TY  - JOUR
AU  - Pavlović, Marko
AU  - Dojčinović, Marina
AU  - Nikolić, Jasmina
AU  - Terzić, Anja
AU  - Pavićević, Vladimir
AU  - Drmanić, Saša
AU  - Kurtanović, Enita
PY  - 2024
UR  - http://rims.institutims.rs/handle/123456789/893
AB  - In this study, pyrophyllite was used for the first time in the composition of protective refractory coatings together with supplementary waste resources. The proposed refractory coatings are applicable for metallic and non-metallic structures, with the option of using them to protect machinery components in the chemical industry, metallurgy, and mining. Given that pyrophyllite has a low hardness, the goal was to improve the coating's resistance to cavitation erosion by adding 20 wt.% of hard refractory materials, i.e., crushed and micronized waste bricks based on mullite and corundum, respectively. Previous studies have demonstrated that protective coatings using a pyrophyllite filler have refractory qualities but insufficient resistance to cavitation erosion. As a result, the composition of refractory coatings, the preparation techniques, and the coating manufacturing process were altered. This study presents a simple method for combining conventional coatings made of refractory fillers (primary resource: pyrophyllite) with waste materials (mullite brick and corundum brick) used as reinforcement in protective refractory coatings for metal and non-metal structural elements that are highly resistant to cavitation erosion.
T2  - Chemical Industry and Chemical Engineering Quarterly 2024 On Line-First Issue 00
T1  - Application of waste raw materials as a reinforcement for protective coatings based on pyrophyllite
EP  - 29
SP  - 29
DO  - 10.2298/CICEQ240410029P
ER  - 

@article{
author = "Pavlović, Marko and Dojčinović, Marina and Nikolić, Jasmina and Terzić, Anja and Pavićević, Vladimir and Drmanić, Saša and Kurtanović, Enita",
year = "2024",
abstract = "In this study, pyrophyllite was used for the first time in the composition of protective refractory coatings together with supplementary waste resources. The proposed refractory coatings are applicable for metallic and non-metallic structures, with the option of using them to protect machinery components in the chemical industry, metallurgy, and mining. Given that pyrophyllite has a low hardness, the goal was to improve the coating's resistance to cavitation erosion by adding 20 wt.% of hard refractory materials, i.e., crushed and micronized waste bricks based on mullite and corundum, respectively. Previous studies have demonstrated that protective coatings using a pyrophyllite filler have refractory qualities but insufficient resistance to cavitation erosion. As a result, the composition of refractory coatings, the preparation techniques, and the coating manufacturing process were altered. This study presents a simple method for combining conventional coatings made of refractory fillers (primary resource: pyrophyllite) with waste materials (mullite brick and corundum brick) used as reinforcement in protective refractory coatings for metal and non-metal structural elements that are highly resistant to cavitation erosion.",
journal = "Chemical Industry and Chemical Engineering Quarterly 2024 On Line-First Issue 00",
title = "Application of waste raw materials as a reinforcement for protective coatings based on pyrophyllite",
pages = "29-29",
doi = "10.2298/CICEQ240410029P"
}

Pavlović, M., Dojčinović, M., Nikolić, J., Terzić, A., Pavićević, V., Drmanić, S.,& Kurtanović, E.. (2024). Application of waste raw materials as a reinforcement for protective coatings based on pyrophyllite. in Chemical Industry and Chemical Engineering Quarterly 2024 On Line-First Issue 00, 29-29.
https://doi.org/10.2298/CICEQ240410029P

Pavlović M, Dojčinović M, Nikolić J, Terzić A, Pavićević V, Drmanić S, Kurtanović E. Application of waste raw materials as a reinforcement for protective coatings based on pyrophyllite. in Chemical Industry and Chemical Engineering Quarterly 2024 On Line-First Issue 00. 2024;:29-29.
doi:10.2298/CICEQ240410029P .

Pavlović, Marko, Dojčinović, Marina, Nikolić, Jasmina, Terzić, Anja, Pavićević, Vladimir, Drmanić, Saša, Kurtanović, Enita, "Application of waste raw materials as a reinforcement for protective coatings based on pyrophyllite" in Chemical Industry and Chemical Engineering Quarterly 2024 On Line-First Issue 00 (2024):29-29,
https://doi.org/10.2298/CICEQ240410029P . .

TY  - JOUR
AU  - Pavlović, Marko
AU  - Terzić, Anja
AU  - Dojčinović, Marina
AU  - Radulović, Dragan
PY  - 2024
UR  - http://rims.institutims.rs/handle/123456789/817
AB  - The performance of thermo-insulation rendering mortars with alternations in ratios of powdered cordierite and talc was examined. The goal was to confirm that recycled kilnware cordierite can be reapplied in the mortar design without significant deterioration in performance in comparison with OPC mortar. Differential thermal analysis was employed for examining thermally induced reactions. The cavitation erosion, in testing sequences ranging from 30 to 120 minutes, was used to assess the compactness of the mortar structure. The physico-mechanical properties of experimental mortars were investigated. The morphologies of the mortar tablets upon cavitation were studied using a scanning electron microscope. It was established that cordierite and talc filler in amounts up to 20% enhance microstructural packing and mechanical strengths due to improved cementation and therefore contribute to cavitation erosion resistance. Higher amounts of talc cause structural degradation and mass loss during cavitation tests. Reducing manufacturing costs, energy consumption, and greenhouse gas emissions are the main objectives of the production of this waste-based construction composite, as the reuse of waste materials can help achieve a number of Sustainable Development Goals.
PB  - Association for ETRAN Society
T2  - Science of Sintering OnLine-First Issue 00
T1  - Developing thermal insulation cement-based mortars with recycled aggregate in accordance with net zero principles
DO  - 10.2298/SOS231215002P
ER  - 

@article{
author = "Pavlović, Marko and Terzić, Anja and Dojčinović, Marina and Radulović, Dragan",
year = "2024",
abstract = "The performance of thermo-insulation rendering mortars with alternations in ratios of powdered cordierite and talc was examined. The goal was to confirm that recycled kilnware cordierite can be reapplied in the mortar design without significant deterioration in performance in comparison with OPC mortar. Differential thermal analysis was employed for examining thermally induced reactions. The cavitation erosion, in testing sequences ranging from 30 to 120 minutes, was used to assess the compactness of the mortar structure. The physico-mechanical properties of experimental mortars were investigated. The morphologies of the mortar tablets upon cavitation were studied using a scanning electron microscope. It was established that cordierite and talc filler in amounts up to 20% enhance microstructural packing and mechanical strengths due to improved cementation and therefore contribute to cavitation erosion resistance. Higher amounts of talc cause structural degradation and mass loss during cavitation tests. Reducing manufacturing costs, energy consumption, and greenhouse gas emissions are the main objectives of the production of this waste-based construction composite, as the reuse of waste materials can help achieve a number of Sustainable Development Goals.",
publisher = "Association for ETRAN Society",
journal = "Science of Sintering OnLine-First Issue 00",
title = "Developing thermal insulation cement-based mortars with recycled aggregate in accordance with net zero principles",
doi = "10.2298/SOS231215002P"
}

Pavlović, M., Terzić, A., Dojčinović, M.,& Radulović, D.. (2024). Developing thermal insulation cement-based mortars with recycled aggregate in accordance with net zero principles. in Science of Sintering OnLine-First Issue 00
Association for ETRAN Society..
https://doi.org/10.2298/SOS231215002P

Pavlović M, Terzić A, Dojčinović M, Radulović D. Developing thermal insulation cement-based mortars with recycled aggregate in accordance with net zero principles. in Science of Sintering OnLine-First Issue 00. 2024;.
doi:10.2298/SOS231215002P .

Pavlović, Marko, Terzić, Anja, Dojčinović, Marina, Radulović, Dragan, "Developing thermal insulation cement-based mortars with recycled aggregate in accordance with net zero principles" in Science of Sintering OnLine-First Issue 00 (2024),
https://doi.org/10.2298/SOS231215002P . .

TY  - CONF
AU  - Pavlović, Marko
AU  - Dojčinović, Marina
AU  - Terzić, Anja
AU  - Grigorova, Irena
AU  - Andrić, Ljubiša
PY  - 2020
UR  - http://rims.institutims.rs/handle/123456789/901
AB  - The cavitation erosion resistance of the basalt samples from Vrelo, Kopaonik deposit was investigated. The cavitation erosion test was performed using an ultrasonic vibratory cavitation testing method in accordance to the ASTM G32 standard. To measure the cavitation resistance, a change in the sample mass in function of the cavitation time was monitored. The alternations of the samples’ surface morphology with the passing time were analyzed by scanning electron microscopy. The level of the surface degradation was quantified using image analysis software. The results indicate that basalt posses a good cavitation resistance, which implicates that this raw material can be utilized in extreme exploitation environment.
PB  - Univesity of Montenegro, Faculty of Civil Engineering, Podgorica, Montenegro, Kolašin, Montenegro
C3  - The 7th International Conference Civil Engineering – Science and Practice, Kolašin, Montenegro, 10-14 March 2020
T1  - Cavitation erosion resistance of basalt
EP  - 1038
SP  - 1031
ER  - 

@conference{
author = "Pavlović, Marko and Dojčinović, Marina and Terzić, Anja and Grigorova, Irena and Andrić, Ljubiša",
year = "2020",
abstract = "The cavitation erosion resistance of the basalt samples from Vrelo, Kopaonik deposit was investigated. The cavitation erosion test was performed using an ultrasonic vibratory cavitation testing method in accordance to the ASTM G32 standard. To measure the cavitation resistance, a change in the sample mass in function of the cavitation time was monitored. The alternations of the samples’ surface morphology with the passing time were analyzed by scanning electron microscopy. The level of the surface degradation was quantified using image analysis software. The results indicate that basalt posses a good cavitation resistance, which implicates that this raw material can be utilized in extreme exploitation environment.",
publisher = "Univesity of Montenegro, Faculty of Civil Engineering, Podgorica, Montenegro, Kolašin, Montenegro",
journal = "The 7th International Conference Civil Engineering – Science and Practice, Kolašin, Montenegro, 10-14 March 2020",
title = "Cavitation erosion resistance of basalt",
pages = "1038-1031"
}

Pavlović, M., Dojčinović, M., Terzić, A., Grigorova, I.,& Andrić, L.. (2020). Cavitation erosion resistance of basalt. in The 7th International Conference Civil Engineering – Science and Practice, Kolašin, Montenegro, 10-14 March 2020
Univesity of Montenegro, Faculty of Civil Engineering, Podgorica, Montenegro, Kolašin, Montenegro., 1031-1038.

Pavlović M, Dojčinović M, Terzić A, Grigorova I, Andrić L. Cavitation erosion resistance of basalt. in The 7th International Conference Civil Engineering – Science and Practice, Kolašin, Montenegro, 10-14 March 2020. 2020;:1031-1038..

Pavlović, Marko, Dojčinović, Marina, Terzić, Anja, Grigorova, Irena, Andrić, Ljubiša, "Cavitation erosion resistance of basalt" in The 7th International Conference Civil Engineering – Science and Practice, Kolašin, Montenegro, 10-14 March 2020 (2020):1031-1038.

TY  - JOUR
AU  - Aćimović-Pavlović, Zagorka
AU  - Terzić, Anja
AU  - Andrić, Ljubiša
AU  - Pavlović, Marko
PY  - 2015
UR  - http://rims.institutims.rs/handle/123456789/277
AB  - This study presents the results of an investigation of high-temperature materials refractory coatings based on different refractory fillers including talc, cordierite, zircon and mullite applied in the lost-foam casting process. Design and optimization of a coating composition with controlled rheological properties and synthesis were achieved by applying different coating components, suspension agents and fillers and by altering the coating-production procedure. A morphological and microstructural analysis of the fillers was carried out with scanning electron microscopy. An X-ray diffraction analysis was applied to determine and monitor the phase-composition changes of the refractory fillers. The particle size and shape were assessed with the PC software application package OZARIA 2.5. To assess the effects of the applications of individual refractory coatings, a detailed investigation of the structural and mechanical properties of the mouldings obtained was performed. Highlight was placed on revealing and analyzing surface and volume defects present on the mouldings. Radiographic moulding tests were carried out with an X-ray device, SAIFORT type-S200. The attained results are essential for the synthesis of the refractory coatings based on high-temperature fillers and their applications in the lost-foam casting process for manufacturing the mouldings with in-advance-set properties.
PB  - Inst Za Kovinske Materiale I In Tehnologie, Ljubjana
T2  - Materiali in tehnologije
T1  - Comparison of refractory coatings based on talc, cordierite, zircon and mullite fillers for lost-foam casting
EP  - 164
IS  - 1
SP  - 157
VL  - 49
UR  - https://hdl.handle.net/21.15107/rcub_rims_277
ER  - 

@article{
author = "Aćimović-Pavlović, Zagorka and Terzić, Anja and Andrić, Ljubiša and Pavlović, Marko",
year = "2015",
abstract = "This study presents the results of an investigation of high-temperature materials refractory coatings based on different refractory fillers including talc, cordierite, zircon and mullite applied in the lost-foam casting process. Design and optimization of a coating composition with controlled rheological properties and synthesis were achieved by applying different coating components, suspension agents and fillers and by altering the coating-production procedure. A morphological and microstructural analysis of the fillers was carried out with scanning electron microscopy. An X-ray diffraction analysis was applied to determine and monitor the phase-composition changes of the refractory fillers. The particle size and shape were assessed with the PC software application package OZARIA 2.5. To assess the effects of the applications of individual refractory coatings, a detailed investigation of the structural and mechanical properties of the mouldings obtained was performed. Highlight was placed on revealing and analyzing surface and volume defects present on the mouldings. Radiographic moulding tests were carried out with an X-ray device, SAIFORT type-S200. The attained results are essential for the synthesis of the refractory coatings based on high-temperature fillers and their applications in the lost-foam casting process for manufacturing the mouldings with in-advance-set properties.",
publisher = "Inst Za Kovinske Materiale I In Tehnologie, Ljubjana",
journal = "Materiali in tehnologije",
title = "Comparison of refractory coatings based on talc, cordierite, zircon and mullite fillers for lost-foam casting",
pages = "164-157",
number = "1",
volume = "49",
url = "https://hdl.handle.net/21.15107/rcub_rims_277"
}

Aćimović-Pavlović, Z., Terzić, A., Andrić, L.,& Pavlović, M.. (2015). Comparison of refractory coatings based on talc, cordierite, zircon and mullite fillers for lost-foam casting. in Materiali in tehnologije
Inst Za Kovinske Materiale I In Tehnologie, Ljubjana., 49(1), 157-164.
https://hdl.handle.net/21.15107/rcub_rims_277

Aćimović-Pavlović Z, Terzić A, Andrić L, Pavlović M. Comparison of refractory coatings based on talc, cordierite, zircon and mullite fillers for lost-foam casting. in Materiali in tehnologije. 2015;49(1):157-164.
https://hdl.handle.net/21.15107/rcub_rims_277 .

Aćimović-Pavlović, Zagorka, Terzić, Anja, Andrić, Ljubiša, Pavlović, Marko, "Comparison of refractory coatings based on talc, cordierite, zircon and mullite fillers for lost-foam casting" in Materiali in tehnologije, 49, no. 1 (2015):157-164,
https://hdl.handle.net/21.15107/rcub_rims_277 .

TY  - JOUR
AU  - Aćimović, Zagorka
AU  - Terzić, Anja
AU  - Andrić, Ljubiša
AU  - Stojanović, Vera
AU  - Pavlović, Marko
PY  - 2014
UR  - http://rims.institutims.rs/handle/123456789/226
AB  - Rezultati ispitivanja uticaja uklanjanja gasa iz tečnog metala na kvalitet livenih elemenata od aluminijum-magnezijum legure, a na bazi recikliranih materijala su dati ovom radu. Dobijeni rezultati praktično definišu proceduru livenja kojom se može umanjiti prisustvo uključaka i gasova u livenim elementima, što je osnovni preduslov za postizanje projektovanog kvaliteta livenog materijala i krajnjih proizvoda. Ispitivani su kinetika i mehanizmi procesa degasifikacije, zatim su definisani parametri procesa degasifikacije, i na posletku primenjeni novi agensi za degasifikaciju legura. Rezultati ovog ispitivanja su značajni sa ekološkog aspekta i sa aspekta održivog razvoja proizvodnje livenih elemenata od aluminijumskih legura.
AB  - The investigation results of gas removal from smelted metal and the effect on performances of aluminium-magnesium alloy cast elements are presented in this paper. The investigated alloy is based on recycled material. The obtained results define the specific procedure which is used for removal and reduction the presence of inclusions of various types in the cast elements, which is the basic step in achieving the designed quality of cast material and quality final products. Kinetics and mechanisms of degasification process were investigated, parameters of degasification procedures were defined, and the new agents for degasification of alloy cast were implemented. The results of this investigation are significant from the aspect of sustainable development the production of cast elements of aluminium alloys.
PB  - Institut za rudarstvo i metalurgiju, Bor
T2  - Mining and Metallurgy Engineering Bor
T1  - Greške na elementima od aluminijum-magnezijum legure - uticaj uključaka
T1  - The flaws of aluminium-magnesium alloy elements: Influence of inclusions
EP  - 152
IS  - 1
SP  - 137
DO  - 10.5937/mmeb1401137A
ER  - 

@article{
author = "Aćimović, Zagorka and Terzić, Anja and Andrić, Ljubiša and Stojanović, Vera and Pavlović, Marko",
year = "2014",
abstract = "Rezultati ispitivanja uticaja uklanjanja gasa iz tečnog metala na kvalitet livenih elemenata od aluminijum-magnezijum legure, a na bazi recikliranih materijala su dati ovom radu. Dobijeni rezultati praktično definišu proceduru livenja kojom se može umanjiti prisustvo uključaka i gasova u livenim elementima, što je osnovni preduslov za postizanje projektovanog kvaliteta livenog materijala i krajnjih proizvoda. Ispitivani su kinetika i mehanizmi procesa degasifikacije, zatim su definisani parametri procesa degasifikacije, i na posletku primenjeni novi agensi za degasifikaciju legura. Rezultati ovog ispitivanja su značajni sa ekološkog aspekta i sa aspekta održivog razvoja proizvodnje livenih elemenata od aluminijumskih legura., The investigation results of gas removal from smelted metal and the effect on performances of aluminium-magnesium alloy cast elements are presented in this paper. The investigated alloy is based on recycled material. The obtained results define the specific procedure which is used for removal and reduction the presence of inclusions of various types in the cast elements, which is the basic step in achieving the designed quality of cast material and quality final products. Kinetics and mechanisms of degasification process were investigated, parameters of degasification procedures were defined, and the new agents for degasification of alloy cast were implemented. The results of this investigation are significant from the aspect of sustainable development the production of cast elements of aluminium alloys.",
publisher = "Institut za rudarstvo i metalurgiju, Bor",
journal = "Mining and Metallurgy Engineering Bor",
title = "Greške na elementima od aluminijum-magnezijum legure - uticaj uključaka, The flaws of aluminium-magnesium alloy elements: Influence of inclusions",
pages = "152-137",
number = "1",
doi = "10.5937/mmeb1401137A"
}

Aćimović, Z., Terzić, A., Andrić, L., Stojanović, V.,& Pavlović, M.. (2014). Greške na elementima od aluminijum-magnezijum legure - uticaj uključaka. in Mining and Metallurgy Engineering Bor
Institut za rudarstvo i metalurgiju, Bor.(1), 137-152.
https://doi.org/10.5937/mmeb1401137A

Aćimović Z, Terzić A, Andrić L, Stojanović V, Pavlović M. Greške na elementima od aluminijum-magnezijum legure - uticaj uključaka. in Mining and Metallurgy Engineering Bor. 2014;(1):137-152.
doi:10.5937/mmeb1401137A .

Aćimović, Zagorka, Terzić, Anja, Andrić, Ljubiša, Stojanović, Vera, Pavlović, Marko, "Greške na elementima od aluminijum-magnezijum legure - uticaj uključaka" in Mining and Metallurgy Engineering Bor, no. 1 (2014):137-152,
https://doi.org/10.5937/mmeb1401137A . .

TY  - JOUR
AU  - Aćimović, Zagorka
AU  - Terzić, Anja
AU  - Andrić, Ljubiša
AU  - Pavlović, Ljubica
AU  - Pavlović, Marko
PY  - 2013
UR  - http://rims.institutims.rs/handle/123456789/221
AB  - This work investigated the possibility of developing new chromite-based refractory coatings for hot metal casting applications. The coating composition and rheological properties were optimized by careful choice of binding agents and addition of a suspension maintenance agent in the coating. Different solvents (water and isopropyl alcohol) and casting methods were used in the tests. Chromite was used as refractory filler in both the water- And alcohol-based coating compositions. The chromite was examined by X-ray diffraction analysis and scanning electron microscopy. The chromite shape and grain size were analysed visually with the aid of the OZARIA 2.5 PC image analysis package. Test samples were cast using sand moulds and by the method of expandable patterns using a polymer model, also known as the "lost foam" casting process. The investigation demonstrated that water- And alcohol-based coatings have positive influence on the surface quality, structural and mechanical properties of alloy castings made with both casting processes.
PB  - Verlag Schmidt GmbH
T2  - InterCeram: International Ceramic Review
T1  - Application of chromite in the production of refractory coatings
EP  - 293
IS  - 4
SP  - 290
VL  - 62
UR  - https://hdl.handle.net/21.15107/rcub_rims_221
ER  - 

@article{
author = "Aćimović, Zagorka and Terzić, Anja and Andrić, Ljubiša and Pavlović, Ljubica and Pavlović, Marko",
year = "2013",
abstract = "This work investigated the possibility of developing new chromite-based refractory coatings for hot metal casting applications. The coating composition and rheological properties were optimized by careful choice of binding agents and addition of a suspension maintenance agent in the coating. Different solvents (water and isopropyl alcohol) and casting methods were used in the tests. Chromite was used as refractory filler in both the water- And alcohol-based coating compositions. The chromite was examined by X-ray diffraction analysis and scanning electron microscopy. The chromite shape and grain size were analysed visually with the aid of the OZARIA 2.5 PC image analysis package. Test samples were cast using sand moulds and by the method of expandable patterns using a polymer model, also known as the "lost foam" casting process. The investigation demonstrated that water- And alcohol-based coatings have positive influence on the surface quality, structural and mechanical properties of alloy castings made with both casting processes.",
publisher = "Verlag Schmidt GmbH",
journal = "InterCeram: International Ceramic Review",
title = "Application of chromite in the production of refractory coatings",
pages = "293-290",
number = "4",
volume = "62",
url = "https://hdl.handle.net/21.15107/rcub_rims_221"
}

Aćimović, Z., Terzić, A., Andrić, L., Pavlović, L.,& Pavlović, M.. (2013). Application of chromite in the production of refractory coatings. in InterCeram: International Ceramic Review
Verlag Schmidt GmbH., 62(4), 290-293.
https://hdl.handle.net/21.15107/rcub_rims_221

Aćimović Z, Terzić A, Andrić L, Pavlović L, Pavlović M. Application of chromite in the production of refractory coatings. in InterCeram: International Ceramic Review. 2013;62(4):290-293.
https://hdl.handle.net/21.15107/rcub_rims_221 .

Aćimović, Zagorka, Terzić, Anja, Andrić, Ljubiša, Pavlović, Ljubica, Pavlović, Marko, "Application of chromite in the production of refractory coatings" in InterCeram: International Ceramic Review, 62, no. 4 (2013):290-293,
https://hdl.handle.net/21.15107/rcub_rims_221 .

TY  - JOUR
AU  - Aćimović, Zagorka
AU  - Terzić, Anja
AU  - Andrić, Ljubiša
AU  - Pavlović, Ljubica
AU  - Pavlović, Marko
PY  - 2013
UR  - http://rims.institutims.rs/handle/123456789/214
AB  - Various possibilities for developing new mullite-based refractory linings that can be applied in a casting process were investigated and are presented in this paper. An optimization of the refractory-lining composition design with the controlled rheological properties was achieved by applying different lining components and altering the lining-production procedure. Mullite was used as a high-temperature filler. A mullite sample was tested with the following methods: X-ray diffraction analysis, differential thermal analysis and scanning-electron microscopy. The particle shape and particle size were analyzed with the program package for an image analysis called OZARIA 2.5. It was proved that an application of this type of lining has a positive effect on the surface quality, structural and mechanical properties of the castings of Fe-C alloys obtained by casting into sand molds, according to the method of expandable patterns (the EPC casting process).
PB  - Inst Za Kovinske Materiale I In Tehnologie, Ljubjana
T2  - Materiali in tehnologije
T1  - Synthesizing a new type of mullite lining
EP  - 780
IS  - 6
SP  - 777
VL  - 47
UR  - https://hdl.handle.net/21.15107/rcub_rims_214
ER  - 

@article{
author = "Aćimović, Zagorka and Terzić, Anja and Andrić, Ljubiša and Pavlović, Ljubica and Pavlović, Marko",
year = "2013",
abstract = "Various possibilities for developing new mullite-based refractory linings that can be applied in a casting process were investigated and are presented in this paper. An optimization of the refractory-lining composition design with the controlled rheological properties was achieved by applying different lining components and altering the lining-production procedure. Mullite was used as a high-temperature filler. A mullite sample was tested with the following methods: X-ray diffraction analysis, differential thermal analysis and scanning-electron microscopy. The particle shape and particle size were analyzed with the program package for an image analysis called OZARIA 2.5. It was proved that an application of this type of lining has a positive effect on the surface quality, structural and mechanical properties of the castings of Fe-C alloys obtained by casting into sand molds, according to the method of expandable patterns (the EPC casting process).",
publisher = "Inst Za Kovinske Materiale I In Tehnologie, Ljubjana",
journal = "Materiali in tehnologije",
title = "Synthesizing a new type of mullite lining",
pages = "780-777",
number = "6",
volume = "47",
url = "https://hdl.handle.net/21.15107/rcub_rims_214"
}

Aćimović, Z., Terzić, A., Andrić, L., Pavlović, L.,& Pavlović, M.. (2013). Synthesizing a new type of mullite lining. in Materiali in tehnologije
Inst Za Kovinske Materiale I In Tehnologie, Ljubjana., 47(6), 777-780.
https://hdl.handle.net/21.15107/rcub_rims_214

Aćimović Z, Terzić A, Andrić L, Pavlović L, Pavlović M. Synthesizing a new type of mullite lining. in Materiali in tehnologije. 2013;47(6):777-780.
https://hdl.handle.net/21.15107/rcub_rims_214 .

Aćimović, Zagorka, Terzić, Anja, Andrić, Ljubiša, Pavlović, Ljubica, Pavlović, Marko, "Synthesizing a new type of mullite lining" in Materiali in tehnologije, 47, no. 6 (2013):777-780,
https://hdl.handle.net/21.15107/rcub_rims_214 .

TY  - JOUR
AU  - Tripković, S.
AU  - Aćimović-Pavlović, Zagorka
AU  - Terzić, Anja
AU  - Pavlović, Ljubica
AU  - Pavlović, Marko
PY  - 2013
UR  - http://rims.institutims.rs/handle/123456789/210
AB  - The results of the investigation of the influence of different modifiers (sodium, phosphorus, antimony and strontium) on the quality of AlSi12CuMgNi and AlSi18CuMgNi alloys, which are used for the production of pistons, are presented in this paper. The effects of these elements were investigated with reference to their mechanical and structural properties measured at ambient and elevated temperatures and service performance of the piston. Since strontium and antimony modified alloys are not considered as standardised piston alloys, the research results were compared with the results of standard phosphor and sodium modified alloys normally used at globally renowned piston manufacturer: Mahle, KS.
PB  - Maney Publishing, Leeds
T2  - International Journal of Cast Metals Research
T1  - Influence of modifying methods on quality of eutectic and hypereutectic silumine for diesel engine pistons
EP  - 212
IS  - 4
SP  - 209
VL  - 26
DO  - 10.1179/1743133613Y.0000000054
ER  - 

@article{
author = "Tripković, S. and Aćimović-Pavlović, Zagorka and Terzić, Anja and Pavlović, Ljubica and Pavlović, Marko",
year = "2013",
abstract = "The results of the investigation of the influence of different modifiers (sodium, phosphorus, antimony and strontium) on the quality of AlSi12CuMgNi and AlSi18CuMgNi alloys, which are used for the production of pistons, are presented in this paper. The effects of these elements were investigated with reference to their mechanical and structural properties measured at ambient and elevated temperatures and service performance of the piston. Since strontium and antimony modified alloys are not considered as standardised piston alloys, the research results were compared with the results of standard phosphor and sodium modified alloys normally used at globally renowned piston manufacturer: Mahle, KS.",
publisher = "Maney Publishing, Leeds",
journal = "International Journal of Cast Metals Research",
title = "Influence of modifying methods on quality of eutectic and hypereutectic silumine for diesel engine pistons",
pages = "212-209",
number = "4",
volume = "26",
doi = "10.1179/1743133613Y.0000000054"
}

Tripković, S., Aćimović-Pavlović, Z., Terzić, A., Pavlović, L.,& Pavlović, M.. (2013). Influence of modifying methods on quality of eutectic and hypereutectic silumine for diesel engine pistons. in International Journal of Cast Metals Research
Maney Publishing, Leeds., 26(4), 209-212.
https://doi.org/10.1179/1743133613Y.0000000054

Tripković S, Aćimović-Pavlović Z, Terzić A, Pavlović L, Pavlović M. Influence of modifying methods on quality of eutectic and hypereutectic silumine for diesel engine pistons. in International Journal of Cast Metals Research. 2013;26(4):209-212.
doi:10.1179/1743133613Y.0000000054 .

Tripković, S., Aćimović-Pavlović, Zagorka, Terzić, Anja, Pavlović, Ljubica, Pavlović, Marko, "Influence of modifying methods on quality of eutectic and hypereutectic silumine for diesel engine pistons" in International Journal of Cast Metals Research, 26, no. 4 (2013):209-212,
https://doi.org/10.1179/1743133613Y.0000000054 . .