TY  - CONF
AU  - Ćosić, Mladen
AU  - Šušić, Nenad
AU  - Prica, Marko
AU  - Božović, Nikola
AU  - Đoković, Ksenija
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/672
AB  - U radu je prikazan sadržaj predloženog dokumenta Elaborata ispitivanja šipova i jasnije
su razjašnjene aktivnosti koje su obuhvaćene ovim dokumentom. Na primeru objekta Ušće 2
demonstrirana je primena jednog dela rešenja o ispitivanju šipova, a što bi se našlo u samom
elaboratu. Analizirane su količine (obim) ispitivanja šipova po tipovima testova i analizirane su
aktivnosti u okviru svakog pojedinačnog testa. Naglašeno je da je potrebna bolja saradnja na
relaciji projektant, izvođač i nadzora prema ispitivaču šipova.
C3  - GEOTEHNIČKI ASPEKTI GRAĐEVINARSTVA I ZEMLJOTRESNO INŽENJERSTVO - Vrnjačka Banja
T1  - Analiza modela upravljanja kvalitetom ispitivanja šipova
EP  - 581
SP  - 571
UR  - https://hdl.handle.net/21.15107/rcub_rims_672
ER  - 

@conference{
author = "Ćosić, Mladen and Šušić, Nenad and Prica, Marko and Božović, Nikola and Đoković, Ksenija",
year = "2023",
abstract = "U radu je prikazan sadržaj predloženog dokumenta Elaborata ispitivanja šipova i jasnije
su razjašnjene aktivnosti koje su obuhvaćene ovim dokumentom. Na primeru objekta Ušće 2
demonstrirana je primena jednog dela rešenja o ispitivanju šipova, a što bi se našlo u samom
elaboratu. Analizirane su količine (obim) ispitivanja šipova po tipovima testova i analizirane su
aktivnosti u okviru svakog pojedinačnog testa. Naglašeno je da je potrebna bolja saradnja na
relaciji projektant, izvođač i nadzora prema ispitivaču šipova.",
journal = "GEOTEHNIČKI ASPEKTI GRAĐEVINARSTVA I ZEMLJOTRESNO INŽENJERSTVO - Vrnjačka Banja",
title = "Analiza modela upravljanja kvalitetom ispitivanja šipova",
pages = "581-571",
url = "https://hdl.handle.net/21.15107/rcub_rims_672"
}

Ćosić, M., Šušić, N., Prica, M., Božović, N.,& Đoković, K.. (2023). Analiza modela upravljanja kvalitetom ispitivanja šipova. in GEOTEHNIČKI ASPEKTI GRAĐEVINARSTVA I ZEMLJOTRESNO INŽENJERSTVO - Vrnjačka Banja, 571-581.
https://hdl.handle.net/21.15107/rcub_rims_672

Ćosić M, Šušić N, Prica M, Božović N, Đoković K. Analiza modela upravljanja kvalitetom ispitivanja šipova. in GEOTEHNIČKI ASPEKTI GRAĐEVINARSTVA I ZEMLJOTRESNO INŽENJERSTVO - Vrnjačka Banja. 2023;:571-581.
https://hdl.handle.net/21.15107/rcub_rims_672 .

Ćosić, Mladen, Šušić, Nenad, Prica, Marko, Božović, Nikola, Đoković, Ksenija, "Analiza modela upravljanja kvalitetom ispitivanja šipova" in GEOTEHNIČKI ASPEKTI GRAĐEVINARSTVA I ZEMLJOTRESNO INŽENJERSTVO - Vrnjačka Banja (2023):571-581,
https://hdl.handle.net/21.15107/rcub_rims_672 .

TY  - CONF
AU  - Ćosić, Mladen
AU  - Šušić, Nenad
AU  - Prica, Marko
AU  - Božović, Nikola
AU  - Đoković, Ksenija
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/673
AB  - U radu je ukazano na postojeće probleme koji se pojavljuju prilikom planiranja, u toku i
nakon ispitivanja šipova. U tom smislu, na osnovu iskustava autora rada, predloženi su modeli
upravljanja kvalitetom ispitivanja šipova kojima se efikasnije planiraju i rešavaju sve aktivnosti
ispitivanja šipova i utiče na donošenje odluka koje se u praksi neadekvatno rešavaju. Posebno je
naglašeno uvođenje i primena Elaborata ispitivanja šipova kao nova forma dokumenta u kojem bi
se celokupna aktivnost planiranja, ispitivanja i donošenja odluka nakon ispitivnaja adekvatno
ispratili.
C3  - GEOTEHNIČKI ASPEKTI GRAĐEVINARSTVA I ZEMLJOTRESNO INŽENJERSTVO - Vrnjačka Banja
T1  - Razvoj modela upravljanja kvalitetom ispitivanja šipova
EP  - 570
SP  - 558
UR  - https://hdl.handle.net/21.15107/rcub_rims_673
ER  - 

@conference{
author = "Ćosić, Mladen and Šušić, Nenad and Prica, Marko and Božović, Nikola and Đoković, Ksenija",
year = "2023",
abstract = "U radu je ukazano na postojeće probleme koji se pojavljuju prilikom planiranja, u toku i
nakon ispitivanja šipova. U tom smislu, na osnovu iskustava autora rada, predloženi su modeli
upravljanja kvalitetom ispitivanja šipova kojima se efikasnije planiraju i rešavaju sve aktivnosti
ispitivanja šipova i utiče na donošenje odluka koje se u praksi neadekvatno rešavaju. Posebno je
naglašeno uvođenje i primena Elaborata ispitivanja šipova kao nova forma dokumenta u kojem bi
se celokupna aktivnost planiranja, ispitivanja i donošenja odluka nakon ispitivnaja adekvatno
ispratili.",
journal = "GEOTEHNIČKI ASPEKTI GRAĐEVINARSTVA I ZEMLJOTRESNO INŽENJERSTVO - Vrnjačka Banja",
title = "Razvoj modela upravljanja kvalitetom ispitivanja šipova",
pages = "570-558",
url = "https://hdl.handle.net/21.15107/rcub_rims_673"
}

Ćosić, M., Šušić, N., Prica, M., Božović, N.,& Đoković, K.. (2023). Razvoj modela upravljanja kvalitetom ispitivanja šipova. in GEOTEHNIČKI ASPEKTI GRAĐEVINARSTVA I ZEMLJOTRESNO INŽENJERSTVO - Vrnjačka Banja, 558-570.
https://hdl.handle.net/21.15107/rcub_rims_673

Ćosić M, Šušić N, Prica M, Božović N, Đoković K. Razvoj modela upravljanja kvalitetom ispitivanja šipova. in GEOTEHNIČKI ASPEKTI GRAĐEVINARSTVA I ZEMLJOTRESNO INŽENJERSTVO - Vrnjačka Banja. 2023;:558-570.
https://hdl.handle.net/21.15107/rcub_rims_673 .

Ćosić, Mladen, Šušić, Nenad, Prica, Marko, Božović, Nikola, Đoković, Ksenija, "Razvoj modela upravljanja kvalitetom ispitivanja šipova" in GEOTEHNIČKI ASPEKTI GRAĐEVINARSTVA I ZEMLJOTRESNO INŽENJERSTVO - Vrnjačka Banja (2023):558-570,
https://hdl.handle.net/21.15107/rcub_rims_673 .

TY  - JOUR
AU  - Ćosić, Mladen
AU  - Šušić, Nenad
AU  - Prica, Marko
AU  - Đoković, Ksenija
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/493
AB  - The paper shows the comparative analysis of behavior and bearing capacity of piles examined using the Dynamic Load Test (DLT) according to Static Load Test (SLT) results. The pile testing methodology is based on the existing ASTM standards and experiences of the authors of the paper. The pile tests were carried out using counterweights, reactive system, dynamic testing equipment, hardware and software for SLT and DLT. The data obtained by testing were statis-tically processed, and also a regression analysis of the linear function was conducted, resulting in the creation of the model for the change of mobilized static bearing capacity from DLT according to SLT. In addition, a procedure for correcting the solution of mobilized static bearing capacity from DLT according to SLT, is made by observing provisions of standard EN 1997-1:2004, so the average deviation of solutions from DLT according to SLT is reduced. Apart from that, through iterations, the value of correlation factor ξ5 is determined, taking into consideration solutions presented by SLT and DLT of piles of the real structures.
T2  - Structural Integrity and Life, Special Issue
T1  - Procedure for correction of bearing capacity of piles examined by the Dynamic Load Test (DLT) according to the Static Load Test (SLT)
EP  - 68
SP  - 53
VL  - 23
UR  - https://hdl.handle.net/21.15107/rcub_rims_493
ER  - 

@article{
author = "Ćosić, Mladen and Šušić, Nenad and Prica, Marko and Đoković, Ksenija",
year = "2023",
abstract = "The paper shows the comparative analysis of behavior and bearing capacity of piles examined using the Dynamic Load Test (DLT) according to Static Load Test (SLT) results. The pile testing methodology is based on the existing ASTM standards and experiences of the authors of the paper. The pile tests were carried out using counterweights, reactive system, dynamic testing equipment, hardware and software for SLT and DLT. The data obtained by testing were statis-tically processed, and also a regression analysis of the linear function was conducted, resulting in the creation of the model for the change of mobilized static bearing capacity from DLT according to SLT. In addition, a procedure for correcting the solution of mobilized static bearing capacity from DLT according to SLT, is made by observing provisions of standard EN 1997-1:2004, so the average deviation of solutions from DLT according to SLT is reduced. Apart from that, through iterations, the value of correlation factor ξ5 is determined, taking into consideration solutions presented by SLT and DLT of piles of the real structures.",
journal = "Structural Integrity and Life, Special Issue",
title = "Procedure for correction of bearing capacity of piles examined by the Dynamic Load Test (DLT) according to the Static Load Test (SLT)",
pages = "68-53",
volume = "23",
url = "https://hdl.handle.net/21.15107/rcub_rims_493"
}

Ćosić, M., Šušić, N., Prica, M.,& Đoković, K.. (2023). Procedure for correction of bearing capacity of piles examined by the Dynamic Load Test (DLT) according to the Static Load Test (SLT). in Structural Integrity and Life, Special Issue, 23, 53-68.
https://hdl.handle.net/21.15107/rcub_rims_493

Ćosić M, Šušić N, Prica M, Đoković K. Procedure for correction of bearing capacity of piles examined by the Dynamic Load Test (DLT) according to the Static Load Test (SLT). in Structural Integrity and Life, Special Issue. 2023;23:53-68.
https://hdl.handle.net/21.15107/rcub_rims_493 .

Ćosić, Mladen, Šušić, Nenad, Prica, Marko, Đoković, Ksenija, "Procedure for correction of bearing capacity of piles examined by the Dynamic Load Test (DLT) according to the Static Load Test (SLT)" in Structural Integrity and Life, Special Issue, 23 (2023):53-68,
https://hdl.handle.net/21.15107/rcub_rims_493 .

TY  - JOUR
AU  - Đoković, Ksenija
AU  - Šušić, Nenad
AU  - Ćosić, Mladen
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/492
AB  - The application of dispersive soil can result in various types of damage, and even the collapse of embanked build-ings if it is not identified. Dispersive soils cannot be uniquely identified by visual identification in the field, or by usual standard methods used for soil identification in the geo-mechanical laboratory. The paper presents the results of laboratory geomechanical tests aimed at identifying and classifying erodible dispersive fine-grained soil. The tests were carried out using the crumb test, the double hydrometer test (SCS), and the pinhole test on samples: sandy clay embankment dams of ‘Rovni’, loess from different locations (Zemun, Novi Beograd, Titel, Kelebija, Srbobran, Slanka-men, Ruma, Mali Iđoš) and kaolinite sandy clay deposits Grabež - Aranđelovac. The possibility of improving disper-sive soil by adding fly ash was also analyzed. Pinhole tests on dispersive soil samples with the addition of 10, 30 and 50 % ash showed that there was a decrease in dispersivity of natural soil for one to two dispersion classes.
T2  - Integritet i vek konstrukcija, specijalno izdanje
T1  - Dispersive Soils: Properties, Identification, Classification and Stabilization
EP  - 52
SP  - 47
VL  - 23
UR  - https://hdl.handle.net/21.15107/rcub_rims_492
ER  - 

@article{
author = "Đoković, Ksenija and Šušić, Nenad and Ćosić, Mladen",
year = "2023",
abstract = "The application of dispersive soil can result in various types of damage, and even the collapse of embanked build-ings if it is not identified. Dispersive soils cannot be uniquely identified by visual identification in the field, or by usual standard methods used for soil identification in the geo-mechanical laboratory. The paper presents the results of laboratory geomechanical tests aimed at identifying and classifying erodible dispersive fine-grained soil. The tests were carried out using the crumb test, the double hydrometer test (SCS), and the pinhole test on samples: sandy clay embankment dams of ‘Rovni’, loess from different locations (Zemun, Novi Beograd, Titel, Kelebija, Srbobran, Slanka-men, Ruma, Mali Iđoš) and kaolinite sandy clay deposits Grabež - Aranđelovac. The possibility of improving disper-sive soil by adding fly ash was also analyzed. Pinhole tests on dispersive soil samples with the addition of 10, 30 and 50 % ash showed that there was a decrease in dispersivity of natural soil for one to two dispersion classes.",
journal = "Integritet i vek konstrukcija, specijalno izdanje",
title = "Dispersive Soils: Properties, Identification, Classification and Stabilization",
pages = "52-47",
volume = "23",
url = "https://hdl.handle.net/21.15107/rcub_rims_492"
}

Đoković, K., Šušić, N.,& Ćosić, M.. (2023). Dispersive Soils: Properties, Identification, Classification and Stabilization. in Integritet i vek konstrukcija, specijalno izdanje, 23, 47-52.
https://hdl.handle.net/21.15107/rcub_rims_492

Đoković K, Šušić N, Ćosić M. Dispersive Soils: Properties, Identification, Classification and Stabilization. in Integritet i vek konstrukcija, specijalno izdanje. 2023;23:47-52.
https://hdl.handle.net/21.15107/rcub_rims_492 .

Đoković, Ksenija, Šušić, Nenad, Ćosić, Mladen, "Dispersive Soils: Properties, Identification, Classification and Stabilization" in Integritet i vek konstrukcija, specijalno izdanje, 23 (2023):47-52,
https://hdl.handle.net/21.15107/rcub_rims_492 .

TY  - JOUR
AU  - Šušić, Nenad
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/491
AB  - Razvojem građevinskog konstrukterstva, projektovanja i izgradnje objekata pod rukovodstvom vrhunskih stručnjaka Instituta IMS, u vreme postojanja Jugoslavije, razvijala se i svest o potrebi uvođenja geotehničkog inženjerstva u okviru instituta. S obzirom da su se, u fazi projektovanja, pojavlji-vali problemi na koje je trebalo dati odgovore po pitanju fundiranja objekata, to se vremenom javljala i potreba za uvođenjem geotehničkog inženjerstva kao posebnog centra u okviru Instituta IMS. U tom smislu, paralelno sa razvojem i implementacijom geotehničkog inženjerstva, stvarana su i nova iskustva u ovoj multidisciplinarnoj kompleksnoj oblasti koja povezuje građevinarstvo i geologiju. Hronološki posma-trano geotehničko inženjerstvo u Institutu IMS može se pode-liti na tri vremenska perioda: prošlost 1948-2000.god. kao period razvoja, implementacije i projektovanja građevin-skih i geotehničkih konstrukcija, sadašnjost 2000-2023. god, period uvođenja multidisciplinarnih savremenih metoda ispi-tivanja tla i geotehničkih konstrukcija uzimajući u obzir soft-versko-hardverski inženjering, i budućnost od 2023. god. kao period značajnije primene informatičkih tehnologija i siste-ma u rešavanju geotehničkih problema.
T2  - Integritet i vek konstrukcija, specijalno izdanje
T1  - Geotehničko inženjerstvo instituta za ispitivanje materijala IMS
EP  - 46
SP  - 41
VL  - 23
UR  - https://hdl.handle.net/21.15107/rcub_rims_491
ER  - 

@article{
author = "Šušić, Nenad",
year = "2023",
abstract = "Razvojem građevinskog konstrukterstva, projektovanja i izgradnje objekata pod rukovodstvom vrhunskih stručnjaka Instituta IMS, u vreme postojanja Jugoslavije, razvijala se i svest o potrebi uvođenja geotehničkog inženjerstva u okviru instituta. S obzirom da su se, u fazi projektovanja, pojavlji-vali problemi na koje je trebalo dati odgovore po pitanju fundiranja objekata, to se vremenom javljala i potreba za uvođenjem geotehničkog inženjerstva kao posebnog centra u okviru Instituta IMS. U tom smislu, paralelno sa razvojem i implementacijom geotehničkog inženjerstva, stvarana su i nova iskustva u ovoj multidisciplinarnoj kompleksnoj oblasti koja povezuje građevinarstvo i geologiju. Hronološki posma-trano geotehničko inženjerstvo u Institutu IMS može se pode-liti na tri vremenska perioda: prošlost 1948-2000.god. kao period razvoja, implementacije i projektovanja građevin-skih i geotehničkih konstrukcija, sadašnjost 2000-2023. god, period uvođenja multidisciplinarnih savremenih metoda ispi-tivanja tla i geotehničkih konstrukcija uzimajući u obzir soft-versko-hardverski inženjering, i budućnost od 2023. god. kao period značajnije primene informatičkih tehnologija i siste-ma u rešavanju geotehničkih problema.",
journal = "Integritet i vek konstrukcija, specijalno izdanje",
title = "Geotehničko inženjerstvo instituta za ispitivanje materijala IMS",
pages = "46-41",
volume = "23",
url = "https://hdl.handle.net/21.15107/rcub_rims_491"
}

Šušić, N.. (2023). Geotehničko inženjerstvo instituta za ispitivanje materijala IMS. in Integritet i vek konstrukcija, specijalno izdanje, 23, 41-46.
https://hdl.handle.net/21.15107/rcub_rims_491

Šušić N. Geotehničko inženjerstvo instituta za ispitivanje materijala IMS. in Integritet i vek konstrukcija, specijalno izdanje. 2023;23:41-46.
https://hdl.handle.net/21.15107/rcub_rims_491 .

Šušić, Nenad, "Geotehničko inženjerstvo instituta za ispitivanje materijala IMS" in Integritet i vek konstrukcija, specijalno izdanje, 23 (2023):41-46,
https://hdl.handle.net/21.15107/rcub_rims_491 .

TY  - JOUR
AU  - Ćosić, Mladen
AU  - Šušić, Nenad
AU  - Đoković, Ksenija
PY  - 2022
UR  - http://rims.institutims.rs/handle/123456789/764
AB  - The paper presents the static load tests (SLT) and dynamic load tests (DLT) of the piles and numerical analyses of piles in interaction with the soil of wind turbines. Pile tests were conducted using the equipment with counterweights for SLT and an autonomous system for the control of DLT of the piles. Numerical DLT analyses were performed by the signal matching method. Tests proved that the design resistance of piles of SLT and mobilized static resistance of DLT are higher than the design forces obtained from the design of the wind turbine foundations. Also, the need to develop a plan for testing the bearing capacity of piles, concerning large and significant buildings was emphasized.
T2  - Comptes rendus de l’Académie bulgare des Sciences
T1  - Static-Dynamic Tests of Bearing Capacity of Wind Turbine Piles
EP  - 1507
IS  - 10
SP  - 1499
VL  - 75
DO  - 10.7546/CRABS.2022.10.13
ER  - 

@article{
author = "Ćosić, Mladen and Šušić, Nenad and Đoković, Ksenija",
year = "2022",
abstract = "The paper presents the static load tests (SLT) and dynamic load tests (DLT) of the piles and numerical analyses of piles in interaction with the soil of wind turbines. Pile tests were conducted using the equipment with counterweights for SLT and an autonomous system for the control of DLT of the piles. Numerical DLT analyses were performed by the signal matching method. Tests proved that the design resistance of piles of SLT and mobilized static resistance of DLT are higher than the design forces obtained from the design of the wind turbine foundations. Also, the need to develop a plan for testing the bearing capacity of piles, concerning large and significant buildings was emphasized.",
journal = "Comptes rendus de l’Académie bulgare des Sciences",
title = "Static-Dynamic Tests of Bearing Capacity of Wind Turbine Piles",
pages = "1507-1499",
number = "10",
volume = "75",
doi = "10.7546/CRABS.2022.10.13"
}

Ćosić, M., Šušić, N.,& Đoković, K.. (2022). Static-Dynamic Tests of Bearing Capacity of Wind Turbine Piles. in Comptes rendus de l’Académie bulgare des Sciences, 75(10), 1499-1507.
https://doi.org/10.7546/CRABS.2022.10.13

Ćosić M, Šušić N, Đoković K. Static-Dynamic Tests of Bearing Capacity of Wind Turbine Piles. in Comptes rendus de l’Académie bulgare des Sciences. 2022;75(10):1499-1507.
doi:10.7546/CRABS.2022.10.13 .

Ćosić, Mladen, Šušić, Nenad, Đoković, Ksenija, "Static-Dynamic Tests of Bearing Capacity of Wind Turbine Piles" in Comptes rendus de l’Académie bulgare des Sciences, 75, no. 10 (2022):1499-1507,
https://doi.org/10.7546/CRABS.2022.10.13 . .

TY  - CONF
AU  - Ćosić, Mladen
AU  - Šušić, Nenad
PY  - 2022
UR  - http://rims.institutims.rs/handle/123456789/608
AB  - The paper presents the comparative analysis of several piles for different pier locations of a bridge by employing in-situ deep foundations tests and in-situ soil tests. The focus of the paper is on the
presentation of the reliability of solutions obtained using the Dynamic Load Test (DLT) for in-situ
tests of the bearing capacity of deep foundations – piles. The DLT test was conducted in two stages:
in-situ DLT of piles and pile bearing capacity analysis using the wave theory and the method of
characteristics. The signals of upward traveling force waves, obtained by in-situ DLT of piles were
signal matched with the signals of the numerical nonlinear model of the dynamic pile-soil interaction.
The results of DLT of pile bearing capacity are presented as componential values (regarding the pile
base and the pile shaft) and as a cumulative value (total bearing capacity), so that the comparison of
DLT and pressuremeter test (PMT) was conducted both according to componential and cumulative
bearing capacities. Since it is not possible to strictly conduct DLT and PMT for the same settlement
level, it is not possible to directly compare the bearing capacity, however the comparison was
performed taking into account the bearing capacities from PMTs according to Eurocode 7. DLTs
provided bearing capacities which correlate well with the PMTs results. Also, DLTs determined the
corresponding elastoplastic settlement for the designed resistance of piles, which is very useful to the designers in the analysis of serviceability (settlement) of both the pier locations and of the entire bridge.
C3  - 5th symposium of the Macedonian Association for Geotechnics, Ohrid, Macedonia, Proceedings
T1  - Comparative Analysis of Bearing Capacity of Piles Tested by Dynamic Load Test (DLT) and Pressuremeter Test (PMT)
EP  - 354
SP  - 344
UR  - https://hdl.handle.net/21.15107/rcub_rims_608
ER  - 

@conference{
author = "Ćosić, Mladen and Šušić, Nenad",
year = "2022",
abstract = "The paper presents the comparative analysis of several piles for different pier locations of a bridge by employing in-situ deep foundations tests and in-situ soil tests. The focus of the paper is on the
presentation of the reliability of solutions obtained using the Dynamic Load Test (DLT) for in-situ
tests of the bearing capacity of deep foundations – piles. The DLT test was conducted in two stages:
in-situ DLT of piles and pile bearing capacity analysis using the wave theory and the method of
characteristics. The signals of upward traveling force waves, obtained by in-situ DLT of piles were
signal matched with the signals of the numerical nonlinear model of the dynamic pile-soil interaction.
The results of DLT of pile bearing capacity are presented as componential values (regarding the pile
base and the pile shaft) and as a cumulative value (total bearing capacity), so that the comparison of
DLT and pressuremeter test (PMT) was conducted both according to componential and cumulative
bearing capacities. Since it is not possible to strictly conduct DLT and PMT for the same settlement
level, it is not possible to directly compare the bearing capacity, however the comparison was
performed taking into account the bearing capacities from PMTs according to Eurocode 7. DLTs
provided bearing capacities which correlate well with the PMTs results. Also, DLTs determined the
corresponding elastoplastic settlement for the designed resistance of piles, which is very useful to the designers in the analysis of serviceability (settlement) of both the pier locations and of the entire bridge.",
journal = "5th symposium of the Macedonian Association for Geotechnics, Ohrid, Macedonia, Proceedings",
title = "Comparative Analysis of Bearing Capacity of Piles Tested by Dynamic Load Test (DLT) and Pressuremeter Test (PMT)",
pages = "354-344",
url = "https://hdl.handle.net/21.15107/rcub_rims_608"
}

Ćosić, M.,& Šušić, N.. (2022). Comparative Analysis of Bearing Capacity of Piles Tested by Dynamic Load Test (DLT) and Pressuremeter Test (PMT). in 5th symposium of the Macedonian Association for Geotechnics, Ohrid, Macedonia, Proceedings, 344-354.
https://hdl.handle.net/21.15107/rcub_rims_608

Ćosić M, Šušić N. Comparative Analysis of Bearing Capacity of Piles Tested by Dynamic Load Test (DLT) and Pressuremeter Test (PMT). in 5th symposium of the Macedonian Association for Geotechnics, Ohrid, Macedonia, Proceedings. 2022;:344-354.
https://hdl.handle.net/21.15107/rcub_rims_608 .

Ćosić, Mladen, Šušić, Nenad, "Comparative Analysis of Bearing Capacity of Piles Tested by Dynamic Load Test (DLT) and Pressuremeter Test (PMT)" in 5th symposium of the Macedonian Association for Geotechnics, Ohrid, Macedonia, Proceedings (2022):344-354,
https://hdl.handle.net/21.15107/rcub_rims_608 .

TY  - CONF
AU  - Đoković, Ksenija
AU  - Šušić, Nenad
AU  - Drobnjaković, Marina
PY  - 2022
UR  - http://rims.institutims.rs/handle/123456789/591
AB  - The paper presents the results of testing the influence of mineralogical composition on the physical and mechanical properties of clayey soil, i.e. Atteberg consistency limits. The tests were conducted on samples of highly plastic clay soil with a high content of clay component in the granulometric composition (CF>80%). The results show that the liquid limit (LL) and the plasticity index (PI) increase with the increased content of clay minerals. High content of clay fraction, high values of Atteberg's consistency limits, analysis of colloidal activity, mineralogical and chemical analyzes showed that these are bentonite type clays containing montmorillonite and kaolinite minerals.
C3  - XXVIII Congress DIMK and IX congress SIGP with International Symposium on Researching and Application of Contemporary Achievements in Civil Engineering in the Field of Materials and Structures, Divčibare, Serbia
T1  - The influence of mineral composition on the plastic properties of clay soil
EP  - 387
SP  - 381
UR  - https://hdl.handle.net/21.15107/rcub_rims_591
ER  - 

@conference{
author = "Đoković, Ksenija and Šušić, Nenad and Drobnjaković, Marina",
year = "2022",
abstract = "The paper presents the results of testing the influence of mineralogical composition on the physical and mechanical properties of clayey soil, i.e. Atteberg consistency limits. The tests were conducted on samples of highly plastic clay soil with a high content of clay component in the granulometric composition (CF>80%). The results show that the liquid limit (LL) and the plasticity index (PI) increase with the increased content of clay minerals. High content of clay fraction, high values of Atteberg's consistency limits, analysis of colloidal activity, mineralogical and chemical analyzes showed that these are bentonite type clays containing montmorillonite and kaolinite minerals.",
journal = "XXVIII Congress DIMK and IX congress SIGP with International Symposium on Researching and Application of Contemporary Achievements in Civil Engineering in the Field of Materials and Structures, Divčibare, Serbia",
title = "The influence of mineral composition on the plastic properties of clay soil",
pages = "387-381",
url = "https://hdl.handle.net/21.15107/rcub_rims_591"
}

Đoković, K., Šušić, N.,& Drobnjaković, M.. (2022). The influence of mineral composition on the plastic properties of clay soil. in XXVIII Congress DIMK and IX congress SIGP with International Symposium on Researching and Application of Contemporary Achievements in Civil Engineering in the Field of Materials and Structures, Divčibare, Serbia, 381-387.
https://hdl.handle.net/21.15107/rcub_rims_591

Đoković K, Šušić N, Drobnjaković M. The influence of mineral composition on the plastic properties of clay soil. in XXVIII Congress DIMK and IX congress SIGP with International Symposium on Researching and Application of Contemporary Achievements in Civil Engineering in the Field of Materials and Structures, Divčibare, Serbia. 2022;:381-387.
https://hdl.handle.net/21.15107/rcub_rims_591 .

Đoković, Ksenija, Šušić, Nenad, Drobnjaković, Marina, "The influence of mineral composition on the plastic properties of clay soil" in XXVIII Congress DIMK and IX congress SIGP with International Symposium on Researching and Application of Contemporary Achievements in Civil Engineering in the Field of Materials and Structures, Divčibare, Serbia (2022):381-387,
https://hdl.handle.net/21.15107/rcub_rims_591 .

TY  - CONF
AU  - Ćosić, Mladen
AU  - Šušić, Nenad
AU  - Prica, Marko
AU  - Božović, Nikola
PY  - 2021
UR  - http://rims.institutims.rs/handle/123456789/753
AB  - The paper presents typical examples of pile load tests with a specific analysis of results, whereby the test methodology relies on existing ASTM standards, own knowledge and experience. The pile tests were conducted using own equipment with licensed hardware and software for the Dynamic Load Test (DLT). The tests have shown the correct and problematic situations that arise when analyzing the bearing capacity of piles. Aspects of application of different equipment and testing methodologies in different situations are indicated. Also, the need to develop a plan for testing the load capacity of piles when it comes to large and significant structures was pointed out.
PB  - Savez građevinskih inženjera Srbije SGIS
C3  - Earthquake Engineering and Geotechnical Aspects of Civil Engineering, Vrnjačka Banja, Serbia
T1  - Some Aspects of Pile Testing Using Dynamic Load Test (DLT)
EP  - 299
SP  - 289
UR  - https://hdl.handle.net/21.15107/rcub_rims_753
ER  - 

@conference{
author = "Ćosić, Mladen and Šušić, Nenad and Prica, Marko and Božović, Nikola",
year = "2021",
abstract = "The paper presents typical examples of pile load tests with a specific analysis of results, whereby the test methodology relies on existing ASTM standards, own knowledge and experience. The pile tests were conducted using own equipment with licensed hardware and software for the Dynamic Load Test (DLT). The tests have shown the correct and problematic situations that arise when analyzing the bearing capacity of piles. Aspects of application of different equipment and testing methodologies in different situations are indicated. Also, the need to develop a plan for testing the load capacity of piles when it comes to large and significant structures was pointed out.",
publisher = "Savez građevinskih inženjera Srbije SGIS",
journal = "Earthquake Engineering and Geotechnical Aspects of Civil Engineering, Vrnjačka Banja, Serbia",
title = "Some Aspects of Pile Testing Using Dynamic Load Test (DLT)",
pages = "299-289",
url = "https://hdl.handle.net/21.15107/rcub_rims_753"
}

Ćosić, M., Šušić, N., Prica, M.,& Božović, N.. (2021). Some Aspects of Pile Testing Using Dynamic Load Test (DLT). in Earthquake Engineering and Geotechnical Aspects of Civil Engineering, Vrnjačka Banja, Serbia
Savez građevinskih inženjera Srbije SGIS., 289-299.
https://hdl.handle.net/21.15107/rcub_rims_753

Ćosić M, Šušić N, Prica M, Božović N. Some Aspects of Pile Testing Using Dynamic Load Test (DLT). in Earthquake Engineering and Geotechnical Aspects of Civil Engineering, Vrnjačka Banja, Serbia. 2021;:289-299.
https://hdl.handle.net/21.15107/rcub_rims_753 .

Ćosić, Mladen, Šušić, Nenad, Prica, Marko, Božović, Nikola, "Some Aspects of Pile Testing Using Dynamic Load Test (DLT)" in Earthquake Engineering and Geotechnical Aspects of Civil Engineering, Vrnjačka Banja, Serbia (2021):289-299,
https://hdl.handle.net/21.15107/rcub_rims_753 .

TY  - CONF
AU  - Ćosić, Mladen
AU  - Šušić, Nenad
AU  - Prica, Marko
PY  - 2021
UR  - http://rims.institutims.rs/handle/123456789/754
AB  - The paper presents typical examples of pile load tests with a specific analysis of results, whereby the test methodology relies on existing ASTM standards, own knowledge and experience. The pile tests were conducted using own equipment with licensed hardware and software for the Static Load Test (SLT). The tests have shown some situations that arise when analyzing the bearing capacity of piles. Aspects of application of different equipment and testing methodologies in different situations are indicated. Also, the need to develop a plan for testing the load capacity of piles when it comes to large and significant structures was pointed out.
PB  - Savez građevinskih inženjera Srbije SGIS
C3  - Earthquake Engineering and Geotechnical Aspects of Civil Engineering, Vrnjačka Banja, Serbia
T1  - Some Aspects of Pile Testing Using Static Load Test (SLT)
EP  - 327
SP  - 317
UR  - https://hdl.handle.net/21.15107/rcub_rims_754
ER  - 

@conference{
author = "Ćosić, Mladen and Šušić, Nenad and Prica, Marko",
year = "2021",
abstract = "The paper presents typical examples of pile load tests with a specific analysis of results, whereby the test methodology relies on existing ASTM standards, own knowledge and experience. The pile tests were conducted using own equipment with licensed hardware and software for the Static Load Test (SLT). The tests have shown some situations that arise when analyzing the bearing capacity of piles. Aspects of application of different equipment and testing methodologies in different situations are indicated. Also, the need to develop a plan for testing the load capacity of piles when it comes to large and significant structures was pointed out.",
publisher = "Savez građevinskih inženjera Srbije SGIS",
journal = "Earthquake Engineering and Geotechnical Aspects of Civil Engineering, Vrnjačka Banja, Serbia",
title = "Some Aspects of Pile Testing Using Static Load Test (SLT)",
pages = "327-317",
url = "https://hdl.handle.net/21.15107/rcub_rims_754"
}

Ćosić, M., Šušić, N.,& Prica, M.. (2021). Some Aspects of Pile Testing Using Static Load Test (SLT). in Earthquake Engineering and Geotechnical Aspects of Civil Engineering, Vrnjačka Banja, Serbia
Savez građevinskih inženjera Srbije SGIS., 317-327.
https://hdl.handle.net/21.15107/rcub_rims_754

Ćosić M, Šušić N, Prica M. Some Aspects of Pile Testing Using Static Load Test (SLT). in Earthquake Engineering and Geotechnical Aspects of Civil Engineering, Vrnjačka Banja, Serbia. 2021;:317-327.
https://hdl.handle.net/21.15107/rcub_rims_754 .

Ćosić, Mladen, Šušić, Nenad, Prica, Marko, "Some Aspects of Pile Testing Using Static Load Test (SLT)" in Earthquake Engineering and Geotechnical Aspects of Civil Engineering, Vrnjačka Banja, Serbia (2021):317-327,
https://hdl.handle.net/21.15107/rcub_rims_754 .

TY  - PAT
AU  - Ćosić, Mladen
AU  - Šušić, Nenad
AU  - Prica, Marko
PY  - 2021
UR  - http://rims.institutims.rs/handle/123456789/623
T2  - Nacionalni registar
T1  - Sistem sa oprugom za poboljšanje dinamičkog ispitivanja šipa
UR  - https://hdl.handle.net/21.15107/rcub_rims_623
ER  - 

@misc{
author = "Ćosić, Mladen and Šušić, Nenad and Prica, Marko",
year = "2021",
journal = "Nacionalni registar",
title = "Sistem sa oprugom za poboljšanje dinamičkog ispitivanja šipa",
url = "https://hdl.handle.net/21.15107/rcub_rims_623"
}

Ćosić, M., Šušić, N.,& Prica, M.. (2021). Sistem sa oprugom za poboljšanje dinamičkog ispitivanja šipa. in Nacionalni registar.
https://hdl.handle.net/21.15107/rcub_rims_623

Ćosić M, Šušić N, Prica M. Sistem sa oprugom za poboljšanje dinamičkog ispitivanja šipa. in Nacionalni registar. 2021;.
https://hdl.handle.net/21.15107/rcub_rims_623 .

Ćosić, Mladen, Šušić, Nenad, Prica, Marko, "Sistem sa oprugom za poboljšanje dinamičkog ispitivanja šipa" in Nacionalni registar (2021),
https://hdl.handle.net/21.15107/rcub_rims_623 .

TY  - JOUR
AU  - Đoković, Ksenija
AU  - Hadži-Niković, Gordana
AU  - Šušić, Nenad
PY  - 2021
UR  - http://rims.institutims.rs/handle/123456789/401
AB  - Due to rapid development of modern highways and railroad in Serbia, the need for embankment materials has increased. Deposits of natural materials used for this purpose often contain dispersive soils. On the other hand, thermal power plants in Serbia annually generate several million tons of fly ash, which could be used to reduce the dispersion of material embedded in embankments. The paper presents the results of tests conducted for the first time in Serbia to assess the improvement in natural soil dispersivity with fly ash from a thermal power plant. The dispersivity of mixtures of fly ash and natural soil was tested according to ASTM and BS standards. To determine the optimal ash content, 10, 30 or 50% of fly ash was added to the soil samples. The results show that 30-50% of fly ash reduces the dispersivity of natural soil for one to two dispersion classes.
PB  - Publ House Bulgarian Acad Sci, Sofia
T2  - Comptes Rendus de l Academie Bulgare des Sciences
T1  - Application of fly ash to reduce soil dispersivity in embankments
EP  - 898
IS  - 6
SP  - 890
VL  - 74
DO  - 10.7546/CRABS.2021.06.11
ER  - 

@article{
author = "Đoković, Ksenija and Hadži-Niković, Gordana and Šušić, Nenad",
year = "2021",
abstract = "Due to rapid development of modern highways and railroad in Serbia, the need for embankment materials has increased. Deposits of natural materials used for this purpose often contain dispersive soils. On the other hand, thermal power plants in Serbia annually generate several million tons of fly ash, which could be used to reduce the dispersion of material embedded in embankments. The paper presents the results of tests conducted for the first time in Serbia to assess the improvement in natural soil dispersivity with fly ash from a thermal power plant. The dispersivity of mixtures of fly ash and natural soil was tested according to ASTM and BS standards. To determine the optimal ash content, 10, 30 or 50% of fly ash was added to the soil samples. The results show that 30-50% of fly ash reduces the dispersivity of natural soil for one to two dispersion classes.",
publisher = "Publ House Bulgarian Acad Sci, Sofia",
journal = "Comptes Rendus de l Academie Bulgare des Sciences",
title = "Application of fly ash to reduce soil dispersivity in embankments",
pages = "898-890",
number = "6",
volume = "74",
doi = "10.7546/CRABS.2021.06.11"
}

Đoković, K., Hadži-Niković, G.,& Šušić, N.. (2021). Application of fly ash to reduce soil dispersivity in embankments. in Comptes Rendus de l Academie Bulgare des Sciences
Publ House Bulgarian Acad Sci, Sofia., 74(6), 890-898.
https://doi.org/10.7546/CRABS.2021.06.11

Đoković K, Hadži-Niković G, Šušić N. Application of fly ash to reduce soil dispersivity in embankments. in Comptes Rendus de l Academie Bulgare des Sciences. 2021;74(6):890-898.
doi:10.7546/CRABS.2021.06.11 .

Đoković, Ksenija, Hadži-Niković, Gordana, Šušić, Nenad, "Application of fly ash to reduce soil dispersivity in embankments" in Comptes Rendus de l Academie Bulgare des Sciences, 74, no. 6 (2021):890-898,
https://doi.org/10.7546/CRABS.2021.06.11 . .

TY  - JOUR
AU  - Ćosić, Mladen
AU  - Šušić, Nenad
AU  - Folić, Radomir
AU  - Folić, Boris
PY  - 2020
UR  - http://rims.institutims.rs/handle/123456789/386
AB  - This paper formulates a mathematical model using the extrapolation of load-settlement curves with a rational function for analyzing the capacity of piles obtained from the static load test (SLT). In preliminary analyses, the extrapolation was based on the application of a number of mathematical functions that were gradually eliminated by iterative selection and filtering. The solution was obtained by extrapolation with a rational function. Using a rational function in the extrapolation of the load-settlement curve, a clearly identifiable part is obtained in which the asymptote is vertical, indicating the reached limit state of capacity in the soil and/or in the pile. The probabilistic analysis showed that no unique value for pile capacity was obtained, and that the spectrum of capacity values depends on the probability of occurrence of the corresponding event.
PB  - Springer, New York
T2  - Soil Mechanics and Foundation Engineering
T1  - Model of Probabilistic Analysis of Pile Capacity Based on the Extrapolation of Load-Settlement Curves
EP  - 378
IS  - 5
SP  - 370
VL  - 57
DO  - 10.1007/s11204-020-09680-1
ER  - 

@article{
author = "Ćosić, Mladen and Šušić, Nenad and Folić, Radomir and Folić, Boris",
year = "2020",
abstract = "This paper formulates a mathematical model using the extrapolation of load-settlement curves with a rational function for analyzing the capacity of piles obtained from the static load test (SLT). In preliminary analyses, the extrapolation was based on the application of a number of mathematical functions that were gradually eliminated by iterative selection and filtering. The solution was obtained by extrapolation with a rational function. Using a rational function in the extrapolation of the load-settlement curve, a clearly identifiable part is obtained in which the asymptote is vertical, indicating the reached limit state of capacity in the soil and/or in the pile. The probabilistic analysis showed that no unique value for pile capacity was obtained, and that the spectrum of capacity values depends on the probability of occurrence of the corresponding event.",
publisher = "Springer, New York",
journal = "Soil Mechanics and Foundation Engineering",
title = "Model of Probabilistic Analysis of Pile Capacity Based on the Extrapolation of Load-Settlement Curves",
pages = "378-370",
number = "5",
volume = "57",
doi = "10.1007/s11204-020-09680-1"
}

Ćosić, M., Šušić, N., Folić, R.,& Folić, B.. (2020). Model of Probabilistic Analysis of Pile Capacity Based on the Extrapolation of Load-Settlement Curves. in Soil Mechanics and Foundation Engineering
Springer, New York., 57(5), 370-378.
https://doi.org/10.1007/s11204-020-09680-1

Ćosić M, Šušić N, Folić R, Folić B. Model of Probabilistic Analysis of Pile Capacity Based on the Extrapolation of Load-Settlement Curves. in Soil Mechanics and Foundation Engineering. 2020;57(5):370-378.
doi:10.1007/s11204-020-09680-1 .

Ćosić, Mladen, Šušić, Nenad, Folić, Radomir, Folić, Boris, "Model of Probabilistic Analysis of Pile Capacity Based on the Extrapolation of Load-Settlement Curves" in Soil Mechanics and Foundation Engineering, 57, no. 5 (2020):370-378,
https://doi.org/10.1007/s11204-020-09680-1 . .

TY  - JOUR
AU  - Santrac, Petar
AU  - Šušić, Nenad
AU  - Bajić, Zeljko
PY  - 2020
UR  - http://rims.institutims.rs/handle/123456789/384
AB  - The paper presents the determination of the elements of the pile stiffness matrix based on pile load test results, made for the needs of modernization of oil refinery for NIS in Pancevo. The tests were carried out on CFA and Franki piles system. However, only the results for CFA piles are shown in this paper. Load tests included axial, tension and horizontal loading. Bearing in mind the geomechanical composition of the terrain and the results of penetration testing (CPT), it has been concluded that the soil resistance can be approximated as a linear function by depth. By approximating the soil by the Winkler model and using the results of the horizontal pile load test, the equivalent gradient of the modulus of soil reaction for the work load level is determined analytically, and then, the pile flexibility coefficients for horizontal load. For vertical load, the coefficient of flexibility is determined directly on the basis of the load-settlement curve. Based on the flexibility coefficient, a matrix of flexibility and a stiffness matrix are determined. The effect of the pile interaction for horizontal and vertical loads was introduced in an approximate way, through the reduction of coefficients of the stiffness matrix. The entire process of determining the stiffness matrix of the pile is illustrated by practical example of a pile group connected by an ideal rigid cap.
PB  - Univ Osijek, Tech Fac, Slavonski Brod
T2  - Tehnicki Vjesnik-Technical Gazette
T1  - Determination of the Pile Stiffness Matrix Based on the Pile Load Test Results and the Effect of Pile Interaction
EP  - 2023
IS  - 6
SP  - 2016
VL  - 27
DO  - 10.17559/TV-20190722102256
ER  - 

@article{
author = "Santrac, Petar and Šušić, Nenad and Bajić, Zeljko",
year = "2020",
abstract = "The paper presents the determination of the elements of the pile stiffness matrix based on pile load test results, made for the needs of modernization of oil refinery for NIS in Pancevo. The tests were carried out on CFA and Franki piles system. However, only the results for CFA piles are shown in this paper. Load tests included axial, tension and horizontal loading. Bearing in mind the geomechanical composition of the terrain and the results of penetration testing (CPT), it has been concluded that the soil resistance can be approximated as a linear function by depth. By approximating the soil by the Winkler model and using the results of the horizontal pile load test, the equivalent gradient of the modulus of soil reaction for the work load level is determined analytically, and then, the pile flexibility coefficients for horizontal load. For vertical load, the coefficient of flexibility is determined directly on the basis of the load-settlement curve. Based on the flexibility coefficient, a matrix of flexibility and a stiffness matrix are determined. The effect of the pile interaction for horizontal and vertical loads was introduced in an approximate way, through the reduction of coefficients of the stiffness matrix. The entire process of determining the stiffness matrix of the pile is illustrated by practical example of a pile group connected by an ideal rigid cap.",
publisher = "Univ Osijek, Tech Fac, Slavonski Brod",
journal = "Tehnicki Vjesnik-Technical Gazette",
title = "Determination of the Pile Stiffness Matrix Based on the Pile Load Test Results and the Effect of Pile Interaction",
pages = "2023-2016",
number = "6",
volume = "27",
doi = "10.17559/TV-20190722102256"
}

Santrac, P., Šušić, N.,& Bajić, Z.. (2020). Determination of the Pile Stiffness Matrix Based on the Pile Load Test Results and the Effect of Pile Interaction. in Tehnicki Vjesnik-Technical Gazette
Univ Osijek, Tech Fac, Slavonski Brod., 27(6), 2016-2023.
https://doi.org/10.17559/TV-20190722102256

Santrac P, Šušić N, Bajić Z. Determination of the Pile Stiffness Matrix Based on the Pile Load Test Results and the Effect of Pile Interaction. in Tehnicki Vjesnik-Technical Gazette. 2020;27(6):2016-2023.
doi:10.17559/TV-20190722102256 .

Santrac, Petar, Šušić, Nenad, Bajić, Zeljko, "Determination of the Pile Stiffness Matrix Based on the Pile Load Test Results and the Effect of Pile Interaction" in Tehnicki Vjesnik-Technical Gazette, 27, no. 6 (2020):2016-2023,
https://doi.org/10.17559/TV-20190722102256 . .

TY  - JOUR
AU  - Ćosić, Mladen
AU  - Božić-Tomić, Kristina
AU  - Šušić, Nenad
PY  - 2019
UR  - http://rims.institutims.rs/handle/123456789/756
AB  - U radu su prikazani aspekti standardizacije i karakteristični primeri ispitivanja nosivosti šipova sa određenom analizom rezultata, pri čemu se metodologija ispitivanja oslanja na postojeće ASTM i sopstvene standarde, sopstvena znanja i iskustva, ali i na metodologiju ispitivanja prikazanu u naučnom radu Pile Integrity and Load Testing: Methodology and Classification. Ispitivanja šipova su sprovedena primenom sopstvene opreme sa licenciranim hardverima i softverima za test statičkog opterećenja šipa (SLT - Static Load Test) i test dinamičkog opterećenja šipa (DLT - Dynamic Load Test). Ukazano je na aspekte primene različitih oprema i metodologija ispitivanja u različitim situacijama. Takođe, ukazano je na potrebu izrade plana ispitivanja nosivosti šipova kada su u pitanju veliki i značajniji objekti.
T2  - Građevinski kalendar
T1  - Standardizacija, ispitivanje i analiza nosivosti šipova
EP  - 104
IS  - 51
SP  - 69
UR  - https://hdl.handle.net/21.15107/rcub_rims_756
ER  - 

@article{
author = "Ćosić, Mladen and Božić-Tomić, Kristina and Šušić, Nenad",
year = "2019",
abstract = "U radu su prikazani aspekti standardizacije i karakteristični primeri ispitivanja nosivosti šipova sa određenom analizom rezultata, pri čemu se metodologija ispitivanja oslanja na postojeće ASTM i sopstvene standarde, sopstvena znanja i iskustva, ali i na metodologiju ispitivanja prikazanu u naučnom radu Pile Integrity and Load Testing: Methodology and Classification. Ispitivanja šipova su sprovedena primenom sopstvene opreme sa licenciranim hardverima i softverima za test statičkog opterećenja šipa (SLT - Static Load Test) i test dinamičkog opterećenja šipa (DLT - Dynamic Load Test). Ukazano je na aspekte primene različitih oprema i metodologija ispitivanja u različitim situacijama. Takođe, ukazano je na potrebu izrade plana ispitivanja nosivosti šipova kada su u pitanju veliki i značajniji objekti.",
journal = "Građevinski kalendar",
title = "Standardizacija, ispitivanje i analiza nosivosti šipova",
pages = "104-69",
number = "51",
url = "https://hdl.handle.net/21.15107/rcub_rims_756"
}

Ćosić, M., Božić-Tomić, K.,& Šušić, N.. (2019). Standardizacija, ispitivanje i analiza nosivosti šipova. in Građevinski kalendar(51), 69-104.
https://hdl.handle.net/21.15107/rcub_rims_756

Ćosić M, Božić-Tomić K, Šušić N. Standardizacija, ispitivanje i analiza nosivosti šipova. in Građevinski kalendar. 2019;(51):69-104.
https://hdl.handle.net/21.15107/rcub_rims_756 .

Ćosić, Mladen, Božić-Tomić, Kristina, Šušić, Nenad, "Standardizacija, ispitivanje i analiza nosivosti šipova" in Građevinski kalendar, no. 51 (2019):69-104,
https://hdl.handle.net/21.15107/rcub_rims_756 .

TY  - JOUR
AU  - Ćosić, Mladen
AU  - Božić-Tomić, Kristina
AU  - Šušić, Nenad
PY  - 2019
UR  - http://rims.institutims.rs/handle/123456789/688
AB  - U radu su prikazani aspekti standardizacije i karakteristični primeri
ispitivanja integriteta šipova sa analizom rezultata, pri čemu se
metodologija ispitivanja oslanja na postojeće ASTM i sopstvene
standarde, ali i na metodologiju ispitivanja prikazanu u naučnim radovima
Pile Integrity and Load Testing: Methodology and Classification i Pile
Integrity Testing: Testing and Results Analysis. Ispitivanja šipova
sprovedena su primenom licenciranih oprema za test integriteta šipa sa
senzorom (SIT) i test integriteta šipa sa sondama (CSL). Ispitivanjima su
prikazane korektne i problematične situacije, koje se pojavljuju prilikom
analize integriteta šipova. Ukazano je na aspekte primene talasne teorije,
ali i na procesiranja signala. Takođe, posebno je skrenuta pažnja na
potrebu izrade plana ispitivanja integriteta šipova kod objekata s velikim
brojem šipova.
PB  - Savez inženjera i tehničara Srbije
T2  - Građevinski kalendar
T1  - Standardizacija, ispitivanje i analiza integriteta šipova
EP  - 68
IS  - 51
SP  - 34
UR  - https://hdl.handle.net/21.15107/rcub_rims_688
ER  - 

@article{
author = "Ćosić, Mladen and Božić-Tomić, Kristina and Šušić, Nenad",
year = "2019",
abstract = "U radu su prikazani aspekti standardizacije i karakteristični primeri
ispitivanja integriteta šipova sa analizom rezultata, pri čemu se
metodologija ispitivanja oslanja na postojeće ASTM i sopstvene
standarde, ali i na metodologiju ispitivanja prikazanu u naučnim radovima
Pile Integrity and Load Testing: Methodology and Classification i Pile
Integrity Testing: Testing and Results Analysis. Ispitivanja šipova
sprovedena su primenom licenciranih oprema za test integriteta šipa sa
senzorom (SIT) i test integriteta šipa sa sondama (CSL). Ispitivanjima su
prikazane korektne i problematične situacije, koje se pojavljuju prilikom
analize integriteta šipova. Ukazano je na aspekte primene talasne teorije,
ali i na procesiranja signala. Takođe, posebno je skrenuta pažnja na
potrebu izrade plana ispitivanja integriteta šipova kod objekata s velikim
brojem šipova.",
publisher = "Savez inženjera i tehničara Srbije",
journal = "Građevinski kalendar",
title = "Standardizacija, ispitivanje i analiza integriteta šipova",
pages = "68-34",
number = "51",
url = "https://hdl.handle.net/21.15107/rcub_rims_688"
}

Ćosić, M., Božić-Tomić, K.,& Šušić, N.. (2019). Standardizacija, ispitivanje i analiza integriteta šipova. in Građevinski kalendar
Savez inženjera i tehničara Srbije.(51), 34-68.
https://hdl.handle.net/21.15107/rcub_rims_688

Ćosić M, Božić-Tomić K, Šušić N. Standardizacija, ispitivanje i analiza integriteta šipova. in Građevinski kalendar. 2019;(51):34-68.
https://hdl.handle.net/21.15107/rcub_rims_688 .

Ćosić, Mladen, Božić-Tomić, Kristina, Šušić, Nenad, "Standardizacija, ispitivanje i analiza integriteta šipova" in Građevinski kalendar, no. 51 (2019):34-68,
https://hdl.handle.net/21.15107/rcub_rims_688 .

TY  - JOUR
AU  - Ćosić, Mladen
AU  - Božić-Tomić, Kristina
AU  - Šušić, Nenad
PY  - 2019
UR  - http://rims.institutims.rs/handle/123456789/375
AB  - U radu su prikazani karakteristični primeri ispitivanja integriteta šipova sa analizom rezultata, pri čemu se metodologija ispitivanja oslanja na postojeće ASTM standarde, ali i na metodologiju ispitivanja prikazanu u naučnom radu "Ispitivanje integriteta i nosivosti šipova: metodologija i klasifikacija", koji je publikovan u ovom časopisu. Ispitivanja šipova sprovedena su primenom licenciranih oprema za test integriteta šipa sa senzorom (SIT) i test integriteta šipa sa sondama (CSL). Ispitivanjima su prikazane korektne i problematične situacije, koje se pojavljuju prilikom analize integriteta šipova. Ukazano je na aspekte primene talasne teorije, ali i na procesiranja signala i numeričke analize. Takođe, posebno je skrenuta pažnja na potrebu izrade plana ispitivanja integriteta šipova kod objekata s velikim brojem šipova.
AB  - The paper presents typical examples of pile integrity testing and the results analysis, whereby the testing methodology relies on existing ASTM standards, as well as on the testing methodology presented in the scientific paper Pile Integrity and Load Testing: Methodology and Classification, published in this journal. The pile tests were conducted using licensed equipment for Sonic Integrity Test (SIT) and Crosshole Sonic Logging (CSL). The tests have shown the correct and problematic situations that arise when analyzing pile integrity. Some aspects of the wave theory implementation, but also of signal processing and numerical analysis have been indicated. Also, the need to develop a plan for testing the integrity of piles in structures with a large number of piles has been emphasized.
PB  - Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd
T2  - Građevinski materijali i konstrukcije
T1  - Ispitivanje integriteta šipova - testiranje i analiza rezultata
T1  - Pile integrity testing: Testing and results analysis
EP  - 59
IS  - 3
SP  - 39
VL  - 62
DO  - 10.5937/GRMK1903039C
ER  - 

@article{
author = "Ćosić, Mladen and Božić-Tomić, Kristina and Šušić, Nenad",
year = "2019",
abstract = "U radu su prikazani karakteristični primeri ispitivanja integriteta šipova sa analizom rezultata, pri čemu se metodologija ispitivanja oslanja na postojeće ASTM standarde, ali i na metodologiju ispitivanja prikazanu u naučnom radu "Ispitivanje integriteta i nosivosti šipova: metodologija i klasifikacija", koji je publikovan u ovom časopisu. Ispitivanja šipova sprovedena su primenom licenciranih oprema za test integriteta šipa sa senzorom (SIT) i test integriteta šipa sa sondama (CSL). Ispitivanjima su prikazane korektne i problematične situacije, koje se pojavljuju prilikom analize integriteta šipova. Ukazano je na aspekte primene talasne teorije, ali i na procesiranja signala i numeričke analize. Takođe, posebno je skrenuta pažnja na potrebu izrade plana ispitivanja integriteta šipova kod objekata s velikim brojem šipova., The paper presents typical examples of pile integrity testing and the results analysis, whereby the testing methodology relies on existing ASTM standards, as well as on the testing methodology presented in the scientific paper Pile Integrity and Load Testing: Methodology and Classification, published in this journal. The pile tests were conducted using licensed equipment for Sonic Integrity Test (SIT) and Crosshole Sonic Logging (CSL). The tests have shown the correct and problematic situations that arise when analyzing pile integrity. Some aspects of the wave theory implementation, but also of signal processing and numerical analysis have been indicated. Also, the need to develop a plan for testing the integrity of piles in structures with a large number of piles has been emphasized.",
publisher = "Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd",
journal = "Građevinski materijali i konstrukcije",
title = "Ispitivanje integriteta šipova - testiranje i analiza rezultata, Pile integrity testing: Testing and results analysis",
pages = "59-39",
number = "3",
volume = "62",
doi = "10.5937/GRMK1903039C"
}

Ćosić, M., Božić-Tomić, K.,& Šušić, N.. (2019). Ispitivanje integriteta šipova - testiranje i analiza rezultata. in Građevinski materijali i konstrukcije
Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd., 62(3), 39-59.
https://doi.org/10.5937/GRMK1903039C

Ćosić M, Božić-Tomić K, Šušić N. Ispitivanje integriteta šipova - testiranje i analiza rezultata. in Građevinski materijali i konstrukcije. 2019;62(3):39-59.
doi:10.5937/GRMK1903039C .

Ćosić, Mladen, Božić-Tomić, Kristina, Šušić, Nenad, "Ispitivanje integriteta šipova - testiranje i analiza rezultata" in Građevinski materijali i konstrukcije, 62, no. 3 (2019):39-59,
https://doi.org/10.5937/GRMK1903039C . .

TY  - JOUR
AU  - Ćosić, Mladen
AU  - Božić-Tomić, Kristina
AU  - Šušić, Nenad
PY  - 2019
UR  - http://rims.institutims.rs/handle/123456789/364
AB  - U radu su prikazane metodologija i klasifikacija ispitivanja integriteta i nosivosti šipova, u saglasnosti sa važećim inostranim standardima, ali i sa sopstvenim definisanim segmentima unapređivanja standarda i sopstvenim definicijama određenih ključnih elemenata. Klasifikacija je sprovedena po tipovima testova u kojima su jasno definisani: tok ispitivanja šipova, metode analize i obrade rezultata ispitivanja. Pored osnovne podele testova ispitivanja šipova na testove integriteta i testove nosivosti, dodatno je definisana i grupa testova kontrole bušotine kod bušenih šipova, s obzirom na to što je za pravilno formiranje bušotine, kada je reč o bušenim šipovima, neophodno prethodno ispuniti određene kvalitativno- kvantitativne kriterijume. Ovako prikazane metodologija i klasifikacija ispitivanja integriteta i nosivosti šipova prvenstveno služe za edukativne svrhe inženjera građevine i geotehnike koji se bave ovom problematikom, da dodatno donese novine na ovom polju ispitivanja i da dodatno pojasne sve elemente ispitivanja, budući da se u praksi vrlo često susreću protivrečna mišljenja i nesuglasice oko detalja ispitivanja.
AB  - The paper presents the methodology and classification of pile integrity and load testing, in compliance with current foreign standards, as well as our own defined segments of standard improvement and our own definitions of certain key elements. The classification has been conducted according to the test types which clearly define the pile testing process, analysis methods, and test results processing. Beside the basic division of pile testing to integrity tests and load tests, there is also an additionally defined group of shaft control tests in the case of bored piles, since for the proper shaft formation, when it comes to bored piles, certain qualitative-quantitative criteria must be fulfilled beforehand. Presented in this way, the methodology and classification of pile integrity and load tests serves, primarily, an educational purpose for civil and geotechnics engineers who deal with this issue, to additionally introduce innovations in this field of testing and clarify all the elements of the testing since contradictory opinions and disagreements regarding the testing details are quite common in practice.
PB  - Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd
T2  - Građevinski materijali i konstrukcije
T1  - Ispitivanje integriteta i nosivosti šipova - metodologija i klasifikacija
T1  - Pile integrity and load testing: Methodology and classification
EP  - 68
IS  - 1
SP  - 43
VL  - 62
DO  - 10.5937/GRMK1901043C
ER  - 

@article{
author = "Ćosić, Mladen and Božić-Tomić, Kristina and Šušić, Nenad",
year = "2019",
abstract = "U radu su prikazane metodologija i klasifikacija ispitivanja integriteta i nosivosti šipova, u saglasnosti sa važećim inostranim standardima, ali i sa sopstvenim definisanim segmentima unapređivanja standarda i sopstvenim definicijama određenih ključnih elemenata. Klasifikacija je sprovedena po tipovima testova u kojima su jasno definisani: tok ispitivanja šipova, metode analize i obrade rezultata ispitivanja. Pored osnovne podele testova ispitivanja šipova na testove integriteta i testove nosivosti, dodatno je definisana i grupa testova kontrole bušotine kod bušenih šipova, s obzirom na to što je za pravilno formiranje bušotine, kada je reč o bušenim šipovima, neophodno prethodno ispuniti određene kvalitativno- kvantitativne kriterijume. Ovako prikazane metodologija i klasifikacija ispitivanja integriteta i nosivosti šipova prvenstveno služe za edukativne svrhe inženjera građevine i geotehnike koji se bave ovom problematikom, da dodatno donese novine na ovom polju ispitivanja i da dodatno pojasne sve elemente ispitivanja, budući da se u praksi vrlo često susreću protivrečna mišljenja i nesuglasice oko detalja ispitivanja., The paper presents the methodology and classification of pile integrity and load testing, in compliance with current foreign standards, as well as our own defined segments of standard improvement and our own definitions of certain key elements. The classification has been conducted according to the test types which clearly define the pile testing process, analysis methods, and test results processing. Beside the basic division of pile testing to integrity tests and load tests, there is also an additionally defined group of shaft control tests in the case of bored piles, since for the proper shaft formation, when it comes to bored piles, certain qualitative-quantitative criteria must be fulfilled beforehand. Presented in this way, the methodology and classification of pile integrity and load tests serves, primarily, an educational purpose for civil and geotechnics engineers who deal with this issue, to additionally introduce innovations in this field of testing and clarify all the elements of the testing since contradictory opinions and disagreements regarding the testing details are quite common in practice.",
publisher = "Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd",
journal = "Građevinski materijali i konstrukcije",
title = "Ispitivanje integriteta i nosivosti šipova - metodologija i klasifikacija, Pile integrity and load testing: Methodology and classification",
pages = "68-43",
number = "1",
volume = "62",
doi = "10.5937/GRMK1901043C"
}

Ćosić, M., Božić-Tomić, K.,& Šušić, N.. (2019). Ispitivanje integriteta i nosivosti šipova - metodologija i klasifikacija. in Građevinski materijali i konstrukcije
Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd., 62(1), 43-68.
https://doi.org/10.5937/GRMK1901043C

Ćosić M, Božić-Tomić K, Šušić N. Ispitivanje integriteta i nosivosti šipova - metodologija i klasifikacija. in Građevinski materijali i konstrukcije. 2019;62(1):43-68.
doi:10.5937/GRMK1901043C .

Ćosić, Mladen, Božić-Tomić, Kristina, Šušić, Nenad, "Ispitivanje integriteta i nosivosti šipova - metodologija i klasifikacija" in Građevinski materijali i konstrukcije, 62, no. 1 (2019):43-68,
https://doi.org/10.5937/GRMK1901043C . .

TY  - JOUR
AU  - Đoković, Ksenija
AU  - Tosović, Simo
AU  - Janković, Ksenija
AU  - Šušić, Nenad
PY  - 2019
UR  - http://rims.institutims.rs/handle/123456789/368
AB  - The paper presents and analyzes the results of testing the properties of cement stabilized mixtures of reclaimed asphalt pavement (RAP) and crushed stone aggregate (CSA). Tests were carried out on reclaimed asphalt pavement and crushed stone aggregate mixtures with varying RAP content (0%, 20%, 40%, 60% and 80%), as well as with a varying addition of cement (3%, 5% and 7%). The purpose of these tests was to determine the optimal proportion of recycled asphalt pavement in a mixture with crushed stone aggregate, and the optimal addition of cement as a hydraulic binder. Furthermore, the aim was to determine physical-mechanical parameters: the indirect tensile strength (R-t) and the dynamic modulus of elasticity (E), which are applied in pavement design during the process of cold recycling. On the basis of the obtained values, categorization of the stabilized mixture was carried out according to the standard EN 14227-10: 2006, which continues to be applied in the design of pavements. The maximum proportion of recycled asphalt in the stabilized mixture was determined as being up to 60%; the stabilized mixture was categorized into the "T1" and "T2" categories - gravelly soils.
PB  - Univ Osijek, Tech Fac, Slavonski Brod
T2  - Tehnički Vjesnik-Technical Gazette
T1  - Physical-Mechanical Properties of Cement Stabilized RAP/Crushed Stone Aggregate Mixtures
EP  - 390
IS  - 2
SP  - 385
VL  - 26
DO  - 10.17559/TV-20180309114804
ER  - 

@article{
author = "Đoković, Ksenija and Tosović, Simo and Janković, Ksenija and Šušić, Nenad",
year = "2019",
abstract = "The paper presents and analyzes the results of testing the properties of cement stabilized mixtures of reclaimed asphalt pavement (RAP) and crushed stone aggregate (CSA). Tests were carried out on reclaimed asphalt pavement and crushed stone aggregate mixtures with varying RAP content (0%, 20%, 40%, 60% and 80%), as well as with a varying addition of cement (3%, 5% and 7%). The purpose of these tests was to determine the optimal proportion of recycled asphalt pavement in a mixture with crushed stone aggregate, and the optimal addition of cement as a hydraulic binder. Furthermore, the aim was to determine physical-mechanical parameters: the indirect tensile strength (R-t) and the dynamic modulus of elasticity (E), which are applied in pavement design during the process of cold recycling. On the basis of the obtained values, categorization of the stabilized mixture was carried out according to the standard EN 14227-10: 2006, which continues to be applied in the design of pavements. The maximum proportion of recycled asphalt in the stabilized mixture was determined as being up to 60%; the stabilized mixture was categorized into the "T1" and "T2" categories - gravelly soils.",
publisher = "Univ Osijek, Tech Fac, Slavonski Brod",
journal = "Tehnički Vjesnik-Technical Gazette",
title = "Physical-Mechanical Properties of Cement Stabilized RAP/Crushed Stone Aggregate Mixtures",
pages = "390-385",
number = "2",
volume = "26",
doi = "10.17559/TV-20180309114804"
}

Đoković, K., Tosović, S., Janković, K.,& Šušić, N.. (2019). Physical-Mechanical Properties of Cement Stabilized RAP/Crushed Stone Aggregate Mixtures. in Tehnički Vjesnik-Technical Gazette
Univ Osijek, Tech Fac, Slavonski Brod., 26(2), 385-390.
https://doi.org/10.17559/TV-20180309114804

Đoković K, Tosović S, Janković K, Šušić N. Physical-Mechanical Properties of Cement Stabilized RAP/Crushed Stone Aggregate Mixtures. in Tehnički Vjesnik-Technical Gazette. 2019;26(2):385-390.
doi:10.17559/TV-20180309114804 .

Đoković, Ksenija, Tosović, Simo, Janković, Ksenija, Šušić, Nenad, "Physical-Mechanical Properties of Cement Stabilized RAP/Crushed Stone Aggregate Mixtures" in Tehnički Vjesnik-Technical Gazette, 26, no. 2 (2019):385-390,
https://doi.org/10.17559/TV-20180309114804 . .

TY  - CONF
AU  - Ćosić, Mladen
AU  - Brčić, Stanko
AU  - Šušić, Nenad
AU  - Folić, Radomir
AU  - Božić-Tomić, Kristina
PY  - 2018
UR  - http://rims.institutims.rs/handle/123456789/748
AB  - The paper is presenting a mathematical formulation of an originally developed ground motion record surface (GMRS) and response spectra surface (RSS) for the presentation of 2D seismic ground motion records (GMR) and the corresponding response spectra (RS), respectively. These surfaces are constructed by transformation from 2D polar coordinate system to a 3D cylindrical coordinate system and then to the 3D orthogonal coordinate system. The principle of application of three orthogonal coordinates for each discrete value is used in order to achieve easy manipulation and interpolation of spatial surface. Scaling of accelerograms was carried out using two procedures: the Least Square Method (LSM) and Spectral Matching (SM).
PB  - Association of Civil Engineers of Serbia, Kraljevo
C3  - 6th International Conference of Earthquake Engineering and Engineering Seismology, Kraljevo, Serbia
T1  - Development of ground motion record surface and response spectra surface
EP  - 354
SP  - 343
UR  - https://hdl.handle.net/21.15107/rcub_rims_748
ER  - 

@conference{
author = "Ćosić, Mladen and Brčić, Stanko and Šušić, Nenad and Folić, Radomir and Božić-Tomić, Kristina",
year = "2018",
abstract = "The paper is presenting a mathematical formulation of an originally developed ground motion record surface (GMRS) and response spectra surface (RSS) for the presentation of 2D seismic ground motion records (GMR) and the corresponding response spectra (RS), respectively. These surfaces are constructed by transformation from 2D polar coordinate system to a 3D cylindrical coordinate system and then to the 3D orthogonal coordinate system. The principle of application of three orthogonal coordinates for each discrete value is used in order to achieve easy manipulation and interpolation of spatial surface. Scaling of accelerograms was carried out using two procedures: the Least Square Method (LSM) and Spectral Matching (SM).",
publisher = "Association of Civil Engineers of Serbia, Kraljevo",
journal = "6th International Conference of Earthquake Engineering and Engineering Seismology, Kraljevo, Serbia",
title = "Development of ground motion record surface and response spectra surface",
pages = "354-343",
url = "https://hdl.handle.net/21.15107/rcub_rims_748"
}

Ćosić, M., Brčić, S., Šušić, N., Folić, R.,& Božić-Tomić, K.. (2018). Development of ground motion record surface and response spectra surface. in 6th International Conference of Earthquake Engineering and Engineering Seismology, Kraljevo, Serbia
Association of Civil Engineers of Serbia, Kraljevo., 343-354.
https://hdl.handle.net/21.15107/rcub_rims_748

Ćosić M, Brčić S, Šušić N, Folić R, Božić-Tomić K. Development of ground motion record surface and response spectra surface. in 6th International Conference of Earthquake Engineering and Engineering Seismology, Kraljevo, Serbia. 2018;:343-354.
https://hdl.handle.net/21.15107/rcub_rims_748 .

Ćosić, Mladen, Brčić, Stanko, Šušić, Nenad, Folić, Radomir, Božić-Tomić, Kristina, "Development of ground motion record surface and response spectra surface" in 6th International Conference of Earthquake Engineering and Engineering Seismology, Kraljevo, Serbia (2018):343-354,
https://hdl.handle.net/21.15107/rcub_rims_748 .

TY  - PAT
AU  - Prica, Marko
AU  - Šušić, Nenad
AU  - Božić-Tomić, Kristina
PY  - 2018
UR  - http://rims.institutims.rs/handle/123456789/687
T2  - Registar malih patenata, Zavod za intelektualnu svojinu, Sektor za patente, Republika Srbija; Glasnik intelektualne svojine
T1  - Cevasti elementi za sanaciju klizišta
IS  - 1
UR  - https://hdl.handle.net/21.15107/rcub_rims_687
ER  - 

@misc{
author = "Prica, Marko and Šušić, Nenad and Božić-Tomić, Kristina",
year = "2018",
journal = "Registar malih patenata, Zavod za intelektualnu svojinu, Sektor za patente, Republika Srbija; Glasnik intelektualne svojine",
title = "Cevasti elementi za sanaciju klizišta",
number = "1",
url = "https://hdl.handle.net/21.15107/rcub_rims_687"
}

Prica, M., Šušić, N.,& Božić-Tomić, K.. (2018). Cevasti elementi za sanaciju klizišta. in Registar malih patenata, Zavod za intelektualnu svojinu, Sektor za patente, Republika Srbija; Glasnik intelektualne svojine(1).
https://hdl.handle.net/21.15107/rcub_rims_687

Prica M, Šušić N, Božić-Tomić K. Cevasti elementi za sanaciju klizišta. in Registar malih patenata, Zavod za intelektualnu svojinu, Sektor za patente, Republika Srbija; Glasnik intelektualne svojine. 2018;(1).
https://hdl.handle.net/21.15107/rcub_rims_687 .

Prica, Marko, Šušić, Nenad, Božić-Tomić, Kristina, "Cevasti elementi za sanaciju klizišta" in Registar malih patenata, Zavod za intelektualnu svojinu, Sektor za patente, Republika Srbija; Glasnik intelektualne svojine, no. 1 (2018),
https://hdl.handle.net/21.15107/rcub_rims_687 .

TY  - JOUR
AU  - Božić-Tomić, Kristina
AU  - Šušić, Nenad
AU  - Uljarević, Mato
PY  - 2018
UR  - http://rims.institutims.rs/handle/123456789/331
AB  - Na osnovu analize mnogih naučnih radova, autori su dali prikaz sopstvene originalne sistematizacije analitičkih i numeričkih metoda proračuna stabilnosti klizišta, pri čemu mnoge od njih tek treba dodatno da se unaprede, implementiraju i testiraju na kompleksnim 3D modelima klizišta. Metode proračuna stabilnosti klizišta klasifikovane su u pet grupa: analitičke jednokoračne, analitičke višekoračne (iteracije kliznih površi), numeričke višekoračne (iteracije kliznih površi), numeričke inkrementalno-iterativne (nelinearne) analize i numeričke inkrementalno-iterativne (nelinearne) analize, uz primenu numeričke integracije u vremenskom domenu. Primenom sprovedene sistematizacije metoda proračuna stabilnosti klizišta, može se vrlo efikasno razmotriti koji je tip metode optimalan za analizu klizišta i koji tip metode je potrebno koristiti u fazi preliminarnih i finalnih analiza za naučna istraživanja i stručne projekte.
AB  - According to the analysis of a large number of scientific papers, the authors of the paper presented their own original systematization of the analytical and numerical methods of landslide stability calculation, with a large part of them still to be further improved, implemented and tested on complex 3D landslide models. Methods for calculating the stability of the landslide are classified into five groups: analytical single-step, analytical multi-step (iterations of sliding surfaces), numerical multi-step (iterations of sliding surfaces), numerical incremental-iterative (nonlinear) analysis and numerical incremental-iterative (nonlinear) analysis, applying numerical integration in the time domain. By using the systematization method of calculating the stability of the landslide it can be very effective to consider which type of method is optimal for landslide analysis and which type of method should be considered in the phase of preliminary and final analysis for scientific research and expert projects.
PB  - Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd
T2  - Građevinski materijali i konstrukcije
T1  - Sistematizacija analitičkih i numeričkih metoda proračuna stabilnosti klizišta
T1  - The systematization of analytical and numerical methods of landslide stability calculation
EP  - 160
IS  - 1
SP  - 129
VL  - 61
DO  - 10.5937/GRMK1801129B
ER  - 

@article{
author = "Božić-Tomić, Kristina and Šušić, Nenad and Uljarević, Mato",
year = "2018",
abstract = "Na osnovu analize mnogih naučnih radova, autori su dali prikaz sopstvene originalne sistematizacije analitičkih i numeričkih metoda proračuna stabilnosti klizišta, pri čemu mnoge od njih tek treba dodatno da se unaprede, implementiraju i testiraju na kompleksnim 3D modelima klizišta. Metode proračuna stabilnosti klizišta klasifikovane su u pet grupa: analitičke jednokoračne, analitičke višekoračne (iteracije kliznih površi), numeričke višekoračne (iteracije kliznih površi), numeričke inkrementalno-iterativne (nelinearne) analize i numeričke inkrementalno-iterativne (nelinearne) analize, uz primenu numeričke integracije u vremenskom domenu. Primenom sprovedene sistematizacije metoda proračuna stabilnosti klizišta, može se vrlo efikasno razmotriti koji je tip metode optimalan za analizu klizišta i koji tip metode je potrebno koristiti u fazi preliminarnih i finalnih analiza za naučna istraživanja i stručne projekte., According to the analysis of a large number of scientific papers, the authors of the paper presented their own original systematization of the analytical and numerical methods of landslide stability calculation, with a large part of them still to be further improved, implemented and tested on complex 3D landslide models. Methods for calculating the stability of the landslide are classified into five groups: analytical single-step, analytical multi-step (iterations of sliding surfaces), numerical multi-step (iterations of sliding surfaces), numerical incremental-iterative (nonlinear) analysis and numerical incremental-iterative (nonlinear) analysis, applying numerical integration in the time domain. By using the systematization method of calculating the stability of the landslide it can be very effective to consider which type of method is optimal for landslide analysis and which type of method should be considered in the phase of preliminary and final analysis for scientific research and expert projects.",
publisher = "Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd",
journal = "Građevinski materijali i konstrukcije",
title = "Sistematizacija analitičkih i numeričkih metoda proračuna stabilnosti klizišta, The systematization of analytical and numerical methods of landslide stability calculation",
pages = "160-129",
number = "1",
volume = "61",
doi = "10.5937/GRMK1801129B"
}

Božić-Tomić, K., Šušić, N.,& Uljarević, M.. (2018). Sistematizacija analitičkih i numeričkih metoda proračuna stabilnosti klizišta. in Građevinski materijali i konstrukcije
Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd., 61(1), 129-160.
https://doi.org/10.5937/GRMK1801129B

Božić-Tomić K, Šušić N, Uljarević M. Sistematizacija analitičkih i numeričkih metoda proračuna stabilnosti klizišta. in Građevinski materijali i konstrukcije. 2018;61(1):129-160.
doi:10.5937/GRMK1801129B .

Božić-Tomić, Kristina, Šušić, Nenad, Uljarević, Mato, "Sistematizacija analitičkih i numeričkih metoda proračuna stabilnosti klizišta" in Građevinski materijali i konstrukcije, 61, no. 1 (2018):129-160,
https://doi.org/10.5937/GRMK1801129B . .

TY  - CONF
AU  - Folić, Boris
AU  - Šušić, Nenad
AU  - Ćosić, Mladen
PY  - 2017
UR  - http://rims.institutims.rs/handle/123456789/746
AB  - The paper presents the possibilities of determing functions of some characteristic parameters of loess soil. The loess soil is of Eolian origin, its formation is related to the Ice Age, it is classified as dusty-sandy-clayey soil, and very large extent of results are possible depending on humidity, location, porosity, anisotropy, etc. The problem of loess soilis is very complex and this is an attempt to restore partially neglected research by Milović, Stevanović and others with the classification of characteristics, which can only be used with a certain probability.
PB  - Savez građevinskih inženjera Srbije SGIS
PB  - Association of Civil Engineers of Serbia
PB  - Institut IMS A.D. Beograd
PB  - SET d.o.o. Šabac
PB  - Srpsko društvo za mehaniku tla i geotehničko inženjerstvo
C3  - 7th International Conference Geotechnics in Civil Engineering, Šabac, Serbia
T1  - The Use of Computers in Determining the Parameters of the Functions for Loess Soil
EP  - 164
SP  - 155
UR  - https://hdl.handle.net/21.15107/rcub_rims_746
ER  - 

@conference{
author = "Folić, Boris and Šušić, Nenad and Ćosić, Mladen",
year = "2017",
abstract = "The paper presents the possibilities of determing functions of some characteristic parameters of loess soil. The loess soil is of Eolian origin, its formation is related to the Ice Age, it is classified as dusty-sandy-clayey soil, and very large extent of results are possible depending on humidity, location, porosity, anisotropy, etc. The problem of loess soilis is very complex and this is an attempt to restore partially neglected research by Milović, Stevanović and others with the classification of characteristics, which can only be used with a certain probability.",
publisher = "Savez građevinskih inženjera Srbije SGIS, Association of Civil Engineers of Serbia, Institut IMS A.D. Beograd, SET d.o.o. Šabac, Srpsko društvo za mehaniku tla i geotehničko inženjerstvo",
journal = "7th International Conference Geotechnics in Civil Engineering, Šabac, Serbia",
title = "The Use of Computers in Determining the Parameters of the Functions for Loess Soil",
pages = "164-155",
url = "https://hdl.handle.net/21.15107/rcub_rims_746"
}

Folić, B., Šušić, N.,& Ćosić, M.. (2017). The Use of Computers in Determining the Parameters of the Functions for Loess Soil. in 7th International Conference Geotechnics in Civil Engineering, Šabac, Serbia
Savez građevinskih inženjera Srbije SGIS., 155-164.
https://hdl.handle.net/21.15107/rcub_rims_746

Folić B, Šušić N, Ćosić M. The Use of Computers in Determining the Parameters of the Functions for Loess Soil. in 7th International Conference Geotechnics in Civil Engineering, Šabac, Serbia. 2017;:155-164.
https://hdl.handle.net/21.15107/rcub_rims_746 .

Folić, Boris, Šušić, Nenad, Ćosić, Mladen, "The Use of Computers in Determining the Parameters of the Functions for Loess Soil" in 7th International Conference Geotechnics in Civil Engineering, Šabac, Serbia (2017):155-164,
https://hdl.handle.net/21.15107/rcub_rims_746 .

TY  - JOUR
AU  - Janković, Ksenija
AU  - Šušić, Nenad
AU  - Stojanović, Marko
AU  - Bojović, Dragan
AU  - Lončar, Ljiljana
PY  - 2017
UR  - http://rims.institutims.rs/handle/123456789/325
AB  - In order to examine the differences in chemical composition and the possibility of using mine tailings in mortar and concrete production, samples were taken from the landfill and directly from the production. Tailings test results showed no pozzolanic activity and that its application in concrete can be only a partial replacement of aggregate. This paper presents the possibility of using tailings in self-compacting concrete made with Portland cement and sulphate resistant cement. Concrete specimens in which the aggregate fraction 0/4 mm was replaced with 10 and 20 % of tailings were examined. The resistance to freezing and thawing with and without de-icing salts is used as an indicator of concrete durability.
PB  - Univ Osijek, Tech Fac, Slavonski Brod
T2  - Tehnicki Vjesnik-Technical Gazette
T1  - The influence of tailings and cement type on durability properties of self-compacting concrete
EP  - 962
IS  - 3
SP  - 957
VL  - 24
DO  - 10.17559/TV-20160304113800
ER  - 

@article{
author = "Janković, Ksenija and Šušić, Nenad and Stojanović, Marko and Bojović, Dragan and Lončar, Ljiljana",
year = "2017",
abstract = "In order to examine the differences in chemical composition and the possibility of using mine tailings in mortar and concrete production, samples were taken from the landfill and directly from the production. Tailings test results showed no pozzolanic activity and that its application in concrete can be only a partial replacement of aggregate. This paper presents the possibility of using tailings in self-compacting concrete made with Portland cement and sulphate resistant cement. Concrete specimens in which the aggregate fraction 0/4 mm was replaced with 10 and 20 % of tailings were examined. The resistance to freezing and thawing with and without de-icing salts is used as an indicator of concrete durability.",
publisher = "Univ Osijek, Tech Fac, Slavonski Brod",
journal = "Tehnicki Vjesnik-Technical Gazette",
title = "The influence of tailings and cement type on durability properties of self-compacting concrete",
pages = "962-957",
number = "3",
volume = "24",
doi = "10.17559/TV-20160304113800"
}

Janković, K., Šušić, N., Stojanović, M., Bojović, D.,& Lončar, L.. (2017). The influence of tailings and cement type on durability properties of self-compacting concrete. in Tehnicki Vjesnik-Technical Gazette
Univ Osijek, Tech Fac, Slavonski Brod., 24(3), 957-962.
https://doi.org/10.17559/TV-20160304113800

Janković K, Šušić N, Stojanović M, Bojović D, Lončar L. The influence of tailings and cement type on durability properties of self-compacting concrete. in Tehnicki Vjesnik-Technical Gazette. 2017;24(3):957-962.
doi:10.17559/TV-20160304113800 .

Janković, Ksenija, Šušić, Nenad, Stojanović, Marko, Bojović, Dragan, Lončar, Ljiljana, "The influence of tailings and cement type on durability properties of self-compacting concrete" in Tehnicki Vjesnik-Technical Gazette, 24, no. 3 (2017):957-962,
https://doi.org/10.17559/TV-20160304113800 . .

TY  - CONF
AU  - Ćosić, Mladen
AU  - Brčić, Stanko
AU  - Folić, Radomir
AU  - Šušić, Nenad
PY  - 2016
UR  - http://rims.institutims.rs/handle/123456789/745
AB  - The paper presents the original developed software Quake Nonlin for
performance-based seismic analysis of 3D structural models. Software Nonlin
Quake consists of several independent compatible softwares that implements:
create a database of two componential ground motion records (GMR), generation
and processing of multicomponential GMR, creating incomplete and complete
nonstationary artificial accelerograms, deterministic and probabilistic seismic
hazard analysis, generation and processing of multicomponential response
spectras, analysis of design parameters, processing of pushover curves and
surfaces, calculation based on hybrid incremental nonlinear static-dynamic
analysis, target displacement analysis, analysis and scaling of response spectras
and analysis of target displacement envelope. For four considered methods for
analysis of system performances: nonlinear static pushover analysis (NSPA),
incremental nonlinear dynamic analysis (INDA), incremental dynamic analysis
(IDA) and hybrid incremental nonlinear static-dynamic analysis (HINSDA), flow
charts are shown.
PB  - Savez građevinskih inženjera Srbije SGIS
C3  - 5th International Conference of Earthquake Engineering and Engineering Seismology, Sremski Karlovci, Serbia
T1  - Nonlin Quake: Expert System for Performance-Based Analysis of Structures
EP  - 316
SP  - 303
UR  - https://hdl.handle.net/21.15107/rcub_rims_745
ER  - 

@conference{
author = "Ćosić, Mladen and Brčić, Stanko and Folić, Radomir and Šušić, Nenad",
year = "2016",
abstract = "The paper presents the original developed software Quake Nonlin for
performance-based seismic analysis of 3D structural models. Software Nonlin
Quake consists of several independent compatible softwares that implements:
create a database of two componential ground motion records (GMR), generation
and processing of multicomponential GMR, creating incomplete and complete
nonstationary artificial accelerograms, deterministic and probabilistic seismic
hazard analysis, generation and processing of multicomponential response
spectras, analysis of design parameters, processing of pushover curves and
surfaces, calculation based on hybrid incremental nonlinear static-dynamic
analysis, target displacement analysis, analysis and scaling of response spectras
and analysis of target displacement envelope. For four considered methods for
analysis of system performances: nonlinear static pushover analysis (NSPA),
incremental nonlinear dynamic analysis (INDA), incremental dynamic analysis
(IDA) and hybrid incremental nonlinear static-dynamic analysis (HINSDA), flow
charts are shown.",
publisher = "Savez građevinskih inženjera Srbije SGIS",
journal = "5th International Conference of Earthquake Engineering and Engineering Seismology, Sremski Karlovci, Serbia",
title = "Nonlin Quake: Expert System for Performance-Based Analysis of Structures",
pages = "316-303",
url = "https://hdl.handle.net/21.15107/rcub_rims_745"
}

Ćosić, M., Brčić, S., Folić, R.,& Šušić, N.. (2016). Nonlin Quake: Expert System for Performance-Based Analysis of Structures. in 5th International Conference of Earthquake Engineering and Engineering Seismology, Sremski Karlovci, Serbia
Savez građevinskih inženjera Srbije SGIS., 303-316.
https://hdl.handle.net/21.15107/rcub_rims_745

Ćosić M, Brčić S, Folić R, Šušić N. Nonlin Quake: Expert System for Performance-Based Analysis of Structures. in 5th International Conference of Earthquake Engineering and Engineering Seismology, Sremski Karlovci, Serbia. 2016;:303-316.
https://hdl.handle.net/21.15107/rcub_rims_745 .

Ćosić, Mladen, Brčić, Stanko, Folić, Radomir, Šušić, Nenad, "Nonlin Quake: Expert System for Performance-Based Analysis of Structures" in 5th International Conference of Earthquake Engineering and Engineering Seismology, Sremski Karlovci, Serbia (2016):303-316,
https://hdl.handle.net/21.15107/rcub_rims_745 .