Ilić, Biljana

Link to this page

Authority KeyName Variants
orcid::0000-0003-0798-1748
  • Ilić, Biljana (24)
  • Terzić, Anja (1)
Projects

Author's Bibliography

X-ray fluorescence spectroscopy of eggshells as a potential raw material in the construction industry

Mijatović, Nevenka; Terzić, Anja; Miličić, Ljiljana

(2023)

TY  - CONF
AU  - Mijatović, Nevenka
AU  - Terzić, Anja
AU  - Miličić, Ljiljana
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/97
AB  - Due to its chemical composition based on CaCO3 and low price, eggshells, as waste from one of the most widely consumed foods worldwide, are receiving increased attention in building and construction industry studies. The goal of this study was to see if the chemical composition of eggshells could be utilized to distinguish eggs from different production systems. In Serbia, eggs were taken at random from ten commercial cages and ten commercial free-range flocks. Using energy dispersive X-ray fluorescence spectroscopy (EDXRF) and a chemometrics approach, twenty eggshell samples from each flock were tested for element composition (Ca, P, Mg, Na, Al, Cu, Mn, Fe, K, S, and Zn). Analysis showed that free-range eggshells had higher levels of macrominerals (P, Mg, and Na) but lower levels of microminerals (Cu, Fe, K, S, and Mn) than caged eggshells (P<0.05). A large degree of variability within and between production systems was observed for all tested elements. The findings suggest that EDXRF and chemometric analysis of eggshell elemental profiles could provide a useful and effective tool for distinguishing between free-range and caged eggs.
C3  - Serbian Ceramic Society Conference “Advanced Ceramic and Application XI – New frontiers in multifunctional material science and processing”, Book of Abstracts
T1  - X-ray fluorescence spectroscopy of eggshells as a potential raw material in the construction industry
EP  - 83
SP  - 82
UR  - https://hdl.handle.net/21.15107/rcub_rims_97
ER  - 
@conference{
author = "Mijatović, Nevenka and Terzić, Anja and Miličić, Ljiljana",
year = "2023",
abstract = "Due to its chemical composition based on CaCO3 and low price, eggshells, as waste from one of the most widely consumed foods worldwide, are receiving increased attention in building and construction industry studies. The goal of this study was to see if the chemical composition of eggshells could be utilized to distinguish eggs from different production systems. In Serbia, eggs were taken at random from ten commercial cages and ten commercial free-range flocks. Using energy dispersive X-ray fluorescence spectroscopy (EDXRF) and a chemometrics approach, twenty eggshell samples from each flock were tested for element composition (Ca, P, Mg, Na, Al, Cu, Mn, Fe, K, S, and Zn). Analysis showed that free-range eggshells had higher levels of macrominerals (P, Mg, and Na) but lower levels of microminerals (Cu, Fe, K, S, and Mn) than caged eggshells (P<0.05). A large degree of variability within and between production systems was observed for all tested elements. The findings suggest that EDXRF and chemometric analysis of eggshell elemental profiles could provide a useful and effective tool for distinguishing between free-range and caged eggs.",
journal = "Serbian Ceramic Society Conference “Advanced Ceramic and Application XI – New frontiers in multifunctional material science and processing”, Book of Abstracts",
title = "X-ray fluorescence spectroscopy of eggshells as a potential raw material in the construction industry",
pages = "83-82",
url = "https://hdl.handle.net/21.15107/rcub_rims_97"
}
Mijatović, N., Terzić, A.,& Miličić, L.. (2023). X-ray fluorescence spectroscopy of eggshells as a potential raw material in the construction industry. in Serbian Ceramic Society Conference “Advanced Ceramic and Application XI – New frontiers in multifunctional material science and processing”, Book of Abstracts, 82-83.
https://hdl.handle.net/21.15107/rcub_rims_97
Mijatović N, Terzić A, Miličić L. X-ray fluorescence spectroscopy of eggshells as a potential raw material in the construction industry. in Serbian Ceramic Society Conference “Advanced Ceramic and Application XI – New frontiers in multifunctional material science and processing”, Book of Abstracts. 2023;:82-83.
https://hdl.handle.net/21.15107/rcub_rims_97 .
Mijatović, Nevenka, Terzić, Anja, Miličić, Ljiljana, "X-ray fluorescence spectroscopy of eggshells as a potential raw material in the construction industry" in Serbian Ceramic Society Conference “Advanced Ceramic and Application XI – New frontiers in multifunctional material science and processing”, Book of Abstracts (2023):82-83,
https://hdl.handle.net/21.15107/rcub_rims_97 .

Ocenjivanje i verfikacija stalnosti performansi betona u skladu sa zahtevima Pravilnika za beton

Ilić, Biljana; Bojović, Dragan

(2023)

TY  - CONF
AU  - Ilić, Biljana
AU  - Bojović, Dragan
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/565
C3  - NOVI PRISTUP OCENJIVANJU I VERIFIKACIJI STALNOSTI PERFORMANSI BETONA, Beograd-Zbornik radova
T1  - Ocenjivanje i verfikacija stalnosti performansi betona u skladu sa zahtevima Pravilnika za beton
EP  - 54
SP  - 49
UR  - https://hdl.handle.net/21.15107/rcub_rims_565
ER  - 
@conference{
author = "Ilić, Biljana and Bojović, Dragan",
year = "2023",
journal = "NOVI PRISTUP OCENJIVANJU I VERIFIKACIJI STALNOSTI PERFORMANSI BETONA, Beograd-Zbornik radova",
title = "Ocenjivanje i verfikacija stalnosti performansi betona u skladu sa zahtevima Pravilnika za beton",
pages = "54-49",
url = "https://hdl.handle.net/21.15107/rcub_rims_565"
}
Ilić, B.,& Bojović, D.. (2023). Ocenjivanje i verfikacija stalnosti performansi betona u skladu sa zahtevima Pravilnika za beton. in NOVI PRISTUP OCENJIVANJU I VERIFIKACIJI STALNOSTI PERFORMANSI BETONA, Beograd-Zbornik radova, 49-54.
https://hdl.handle.net/21.15107/rcub_rims_565
Ilić B, Bojović D. Ocenjivanje i verfikacija stalnosti performansi betona u skladu sa zahtevima Pravilnika za beton. in NOVI PRISTUP OCENJIVANJU I VERIFIKACIJI STALNOSTI PERFORMANSI BETONA, Beograd-Zbornik radova. 2023;:49-54.
https://hdl.handle.net/21.15107/rcub_rims_565 .
Ilić, Biljana, Bojović, Dragan, "Ocenjivanje i verfikacija stalnosti performansi betona u skladu sa zahtevima Pravilnika za beton" in NOVI PRISTUP OCENJIVANJU I VERIFIKACIJI STALNOSTI PERFORMANSI BETONA, Beograd-Zbornik radova (2023):49-54,
https://hdl.handle.net/21.15107/rcub_rims_565 .

Chemical analysis of historical mortars from the Roman period in Serbia

Mijatović, Nevenka; Miličić, Ljiljana; Delić-Nikolić, Ivana; Nikolić, Emilija; Jovičić, Mladen; Ilić, Biljana

(2022)

TY  - CONF
AU  - Mijatović, Nevenka
AU  - Miličić, Ljiljana
AU  - Delić-Nikolić, Ivana
AU  - Nikolić, Emilija
AU  - Jovičić, Mladen
AU  - Ilić, Biljana
PY  - 2022
UR  - http://rims.institutims.rs/handle/123456789/563
C3  - Serbian Ceramic Society Conference “Advanced Ceramic and Application X– New frontiers in multifunctional material science and processing”, Beograd, Srbija
T1  - Chemical analysis of historical mortars from the Roman period in Serbia
SP  - 67
UR  - https://hdl.handle.net/21.15107/rcub_rims_563
ER  - 
@conference{
author = "Mijatović, Nevenka and Miličić, Ljiljana and Delić-Nikolić, Ivana and Nikolić, Emilija and Jovičić, Mladen and Ilić, Biljana",
year = "2022",
journal = "Serbian Ceramic Society Conference “Advanced Ceramic and Application X– New frontiers in multifunctional material science and processing”, Beograd, Srbija",
title = "Chemical analysis of historical mortars from the Roman period in Serbia",
pages = "67",
url = "https://hdl.handle.net/21.15107/rcub_rims_563"
}
Mijatović, N., Miličić, L., Delić-Nikolić, I., Nikolić, E., Jovičić, M.,& Ilić, B.. (2022). Chemical analysis of historical mortars from the Roman period in Serbia. in Serbian Ceramic Society Conference “Advanced Ceramic and Application X– New frontiers in multifunctional material science and processing”, Beograd, Srbija, 67.
https://hdl.handle.net/21.15107/rcub_rims_563
Mijatović N, Miličić L, Delić-Nikolić I, Nikolić E, Jovičić M, Ilić B. Chemical analysis of historical mortars from the Roman period in Serbia. in Serbian Ceramic Society Conference “Advanced Ceramic and Application X– New frontiers in multifunctional material science and processing”, Beograd, Srbija. 2022;:67.
https://hdl.handle.net/21.15107/rcub_rims_563 .
Mijatović, Nevenka, Miličić, Ljiljana, Delić-Nikolić, Ivana, Nikolić, Emilija, Jovičić, Mladen, Ilić, Biljana, "Chemical analysis of historical mortars from the Roman period in Serbia" in Serbian Ceramic Society Conference “Advanced Ceramic and Application X– New frontiers in multifunctional material science and processing”, Beograd, Srbija (2022):67,
https://hdl.handle.net/21.15107/rcub_rims_563 .

Lime mortars containing clays for the conservation of the Danube Limes

Miličić, Ljiljana; Delić-Nikolić, Ivana; Mijatović, Nevenka; Ilić, Biljana; Nikolić, Emilija; Vučetić, Snežana; Jovičić, Mladen; Ranogajec, Jonjaua

(2022)

TY  - CONF
AU  - Miličić, Ljiljana
AU  - Delić-Nikolić, Ivana
AU  - Mijatović, Nevenka
AU  - Ilić, Biljana
AU  - Nikolić, Emilija
AU  - Vučetić, Snežana
AU  - Jovičić, Mladen
AU  - Ranogajec, Jonjaua
PY  - 2022
UR  - http://rims.institutims.rs/handle/123456789/562
C3  - International Congress Chemistry for Cultural Heritage 6th ChemCH Congress, Ravenna, Italy
T1  - Lime mortars containing clays for the conservation of the Danube Limes
SP  - 128
UR  - https://hdl.handle.net/21.15107/rcub_rims_562
ER  - 
@conference{
author = "Miličić, Ljiljana and Delić-Nikolić, Ivana and Mijatović, Nevenka and Ilić, Biljana and Nikolić, Emilija and Vučetić, Snežana and Jovičić, Mladen and Ranogajec, Jonjaua",
year = "2022",
journal = "International Congress Chemistry for Cultural Heritage 6th ChemCH Congress, Ravenna, Italy",
title = "Lime mortars containing clays for the conservation of the Danube Limes",
pages = "128",
url = "https://hdl.handle.net/21.15107/rcub_rims_562"
}
Miličić, L., Delić-Nikolić, I., Mijatović, N., Ilić, B., Nikolić, E., Vučetić, S., Jovičić, M.,& Ranogajec, J.. (2022). Lime mortars containing clays for the conservation of the Danube Limes. in International Congress Chemistry for Cultural Heritage 6th ChemCH Congress, Ravenna, Italy, 128.
https://hdl.handle.net/21.15107/rcub_rims_562
Miličić L, Delić-Nikolić I, Mijatović N, Ilić B, Nikolić E, Vučetić S, Jovičić M, Ranogajec J. Lime mortars containing clays for the conservation of the Danube Limes. in International Congress Chemistry for Cultural Heritage 6th ChemCH Congress, Ravenna, Italy. 2022;:128.
https://hdl.handle.net/21.15107/rcub_rims_562 .
Miličić, Ljiljana, Delić-Nikolić, Ivana, Mijatović, Nevenka, Ilić, Biljana, Nikolić, Emilija, Vučetić, Snežana, Jovičić, Mladen, Ranogajec, Jonjaua, "Lime mortars containing clays for the conservation of the Danube Limes" in International Congress Chemistry for Cultural Heritage 6th ChemCH Congress, Ravenna, Italy (2022):128,
https://hdl.handle.net/21.15107/rcub_rims_562 .

Energy dispersive X-ray fluorescence in the investigation of the composition of historical mortars

Mijatović, Nevenka; Miličić, Ljiljana; Delić-Nikolić, Ivana; Ilić, Biljana

(2022)

TY  - CONF
AU  - Mijatović, Nevenka
AU  - Miličić, Ljiljana
AU  - Delić-Nikolić, Ivana
AU  - Ilić, Biljana
PY  - 2022
UR  - http://rims.institutims.rs/handle/123456789/561
C3  - 1st International Conference with Workshop, Science for Conservation of the Danube Limes Mortar Design for Conservation – Danube Roman Frontier 2000 Years After, Viminacium, Serbia
T1  - Energy dispersive X-ray fluorescence in the investigation of the composition of historical mortars
EP  - 51
SP  - 49
UR  - https://hdl.handle.net/21.15107/rcub_rims_561
ER  - 
@conference{
author = "Mijatović, Nevenka and Miličić, Ljiljana and Delić-Nikolić, Ivana and Ilić, Biljana",
year = "2022",
journal = "1st International Conference with Workshop, Science for Conservation of the Danube Limes Mortar Design for Conservation – Danube Roman Frontier 2000 Years After, Viminacium, Serbia",
title = "Energy dispersive X-ray fluorescence in the investigation of the composition of historical mortars",
pages = "51-49",
url = "https://hdl.handle.net/21.15107/rcub_rims_561"
}
Mijatović, N., Miličić, L., Delić-Nikolić, I.,& Ilić, B.. (2022). Energy dispersive X-ray fluorescence in the investigation of the composition of historical mortars. in 1st International Conference with Workshop, Science for Conservation of the Danube Limes Mortar Design for Conservation – Danube Roman Frontier 2000 Years After, Viminacium, Serbia, 49-51.
https://hdl.handle.net/21.15107/rcub_rims_561
Mijatović N, Miličić L, Delić-Nikolić I, Ilić B. Energy dispersive X-ray fluorescence in the investigation of the composition of historical mortars. in 1st International Conference with Workshop, Science for Conservation of the Danube Limes Mortar Design for Conservation – Danube Roman Frontier 2000 Years After, Viminacium, Serbia. 2022;:49-51.
https://hdl.handle.net/21.15107/rcub_rims_561 .
Mijatović, Nevenka, Miličić, Ljiljana, Delić-Nikolić, Ivana, Ilić, Biljana, "Energy dispersive X-ray fluorescence in the investigation of the composition of historical mortars" in 1st International Conference with Workshop, Science for Conservation of the Danube Limes Mortar Design for Conservation – Danube Roman Frontier 2000 Years After, Viminacium, Serbia (2022):49-51,
https://hdl.handle.net/21.15107/rcub_rims_561 .

Put do prve srpske tehničke ocene za portland-kompozitni cement sa smanjenim sadržajem klinkera

Ilić, Biljana; Miličić, Ljiljana; Milinković, Dejana; Radojević, Zagorka

(2022)

TY  - CONF
AU  - Ilić, Biljana
AU  - Miličić, Ljiljana
AU  - Milinković, Dejana
AU  - Radojević, Zagorka
PY  - 2022
UR  - http://rims.institutims.rs/handle/123456789/564
C3  - XXVIII kongres DIMK i IX kongres SIGP sa i međunarodnim simpozijumom o istraživanjima i primeni savremenih dostignuća u građevinarstvu u oblasti materijala i konstrukcija, Divčibare, Srbija
T1  - Put do prve srpske tehničke ocene za portland-kompozitni cement sa smanjenim sadržajem klinkera
EP  - 182
SP  - 175
UR  - https://hdl.handle.net/21.15107/rcub_rims_564
ER  - 
@conference{
author = "Ilić, Biljana and Miličić, Ljiljana and Milinković, Dejana and Radojević, Zagorka",
year = "2022",
journal = "XXVIII kongres DIMK i IX kongres SIGP sa i međunarodnim simpozijumom o istraživanjima i primeni savremenih dostignuća u građevinarstvu u oblasti materijala i konstrukcija, Divčibare, Srbija",
title = "Put do prve srpske tehničke ocene za portland-kompozitni cement sa smanjenim sadržajem klinkera",
pages = "182-175",
url = "https://hdl.handle.net/21.15107/rcub_rims_564"
}
Ilić, B., Miličić, L., Milinković, D.,& Radojević, Z.. (2022). Put do prve srpske tehničke ocene za portland-kompozitni cement sa smanjenim sadržajem klinkera. in XXVIII kongres DIMK i IX kongres SIGP sa i međunarodnim simpozijumom o istraživanjima i primeni savremenih dostignuća u građevinarstvu u oblasti materijala i konstrukcija, Divčibare, Srbija, 175-182.
https://hdl.handle.net/21.15107/rcub_rims_564
Ilić B, Miličić L, Milinković D, Radojević Z. Put do prve srpske tehničke ocene za portland-kompozitni cement sa smanjenim sadržajem klinkera. in XXVIII kongres DIMK i IX kongres SIGP sa i međunarodnim simpozijumom o istraživanjima i primeni savremenih dostignuća u građevinarstvu u oblasti materijala i konstrukcija, Divčibare, Srbija. 2022;:175-182.
https://hdl.handle.net/21.15107/rcub_rims_564 .
Ilić, Biljana, Miličić, Ljiljana, Milinković, Dejana, Radojević, Zagorka, "Put do prve srpske tehničke ocene za portland-kompozitni cement sa smanjenim sadržajem klinkera" in XXVIII kongres DIMK i IX kongres SIGP sa i međunarodnim simpozijumom o istraživanjima i primeni savremenih dostignuća u građevinarstvu u oblasti materijala i konstrukcija, Divčibare, Srbija (2022):175-182,
https://hdl.handle.net/21.15107/rcub_rims_564 .

Compressive strength and microstructure of ordinary cured and autoclaved cement-based composites with mechanically activated kaolins

Ilić, Biljana; Mitrović, Aleksandra; Miličić, Ljiljana; Zdujić, Miodrag

(Elsevier Sci Ltd, Oxford, 2018)

TY  - JOUR
AU  - Ilić, Biljana
AU  - Mitrović, Aleksandra
AU  - Miličić, Ljiljana
AU  - Zdujić, Miodrag
PY  - 2018
UR  - http://rims.institutims.rs/handle/123456789/347
AB  - The effects of two different mechanically activated kaolins, AKV (61% kaolinite, 14% quartz and 16% mica) and AKG (51.6% kaolinite and 40.6% quartz) on the compressive strength of cement composites and microstructure of pastes were investigated. Composite mixtures, in which 10, 20, 30, 40 and 50% of ordinary Portland cement (OPC) was replaced by AKV or AKG, were prepared with w/b of 0.5, and exposed to different curing conditions (ordinary curing for 28 days and autoclaving). Factors affecting microstructure were investigated on pastes by X-ray diffraction (XRD), Differential thermal analysis/thermal gravimetry (DTA/TG) analyses. Mercury intrusion porosimetry (MIP) and Scanning electron microscopy with Energy-dispersive spectroscopy (SEM-EDS). AKG composites exhibited higher compressive strengths under both curing conditions. Positive autoclaving effects on strengths were predominantly pronounced at the higher cement replacement levels. Comparison of the autoclaved and ordinary cured paste microstructure, revealed more intensive pozzolanic reaction during autoclaving conditions (CH content near zero) and higher total porosity. The negative effect of hydrogarnet on the strength was compensated by the formation of the crystalline tobermorite. Obtained results revealed that mechanically activated kaolin, with high content of quartz, could be a promising pozzolanic addition, even at high cement replacement levels (30-50%), especially when autoclaving curing conditions were applied.
PB  - Elsevier Sci Ltd, Oxford
T2  - Construction and Building Materials
T1  - Compressive strength and microstructure of ordinary cured and autoclaved cement-based composites with mechanically activated kaolins
EP  - 101
SP  - 92
VL  - 178
DO  - 10.1016/j.conbuildmat.2018.05.144
ER  - 
@article{
author = "Ilić, Biljana and Mitrović, Aleksandra and Miličić, Ljiljana and Zdujić, Miodrag",
year = "2018",
abstract = "The effects of two different mechanically activated kaolins, AKV (61% kaolinite, 14% quartz and 16% mica) and AKG (51.6% kaolinite and 40.6% quartz) on the compressive strength of cement composites and microstructure of pastes were investigated. Composite mixtures, in which 10, 20, 30, 40 and 50% of ordinary Portland cement (OPC) was replaced by AKV or AKG, were prepared with w/b of 0.5, and exposed to different curing conditions (ordinary curing for 28 days and autoclaving). Factors affecting microstructure were investigated on pastes by X-ray diffraction (XRD), Differential thermal analysis/thermal gravimetry (DTA/TG) analyses. Mercury intrusion porosimetry (MIP) and Scanning electron microscopy with Energy-dispersive spectroscopy (SEM-EDS). AKG composites exhibited higher compressive strengths under both curing conditions. Positive autoclaving effects on strengths were predominantly pronounced at the higher cement replacement levels. Comparison of the autoclaved and ordinary cured paste microstructure, revealed more intensive pozzolanic reaction during autoclaving conditions (CH content near zero) and higher total porosity. The negative effect of hydrogarnet on the strength was compensated by the formation of the crystalline tobermorite. Obtained results revealed that mechanically activated kaolin, with high content of quartz, could be a promising pozzolanic addition, even at high cement replacement levels (30-50%), especially when autoclaving curing conditions were applied.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Construction and Building Materials",
title = "Compressive strength and microstructure of ordinary cured and autoclaved cement-based composites with mechanically activated kaolins",
pages = "101-92",
volume = "178",
doi = "10.1016/j.conbuildmat.2018.05.144"
}
Ilić, B., Mitrović, A., Miličić, L.,& Zdujić, M.. (2018). Compressive strength and microstructure of ordinary cured and autoclaved cement-based composites with mechanically activated kaolins. in Construction and Building Materials
Elsevier Sci Ltd, Oxford., 178, 92-101.
https://doi.org/10.1016/j.conbuildmat.2018.05.144
Ilić B, Mitrović A, Miličić L, Zdujić M. Compressive strength and microstructure of ordinary cured and autoclaved cement-based composites with mechanically activated kaolins. in Construction and Building Materials. 2018;178:92-101.
doi:10.1016/j.conbuildmat.2018.05.144 .
Ilić, Biljana, Mitrović, Aleksandra, Miličić, Ljiljana, Zdujić, Miodrag, "Compressive strength and microstructure of ordinary cured and autoclaved cement-based composites with mechanically activated kaolins" in Construction and Building Materials, 178 (2018):92-101,
https://doi.org/10.1016/j.conbuildmat.2018.05.144 . .
18
6
20

Compressive Strength Improvements of Cement-Based Composites Achieved with Additional Milling of Metakaolin

Ilić, Biljana; Mitrović, Aleksandra; Radonjanin, Vlastimir; Malešev, Mirjana; Zdujić, Miodrag

(Springer, Dordrecht, 2018)

TY  - CONF
AU  - Ilić, Biljana
AU  - Mitrović, Aleksandra
AU  - Radonjanin, Vlastimir
AU  - Malešev, Mirjana
AU  - Zdujić, Miodrag
PY  - 2018
UR  - http://rims.institutims.rs/handle/123456789/350
AB  - Kaolin from a Serbian deposit, having a high content of mica and quartz, disordered kaolinite and a high specific surface area, was used to prepare metakaolin (MK). The calcination at temperatures of 700 degrees C or 750 degrees C for 30 to 180 min resulted in MK having high pozzolanic activity, but also significant aglomeration of particles. In order to disperse aglomerates, MK was milled, which resulted in increased pozzolanic activity and reduced particle size. The effects of MK and additionally milled metakaolin (MKmill) on the composite strengths and microstructure of the pastes were compared. We prepared and investigated composites in which ordinary Portland cement (OPC) was replaced with 10% to 50% of MK or MKmill, as well as the representative samples of paste for determination of microstructure. Compressive strengths higher than the control were obtained for composites having up to 30% of MK and up to 40% of MKmill, respectively. Increase of composite strengths with MKmill was more pronounced at lower cement replacement levels (10% and 20%). Compressive strength of composites containing agglomerated MK were satisfactory, which suggests that milling of MK, as well as purification of kaolin, may not be necessary.
PB  - Springer, Dordrecht
C3  - Calcined Clays for Sustainable Concrete
T1  - Compressive Strength Improvements of Cement-Based Composites Achieved with Additional Milling of Metakaolin
EP  - 218
SP  - 212
VL  - 16
DO  - 10.1007/978-94-024-1207-9_34
ER  - 
@conference{
author = "Ilić, Biljana and Mitrović, Aleksandra and Radonjanin, Vlastimir and Malešev, Mirjana and Zdujić, Miodrag",
year = "2018",
abstract = "Kaolin from a Serbian deposit, having a high content of mica and quartz, disordered kaolinite and a high specific surface area, was used to prepare metakaolin (MK). The calcination at temperatures of 700 degrees C or 750 degrees C for 30 to 180 min resulted in MK having high pozzolanic activity, but also significant aglomeration of particles. In order to disperse aglomerates, MK was milled, which resulted in increased pozzolanic activity and reduced particle size. The effects of MK and additionally milled metakaolin (MKmill) on the composite strengths and microstructure of the pastes were compared. We prepared and investigated composites in which ordinary Portland cement (OPC) was replaced with 10% to 50% of MK or MKmill, as well as the representative samples of paste for determination of microstructure. Compressive strengths higher than the control were obtained for composites having up to 30% of MK and up to 40% of MKmill, respectively. Increase of composite strengths with MKmill was more pronounced at lower cement replacement levels (10% and 20%). Compressive strength of composites containing agglomerated MK were satisfactory, which suggests that milling of MK, as well as purification of kaolin, may not be necessary.",
publisher = "Springer, Dordrecht",
journal = "Calcined Clays for Sustainable Concrete",
title = "Compressive Strength Improvements of Cement-Based Composites Achieved with Additional Milling of Metakaolin",
pages = "218-212",
volume = "16",
doi = "10.1007/978-94-024-1207-9_34"
}
Ilić, B., Mitrović, A., Radonjanin, V., Malešev, M.,& Zdujić, M.. (2018). Compressive Strength Improvements of Cement-Based Composites Achieved with Additional Milling of Metakaolin. in Calcined Clays for Sustainable Concrete
Springer, Dordrecht., 16, 212-218.
https://doi.org/10.1007/978-94-024-1207-9_34
Ilić B, Mitrović A, Radonjanin V, Malešev M, Zdujić M. Compressive Strength Improvements of Cement-Based Composites Achieved with Additional Milling of Metakaolin. in Calcined Clays for Sustainable Concrete. 2018;16:212-218.
doi:10.1007/978-94-024-1207-9_34 .
Ilić, Biljana, Mitrović, Aleksandra, Radonjanin, Vlastimir, Malešev, Mirjana, Zdujić, Miodrag, "Compressive Strength Improvements of Cement-Based Composites Achieved with Additional Milling of Metakaolin" in Calcined Clays for Sustainable Concrete, 16 (2018):212-218,
https://doi.org/10.1007/978-94-024-1207-9_34 . .
4
1
4

Properties of the Cement-Based Composites with High Content of Metakaolin

Ilić, Biljana; Radonjanin, Vlastimir; Malešev, Mirjana; Zdujić, Miodrag; Mitrović, Aleksandra

(Springer, Dordrecht, 2018)

TY  - CONF
AU  - Ilić, Biljana
AU  - Radonjanin, Vlastimir
AU  - Malešev, Mirjana
AU  - Zdujić, Miodrag
AU  - Mitrović, Aleksandra
PY  - 2018
UR  - http://rims.institutims.rs/handle/123456789/332
AB  - Environmental concerns and sustainable development require increased replacement of cement. Most of previous studies have shown that the compressive strength of cement-based composites is maximized with a 20% content of metakaolin. We investigated composites prepared by replacing ordinary Portland Cement (OPC) with 30 to 50% of metakaolin (MK) and addition of appropriate amount of hydrated lime, which were ordinary cured for 2, 28 or 90 days. Hydration products and microstructure of the pastes were determined by X-ray diffraction (XRD), differential thermal analysis/thermal gravimetry (DTA/TG) and mercury intrusion porosimetry (MIP). MK was produced by calcination of kaolin from a Serbian deposit, which contained a high level of impurities. Replacement of OPC with 30% of MK achieved 28 days compressive strength equivalent to that of the control mix. Higher replacement levels, 40% and 50%, combined with the addition of hydrated lime, achieved satisfactory relative strengths of 94% and 87%, respectively. The positive contribution was particularly pronounced after 90 days for a composite containing 50% of MK. The results clearly showed a possibility of obtaining composites having acceptable compressive strength with reduced cement content in accordance with environmental and sustained development requirements.
PB  - Springer, Dordrecht
C3  - Calcined Clays for Sustainable Concrete
T1  - Properties of the Cement-Based Composites with High Content of Metakaolin
EP  - 225
SP  - 219
VL  - 16
DO  - 10.1007/978-94-024-1207-9_35
ER  - 
@conference{
author = "Ilić, Biljana and Radonjanin, Vlastimir and Malešev, Mirjana and Zdujić, Miodrag and Mitrović, Aleksandra",
year = "2018",
abstract = "Environmental concerns and sustainable development require increased replacement of cement. Most of previous studies have shown that the compressive strength of cement-based composites is maximized with a 20% content of metakaolin. We investigated composites prepared by replacing ordinary Portland Cement (OPC) with 30 to 50% of metakaolin (MK) and addition of appropriate amount of hydrated lime, which were ordinary cured for 2, 28 or 90 days. Hydration products and microstructure of the pastes were determined by X-ray diffraction (XRD), differential thermal analysis/thermal gravimetry (DTA/TG) and mercury intrusion porosimetry (MIP). MK was produced by calcination of kaolin from a Serbian deposit, which contained a high level of impurities. Replacement of OPC with 30% of MK achieved 28 days compressive strength equivalent to that of the control mix. Higher replacement levels, 40% and 50%, combined with the addition of hydrated lime, achieved satisfactory relative strengths of 94% and 87%, respectively. The positive contribution was particularly pronounced after 90 days for a composite containing 50% of MK. The results clearly showed a possibility of obtaining composites having acceptable compressive strength with reduced cement content in accordance with environmental and sustained development requirements.",
publisher = "Springer, Dordrecht",
journal = "Calcined Clays for Sustainable Concrete",
title = "Properties of the Cement-Based Composites with High Content of Metakaolin",
pages = "225-219",
volume = "16",
doi = "10.1007/978-94-024-1207-9_35"
}
Ilić, B., Radonjanin, V., Malešev, M., Zdujić, M.,& Mitrović, A.. (2018). Properties of the Cement-Based Composites with High Content of Metakaolin. in Calcined Clays for Sustainable Concrete
Springer, Dordrecht., 16, 219-225.
https://doi.org/10.1007/978-94-024-1207-9_35
Ilić B, Radonjanin V, Malešev M, Zdujić M, Mitrović A. Properties of the Cement-Based Composites with High Content of Metakaolin. in Calcined Clays for Sustainable Concrete. 2018;16:219-225.
doi:10.1007/978-94-024-1207-9_35 .
Ilić, Biljana, Radonjanin, Vlastimir, Malešev, Mirjana, Zdujić, Miodrag, Mitrović, Aleksandra, "Properties of the Cement-Based Composites with High Content of Metakaolin" in Calcined Clays for Sustainable Concrete, 16 (2018):219-225,
https://doi.org/10.1007/978-94-024-1207-9_35 . .
1
1
1

Study on the addition effect of metakaolin and mechanically activated kaolin on cement strength and microstructure under different curing conditions

Ilić, Biljana; Radonjanin, Vlastimir; Malešev, Mirjana; Zdujić, Miodrag; Mitrović, Aleksandra

(Elsevier Sci Ltd, Oxford, 2017)

TY  - JOUR
AU  - Ilić, Biljana
AU  - Radonjanin, Vlastimir
AU  - Malešev, Mirjana
AU  - Zdujić, Miodrag
AU  - Mitrović, Aleksandra
PY  - 2017
UR  - http://rims.institutims.rs/handle/123456789/312
AB  - The effects of thermally (MK) or mechanically activated kaolin (AK) on the compressive strength of mortars and microstructure of pastes were investigated. Mortar mixtures, in which 10%, 20% and 30% of ordinary Portland cement (OPC) was replaced by either MK or AK, were prepared (w/b of 0.5) and ordinary (age 2, 28 or 90 days) and autoclave cured. Hydration products were determined by X-ray diffraction (XRD) and differential thermal analysis/thermal gravimetry (DTA/TG) analysis, while microstructure was investigated by mercury intrusion porosimetry (MIP). MK substitution increases the compressive strength of ordinary-cured mortars, as a result of the higher content of reactive silica that caused more pronounced pozzolanic reaction, as well as by effective refinement of their pore structure. Positive effects on the compressive strength could be achieved up to 30% substitution of OPC by MK The OPC substitution by AK resulted in lower strengths of ordinary-cured mortars, compared to both MK mortars and reference. Higher specific surface area and finer particles of AK were insufficient to compensate, through filler effect, lower pozzolanic reaction and additional negative influence of the kaolinite presence. The highest compressive strength was obtained for mortar with 10% of AK (relative strength of 94%). In comparison to the reference, autoclaved MK and AK mortars, exhibited lower compressive strength, as a consequence of increasing the hydrogarnet formation, instead of tobermorite. The highest strength was achieved for mortar with 10% of AK.
PB  - Elsevier Sci Ltd, Oxford
T2  - Construction and Building Materials
T1  - Study on the addition effect of metakaolin and mechanically activated kaolin on cement strength and microstructure under different curing conditions
EP  - 252
SP  - 243
VL  - 133
DO  - 10.1016/j.conbuildmat.2016.12.068
ER  - 
@article{
author = "Ilić, Biljana and Radonjanin, Vlastimir and Malešev, Mirjana and Zdujić, Miodrag and Mitrović, Aleksandra",
year = "2017",
abstract = "The effects of thermally (MK) or mechanically activated kaolin (AK) on the compressive strength of mortars and microstructure of pastes were investigated. Mortar mixtures, in which 10%, 20% and 30% of ordinary Portland cement (OPC) was replaced by either MK or AK, were prepared (w/b of 0.5) and ordinary (age 2, 28 or 90 days) and autoclave cured. Hydration products were determined by X-ray diffraction (XRD) and differential thermal analysis/thermal gravimetry (DTA/TG) analysis, while microstructure was investigated by mercury intrusion porosimetry (MIP). MK substitution increases the compressive strength of ordinary-cured mortars, as a result of the higher content of reactive silica that caused more pronounced pozzolanic reaction, as well as by effective refinement of their pore structure. Positive effects on the compressive strength could be achieved up to 30% substitution of OPC by MK The OPC substitution by AK resulted in lower strengths of ordinary-cured mortars, compared to both MK mortars and reference. Higher specific surface area and finer particles of AK were insufficient to compensate, through filler effect, lower pozzolanic reaction and additional negative influence of the kaolinite presence. The highest compressive strength was obtained for mortar with 10% of AK (relative strength of 94%). In comparison to the reference, autoclaved MK and AK mortars, exhibited lower compressive strength, as a consequence of increasing the hydrogarnet formation, instead of tobermorite. The highest strength was achieved for mortar with 10% of AK.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Construction and Building Materials",
title = "Study on the addition effect of metakaolin and mechanically activated kaolin on cement strength and microstructure under different curing conditions",
pages = "252-243",
volume = "133",
doi = "10.1016/j.conbuildmat.2016.12.068"
}
Ilić, B., Radonjanin, V., Malešev, M., Zdujić, M.,& Mitrović, A.. (2017). Study on the addition effect of metakaolin and mechanically activated kaolin on cement strength and microstructure under different curing conditions. in Construction and Building Materials
Elsevier Sci Ltd, Oxford., 133, 243-252.
https://doi.org/10.1016/j.conbuildmat.2016.12.068
Ilić B, Radonjanin V, Malešev M, Zdujić M, Mitrović A. Study on the addition effect of metakaolin and mechanically activated kaolin on cement strength and microstructure under different curing conditions. in Construction and Building Materials. 2017;133:243-252.
doi:10.1016/j.conbuildmat.2016.12.068 .
Ilić, Biljana, Radonjanin, Vlastimir, Malešev, Mirjana, Zdujić, Miodrag, Mitrović, Aleksandra, "Study on the addition effect of metakaolin and mechanically activated kaolin on cement strength and microstructure under different curing conditions" in Construction and Building Materials, 133 (2017):243-252,
https://doi.org/10.1016/j.conbuildmat.2016.12.068 . .
44
22
43

Uticaj termički i mehanohemijski aktivirane kaolinske gline na mehanička svojstva i strukturu cementnih kompozita

Ilić, Biljana

(Универзитет у Новом Саду, Факултет техничких наука, 2016)

TY  - THES
AU  - Ilić, Biljana
PY  - 2016
UR  - https://nardus.mpn.gov.rs/handle/123456789/6800
UR  - 
UR  - 
UR  - http://rims.institutims.rs/handle/123456789/7
AB  - Predmet ovog istraživanja je razvoj nove generacije mineralnih dodataka, dobijenih termičkom i mehanohemijskom aktivacijom kaolinske gline i ispitivanje svojstava kompozita, u kojima je deo portland cementa zamenjen dobijenim pucolanskim materijalima, metakaolinom i amorfnim kaolinom, za različite režime nege. Rezultati su pokazali da su termička i mehanohemijska aktivacija kaolinske gline jednako pogodne metode za dobijanje pucolanskih materijala. Pozitivni efekti na čvrstoće pri pritisku postižu se primenom do 30 % metakaolina u kompozitima pri normalnom režimu nege, a uz dodatno mlevenje, sadržaj metakaolina se može povećati do 40 %, uz dodatak CH. Amorfni kaolin se može primeniti u kompozitima, sa stepenom zamene portland cementa do 10 %, pri normalnom i autoklaviranom režimu nege.
AB  - The subject of this research is development of a new generation of mineral admixtures, obtained by thermal and mechanochemical activation of kaolin clay, and testing of the properties of the cement based composites, where a part of the portland cement is replaced by pozzolanic materials, metakaolin and amorphous kaolin, for different curing conditions. The results showed that thermal and mechanochemical activation of kaolin clay were equally suitable for obtaining pozzolanic materials. Positive effects on the compressive strength could be achieved by using up to 30 % of MK, and with additional grinding after thermal activation, content of MK could be increased up to 40 %, with the addition of CH, under the normal curing conditions. Amorphous kaolin could be used in composites with a cement replacement level of 10 %, under the normal and autoclave curing conditions.
PB  - Универзитет у Новом Саду, Факултет техничких наука
T1  - Uticaj termički i mehanohemijski aktivirane kaolinske gline na mehanička svojstva i strukturu cementnih kompozita
T1  - Effect of thermal and mechanochemical activated kaolin clay onthe mechanical properties and structure of the cement basedcomposites
UR  - https://hdl.handle.net/21.15107/rcub_nardus_9593
ER  - 
@phdthesis{
author = "Ilić, Biljana",
year = "2016",
abstract = "Predmet ovog istraživanja je razvoj nove generacije mineralnih dodataka, dobijenih termičkom i mehanohemijskom aktivacijom kaolinske gline i ispitivanje svojstava kompozita, u kojima je deo portland cementa zamenjen dobijenim pucolanskim materijalima, metakaolinom i amorfnim kaolinom, za različite režime nege. Rezultati su pokazali da su termička i mehanohemijska aktivacija kaolinske gline jednako pogodne metode za dobijanje pucolanskih materijala. Pozitivni efekti na čvrstoće pri pritisku postižu se primenom do 30 % metakaolina u kompozitima pri normalnom režimu nege, a uz dodatno mlevenje, sadržaj metakaolina se može povećati do 40 %, uz dodatak CH. Amorfni kaolin se može primeniti u kompozitima, sa stepenom zamene portland cementa do 10 %, pri normalnom i autoklaviranom režimu nege., The subject of this research is development of a new generation of mineral admixtures, obtained by thermal and mechanochemical activation of kaolin clay, and testing of the properties of the cement based composites, where a part of the portland cement is replaced by pozzolanic materials, metakaolin and amorphous kaolin, for different curing conditions. The results showed that thermal and mechanochemical activation of kaolin clay were equally suitable for obtaining pozzolanic materials. Positive effects on the compressive strength could be achieved by using up to 30 % of MK, and with additional grinding after thermal activation, content of MK could be increased up to 40 %, with the addition of CH, under the normal curing conditions. Amorphous kaolin could be used in composites with a cement replacement level of 10 %, under the normal and autoclave curing conditions.",
publisher = "Универзитет у Новом Саду, Факултет техничких наука",
title = "Uticaj termički i mehanohemijski aktivirane kaolinske gline na mehanička svojstva i strukturu cementnih kompozita, Effect of thermal and mechanochemical activated kaolin clay onthe mechanical properties and structure of the cement basedcomposites",
url = "https://hdl.handle.net/21.15107/rcub_nardus_9593"
}
Ilić, B.. (2016). Uticaj termički i mehanohemijski aktivirane kaolinske gline na mehanička svojstva i strukturu cementnih kompozita. 
Универзитет у Новом Саду, Факултет техничких наука..
https://hdl.handle.net/21.15107/rcub_nardus_9593
Ilić B. Uticaj termički i mehanohemijski aktivirane kaolinske gline na mehanička svojstva i strukturu cementnih kompozita. 2016;.
https://hdl.handle.net/21.15107/rcub_nardus_9593 .
Ilić, Biljana, "Uticaj termički i mehanohemijski aktivirane kaolinske gline na mehanička svojstva i strukturu cementnih kompozita" (2016),
https://hdl.handle.net/21.15107/rcub_nardus_9593 .

Effects of mechanical and thermal activation on pozzolanic activity of kaolin containing mica

Ilić, Biljana; Radonjanin, Vlastimir; Malešev, Mirjana; Zdujić, Miodrag; Mitrović, Aleksandra

(Elsevier Science Bv, Amsterdam, 2016)

TY  - JOUR
AU  - Ilić, Biljana
AU  - Radonjanin, Vlastimir
AU  - Malešev, Mirjana
AU  - Zdujić, Miodrag
AU  - Mitrović, Aleksandra
PY  - 2016
UR  - http://rims.institutims.rs/handle/123456789/297
AB  - Kaolin from a Serbian deposit, characterized by high content of impurities, such as mica and quartz, disordered kaolinite and high specific surface area, was subjected to thermal and mechanical activation on a large scale. Activations were carried out with a goal to investigate the effects of applied methods on the chemical, structural and morphological changes that occurred in the kaolin, and their influence on the pozzolanic activity. The changes were monitored using XRD, FTIR, TG/DTA, PSD, BET and SEM analyses. Pozzolanic activity was evaluated by determination of the 7-day compressive strength conducted on the lime mortars. The results showed that mechanical activation by milling the kaolin for 20 h in the conventional horizontal ball mill was competitive for obtaining pozzolana as thermal activation. Pozzolanic activity of thermally activated kaolin was mainly influenced by formation of metakaolin. Combined effects (such as significant specific surface area increase, as well as partial kaolinite and complete mica phase amorphization) were dominant in pozzolanic activity of mechanically activated kaolin.
PB  - Elsevier Science Bv, Amsterdam
T2  - Applied Clay Science
T1  - Effects of mechanical and thermal activation on pozzolanic activity of kaolin containing mica
EP  - 181
SP  - 173
VL  - 123
DO  - 10.1016/j.clay.2016.01.029
ER  - 
@article{
author = "Ilić, Biljana and Radonjanin, Vlastimir and Malešev, Mirjana and Zdujić, Miodrag and Mitrović, Aleksandra",
year = "2016",
abstract = "Kaolin from a Serbian deposit, characterized by high content of impurities, such as mica and quartz, disordered kaolinite and high specific surface area, was subjected to thermal and mechanical activation on a large scale. Activations were carried out with a goal to investigate the effects of applied methods on the chemical, structural and morphological changes that occurred in the kaolin, and their influence on the pozzolanic activity. The changes were monitored using XRD, FTIR, TG/DTA, PSD, BET and SEM analyses. Pozzolanic activity was evaluated by determination of the 7-day compressive strength conducted on the lime mortars. The results showed that mechanical activation by milling the kaolin for 20 h in the conventional horizontal ball mill was competitive for obtaining pozzolana as thermal activation. Pozzolanic activity of thermally activated kaolin was mainly influenced by formation of metakaolin. Combined effects (such as significant specific surface area increase, as well as partial kaolinite and complete mica phase amorphization) were dominant in pozzolanic activity of mechanically activated kaolin.",
publisher = "Elsevier Science Bv, Amsterdam",
journal = "Applied Clay Science",
title = "Effects of mechanical and thermal activation on pozzolanic activity of kaolin containing mica",
pages = "181-173",
volume = "123",
doi = "10.1016/j.clay.2016.01.029"
}
Ilić, B., Radonjanin, V., Malešev, M., Zdujić, M.,& Mitrović, A.. (2016). Effects of mechanical and thermal activation on pozzolanic activity of kaolin containing mica. in Applied Clay Science
Elsevier Science Bv, Amsterdam., 123, 173-181.
https://doi.org/10.1016/j.clay.2016.01.029
Ilić B, Radonjanin V, Malešev M, Zdujić M, Mitrović A. Effects of mechanical and thermal activation on pozzolanic activity of kaolin containing mica. in Applied Clay Science. 2016;123:173-181.
doi:10.1016/j.clay.2016.01.029 .
Ilić, Biljana, Radonjanin, Vlastimir, Malešev, Mirjana, Zdujić, Miodrag, Mitrović, Aleksandra, "Effects of mechanical and thermal activation on pozzolanic activity of kaolin containing mica" in Applied Clay Science, 123 (2016):173-181,
https://doi.org/10.1016/j.clay.2016.01.029 . .
108
60
109

The effect of amorphous kaolin on properties of cement-based composites

Ilić, Biljana; Mitrović, Aleksandra; Zdujić, Miodrag

(2015)

TY  - CONF
AU  - Ilić, Biljana
AU  - Mitrović, Aleksandra
AU  - Zdujić, Miodrag
PY  - 2015
UR  - http://rims.institutims.rs/handle/123456789/560
C3  - 3rd International Conference of the Serbian Society for Ceramic Materials -
T1  - The effect of amorphous kaolin on properties of cement-based composites
UR  - https://hdl.handle.net/21.15107/rcub_rims_560
ER  - 
@conference{
author = "Ilić, Biljana and Mitrović, Aleksandra and Zdujić, Miodrag",
year = "2015",
journal = "3rd International Conference of the Serbian Society for Ceramic Materials -",
title = "The effect of amorphous kaolin on properties of cement-based composites",
url = "https://hdl.handle.net/21.15107/rcub_rims_560"
}
Ilić, B., Mitrović, A.,& Zdujić, M.. (2015). The effect of amorphous kaolin on properties of cement-based composites. in 3rd International Conference of the Serbian Society for Ceramic Materials -.
https://hdl.handle.net/21.15107/rcub_rims_560
Ilić B, Mitrović A, Zdujić M. The effect of amorphous kaolin on properties of cement-based composites. in 3rd International Conference of the Serbian Society for Ceramic Materials -. 2015;.
https://hdl.handle.net/21.15107/rcub_rims_560 .
Ilić, Biljana, Mitrović, Aleksandra, Zdujić, Miodrag, "The effect of amorphous kaolin on properties of cement-based composites" in 3rd International Conference of the Serbian Society for Ceramic Materials - (2015),
https://hdl.handle.net/21.15107/rcub_rims_560 .

Dobijanje metakaolina termičkim tretmanom kaolinske gline

Ilić, Biljana; Mitrović, Aleksandra; Miličić, Ljiljana

(Savez hemijskih inženjera, Beograd, 2010)

TY  - JOUR
AU  - Ilić, Biljana
AU  - Mitrović, Aleksandra
AU  - Miličić, Ljiljana
PY  - 2010
UR  - http://rims.institutims.rs/handle/123456789/117
AB  - U radu su prikazani rezultati istraživanja dobijanja metakaolina termičkim tretmanom domaće kaolinske gline. Polazna sirovina je bila kaolinska glina sa ležišta Vrbica (Aranđelovački basen), čiji je sadržaj kaolinita oko 80% i gubitak žarenjem 12,33%. Diferencijalnom termičkom analizom (DTA/TGA) utvrđeno je da do dehidroksilacije i transformacije kaolinita u metakaolinit dolazi u opsegu temperature 450-700°C. Proces kalcinacije je praćen termičkim tretmanom kaolinske gline u laboratorijskim uslovima na temperaturama 550, 600, 650 i 700°C, različito vreme: 15, 30, 60, 90, 120, 150 i 180 min. Kao glavni kvantitativni kriterijum za ocenu ponašanja kaolinita u procesu kalcinacije, korišćen je stepen dehidroksilacije materijala, Dtg. Optimalni parametri procesa kalcinacije, pri kojima je postignut stepen dehidroksilacije 0,97, jesu: temperatura 650°C i vreme zagrevanja 90 min. Transformacije kaolinita u metakaolinit potvrđene su rendgenskom strukturnom analizom i IR spektroskopijom polazne gline i termički tretiranih glina. Na difraktogramima termički tretiranih glina nisu uočeni karakteristični pikovi kaolinita, dok IR spektri pokazuju odsustvo karakterističnih veza kaolinita. Pucolanska aktivnost metakaolina, određena direktnom metodom, pri optimalnim uslovima kalcinacije iznosi 0,65 g Ca(OH)2 / g metakaolina. Na osnovu ovih istraživanja može se zaključiti da je kaolinska glina sa nalazišta Vrbica pogodna za proizvodnju metakaolina, odgovarajuće pucolanske aktivnosti, a koji se može primenjivati u svojstvu dopunskog cementnog materijala u sistemima na bazi cementa.
AB  - The metakaolin was produced by thermal treatment (calcination) of the starting high-quality kaolin clay from Serbia. The optimal calcination parameters, for which nearly complete dehydroxylation of the material was achieved, are: temperature 650°C and heating time of 90 min. The conversion of the kaolinite to metakaolinite was confirmed by XRD and IR analyses of the starting and thermally treated kaolin samples. The pozzolanic activity was determined by Chapelle test. The obtained value 0.65 g Ca(OH)2/g of metakaolin indicates that produced metakaolin may be used as supplementary cementitious material.
PB  - Savez hemijskih inženjera, Beograd
T2  - Hemijska industrija
T1  - Dobijanje metakaolina termičkim tretmanom kaolinske gline
T1  - Thermal treatment of kaolin clay to obtain metakaolin
EP  - 356
IS  - 4
SP  - 351
VL  - 64
DO  - 10.2298/HEMIND100322014I
ER  - 
@article{
author = "Ilić, Biljana and Mitrović, Aleksandra and Miličić, Ljiljana",
year = "2010",
abstract = "U radu su prikazani rezultati istraživanja dobijanja metakaolina termičkim tretmanom domaće kaolinske gline. Polazna sirovina je bila kaolinska glina sa ležišta Vrbica (Aranđelovački basen), čiji je sadržaj kaolinita oko 80% i gubitak žarenjem 12,33%. Diferencijalnom termičkom analizom (DTA/TGA) utvrđeno je da do dehidroksilacije i transformacije kaolinita u metakaolinit dolazi u opsegu temperature 450-700°C. Proces kalcinacije je praćen termičkim tretmanom kaolinske gline u laboratorijskim uslovima na temperaturama 550, 600, 650 i 700°C, različito vreme: 15, 30, 60, 90, 120, 150 i 180 min. Kao glavni kvantitativni kriterijum za ocenu ponašanja kaolinita u procesu kalcinacije, korišćen je stepen dehidroksilacije materijala, Dtg. Optimalni parametri procesa kalcinacije, pri kojima je postignut stepen dehidroksilacije 0,97, jesu: temperatura 650°C i vreme zagrevanja 90 min. Transformacije kaolinita u metakaolinit potvrđene su rendgenskom strukturnom analizom i IR spektroskopijom polazne gline i termički tretiranih glina. Na difraktogramima termički tretiranih glina nisu uočeni karakteristični pikovi kaolinita, dok IR spektri pokazuju odsustvo karakterističnih veza kaolinita. Pucolanska aktivnost metakaolina, određena direktnom metodom, pri optimalnim uslovima kalcinacije iznosi 0,65 g Ca(OH)2 / g metakaolina. Na osnovu ovih istraživanja može se zaključiti da je kaolinska glina sa nalazišta Vrbica pogodna za proizvodnju metakaolina, odgovarajuće pucolanske aktivnosti, a koji se može primenjivati u svojstvu dopunskog cementnog materijala u sistemima na bazi cementa., The metakaolin was produced by thermal treatment (calcination) of the starting high-quality kaolin clay from Serbia. The optimal calcination parameters, for which nearly complete dehydroxylation of the material was achieved, are: temperature 650°C and heating time of 90 min. The conversion of the kaolinite to metakaolinite was confirmed by XRD and IR analyses of the starting and thermally treated kaolin samples. The pozzolanic activity was determined by Chapelle test. The obtained value 0.65 g Ca(OH)2/g of metakaolin indicates that produced metakaolin may be used as supplementary cementitious material.",
publisher = "Savez hemijskih inženjera, Beograd",
journal = "Hemijska industrija",
title = "Dobijanje metakaolina termičkim tretmanom kaolinske gline, Thermal treatment of kaolin clay to obtain metakaolin",
pages = "356-351",
number = "4",
volume = "64",
doi = "10.2298/HEMIND100322014I"
}
Ilić, B., Mitrović, A.,& Miličić, L.. (2010). Dobijanje metakaolina termičkim tretmanom kaolinske gline. in Hemijska industrija
Savez hemijskih inženjera, Beograd., 64(4), 351-356.
https://doi.org/10.2298/HEMIND100322014I
Ilić B, Mitrović A, Miličić L. Dobijanje metakaolina termičkim tretmanom kaolinske gline. in Hemijska industrija. 2010;64(4):351-356.
doi:10.2298/HEMIND100322014I .
Ilić, Biljana, Mitrović, Aleksandra, Miličić, Ljiljana, "Dobijanje metakaolina termičkim tretmanom kaolinske gline" in Hemijska industrija, 64, no. 4 (2010):351-356,
https://doi.org/10.2298/HEMIND100322014I . .
184
123
183

Karakteristike portland cementa sa dodatkom metakaolina dobijenog kalcinacijom domaće kaolinske gline

Mitrović, Aleksandra; Jevtić, Dragica; Miličić, Ljiljana; Ilić, Biljana

(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd, 2010)

TY  - JOUR
AU  - Mitrović, Aleksandra
AU  - Jevtić, Dragica
AU  - Miličić, Ljiljana
AU  - Ilić, Biljana
PY  - 2010
UR  - http://rims.institutims.rs/handle/123456789/109
AB  - U Institutu za ispitivanje materijala IMS-Beograd razvijena je tehnologija za dobijanje pucolanskog dodatka - metakaolina iz domaće kaolinske gline Vrbica. Verifikacija pucolanskog ponašanja proizvedenog metakaolina izvršena je određivanjem karakteristika portland cementa sa dodatkom 5 - 20 % metakaolina i upoređenjem sa karakteristikama portland cementa. Upoređenjem karakteristika portland cementa (CEM I) i cementa sa dodatkom metakaolina (CEM II) utvrđeno je da se dodatkom metakaolina skraćuje vreme vezivanja (početak i kraj) i postižu niže vrednosti čvrstoća pri pritisku nakon 2 dana. Nezavisno od udela metakaolina, čvrstoća pri pritisku nakon 7 i 28 dana je veća od čvrstoća portland cementa. Utvrđeno je da se pri dodatku 10 i 15 % metakaolina cementu, čvrstoća pri pritisku povećava približno 15 %.
AB  - The technology for obtaining pozzolanic additive - metakaolin, from domestic kaolin clay Vrbica, is developed in the Institute for testing of materials IMS-Belgrade. Pozzolanic behavior of the produced metakaolin is verified by determining the characteristics of Portland cement made with addition of 5 to 20 % by mass metakaolin. The characteristics of Portland cement made with addition of metakaolin (CEM II) were compared with Portland cement (CEM I), which was used as a control sample. The composite cements have lower setting time (initial and final) as well as compressive strengths after 2 days. Compressive strengths after 7 and 28 days are greater than compressive strengths obtained for the control cement, independently on the metakaolin content. The addition of 10 and 15 % by mass metakaolin increases compressive strengths for approximately 15 %.
PB  - Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd
T2  - Materijali i konstrukcije
T1  - Karakteristike portland cementa sa dodatkom metakaolina dobijenog kalcinacijom domaće kaolinske gline
T1  - Characteristics of Portland cement with addition of metakaolin obtained by calcinations of domestic kaolin clay
EP  - 43
IS  - 3
SP  - 32
VL  - 53
UR  - https://hdl.handle.net/21.15107/rcub_rims_109
ER  - 
@article{
author = "Mitrović, Aleksandra and Jevtić, Dragica and Miličić, Ljiljana and Ilić, Biljana",
year = "2010",
abstract = "U Institutu za ispitivanje materijala IMS-Beograd razvijena je tehnologija za dobijanje pucolanskog dodatka - metakaolina iz domaće kaolinske gline Vrbica. Verifikacija pucolanskog ponašanja proizvedenog metakaolina izvršena je određivanjem karakteristika portland cementa sa dodatkom 5 - 20 % metakaolina i upoređenjem sa karakteristikama portland cementa. Upoređenjem karakteristika portland cementa (CEM I) i cementa sa dodatkom metakaolina (CEM II) utvrđeno je da se dodatkom metakaolina skraćuje vreme vezivanja (početak i kraj) i postižu niže vrednosti čvrstoća pri pritisku nakon 2 dana. Nezavisno od udela metakaolina, čvrstoća pri pritisku nakon 7 i 28 dana je veća od čvrstoća portland cementa. Utvrđeno je da se pri dodatku 10 i 15 % metakaolina cementu, čvrstoća pri pritisku povećava približno 15 %., The technology for obtaining pozzolanic additive - metakaolin, from domestic kaolin clay Vrbica, is developed in the Institute for testing of materials IMS-Belgrade. Pozzolanic behavior of the produced metakaolin is verified by determining the characteristics of Portland cement made with addition of 5 to 20 % by mass metakaolin. The characteristics of Portland cement made with addition of metakaolin (CEM II) were compared with Portland cement (CEM I), which was used as a control sample. The composite cements have lower setting time (initial and final) as well as compressive strengths after 2 days. Compressive strengths after 7 and 28 days are greater than compressive strengths obtained for the control cement, independently on the metakaolin content. The addition of 10 and 15 % by mass metakaolin increases compressive strengths for approximately 15 %.",
publisher = "Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd",
journal = "Materijali i konstrukcije",
title = "Karakteristike portland cementa sa dodatkom metakaolina dobijenog kalcinacijom domaće kaolinske gline, Characteristics of Portland cement with addition of metakaolin obtained by calcinations of domestic kaolin clay",
pages = "43-32",
number = "3",
volume = "53",
url = "https://hdl.handle.net/21.15107/rcub_rims_109"
}
Mitrović, A., Jevtić, D., Miličić, L.,& Ilić, B.. (2010). Karakteristike portland cementa sa dodatkom metakaolina dobijenog kalcinacijom domaće kaolinske gline. in Materijali i konstrukcije
Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd., 53(3), 32-43.
https://hdl.handle.net/21.15107/rcub_rims_109
Mitrović A, Jevtić D, Miličić L, Ilić B. Karakteristike portland cementa sa dodatkom metakaolina dobijenog kalcinacijom domaće kaolinske gline. in Materijali i konstrukcije. 2010;53(3):32-43.
https://hdl.handle.net/21.15107/rcub_rims_109 .
Mitrović, Aleksandra, Jevtić, Dragica, Miličić, Ljiljana, Ilić, Biljana, "Karakteristike portland cementa sa dodatkom metakaolina dobijenog kalcinacijom domaće kaolinske gline" in Materijali i konstrukcije, 53, no. 3 (2010):32-43,
https://hdl.handle.net/21.15107/rcub_rims_109 .

The Sustainable Development of the Cement Industry

Mitrović, Aleksandra; Ilić, Biljana; Miličić, Ljiljana; Odanović, Zoran

(2009)

TY  - CONF
AU  - Mitrović, Aleksandra
AU  - Ilić, Biljana
AU  - Miličić, Ljiljana
AU  - Odanović, Zoran
PY  - 2009
UR  - http://rims.institutims.rs/handle/123456789/573
AB  - One of the globally accepted principles in the Sustainable Development Strategy is sustainable production and consumption which are including environmental, material and energy efficiency in each stage of production of goods and services, starting from design, production, to primary and secondary use and recycling and disposal. Portland cement is a pre-eminent construction material which world production exceeds 2 billion t per year. Despite this success, the industry faces challenges related to improved durability and enhanced performance while at the same time improving the sustainability of production. Portland cement is not environmentally very friendly material. The production of 1t of portland cement requires 1.6 t of raw materials, primarily good quality limestone and clay. Also, production of 1t of portland cement clinker is said to create approximately 1t of CO2 and other greenhouse gases (GHG) and requires lots of fuels and energy. The cement industry is fully aware of their part of the responsibility in implementing all the necessary measures and over the past decades, has been actively involved in seeking ways to consume less energy and natural resources, and emit less CO2 per unit of cement produced. Cement industry can significantly contributes to the sustainable development by continuously reducing the CO2 emission from cement production by increased use of biofuels and alternative raw materials as introducing modified low-energy clinker types and cements with reduced clinker content. .
C3  - International Scientific Conference on Globalization and Enviroment, Belgrade
T1  - The Sustainable Development of the Cement Industry
SP  - 116
UR  - https://hdl.handle.net/21.15107/rcub_rims_573
ER  - 
@conference{
author = "Mitrović, Aleksandra and Ilić, Biljana and Miličić, Ljiljana and Odanović, Zoran",
year = "2009",
abstract = "One of the globally accepted principles in the Sustainable Development Strategy is sustainable production and consumption which are including environmental, material and energy efficiency in each stage of production of goods and services, starting from design, production, to primary and secondary use and recycling and disposal. Portland cement is a pre-eminent construction material which world production exceeds 2 billion t per year. Despite this success, the industry faces challenges related to improved durability and enhanced performance while at the same time improving the sustainability of production. Portland cement is not environmentally very friendly material. The production of 1t of portland cement requires 1.6 t of raw materials, primarily good quality limestone and clay. Also, production of 1t of portland cement clinker is said to create approximately 1t of CO2 and other greenhouse gases (GHG) and requires lots of fuels and energy. The cement industry is fully aware of their part of the responsibility in implementing all the necessary measures and over the past decades, has been actively involved in seeking ways to consume less energy and natural resources, and emit less CO2 per unit of cement produced. Cement industry can significantly contributes to the sustainable development by continuously reducing the CO2 emission from cement production by increased use of biofuels and alternative raw materials as introducing modified low-energy clinker types and cements with reduced clinker content. .",
journal = "International Scientific Conference on Globalization and Enviroment, Belgrade",
title = "The Sustainable Development of the Cement Industry",
pages = "116",
url = "https://hdl.handle.net/21.15107/rcub_rims_573"
}
Mitrović, A., Ilić, B., Miličić, L.,& Odanović, Z.. (2009). The Sustainable Development of the Cement Industry. in International Scientific Conference on Globalization and Enviroment, Belgrade, 116.
https://hdl.handle.net/21.15107/rcub_rims_573
Mitrović A, Ilić B, Miličić L, Odanović Z. The Sustainable Development of the Cement Industry. in International Scientific Conference on Globalization and Enviroment, Belgrade. 2009;:116.
https://hdl.handle.net/21.15107/rcub_rims_573 .
Mitrović, Aleksandra, Ilić, Biljana, Miličić, Ljiljana, Odanović, Zoran, "The Sustainable Development of the Cement Industry" in International Scientific Conference on Globalization and Enviroment, Belgrade (2009):116,
https://hdl.handle.net/21.15107/rcub_rims_573 .

Thermal Threatment of Kaolin Clay in Order to Obtain Metakaolin

Mitrović, Aleksandra; Ilić, Biljana; Miličić, Ljiljana; Stojanović, Mirjana

(2009)

TY  - CONF
AU  - Mitrović, Aleksandra
AU  - Ilić, Biljana
AU  - Miličić, Ljiljana
AU  - Stojanović, Mirjana
PY  - 2009
UR  - http://rims.institutims.rs/handle/123456789/567
C3  - I Međunarodni kongres "Inženjerstvo, materijali i menadžment u procesnoj industriji, Jahorina, BIH
T1  - Thermal Threatment of Kaolin Clay in Order to Obtain Metakaolin
EP  - 47
SP  - 44
UR  - https://hdl.handle.net/21.15107/rcub_rims_567
ER  - 
@conference{
author = "Mitrović, Aleksandra and Ilić, Biljana and Miličić, Ljiljana and Stojanović, Mirjana",
year = "2009",
journal = "I Međunarodni kongres "Inženjerstvo, materijali i menadžment u procesnoj industriji, Jahorina, BIH",
title = "Thermal Threatment of Kaolin Clay in Order to Obtain Metakaolin",
pages = "47-44",
url = "https://hdl.handle.net/21.15107/rcub_rims_567"
}
Mitrović, A., Ilić, B., Miličić, L.,& Stojanović, M.. (2009). Thermal Threatment of Kaolin Clay in Order to Obtain Metakaolin. in I Međunarodni kongres "Inženjerstvo, materijali i menadžment u procesnoj industriji, Jahorina, BIH, 44-47.
https://hdl.handle.net/21.15107/rcub_rims_567
Mitrović A, Ilić B, Miličić L, Stojanović M. Thermal Threatment of Kaolin Clay in Order to Obtain Metakaolin. in I Međunarodni kongres "Inženjerstvo, materijali i menadžment u procesnoj industriji, Jahorina, BIH. 2009;:44-47.
https://hdl.handle.net/21.15107/rcub_rims_567 .
Mitrović, Aleksandra, Ilić, Biljana, Miličić, Ljiljana, Stojanović, Mirjana, "Thermal Threatment of Kaolin Clay in Order to Obtain Metakaolin" in I Međunarodni kongres "Inženjerstvo, materijali i menadžment u procesnoj industriji, Jahorina, BIH (2009):44-47,
https://hdl.handle.net/21.15107/rcub_rims_567 .

Evaluation of Kaolin Clay from "Kaolin", Valjevo as a Raw Material for Cement and Concrete Industry

Ilić, Biljana; Mitrović, Aleksandra; Miličić, Ljiljana; Stojanović, Mirjana

(2009)

TY  - CONF
AU  - Ilić, Biljana
AU  - Mitrović, Aleksandra
AU  - Miličić, Ljiljana
AU  - Stojanović, Mirjana
PY  - 2009
UR  - http://rims.institutims.rs/handle/123456789/566
C3  - I Međunarodni kongres "Inženjerstvo, materijali i menadžment u procesnoj industriji, Jahorina, BIH
T1  - Evaluation of Kaolin Clay from "Kaolin", Valjevo as a Raw Material for Cement and Concrete Industry
EP  - 51
SP  - 48
UR  - https://hdl.handle.net/21.15107/rcub_rims_566
ER  - 
@conference{
author = "Ilić, Biljana and Mitrović, Aleksandra and Miličić, Ljiljana and Stojanović, Mirjana",
year = "2009",
journal = "I Međunarodni kongres "Inženjerstvo, materijali i menadžment u procesnoj industriji, Jahorina, BIH",
title = "Evaluation of Kaolin Clay from "Kaolin", Valjevo as a Raw Material for Cement and Concrete Industry",
pages = "51-48",
url = "https://hdl.handle.net/21.15107/rcub_rims_566"
}
Ilić, B., Mitrović, A., Miličić, L.,& Stojanović, M.. (2009). Evaluation of Kaolin Clay from "Kaolin", Valjevo as a Raw Material for Cement and Concrete Industry. in I Međunarodni kongres "Inženjerstvo, materijali i menadžment u procesnoj industriji, Jahorina, BIH, 48-51.
https://hdl.handle.net/21.15107/rcub_rims_566
Ilić B, Mitrović A, Miličić L, Stojanović M. Evaluation of Kaolin Clay from "Kaolin", Valjevo as a Raw Material for Cement and Concrete Industry. in I Međunarodni kongres "Inženjerstvo, materijali i menadžment u procesnoj industriji, Jahorina, BIH. 2009;:48-51.
https://hdl.handle.net/21.15107/rcub_rims_566 .
Ilić, Biljana, Mitrović, Aleksandra, Miličić, Ljiljana, Stojanović, Mirjana, "Evaluation of Kaolin Clay from "Kaolin", Valjevo as a Raw Material for Cement and Concrete Industry" in I Međunarodni kongres "Inženjerstvo, materijali i menadžment u procesnoj industriji, Jahorina, BIH (2009):48-51,
https://hdl.handle.net/21.15107/rcub_rims_566 .

Research of possibilities for use domestic kaolin clays for production of metakaolin

Mitrović, Aleksandra; Komljenović, Miroslav M.; Ilić, Biljana

(Savez hemijskih inženjera, Beograd, 2009)

TY  - JOUR
AU  - Mitrović, Aleksandra
AU  - Komljenović, Miroslav M.
AU  - Ilić, Biljana
PY  - 2009
UR  - http://rims.institutims.rs/handle/123456789/93
AB  - Environmental concerns coming from the high energy consumption and CO2 emission associated with cement production have brought about pressures to reduce cement consumption through the use of new materials which can be applied for substitution of a part of clinker in Portland cement or a part of cement in concrete. One of the materials that satisfy requirements of sustainable development and, when added in appropriate shares, improves the properties of cement, mortars and concrete, is metakaolin (MK), a processed pozzolana. The main and widely used raw material for production of metakaolin is kaolin clay. MK is produced by calcination or "thermal activation" of kaolin clay. The possibilities for metakaolin production are strongly related to the characteristics of the used kaolin clay. The samples of domestic kaolin clay used in this study were provided by factories Kaolin, Valjevo, and Keramika, Mladenovac. Chemical composition, mineralogical composition and thermal properties of these samples were determined. Thermal analysis (simultaneous recording of TG, DTG and DTA signals) was carried out at the temperature range from 20 to 1200 degrees C. For both clays the results show that the loss of mass occurred in two stages. The dehydroxillation of kaolinite and formation of metakaolin occurred in the second stage. Minerals quartz and kaolinite are dominant in the clay Kaolin, Valjevo. Dehydroxillation of kaolinite and formation of metakaolin took place in the temperature range 350-800 degrees C. This clay does not have clearly distinct exothermic and endothermic peaks. Clay from Keramika, Mladenovac, has a higher content of the kaolinite mineral, i.e. 81.51%. The dehydroxillation of kaolinite and fori-nation of metakaolin occured in the temperature range 400-700 degrees C. This clay has two distinct endothermic peaks at 60 and 490 degrees C. All these results show that both clays can be used for production of metakaolin.
PB  - Savez hemijskih inženjera, Beograd
T2  - Hemijska industrija
T1  - Research of possibilities for use domestic kaolin clays for production of metakaolin
EP  - 113
IS  - 2
SP  - 107
VL  - 63
DO  - 10.2298/HEMIND0902107M
ER  - 
@article{
author = "Mitrović, Aleksandra and Komljenović, Miroslav M. and Ilić, Biljana",
year = "2009",
abstract = "Environmental concerns coming from the high energy consumption and CO2 emission associated with cement production have brought about pressures to reduce cement consumption through the use of new materials which can be applied for substitution of a part of clinker in Portland cement or a part of cement in concrete. One of the materials that satisfy requirements of sustainable development and, when added in appropriate shares, improves the properties of cement, mortars and concrete, is metakaolin (MK), a processed pozzolana. The main and widely used raw material for production of metakaolin is kaolin clay. MK is produced by calcination or "thermal activation" of kaolin clay. The possibilities for metakaolin production are strongly related to the characteristics of the used kaolin clay. The samples of domestic kaolin clay used in this study were provided by factories Kaolin, Valjevo, and Keramika, Mladenovac. Chemical composition, mineralogical composition and thermal properties of these samples were determined. Thermal analysis (simultaneous recording of TG, DTG and DTA signals) was carried out at the temperature range from 20 to 1200 degrees C. For both clays the results show that the loss of mass occurred in two stages. The dehydroxillation of kaolinite and formation of metakaolin occurred in the second stage. Minerals quartz and kaolinite are dominant in the clay Kaolin, Valjevo. Dehydroxillation of kaolinite and formation of metakaolin took place in the temperature range 350-800 degrees C. This clay does not have clearly distinct exothermic and endothermic peaks. Clay from Keramika, Mladenovac, has a higher content of the kaolinite mineral, i.e. 81.51%. The dehydroxillation of kaolinite and fori-nation of metakaolin occured in the temperature range 400-700 degrees C. This clay has two distinct endothermic peaks at 60 and 490 degrees C. All these results show that both clays can be used for production of metakaolin.",
publisher = "Savez hemijskih inženjera, Beograd",
journal = "Hemijska industrija",
title = "Research of possibilities for use domestic kaolin clays for production of metakaolin",
pages = "113-107",
number = "2",
volume = "63",
doi = "10.2298/HEMIND0902107M"
}
Mitrović, A., Komljenović, M. M.,& Ilić, B.. (2009). Research of possibilities for use domestic kaolin clays for production of metakaolin. in Hemijska industrija
Savez hemijskih inženjera, Beograd., 63(2), 107-113.
https://doi.org/10.2298/HEMIND0902107M
Mitrović A, Komljenović MM, Ilić B. Research of possibilities for use domestic kaolin clays for production of metakaolin. in Hemijska industrija. 2009;63(2):107-113.
doi:10.2298/HEMIND0902107M .
Mitrović, Aleksandra, Komljenović, Miroslav M., Ilić, Biljana, "Research of possibilities for use domestic kaolin clays for production of metakaolin" in Hemijska industrija, 63, no. 2 (2009):107-113,
https://doi.org/10.2298/HEMIND0902107M . .
5
5
7

Procedure of Conformity Assessment According to EN 459-1:2001 and EN 459-3:2001

Milinković, Dejana; Ilić, Biljana

(2008)

TY  - CONF
AU  - Milinković, Dejana
AU  - Ilić, Biljana
PY  - 2008
UR  - http://rims.institutims.rs/handle/123456789/569
C3  - Drugi internacionalni naučno-stručni skup Građevinarstvo-nauka i praksa, Zbornik radova, Žabljak
T1  - Procedure of Conformity Assessment According to EN 459-1:2001 and EN 459-3:2001
EP  - 756
SP  - 751
UR  - https://hdl.handle.net/21.15107/rcub_rims_569
ER  - 
@conference{
author = "Milinković, Dejana and Ilić, Biljana",
year = "2008",
journal = "Drugi internacionalni naučno-stručni skup Građevinarstvo-nauka i praksa, Zbornik radova, Žabljak",
title = "Procedure of Conformity Assessment According to EN 459-1:2001 and EN 459-3:2001",
pages = "756-751",
url = "https://hdl.handle.net/21.15107/rcub_rims_569"
}
Milinković, D.,& Ilić, B.. (2008). Procedure of Conformity Assessment According to EN 459-1:2001 and EN 459-3:2001. in Drugi internacionalni naučno-stručni skup Građevinarstvo-nauka i praksa, Zbornik radova, Žabljak, 751-756.
https://hdl.handle.net/21.15107/rcub_rims_569
Milinković D, Ilić B. Procedure of Conformity Assessment According to EN 459-1:2001 and EN 459-3:2001. in Drugi internacionalni naučno-stručni skup Građevinarstvo-nauka i praksa, Zbornik radova, Žabljak. 2008;:751-756.
https://hdl.handle.net/21.15107/rcub_rims_569 .
Milinković, Dejana, Ilić, Biljana, "Procedure of Conformity Assessment According to EN 459-1:2001 and EN 459-3:2001" in Drugi internacionalni naučno-stručni skup Građevinarstvo-nauka i praksa, Zbornik radova, Žabljak (2008):751-756,
https://hdl.handle.net/21.15107/rcub_rims_569 .

Fly Ash - Guidelines for Conformity Assessment According to EN 450-1:2005 and EN 450-2:2005

Ilić, Biljana; Milinković, Dejana

(2008)

TY  - CONF
AU  - Ilić, Biljana
AU  - Milinković, Dejana
PY  - 2008
UR  - http://rims.institutims.rs/handle/123456789/568
C3  - Drugi internacionalni naučno-stručni skup Građevinarstvo-nauka i praksa, Zbornik radova, Žabljak
T1  - Fly Ash - Guidelines for Conformity Assessment According to EN 450-1:2005 and EN 450-2:2005
EP  - 734
SP  - 729
UR  - https://hdl.handle.net/21.15107/rcub_rims_568
ER  - 
@conference{
author = "Ilić, Biljana and Milinković, Dejana",
year = "2008",
journal = "Drugi internacionalni naučno-stručni skup Građevinarstvo-nauka i praksa, Zbornik radova, Žabljak",
title = "Fly Ash - Guidelines for Conformity Assessment According to EN 450-1:2005 and EN 450-2:2005",
pages = "734-729",
url = "https://hdl.handle.net/21.15107/rcub_rims_568"
}
Ilić, B.,& Milinković, D.. (2008). Fly Ash - Guidelines for Conformity Assessment According to EN 450-1:2005 and EN 450-2:2005. in Drugi internacionalni naučno-stručni skup Građevinarstvo-nauka i praksa, Zbornik radova, Žabljak, 729-734.
https://hdl.handle.net/21.15107/rcub_rims_568
Ilić B, Milinković D. Fly Ash - Guidelines for Conformity Assessment According to EN 450-1:2005 and EN 450-2:2005. in Drugi internacionalni naučno-stručni skup Građevinarstvo-nauka i praksa, Zbornik radova, Žabljak. 2008;:729-734.
https://hdl.handle.net/21.15107/rcub_rims_568 .
Ilić, Biljana, Milinković, Dejana, "Fly Ash - Guidelines for Conformity Assessment According to EN 450-1:2005 and EN 450-2:2005" in Drugi internacionalni naučno-stručni skup Građevinarstvo-nauka i praksa, Zbornik radova, Žabljak (2008):729-734,
https://hdl.handle.net/21.15107/rcub_rims_568 .

Certification of factory production control for the concrete plants according to EN 206-1:2000

Milinković, Dejana; Ilić, Biljana; Janković, Ksenija

(2007)

TY  - CONF
AU  - Milinković, Dejana
AU  - Ilić, Biljana
AU  - Janković, Ksenija
PY  - 2007
UR  - http://rims.institutims.rs/handle/123456789/570
C3  - Proceedings of the 12th international symposium of MASE, Struga, knjiga 1
T1  - Certification of factory production control for the concrete plants according to EN 206-1:2000
EP  - 228
SP  - 223
UR  - https://hdl.handle.net/21.15107/rcub_rims_570
ER  - 
@conference{
author = "Milinković, Dejana and Ilić, Biljana and Janković, Ksenija",
year = "2007",
journal = "Proceedings of the 12th international symposium of MASE, Struga, knjiga 1",
title = "Certification of factory production control for the concrete plants according to EN 206-1:2000",
pages = "228-223",
url = "https://hdl.handle.net/21.15107/rcub_rims_570"
}
Milinković, D., Ilić, B.,& Janković, K.. (2007). Certification of factory production control for the concrete plants according to EN 206-1:2000. in Proceedings of the 12th international symposium of MASE, Struga, knjiga 1, 223-228.
https://hdl.handle.net/21.15107/rcub_rims_570
Milinković D, Ilić B, Janković K. Certification of factory production control for the concrete plants according to EN 206-1:2000. in Proceedings of the 12th international symposium of MASE, Struga, knjiga 1. 2007;:223-228.
https://hdl.handle.net/21.15107/rcub_rims_570 .
Milinković, Dejana, Ilić, Biljana, Janković, Ksenija, "Certification of factory production control for the concrete plants according to EN 206-1:2000" in Proceedings of the 12th international symposium of MASE, Struga, knjiga 1 (2007):223-228,
https://hdl.handle.net/21.15107/rcub_rims_570 .

Portland-limestone Cements: Physical and Mechanical Properties

Mitrović, Aleksandra; Đuričić, Rade; Ilić, Biljana; Milinković, Dejana; Miličić, Ljiljana

(2006)

TY  - CONF
AU  - Mitrović, Aleksandra
AU  - Đuričić, Rade
AU  - Ilić, Biljana
AU  - Milinković, Dejana
AU  - Miličić, Ljiljana
PY  - 2006
UR  - http://rims.institutims.rs/handle/123456789/572
C3  - Zbornik radova sa međunarodnog skupa, Žabljak, Crna Gora, knjiga 2
T1  - Portland-limestone Cements: Physical and Mechanical Properties
EP  - 568
SP  - 563
UR  - https://hdl.handle.net/21.15107/rcub_rims_572
ER  - 
@conference{
author = "Mitrović, Aleksandra and Đuričić, Rade and Ilić, Biljana and Milinković, Dejana and Miličić, Ljiljana",
year = "2006",
journal = "Zbornik radova sa međunarodnog skupa, Žabljak, Crna Gora, knjiga 2",
title = "Portland-limestone Cements: Physical and Mechanical Properties",
pages = "568-563",
url = "https://hdl.handle.net/21.15107/rcub_rims_572"
}
Mitrović, A., Đuričić, R., Ilić, B., Milinković, D.,& Miličić, L.. (2006). Portland-limestone Cements: Physical and Mechanical Properties. in Zbornik radova sa međunarodnog skupa, Žabljak, Crna Gora, knjiga 2, 563-568.
https://hdl.handle.net/21.15107/rcub_rims_572
Mitrović A, Đuričić R, Ilić B, Milinković D, Miličić L. Portland-limestone Cements: Physical and Mechanical Properties. in Zbornik radova sa međunarodnog skupa, Žabljak, Crna Gora, knjiga 2. 2006;:563-568.
https://hdl.handle.net/21.15107/rcub_rims_572 .
Mitrović, Aleksandra, Đuričić, Rade, Ilić, Biljana, Milinković, Dejana, Miličić, Ljiljana, "Portland-limestone Cements: Physical and Mechanical Properties" in Zbornik radova sa međunarodnog skupa, Žabljak, Crna Gora, knjiga 2 (2006):563-568,
https://hdl.handle.net/21.15107/rcub_rims_572 .

Metakaolin: nova generacija dopunskih cementnih materijala

Ilić, Biljana; Mitrović, Aleksandra; Đuričić, Rade; Radojević, Zagorka

(2006)

TY  - CONF
AU  - Ilić, Biljana
AU  - Mitrović, Aleksandra
AU  - Đuričić, Rade
AU  - Radojević, Zagorka
PY  - 2006
UR  - http://rims.institutims.rs/handle/123456789/571
C3  - Zbornik radova sa međunarodnog skupa, Žabljak, Crna Gora, knjiga 2
T1  - Metakaolin: nova generacija dopunskih cementnih materijala
EP  - 538
SP  - 533
UR  - https://hdl.handle.net/21.15107/rcub_rims_571
ER  - 
@conference{
author = "Ilić, Biljana and Mitrović, Aleksandra and Đuričić, Rade and Radojević, Zagorka",
year = "2006",
journal = "Zbornik radova sa međunarodnog skupa, Žabljak, Crna Gora, knjiga 2",
title = "Metakaolin: nova generacija dopunskih cementnih materijala",
pages = "538-533",
url = "https://hdl.handle.net/21.15107/rcub_rims_571"
}
Ilić, B., Mitrović, A., Đuričić, R.,& Radojević, Z.. (2006). Metakaolin: nova generacija dopunskih cementnih materijala. in Zbornik radova sa međunarodnog skupa, Žabljak, Crna Gora, knjiga 2, 533-538.
https://hdl.handle.net/21.15107/rcub_rims_571
Ilić B, Mitrović A, Đuričić R, Radojević Z. Metakaolin: nova generacija dopunskih cementnih materijala. in Zbornik radova sa međunarodnog skupa, Žabljak, Crna Gora, knjiga 2. 2006;:533-538.
https://hdl.handle.net/21.15107/rcub_rims_571 .
Ilić, Biljana, Mitrović, Aleksandra, Đuričić, Rade, Radojević, Zagorka, "Metakaolin: nova generacija dopunskih cementnih materijala" in Zbornik radova sa međunarodnog skupa, Žabljak, Crna Gora, knjiga 2 (2006):533-538,
https://hdl.handle.net/21.15107/rcub_rims_571 .

Metakaolin - nova generacija dopunskih cementnih materijala

Mitrović, Aleksandra; Đuričić, Rade; Ilić, Biljana; Živanović, Branislav

(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd, 2005)

TY  - JOUR
AU  - Mitrović, Aleksandra
AU  - Đuričić, Rade
AU  - Ilić, Biljana
AU  - Živanović, Branislav
PY  - 2005
UR  - http://rims.institutims.rs/handle/123456789/35
AB  - Metakaolin (MK) je termički aktiviran alumino-silikatni materijal visoke pucolanske aktivnosti. Dodatkom mata-kaolina cementu poboljšava se kvalitet koji se manifestuje kroz: povećanje čvrstoće, skraćenje vremena vezivanja (da li je ova karakteristka prednost ili ne zavisi od primene cementa) sniženje autogenog skupljanja, kontrolu alkalno-silikatne reakcije, smanjenje rizika od korozije čelika izazvane hloridima i poboljšanje trajnosti betona. Zbog toga, metakaolin postaje značajan dopunski materijal za proizvodnju betona visokih performansi.
AB  - Metakaolin (MK) is thermally activated alumino-silicate material with high pozzolanic activity. MK is quite useful in improving concrete quality, such as enhancing strength, shortening setting time (whether this characteristic is advantageous depends on the application of cements), decreasing autogenous shrinkage, controlling alkali aggregate reaction, reducing risk of chloride-induced corrosion of embedded steel and improving the durability of concrete. Therefore, MK is a promising supplementary material for manufacturing high-performance concrete.
PB  - Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd
T2  - Materijali i konstrukcije
T1  - Metakaolin - nova generacija dopunskih cementnih materijala
T1  - Metakaolin: A new generation of supplementary cementations' materials
EP  - 54
IS  - 3
SP  - 48
VL  - 48
UR  - https://hdl.handle.net/21.15107/rcub_rims_35
ER  - 
@article{
author = "Mitrović, Aleksandra and Đuričić, Rade and Ilić, Biljana and Živanović, Branislav",
year = "2005",
abstract = "Metakaolin (MK) je termički aktiviran alumino-silikatni materijal visoke pucolanske aktivnosti. Dodatkom mata-kaolina cementu poboljšava se kvalitet koji se manifestuje kroz: povećanje čvrstoće, skraćenje vremena vezivanja (da li je ova karakteristka prednost ili ne zavisi od primene cementa) sniženje autogenog skupljanja, kontrolu alkalno-silikatne reakcije, smanjenje rizika od korozije čelika izazvane hloridima i poboljšanje trajnosti betona. Zbog toga, metakaolin postaje značajan dopunski materijal za proizvodnju betona visokih performansi., Metakaolin (MK) is thermally activated alumino-silicate material with high pozzolanic activity. MK is quite useful in improving concrete quality, such as enhancing strength, shortening setting time (whether this characteristic is advantageous depends on the application of cements), decreasing autogenous shrinkage, controlling alkali aggregate reaction, reducing risk of chloride-induced corrosion of embedded steel and improving the durability of concrete. Therefore, MK is a promising supplementary material for manufacturing high-performance concrete.",
publisher = "Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd",
journal = "Materijali i konstrukcije",
title = "Metakaolin - nova generacija dopunskih cementnih materijala, Metakaolin: A new generation of supplementary cementations' materials",
pages = "54-48",
number = "3",
volume = "48",
url = "https://hdl.handle.net/21.15107/rcub_rims_35"
}
Mitrović, A., Đuričić, R., Ilić, B.,& Živanović, B.. (2005). Metakaolin - nova generacija dopunskih cementnih materijala. in Materijali i konstrukcije
Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd., 48(3), 48-54.
https://hdl.handle.net/21.15107/rcub_rims_35
Mitrović A, Đuričić R, Ilić B, Živanović B. Metakaolin - nova generacija dopunskih cementnih materijala. in Materijali i konstrukcije. 2005;48(3):48-54.
https://hdl.handle.net/21.15107/rcub_rims_35 .
Mitrović, Aleksandra, Đuričić, Rade, Ilić, Biljana, Živanović, Branislav, "Metakaolin - nova generacija dopunskih cementnih materijala" in Materijali i konstrukcije, 48, no. 3 (2005):48-54,
https://hdl.handle.net/21.15107/rcub_rims_35 .