TY  - CONF
AU  - Mirković-Marjanović, Milica
AU  - Ilić, Snežana
AU  - Kijanović, Aleksandar
AU  - Todorović, Goran
AU  - Gospavić, Radovan
PY  - 2022
UR  - http://rims.institutims.rs/handle/123456789/436
AB  - Testing the clay hollow-brick masonry non-load-bearing wall helps us to understand the behaviour of this type of wall during a fire. It is important to know the fire resistance of hollow brick walls so that we can prevent the fire from spreading to other rooms. In this paper, the experimental analysis of fire resistance of non-load-bearing wall with dimensions 3000 mm x 3000 mm thickness 200 mm were presented. The wall was made from clay hollow-brick masonry blocks with dimensions 500 mm x 200 mm x 249 mm (L x D x H) with mortar on both side of wall of thickness 15 mm. The wall was exposed to a standard fire test according to SRPS EN 1363-1:2014. The temperatures on the unexposed side of the wall were measured in thirteen positions with thermocouples (K – type) according to the national standard SRPS EN 1364-1: 2014, and at the junction between mortar and clay hollow-brick. Deflection of the wall in five places was measured also. Obtained results depending on the time of reaching the critical temperature during the fire test were presented.
C3  - Proceeding of the 8th International Conference "Civil engineering-science and practice", Kolašin
T1  - Experimental analysis of fire resistance of cly hollow-brick masonsry non-load bearing wall
UR  - https://hdl.handle.net/21.15107/rcub_rims_436
ER  - 

@conference{
author = "Mirković-Marjanović, Milica and Ilić, Snežana and Kijanović, Aleksandar and Todorović, Goran and Gospavić, Radovan",
year = "2022",
abstract = "Testing the clay hollow-brick masonry non-load-bearing wall helps us to understand the behaviour of this type of wall during a fire. It is important to know the fire resistance of hollow brick walls so that we can prevent the fire from spreading to other rooms. In this paper, the experimental analysis of fire resistance of non-load-bearing wall with dimensions 3000 mm x 3000 mm thickness 200 mm were presented. The wall was made from clay hollow-brick masonry blocks with dimensions 500 mm x 200 mm x 249 mm (L x D x H) with mortar on both side of wall of thickness 15 mm. The wall was exposed to a standard fire test according to SRPS EN 1363-1:2014. The temperatures on the unexposed side of the wall were measured in thirteen positions with thermocouples (K – type) according to the national standard SRPS EN 1364-1: 2014, and at the junction between mortar and clay hollow-brick. Deflection of the wall in five places was measured also. Obtained results depending on the time of reaching the critical temperature during the fire test were presented.",
journal = "Proceeding of the 8th International Conference "Civil engineering-science and practice", Kolašin",
title = "Experimental analysis of fire resistance of cly hollow-brick masonsry non-load bearing wall",
url = "https://hdl.handle.net/21.15107/rcub_rims_436"
}

Mirković-Marjanović, M., Ilić, S., Kijanović, A., Todorović, G.,& Gospavić, R.. (2022). Experimental analysis of fire resistance of cly hollow-brick masonsry non-load bearing wall. in Proceeding of the 8th International Conference "Civil engineering-science and practice", Kolašin.
https://hdl.handle.net/21.15107/rcub_rims_436

Mirković-Marjanović M, Ilić S, Kijanović A, Todorović G, Gospavić R. Experimental analysis of fire resistance of cly hollow-brick masonsry non-load bearing wall. in Proceeding of the 8th International Conference "Civil engineering-science and practice", Kolašin. 2022;.
https://hdl.handle.net/21.15107/rcub_rims_436 .

Mirković-Marjanović, Milica, Ilić, Snežana, Kijanović, Aleksandar, Todorović, Goran, Gospavić, Radovan, "Experimental analysis of fire resistance of cly hollow-brick masonsry non-load bearing wall" in Proceeding of the 8th International Conference "Civil engineering-science and practice", Kolašin (2022),
https://hdl.handle.net/21.15107/rcub_rims_436 .

TY  - JOUR
AU  - Dević, Snežana
AU  - Arsenović, Milica
AU  - Živančević, Branko
PY  - 2009
UR  - http://rims.institutims.rs/handle/123456789/103
AB  - Particle size is the effective diameter of a particle as measured by sedimentation, sieving, or micrometric methods. Particle sizes are expressed as classes with specific, effective diameter class limits. The main classes are clay ( lt 2 μm), silt (2-20 μm) dust fragments, and sand (>20 #). The physical behaviour of a soil is influenced by the size and percentage composition of the size classes. Particle size is important for most soil interpretations, for the determination of soil hydrologic qualities, and for soil classification. The physical properties of soil are influenced by its total sand content and the percentage amounts of the individual sand fractions occurring in it. Due to their size, sand particles have a direct impact on the porosity of the clay. This influences other properties, such as saturated hydraulic conductivity, available water capacity, water intake rates, aeration, and compressibility related to plant growth and engineering uses. Soil properties and application depend on many factors such as: raw clay row, mineralogical constitution, quantity and category of accessory minerals, purity and chemical composition, as well as physical and thermal properties. The aim of this study is to determine the mineral and chemical composition of 0.063 mm sieve residues at a few localities in Serbia. Depending on the quality, clay is used as a raw material in the brick or ceramic industry. The sand content is measured in the laboratory by the wet sieving method. The mineralogical composition of the samples is determined using optical and XRF methods. Certain fragments are examined more deeply by the methods used. The results obtained enabled raw clay samples from 4 different locations in Serbia to be characterized as the basis for a more detailed and profound soil evaluation.
T2  - InterCeram: International Ceramic Review
T1  - Characterization of serbian raw clay materials based on >0.63 mm sieve residues
EP  - 218
IS  - 4
SP  - 216
VL  - 58
UR  - https://hdl.handle.net/21.15107/rcub_rims_103
ER  - 

@article{
author = "Dević, Snežana and Arsenović, Milica and Živančević, Branko",
year = "2009",
abstract = "Particle size is the effective diameter of a particle as measured by sedimentation, sieving, or micrometric methods. Particle sizes are expressed as classes with specific, effective diameter class limits. The main classes are clay ( lt 2 μm), silt (2-20 μm) dust fragments, and sand (>20 #). The physical behaviour of a soil is influenced by the size and percentage composition of the size classes. Particle size is important for most soil interpretations, for the determination of soil hydrologic qualities, and for soil classification. The physical properties of soil are influenced by its total sand content and the percentage amounts of the individual sand fractions occurring in it. Due to their size, sand particles have a direct impact on the porosity of the clay. This influences other properties, such as saturated hydraulic conductivity, available water capacity, water intake rates, aeration, and compressibility related to plant growth and engineering uses. Soil properties and application depend on many factors such as: raw clay row, mineralogical constitution, quantity and category of accessory minerals, purity and chemical composition, as well as physical and thermal properties. The aim of this study is to determine the mineral and chemical composition of 0.063 mm sieve residues at a few localities in Serbia. Depending on the quality, clay is used as a raw material in the brick or ceramic industry. The sand content is measured in the laboratory by the wet sieving method. The mineralogical composition of the samples is determined using optical and XRF methods. Certain fragments are examined more deeply by the methods used. The results obtained enabled raw clay samples from 4 different locations in Serbia to be characterized as the basis for a more detailed and profound soil evaluation.",
journal = "InterCeram: International Ceramic Review",
title = "Characterization of serbian raw clay materials based on >0.63 mm sieve residues",
pages = "218-216",
number = "4",
volume = "58",
url = "https://hdl.handle.net/21.15107/rcub_rims_103"
}

Dević, S., Arsenović, M.,& Živančević, B.. (2009). Characterization of serbian raw clay materials based on >0.63 mm sieve residues. in InterCeram: International Ceramic Review, 58(4), 216-218.
https://hdl.handle.net/21.15107/rcub_rims_103

Dević S, Arsenović M, Živančević B. Characterization of serbian raw clay materials based on >0.63 mm sieve residues. in InterCeram: International Ceramic Review. 2009;58(4):216-218.
https://hdl.handle.net/21.15107/rcub_rims_103 .

Dević, Snežana, Arsenović, Milica, Živančević, Branko, "Characterization of serbian raw clay materials based on >0.63 mm sieve residues" in InterCeram: International Ceramic Review, 58, no. 4 (2009):216-218,
https://hdl.handle.net/21.15107/rcub_rims_103 .

TY  - JOUR
AU  - Dević, Snežana
AU  - Arsenović, Milica
AU  - Živančević, Branko
PY  - 2009
UR  - http://rims.institutims.rs/handle/123456789/92
AB  - Particle size is the effective diameter of a particle as measured by sedimentation, sieving, or micrometric methods. Particle sizes are expressed as classes with specific, effective diameter class limits. The broad classes are clay ( lt  2 mu m), silt (2 - 20 mu m dust fragments), and sand (over 20 pm). The physical behavior of a soil is influenced by the size and percentage composition of the size classes. Particle size is important for most soil interpretations, for determination of soil hydrologic qualities, and for soil classification. Physical properties of the soil are influenced by the amounts of total sand and of the various sand fractions present in the soil. Sand particles, because of their size, have a direct impact on the porosity of the clay. This influences other properties, such as saturated hydraulic conductivity, available water capacity, water intake rates, aeration, and compressibilily related to plant growth and engineering uses. Soil properties and application depend on many factors such as: raw clay row, mineralogical constitution quantity and category of accessory minerals, purity and chemical composition, as well as physical and thermal properties. The aim of this study is to determine mineral and chemical composition of 0.063mm sieve residues at a few localities in Serbia. Depending on a quality, clay is used as a raw material in brick or ceramic industry. Sand content is measured in the laboratory by the wet sieving method. Mineralogical composition of samples is determined using optical and XRF methods. Certain fragments are deeper examined with methods used. Results obtained enabled raw clay samples characterization at 4 different locations in Serbia. This way more soil profound evaluation is gained.
PB  - American Ceramic Society
T2  - Developments in Strategic Materials
T1  - Characterization of raw clay materials in Serbia 0.063mm sieved residues
EP  - 128
IS  - 10
SP  - 123
VL  - 29
UR  - https://hdl.handle.net/21.15107/rcub_rims_92
ER  - 

@article{
author = "Dević, Snežana and Arsenović, Milica and Živančević, Branko",
year = "2009",
abstract = "Particle size is the effective diameter of a particle as measured by sedimentation, sieving, or micrometric methods. Particle sizes are expressed as classes with specific, effective diameter class limits. The broad classes are clay ( lt  2 mu m), silt (2 - 20 mu m dust fragments), and sand (over 20 pm). The physical behavior of a soil is influenced by the size and percentage composition of the size classes. Particle size is important for most soil interpretations, for determination of soil hydrologic qualities, and for soil classification. Physical properties of the soil are influenced by the amounts of total sand and of the various sand fractions present in the soil. Sand particles, because of their size, have a direct impact on the porosity of the clay. This influences other properties, such as saturated hydraulic conductivity, available water capacity, water intake rates, aeration, and compressibilily related to plant growth and engineering uses. Soil properties and application depend on many factors such as: raw clay row, mineralogical constitution quantity and category of accessory minerals, purity and chemical composition, as well as physical and thermal properties. The aim of this study is to determine mineral and chemical composition of 0.063mm sieve residues at a few localities in Serbia. Depending on a quality, clay is used as a raw material in brick or ceramic industry. Sand content is measured in the laboratory by the wet sieving method. Mineralogical composition of samples is determined using optical and XRF methods. Certain fragments are deeper examined with methods used. Results obtained enabled raw clay samples characterization at 4 different locations in Serbia. This way more soil profound evaluation is gained.",
publisher = "American Ceramic Society",
journal = "Developments in Strategic Materials",
title = "Characterization of raw clay materials in Serbia 0.063mm sieved residues",
pages = "128-123",
number = "10",
volume = "29",
url = "https://hdl.handle.net/21.15107/rcub_rims_92"
}

Dević, S., Arsenović, M.,& Živančević, B.. (2009). Characterization of raw clay materials in Serbia 0.063mm sieved residues. in Developments in Strategic Materials
American Ceramic Society., 29(10), 123-128.
https://hdl.handle.net/21.15107/rcub_rims_92

Dević S, Arsenović M, Živančević B. Characterization of raw clay materials in Serbia 0.063mm sieved residues. in Developments in Strategic Materials. 2009;29(10):123-128.
https://hdl.handle.net/21.15107/rcub_rims_92 .

Dević, Snežana, Arsenović, Milica, Živančević, Branko, "Characterization of raw clay materials in Serbia 0.063mm sieved residues" in Developments in Strategic Materials, 29, no. 10 (2009):123-128,
https://hdl.handle.net/21.15107/rcub_rims_92 .

TY  - JOUR
AU  - Dević, Snežana
AU  - Radojević, Zagorka
AU  - Urošević, Dragoljub
PY  - 2007
UR  - http://rims.institutims.rs/handle/123456789/60
AB  - Kao sto je poznato, naša zemlja je veoma bogata nalazištima glina. Glina pojedinih ležišta koristi se za proizvodnju keramičkih proizvoda, kvalitetne fasadne opeke, crepa i monte, dok se glina lošijeg kvaliteta, sa odgovarajućom pripremom, koristi za proizvodnju opeke u opekarskoj industriji. Rad prikazuje ostatke na situ 0,063 mm različitih ležišta gline koja se koristi najčešće u opekarskoj industriji. U radu su ispitani uzorci ležišta "Staro Lojze", "Vrbovac", "TM Plana", "Kovačica", "Žabalj" i "Nadalj". Rezultati dobijeni makroskopskom i mikroskopskom identifikacijom ukazuju na različitost ostatka na situ 0,063 mm u pogledu izgleda, mineralnog sastava, zastupljenosti pojedinih mineralnih satojaka, količine ostatka i dr. Pojedine uzorke odlikuje prisustvo minerala na bazi kalcijske komponente, dok druge karakteriše prisustvo minerala na bazi silicijske komponente. Na bazi kalcijske komponente identifikovani su karbonati koji se pojavljuju u obliku kalcita ili krečnjaka, lesnolokih lutkica ili makrofaunastih fragmenta školjki i puževa, dok se na bazi silicijske komponente naješće sreću kvarc liskuni, feldspati i drugi silikati.
AB  - Clay deposits are abundant in Serbia. Some of those deposits provide high quality raw material for ceramic industry, production of facade bricks, roof tiles and blocks. Lower quality raw materials can be used after an adequate dressing for production of building bricks. Sieve 0.063 mm residues of clays from few deposits most often used in domestic tile industry are presented in this paper. These deposits are "Staro Lojze", "Vrbovac", "TM Plana" "Kovačica", "Žabalj" and "Nadalj". The results obtained by macroscopic and microscopic identification of 0.063 mm sieve residues have shown significant differences in their mineral composition and content, visual appearance and mass percent of the residue in the sample. The samples have generally shown two composition types: a) calcium-carbonate and b) silicate. Calcium-carbonate type residues contain mostly calcite, limestone, loess nodules and shell (bivalves and gastropods) fragments. Silicate type residues most often contain quartz, micas, feldspars and other silicate mineral fragments.
PB  - Institut za rudarstvo i metalurgiju, Bor i Komitet za podzemnu eksploataciju mineralnih sirovina, Resavica
T2  - Rudarski radovi, Bor
T1  - Makroskopska i mikroskopska identifikacija ostatka na situ 0,063 mm ležišta glina u Srbiji
T1  - Macroscopy and microscopy identification of the residue on sieve 0.063 mm of the clay deposits in Serbia
EP  - 24
IS  - 1
SP  - 19
UR  - https://hdl.handle.net/21.15107/rcub_rims_60
ER  - 

@article{
author = "Dević, Snežana and Radojević, Zagorka and Urošević, Dragoljub",
year = "2007",
abstract = "Kao sto je poznato, naša zemlja je veoma bogata nalazištima glina. Glina pojedinih ležišta koristi se za proizvodnju keramičkih proizvoda, kvalitetne fasadne opeke, crepa i monte, dok se glina lošijeg kvaliteta, sa odgovarajućom pripremom, koristi za proizvodnju opeke u opekarskoj industriji. Rad prikazuje ostatke na situ 0,063 mm različitih ležišta gline koja se koristi najčešće u opekarskoj industriji. U radu su ispitani uzorci ležišta "Staro Lojze", "Vrbovac", "TM Plana", "Kovačica", "Žabalj" i "Nadalj". Rezultati dobijeni makroskopskom i mikroskopskom identifikacijom ukazuju na različitost ostatka na situ 0,063 mm u pogledu izgleda, mineralnog sastava, zastupljenosti pojedinih mineralnih satojaka, količine ostatka i dr. Pojedine uzorke odlikuje prisustvo minerala na bazi kalcijske komponente, dok druge karakteriše prisustvo minerala na bazi silicijske komponente. Na bazi kalcijske komponente identifikovani su karbonati koji se pojavljuju u obliku kalcita ili krečnjaka, lesnolokih lutkica ili makrofaunastih fragmenta školjki i puževa, dok se na bazi silicijske komponente naješće sreću kvarc liskuni, feldspati i drugi silikati., Clay deposits are abundant in Serbia. Some of those deposits provide high quality raw material for ceramic industry, production of facade bricks, roof tiles and blocks. Lower quality raw materials can be used after an adequate dressing for production of building bricks. Sieve 0.063 mm residues of clays from few deposits most often used in domestic tile industry are presented in this paper. These deposits are "Staro Lojze", "Vrbovac", "TM Plana" "Kovačica", "Žabalj" and "Nadalj". The results obtained by macroscopic and microscopic identification of 0.063 mm sieve residues have shown significant differences in their mineral composition and content, visual appearance and mass percent of the residue in the sample. The samples have generally shown two composition types: a) calcium-carbonate and b) silicate. Calcium-carbonate type residues contain mostly calcite, limestone, loess nodules and shell (bivalves and gastropods) fragments. Silicate type residues most often contain quartz, micas, feldspars and other silicate mineral fragments.",
publisher = "Institut za rudarstvo i metalurgiju, Bor i Komitet za podzemnu eksploataciju mineralnih sirovina, Resavica",
journal = "Rudarski radovi, Bor",
title = "Makroskopska i mikroskopska identifikacija ostatka na situ 0,063 mm ležišta glina u Srbiji, Macroscopy and microscopy identification of the residue on sieve 0.063 mm of the clay deposits in Serbia",
pages = "24-19",
number = "1",
url = "https://hdl.handle.net/21.15107/rcub_rims_60"
}

Dević, S., Radojević, Z.,& Urošević, D.. (2007). Makroskopska i mikroskopska identifikacija ostatka na situ 0,063 mm ležišta glina u Srbiji. in Rudarski radovi, Bor
Institut za rudarstvo i metalurgiju, Bor i Komitet za podzemnu eksploataciju mineralnih sirovina, Resavica.(1), 19-24.
https://hdl.handle.net/21.15107/rcub_rims_60

Dević S, Radojević Z, Urošević D. Makroskopska i mikroskopska identifikacija ostatka na situ 0,063 mm ležišta glina u Srbiji. in Rudarski radovi, Bor. 2007;(1):19-24.
https://hdl.handle.net/21.15107/rcub_rims_60 .

Dević, Snežana, Radojević, Zagorka, Urošević, Dragoljub, "Makroskopska i mikroskopska identifikacija ostatka na situ 0,063 mm ležišta glina u Srbiji" in Rudarski radovi, Bor, no. 1 (2007):19-24,
https://hdl.handle.net/21.15107/rcub_rims_60 .

TY  - JOUR
AU  - Urošević, Dragoljub
AU  - Dević, Snežana
AU  - Delić-Nikolić, Ivana
AU  - Cocic, Mira
PY  - 2005
UR  - http://rims.institutims.rs/handle/123456789/37
AB  - Cilj rada je bio da se na osnovu nekadašnjih i najnovijih rezultata ispitivanja karaktera granodiorita ležišta "Brajkovac" pronađu neke novije mogućnosti njegove primene. Dosadašnja ispitivanja granodiorita iz ovog ležišta pružila su potvrdu njegove upotrebljivosti u oblasti građavinarstva i arhitekture [1] [2]. Pored već postojeće primene u oblasti građevinarstva i arhitekture, granodiorit ovog ležišta može naći svoju primenu (za oblaganja) kao ukrasni kamen, zatim za izradu manjih ukrasnih predmeta u kombinaciji sa metalom, ali i za proizvodnju ploča od veštačkog ukrasnog kamena gde bi se koristili otpaci - sitniji delovi granodiorita. Posebnom tehnologijom i obradom, uz dodatak veziva, nekog punila mogle bi se proizvoditi ploče različite veličine, oblika i željenog izgleda. Pojedine firme u svetu već koriste tehnologije za izradu ploča i predmeta od veštačkog kamena koji je dobijen korišćenjem prirodnog kamena. Poznato je da se na bazi prirodnog bazalta dobija veštački liveni bazalt željene strukture i karakteristika za raznovrsnu namenu.
AB  - The main objective of this paper is to find new possibilities for the utilisation of granodiorite from the deposit Brajkovac on the basis of both former and latest investigation results. Previous investigations of granodiorite from this deposit confirmed the viability of its use in building industry [1 ], [2 ]. Apart from its current application in building industry the granodiorite from this deposit may be also used for overlying as ornamental stone and for the production of smaller decorative objects in combination with metal parts. Finer particles or leftovers of granodiorite may also be used for the production artificial ornamental stone by introducing fillers as binding agents to manufacture tiles and panels of different sizes, shapes and features. Presently, some companies in the world are already applying the technology for the production of artificial stone from waste-stone material. Namely, the technology for the production of artificially made basalt casts from naturally- occurred basalt rock is already well-known and applied for the production of a series of objects of desired structure and features, and for different purposes.
PB  - Institut za rudarstvo i metalurgiju, Bor i Komitet za podzemnu eksploataciju mineralnih sirovina, Resavica
T2  - Rudarski radovi, Bor
T1  - Mogućnosti upotrebe granodiorita ležišta 'Brajkovac''
T1  - Possibilities for the utilization of granodiorite extracted from the deposit 'Brajkovac''
EP  - 15
IS  - 2
SP  - 10
UR  - https://hdl.handle.net/21.15107/rcub_rims_37
ER  - 

@article{
author = "Urošević, Dragoljub and Dević, Snežana and Delić-Nikolić, Ivana and Cocic, Mira",
year = "2005",
abstract = "Cilj rada je bio da se na osnovu nekadašnjih i najnovijih rezultata ispitivanja karaktera granodiorita ležišta "Brajkovac" pronađu neke novije mogućnosti njegove primene. Dosadašnja ispitivanja granodiorita iz ovog ležišta pružila su potvrdu njegove upotrebljivosti u oblasti građavinarstva i arhitekture [1] [2]. Pored već postojeće primene u oblasti građevinarstva i arhitekture, granodiorit ovog ležišta može naći svoju primenu (za oblaganja) kao ukrasni kamen, zatim za izradu manjih ukrasnih predmeta u kombinaciji sa metalom, ali i za proizvodnju ploča od veštačkog ukrasnog kamena gde bi se koristili otpaci - sitniji delovi granodiorita. Posebnom tehnologijom i obradom, uz dodatak veziva, nekog punila mogle bi se proizvoditi ploče različite veličine, oblika i željenog izgleda. Pojedine firme u svetu već koriste tehnologije za izradu ploča i predmeta od veštačkog kamena koji je dobijen korišćenjem prirodnog kamena. Poznato je da se na bazi prirodnog bazalta dobija veštački liveni bazalt željene strukture i karakteristika za raznovrsnu namenu., The main objective of this paper is to find new possibilities for the utilisation of granodiorite from the deposit Brajkovac on the basis of both former and latest investigation results. Previous investigations of granodiorite from this deposit confirmed the viability of its use in building industry [1 ], [2 ]. Apart from its current application in building industry the granodiorite from this deposit may be also used for overlying as ornamental stone and for the production of smaller decorative objects in combination with metal parts. Finer particles or leftovers of granodiorite may also be used for the production artificial ornamental stone by introducing fillers as binding agents to manufacture tiles and panels of different sizes, shapes and features. Presently, some companies in the world are already applying the technology for the production of artificial stone from waste-stone material. Namely, the technology for the production of artificially made basalt casts from naturally- occurred basalt rock is already well-known and applied for the production of a series of objects of desired structure and features, and for different purposes.",
publisher = "Institut za rudarstvo i metalurgiju, Bor i Komitet za podzemnu eksploataciju mineralnih sirovina, Resavica",
journal = "Rudarski radovi, Bor",
title = "Mogućnosti upotrebe granodiorita ležišta 'Brajkovac'', Possibilities for the utilization of granodiorite extracted from the deposit 'Brajkovac''",
pages = "15-10",
number = "2",
url = "https://hdl.handle.net/21.15107/rcub_rims_37"
}

Urošević, D., Dević, S., Delić-Nikolić, I.,& Cocic, M.. (2005). Mogućnosti upotrebe granodiorita ležišta 'Brajkovac''. in Rudarski radovi, Bor
Institut za rudarstvo i metalurgiju, Bor i Komitet za podzemnu eksploataciju mineralnih sirovina, Resavica.(2), 10-15.
https://hdl.handle.net/21.15107/rcub_rims_37

Urošević D, Dević S, Delić-Nikolić I, Cocic M. Mogućnosti upotrebe granodiorita ležišta 'Brajkovac''. in Rudarski radovi, Bor. 2005;(2):10-15.
https://hdl.handle.net/21.15107/rcub_rims_37 .

Urošević, Dragoljub, Dević, Snežana, Delić-Nikolić, Ivana, Cocic, Mira, "Mogućnosti upotrebe granodiorita ležišta 'Brajkovac''" in Rudarski radovi, Bor, no. 2 (2005):10-15,
https://hdl.handle.net/21.15107/rcub_rims_37 .