TY  - JOUR
AU  - Stojanović, Marko
AU  - Šupić, Slobodan
AU  - Janković, Ksenija
AU  - Bojović, Dragan
AU  - Terzić, Anja
AU  - Malešev, Mirjana
PY  - 2024
UR  - http://rims.institutims.rs/handle/123456789/889
AB  - Quantity of waste rubber generated by automobile tires is growing, posing an environmental threat. Rubber tire recycling was studied for usage in asphalt and waterproofing systems during past few decades. Globally, concrete is the most widely used building material. About 7% of CO2 emissions come from the cement production. The purpose of this research is to assess if using waste rubber and Portland cement together in composite material for structural applications is feasible. Waste tires (shredded to 0/1 mm) were used as fine aggregate replacement (in 2.5 and 7.5 %), together with PC and natural stone. An investigation of properties in fresh (slump test, bulk density, air content) and hardened state (bulk density, compressive strength) was performed on the rubberized concrete. The compressive strength decreased by increasing the rubber content for all w/c ratios (0.55-0.4). The addition of fine-sized rubber did not cause a retardation in cement hydration mechanism. According to the obtained compressive strengths, all designed rubberized concretes belong to a group of structural concretes.
PB  - Association for ETRAN Society
T2  - Science of Sintering Science of Sintering OnLine-First Issue
T1  - Investigation of the Mechanical Properties of Concrete Incorporating Recycled Rubber Particles
VL  - 0
DO  - 10.2298/SOS240523027S
ER  - 

@article{
author = "Stojanović, Marko and Šupić, Slobodan and Janković, Ksenija and Bojović, Dragan and Terzić, Anja and Malešev, Mirjana",
year = "2024",
abstract = "Quantity of waste rubber generated by automobile tires is growing, posing an environmental threat. Rubber tire recycling was studied for usage in asphalt and waterproofing systems during past few decades. Globally, concrete is the most widely used building material. About 7% of CO2 emissions come from the cement production. The purpose of this research is to assess if using waste rubber and Portland cement together in composite material for structural applications is feasible. Waste tires (shredded to 0/1 mm) were used as fine aggregate replacement (in 2.5 and 7.5 %), together with PC and natural stone. An investigation of properties in fresh (slump test, bulk density, air content) and hardened state (bulk density, compressive strength) was performed on the rubberized concrete. The compressive strength decreased by increasing the rubber content for all w/c ratios (0.55-0.4). The addition of fine-sized rubber did not cause a retardation in cement hydration mechanism. According to the obtained compressive strengths, all designed rubberized concretes belong to a group of structural concretes.",
publisher = "Association for ETRAN Society",
journal = "Science of Sintering Science of Sintering OnLine-First Issue",
title = "Investigation of the Mechanical Properties of Concrete Incorporating Recycled Rubber Particles",
volume = "0",
doi = "10.2298/SOS240523027S"
}

Stojanović, M., Šupić, S., Janković, K., Bojović, D., Terzić, A.,& Malešev, M.. (2024). Investigation of the Mechanical Properties of Concrete Incorporating Recycled Rubber Particles. in Science of Sintering Science of Sintering OnLine-First Issue
Association for ETRAN Society., 0.
https://doi.org/10.2298/SOS240523027S

Stojanović M, Šupić S, Janković K, Bojović D, Terzić A, Malešev M. Investigation of the Mechanical Properties of Concrete Incorporating Recycled Rubber Particles. in Science of Sintering Science of Sintering OnLine-First Issue. 2024;0.
doi:10.2298/SOS240523027S .

Stojanović, Marko, Šupić, Slobodan, Janković, Ksenija, Bojović, Dragan, Terzić, Anja, Malešev, Mirjana, "Investigation of the Mechanical Properties of Concrete Incorporating Recycled Rubber Particles" in Science of Sintering Science of Sintering OnLine-First Issue, 0 (2024),
https://doi.org/10.2298/SOS240523027S . .

TY  - CONF
AU  - Ilić, Snežana
AU  - Malešev, Mirjana
AU  - Mirković-Marjanović, Milica
AU  - Kijanović, Aleksandar
PY  - 2022
UR  - http://rims.institutims.rs/handle/123456789/438
AB  - In this paper the experimental procedure for the determination of ventilation heat losses across building envelopes has been shown. The alternative name for this method is Blower Door Test or Fan Pressurization method. This text is a user manual for the determination of ventilation heat losses and parameters which is used to describe the air permeability of buildings. The experiment examination was performed at the office with old and after with new windows. The results were compared, and a significant contribution of new windows was shown.
PB  - University of Banja Luka Faculty of Architecture, Civil Engineering and Geodesy
C3  - Proceedings of International conference on contemporary theory and practice in construction XV, STEPGRAD 2022
T1  - Determination of ventilation heat losses through building envelope – a case study
EP  - 558
SP  - 552
UR  - https://hdl.handle.net/21.15107/rcub_rims_438
ER  - 

@conference{
author = "Ilić, Snežana and Malešev, Mirjana and Mirković-Marjanović, Milica and Kijanović, Aleksandar",
year = "2022",
abstract = "In this paper the experimental procedure for the determination of ventilation heat losses across building envelopes has been shown. The alternative name for this method is Blower Door Test or Fan Pressurization method. This text is a user manual for the determination of ventilation heat losses and parameters which is used to describe the air permeability of buildings. The experiment examination was performed at the office with old and after with new windows. The results were compared, and a significant contribution of new windows was shown.",
publisher = "University of Banja Luka Faculty of Architecture, Civil Engineering and Geodesy",
journal = "Proceedings of International conference on contemporary theory and practice in construction XV, STEPGRAD 2022",
title = "Determination of ventilation heat losses through building envelope – a case study",
pages = "558-552",
url = "https://hdl.handle.net/21.15107/rcub_rims_438"
}

Ilić, S., Malešev, M., Mirković-Marjanović, M.,& Kijanović, A.. (2022). Determination of ventilation heat losses through building envelope – a case study. in Proceedings of International conference on contemporary theory and practice in construction XV, STEPGRAD 2022
University of Banja Luka Faculty of Architecture, Civil Engineering and Geodesy., 552-558.
https://hdl.handle.net/21.15107/rcub_rims_438

Ilić S, Malešev M, Mirković-Marjanović M, Kijanović A. Determination of ventilation heat losses through building envelope – a case study. in Proceedings of International conference on contemporary theory and practice in construction XV, STEPGRAD 2022. 2022;:552-558.
https://hdl.handle.net/21.15107/rcub_rims_438 .

Ilić, Snežana, Malešev, Mirjana, Mirković-Marjanović, Milica, Kijanović, Aleksandar, "Determination of ventilation heat losses through building envelope – a case study" in Proceedings of International conference on contemporary theory and practice in construction XV, STEPGRAD 2022 (2022):552-558,
https://hdl.handle.net/21.15107/rcub_rims_438 .

TY  - CONF
AU  - Ilić, Biljana
AU  - Radonjanin, Vlastimir
AU  - Malešev, Mirjana
AU  - Laban, Mirjana
PY  - 2021
UR  - http://rims.institutims.rs/handle/123456789/904
PB  - Departman za građevinarstvo i geodeziju, Fakultet tehničkih nauka, Novi Sad
C3  - 15th International Scientific Conference Planning, Design, Construction and Building  Renewal (iNDIS), Novi Sad, Serbia
T1  - Challenges in standardization of 3D printed concrete
EP  - 144
SP  - 137
ER  - 

@conference{
author = "Ilić, Biljana and Radonjanin, Vlastimir and Malešev, Mirjana and Laban, Mirjana",
year = "2021",
publisher = "Departman za građevinarstvo i geodeziju, Fakultet tehničkih nauka, Novi Sad",
journal = "15th International Scientific Conference Planning, Design, Construction and Building  Renewal (iNDIS), Novi Sad, Serbia",
title = "Challenges in standardization of 3D printed concrete",
pages = "144-137"
}

Ilić, B., Radonjanin, V., Malešev, M.,& Laban, M.. (2021). Challenges in standardization of 3D printed concrete. in 15th International Scientific Conference Planning, Design, Construction and Building  Renewal (iNDIS), Novi Sad, Serbia
Departman za građevinarstvo i geodeziju, Fakultet tehničkih nauka, Novi Sad., 137-144.

Ilić B, Radonjanin V, Malešev M, Laban M. Challenges in standardization of 3D printed concrete. in 15th International Scientific Conference Planning, Design, Construction and Building  Renewal (iNDIS), Novi Sad, Serbia. 2021;:137-144..

Ilić, Biljana, Radonjanin, Vlastimir, Malešev, Mirjana, Laban, Mirjana, "Challenges in standardization of 3D printed concrete" in 15th International Scientific Conference Planning, Design, Construction and Building  Renewal (iNDIS), Novi Sad, Serbia (2021):137-144.