225
SP  - 219
VL  - 16
DO  - 10.1007/978-94-024-1207-9_35
ER  - 
@conference{
author = "Ilić, Biljana and Radonjanin, Vlastimir and Malešev, Mirjana and Zdujić, Miodrag and Mitrović, Aleksandra",
year = "2018",
abstract = "Environmental concerns and sustainable development require increased replacement of cement. Most of previous studies have shown that the compressive strength of cement-based composites is maximized with a 20% content of metakaolin. We investigated composites prepared by replacing ordinary Portland Cement (OPC) with 30 to 50% of metakaolin (MK) and addition of appropriate amount of hydrated lime, which were ordinary cured for 2, 28 or 90 days. Hydration products and microstructure of the pastes were determined by X-ray diffraction (XRD), differential thermal analysis/thermal gravimetry (DTA/TG) and mercury intrusion porosimetry (MIP). MK was produced by calcination of kaolin from a Serbian deposit, which contained a high level of impurities. Replacement of OPC with 30% of MK achieved 28 days compressive strength equivalent to that of the control mix. Higher replacement levels, 40% and 50%, combined with the addition of hydrated lime, achieved satisfactory relative strengths of 94% and 87%, respectively. The positive contribution was particularly pronounced after 90 days for a composite containing 50% of MK. The results clearly showed a possibility of obtaining composites having acceptable compressive strength with reduced cement content in accordance with environmental and sustained development requirements.",
publisher = "Springer, Dordrecht",
journal = "Calcined Clays for Sustainable Concrete",
title = "Properties of the Cement-Based Composites with High Content of Metakaolin",
pages = "225-219",
volume = "16",
doi = "10.1007/978-94-024-1207-9_35"
}
Ilić, B., Radonjanin, V., Malešev, M., Zdujić, M.,& Mitrović, A.. (2018). Properties of the Cement-Based Composites with High Content of Metakaolin. in Calcined Clays for Sustainable Concrete
Springer, Dordrecht., 16, 219-225.
https://doi.org/10.1007/978-94-024-1207-9_35
Ilić B, Radonjanin V, Malešev M, Zdujić M, Mitrović A. Properties of the Cement-Based Composites with High Content of Metakaolin. in Calcined Clays for Sustainable Concrete. 2018;16:219-225.
doi:10.1007/978-94-024-1207-9_35 .
Ilić, Biljana, Radonjanin, Vlastimir, Malešev, Mirjana, Zdujić, Miodrag, Mitrović, Aleksandra, "Properties of the Cement-Based Composites with High Content of Metakaolin" in Calcined Clays for Sustainable Concrete, 16 (2018):219-225,
https://doi.org/10.1007/978-94-024-1207-9_35 . .
1
1
1

Study on the addition effect of metakaolin and mechanically activated kaolin on cement strength and microstructure under different curing conditions

Ilić, Biljana; Radonjanin, Vlastimir; Malešev, Mirjana; Zdujić, Miodrag; Mitrović, Aleksandra

(Elsevier Sci Ltd, Oxford, 2017)

TY  - JOUR
AU  - Ilić, Biljana
AU  - Radonjanin, Vlastimir
AU  - Malešev, Mirjana
AU  - Zdujić, Miodrag
AU  - Mitrović, Aleksandra
PY  - 2017
UR  - http://rims.institutims.rs/handle/123456789/312
AB  - The effects of thermally (MK) or mechanically activated kaolin (AK) on the compressive strength of mortars and microstructure of pastes were investigated. Mortar mixtures, in which 10%, 20% and 30% of ordinary Portland cement (OPC) was replaced by either MK or AK, were prepared (w/b of 0.5) and ordinary (age 2, 28 or 90 days) and autoclave cured. Hydration products were determined by X-ray diffraction (XRD) and differential thermal analysis/thermal gravimetry (DTA/TG) analysis, while microstructure was investigated by mercury intrusion porosimetry (MIP). MK substitution increases the compressive strength of ordinary-cured mortars, as a result of the higher content of reactive silica that caused more pronounced pozzolanic reaction, as well as by effective refinement of their pore structure. Positive effects on the compressive strength could be achieved up to 30% substitution of OPC by MK The OPC substitution by AK resulted in lower strengths of ordinary-cured mortars, compared to both MK mortars and reference. Higher specific surface area and finer particles of AK were insufficient to compensate, through filler effect, lower pozzolanic reaction and additional negative influence of the kaolinite presence. The highest compressive strength was obtained for mortar with 10% of AK (relative strength of 94%). In comparison to the reference, autoclaved MK and AK mortars, exhibited lower compressive strength, as a consequence of increasing the hydrogarnet formation, instead of tobermorite. The highest strength was achieved for mortar with 10% of AK.
PB  - Elsevier Sci Ltd, Oxford
T2  - Construction and Building Materials
T1  - Study on the addition effect of metakaolin and mechanically activated kaolin on cement strength and microstructure under different curing conditions
EP  - 252
SP  - 243
VL  - 133
DO  - 10.1016/j.conbuildmat.2016.12.068
ER  - 
@article{
author = "Ilić, Biljana and Radonjanin, Vlastimir and Malešev, Mirjana and Zdujić, Miodrag and Mitrović, Aleksandra",
year = "2017",
abstract = "The effects of thermally (MK) or mechanically activated kaolin (AK) on the compressive strength of mortars and microstructure of pastes were investigated. Mortar mixtures, in which 10%, 20% and 30% of ordinary Portland cement (OPC) was replaced by either MK or AK, were prepared (w/b of 0.5) and ordinary (age 2, 28 or 90 days) and autoclave cured. Hydration products were determined by X-ray diffraction (XRD) and differential thermal analysis/thermal gravimetry (DTA/TG) analysis, while microstructure was investigated by mercury intrusion porosimetry (MIP). MK substitution increases the compressive strength of ordinary-cured mortars, as a result of the higher content of reactive silica that caused more pronounced pozzolanic reaction, as well as by effective refinement of their pore structure. Positive effects on the compressive strength could be achieved up to 30% substitution of OPC by MK The OPC substitution by AK resulted in lower strengths of ordinary-cured mortars, compared to both MK mortars and reference. Higher specific surface area and finer particles of AK were insufficient to compensate, through filler effect, lower pozzolanic reaction and additional negative influence of the kaolinite presence. The highest compressive strength was obtained for mortar with 10% of AK (relative strength of 94%). In comparison to the reference, autoclaved MK and AK mortars, exhibited lower compressive strength, as a consequence of increasing the hydrogarnet formation, instead of tobermorite. The highest strength was achieved for mortar with 10% of AK.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Construction and Building Materials",
title = "Study on the addition effect of metakaolin and mechanically activated kaolin on cement strength and microstructure under different curing conditions",
pages = "252-243",
volume = "133",
doi = "10.1016/j.conbuildmat.2016.12.068"
}
Ilić, B., Radonjanin, V., Malešev, M., Zdujić, M.,& Mitrović, A.. (2017). Study on the addition effect of metakaolin and mechanically activated kaolin on cement strength and microstructure under different curing conditions. in Construction and Building Materials
Elsevier Sci Ltd, Oxford., 133, 243-252.
https://doi.org/10.1016/j.conbuildmat.2016.12.068
Ilić B, Radonjanin V, Malešev M, Zdujić M, Mitrović A. Study on the addition effect of metakaolin and mechanically activated kaolin on cement strength and microstructure under different curing conditions. in Construction and Building Materials. 2017;133:243-252.
doi:10.1016/j.conbuildmat.2016.12.068 .
Ilić, Biljana, Radonjanin, Vlastimir, Malešev, Mirjana, Zdujić, Miodrag, Mitrović, Aleksandra, "Study on the addition effect of metakaolin and mechanically activated kaolin on cement strength and microstructure under different curing conditions" in Construction and Building Materials, 133 (2017):243-252,
https://doi.org/10.1016/j.conbuildmat.2016.12.068 . .
43
22
42

Effects of mechanical and thermal activation on pozzolanic activity of kaolin containing mica

Ilić, Biljana; Radonjanin, Vlastimir; Malešev, Mirjana; Zdujić, Miodrag; Mitrović, Aleksandra

(Elsevier Science Bv, Amsterdam, 2016)

TY  - JOUR
AU  - Ilić, Biljana
AU  - Radonjanin, Vlastimir
AU  - Malešev, Mirjana
AU  - Zdujić, Miodrag
AU  - Mitrović, Aleksandra
PY  - 2016
UR  - http://rims.institutims.rs/handle/123456789/297
AB  - Kaolin from a Serbian deposit, characterized by high content of impurities, such as mica and quartz, disordered kaolinite and high specific surface area, was subjected to thermal and mechanical activation on a large scale. Activations were carried out with a goal to investigate the effects of applied methods on the chemical, structural and morphological changes that occurred in the kaolin, and their influence on the pozzolanic activity. The changes were monitored using XRD, FTIR, TG/DTA, PSD, BET and SEM analyses. Pozzolanic activity was evaluated by determination of the 7-day compressive strength conducted on the lime mortars. The results showed that mechanical activation by milling the kaolin for 20 h in the conventional horizontal ball mill was competitive for obtaining pozzolana as thermal activation. Pozzolanic activity of thermally activated kaolin was mainly influenced by formation of metakaolin. Combined effects (such as significant specific surface area increase, as well as partial kaolinite and complete mica phase amorphization) were dominant in pozzolanic activity of mechanically activated kaolin.
PB  - Elsevier Science Bv, Amsterdam
T2  - Applied Clay Science
T1  - Effects of mechanical and thermal activation on pozzolanic activity of kaolin containing mica
EP  - 181
SP  - 173
VL  - 123
DO  - 10.1016/j.clay.2016.01.029
ER  - 
@article{
author = "Ilić, Biljana and Radonjanin, Vlastimir and Malešev, Mirjana and Zdujić, Miodrag and Mitrović, Aleksandra",
year = "2016",
abstract = "Kaolin from a Serbian deposit, characterized by high content of impurities, such as mica and quartz, disordered kaolinite and high specific surface area, was subjected to thermal and mechanical activation on a large scale. Activations were carried out with a goal to investigate the effects of applied methods on the chemical, structural and morphological changes that occurred in the kaolin, and their influence on the pozzolanic activity. The changes were monitored using XRD, FTIR, TG/DTA, PSD, BET and SEM analyses. Pozzolanic activity was evaluated by determination of the 7-day compressive strength conducted on the lime mortars. The results showed that mechanical activation by milling the kaolin for 20 h in the conventional horizontal ball mill was competitive for obtaining pozzolana as thermal activation. Pozzolanic activity of thermally activated kaolin was mainly influenced by formation of metakaolin. Combined effects (such as significant specific surface area increase, as well as partial kaolinite and complete mica phase amorphization) were dominant in pozzolanic activity of mechanically activated kaolin.",
publisher = "Elsevier Science Bv, Amsterdam",
journal = "Applied Clay Science",
title = "Effects of mechanical and thermal activation on pozzolanic activity of kaolin containing mica",
pages = "181-173",
volume = "123",
doi = "10.1016/j.clay.2016.01.029"
}
Ilić, B., Radonjanin, V., Malešev, M., Zdujić, M.,& Mitrović, A.. (2016). Effects of mechanical and thermal activation on pozzolanic activity of kaolin containing mica. in Applied Clay Science
Elsevier Science Bv, Amsterdam., 123, 173-181.
https://doi.org/10.1016/j.clay.2016.01.029
Ilić B, Radonjanin V, Malešev M, Zdujić M, Mitrović A. Effects of mechanical and thermal activation on pozzolanic activity of kaolin containing mica. in Applied Clay Science. 2016;123:173-181.
doi:10.1016/j.clay.2016.01.029 .
Ilić, Biljana, Radonjanin, Vlastimir, Malešev, Mirjana, Zdujić, Miodrag, Mitrović, Aleksandra, "Effects of mechanical and thermal activation on pozzolanic activity of kaolin containing mica" in Applied Clay Science, 123 (2016):173-181,
https://doi.org/10.1016/j.clay.2016.01.029 . .
104
60
104