TY  - JOUR
AU  - Kovačević, Zorica
AU  - Karastojković, Zoran
AU  - Aleksić, Vujadin
PY  - 2013
UR  - https://doaj.org/article/b1901f45fd5146a992a526f6b1a24fe6
UR  - http://rims.institutims.rs/handle/123456789/663
AB  - Testing of materials properties is usually a discipline for the quality assurance during manufacturing processes. In condition monitoring, certification or upgrading of existing plants and in failure analysis similar benefits from nondestructive testing of materials properties can be achieved. Another benefit from the Non-Destructive Metallography (NDM) is that the test can be made on-site. NDM is a well established and proven tool to help determine the integrity of generator and hydro turbine components during their life-cycle in power plant environments. On-site metallography of components makes it possible to evaluate the microstructure of materials. It allows microstructural analysis of large components that are difficult to move or not permitted to be destructively tested, enabling rapid evaluation of the material. Here are monitored the microstructural changes and crack detection in St 35 connecting rod steel after approximately 15 years in service. The paper includes a short description of the replica method as a technique for microstructural examination of components by using non-destructive testing method.
T2  - DOAJ
T1  - Non-destructive metallography & replica method for inspection connecting rod material and cracks detection
EP  - 24
SP  - 22
VL  - 1/1
UR  - https://hdl.handle.net/21.15107/rcub_rims_663
ER  - 

@article{
author = "Kovačević, Zorica and Karastojković, Zoran and Aleksić, Vujadin",
year = "2013",
abstract = "Testing of materials properties is usually a discipline for the quality assurance during manufacturing processes. In condition monitoring, certification or upgrading of existing plants and in failure analysis similar benefits from nondestructive testing of materials properties can be achieved. Another benefit from the Non-Destructive Metallography (NDM) is that the test can be made on-site. NDM is a well established and proven tool to help determine the integrity of generator and hydro turbine components during their life-cycle in power plant environments. On-site metallography of components makes it possible to evaluate the microstructure of materials. It allows microstructural analysis of large components that are difficult to move or not permitted to be destructively tested, enabling rapid evaluation of the material. Here are monitored the microstructural changes and crack detection in St 35 connecting rod steel after approximately 15 years in service. The paper includes a short description of the replica method as a technique for microstructural examination of components by using non-destructive testing method.",
journal = "DOAJ",
title = "Non-destructive metallography & replica method for inspection connecting rod material and cracks detection",
pages = "24-22",
volume = "1/1",
url = "https://hdl.handle.net/21.15107/rcub_rims_663"
}

Kovačević, Z., Karastojković, Z.,& Aleksić, V.. (2013). Non-destructive metallography & replica method for inspection connecting rod material and cracks detection. in DOAJ, 1/1, 22-24.
https://hdl.handle.net/21.15107/rcub_rims_663

Kovačević Z, Karastojković Z, Aleksić V. Non-destructive metallography & replica method for inspection connecting rod material and cracks detection. in DOAJ. 2013;1/1:22-24.
https://hdl.handle.net/21.15107/rcub_rims_663 .

Kovačević, Zorica, Karastojković, Zoran, Aleksić, Vujadin, "Non-destructive metallography & replica method for inspection connecting rod material and cracks detection" in DOAJ, 1/1 (2013):22-24,
https://hdl.handle.net/21.15107/rcub_rims_663 .

TY  - CONF
AU  - Aleksić, Vujadin
AU  - Kovačević, Zorica
PY  - 2012
UR  - http://rims.institutims.rs/handle/123456789/800
AB  - In present paper, rejection of the upper ring of the guiding apparatus (URGA) during
revitahzation of the A6 aggregates at HE Djerdap 1 has been presented. Rejection was
conducted after 37 years of exploitation based on the decisions made after testing, both
NDT and DT, and unsuccessful recovery using various welding technologies
PB  - Univerzitet Crne Gore, Građevinski fakultet, Crna Gora
C3  - 4th International conference “Civil Engineering – Science and Practice"
T1  - Testing of upper ring of guiding apparatus during revitalization of A6 aggregate at HE Djerdap 1
EP  - 1261
SP  - 1255
UR  - https://hdl.handle.net/21.15107/rcub_rims_800
ER  - 

@conference{
author = "Aleksić, Vujadin and Kovačević, Zorica",
year = "2012",
abstract = "In present paper, rejection of the upper ring of the guiding apparatus (URGA) during
revitahzation of the A6 aggregates at HE Djerdap 1 has been presented. Rejection was
conducted after 37 years of exploitation based on the decisions made after testing, both
NDT and DT, and unsuccessful recovery using various welding technologies",
publisher = "Univerzitet Crne Gore, Građevinski fakultet, Crna Gora",
journal = "4th International conference “Civil Engineering – Science and Practice"",
title = "Testing of upper ring of guiding apparatus during revitalization of A6 aggregate at HE Djerdap 1",
pages = "1261-1255",
url = "https://hdl.handle.net/21.15107/rcub_rims_800"
}

Aleksić, V.,& Kovačević, Z.. (2012). Testing of upper ring of guiding apparatus during revitalization of A6 aggregate at HE Djerdap 1. in 4th International conference “Civil Engineering – Science and Practice"
Univerzitet Crne Gore, Građevinski fakultet, Crna Gora., 1255-1261.
https://hdl.handle.net/21.15107/rcub_rims_800

Aleksić V, Kovačević Z. Testing of upper ring of guiding apparatus during revitalization of A6 aggregate at HE Djerdap 1. in 4th International conference “Civil Engineering – Science and Practice". 2012;:1255-1261.
https://hdl.handle.net/21.15107/rcub_rims_800 .

Aleksić, Vujadin, Kovačević, Zorica, "Testing of upper ring of guiding apparatus during revitalization of A6 aggregate at HE Djerdap 1" in 4th International conference “Civil Engineering – Science and Practice" (2012):1255-1261,
https://hdl.handle.net/21.15107/rcub_rims_800 .

TY  - CONF
AU  - Kovačević, Zorica
AU  - Karastojković, Zoran
AU  - Aleksić, Vujadin
AU  - Janjušević, Zoran
PY  - 2012
UR  - http://rims.institutims.rs/handle/123456789/189
AB  - Turbine blades are one of the most important machine parts in every power generator. Corrosion and/or erosion attack on blades are also available in moisture atmosphere, because the wet water vapour is an usual working media in low pressure turbine. After long time in service, the initial structure is changed Some pores were metallographically detected and their aggregation combined with probable coagulation around non-metallic inclusions is observed Those pores can lead to the crack formation. Serious problems may arise due to these non-metallic inclusions since they are surrounded by a number of individual pores or even characteristic "clouds" of pores are formed around inclusions. From the aspect of blade vibrations, the crack will be expected only at some positions. This kind of crack usually is initiated at the blade surface. In another case, when an aggregation process of pores occurs, the coagulation and coarsening of pores may provoke the crack initiation not on the surface, but in the bulk of the blade material. Metallographic investigations were performed using light microscope.
PB  - Univ Novi Sad, Fac Tech Sci, Adeko, Novi Sad
C3  - Machine and Industrial Design in Mechanical Engineering, Seventh International Symposium, Kod 2012
T1  - Microstructure analysis and crack detection in turbine blades after prolonged exposure in plant
EP  - 510
SP  - 507
UR  - https://hdl.handle.net/21.15107/rcub_rims_189
ER  - 

@conference{
author = "Kovačević, Zorica and Karastojković, Zoran and Aleksić, Vujadin and Janjušević, Zoran",
year = "2012",
abstract = "Turbine blades are one of the most important machine parts in every power generator. Corrosion and/or erosion attack on blades are also available in moisture atmosphere, because the wet water vapour is an usual working media in low pressure turbine. After long time in service, the initial structure is changed Some pores were metallographically detected and their aggregation combined with probable coagulation around non-metallic inclusions is observed Those pores can lead to the crack formation. Serious problems may arise due to these non-metallic inclusions since they are surrounded by a number of individual pores or even characteristic "clouds" of pores are formed around inclusions. From the aspect of blade vibrations, the crack will be expected only at some positions. This kind of crack usually is initiated at the blade surface. In another case, when an aggregation process of pores occurs, the coagulation and coarsening of pores may provoke the crack initiation not on the surface, but in the bulk of the blade material. Metallographic investigations were performed using light microscope.",
publisher = "Univ Novi Sad, Fac Tech Sci, Adeko, Novi Sad",
journal = "Machine and Industrial Design in Mechanical Engineering, Seventh International Symposium, Kod 2012",
title = "Microstructure analysis and crack detection in turbine blades after prolonged exposure in plant",
pages = "510-507",
url = "https://hdl.handle.net/21.15107/rcub_rims_189"
}

Kovačević, Z., Karastojković, Z., Aleksić, V.,& Janjušević, Z.. (2012). Microstructure analysis and crack detection in turbine blades after prolonged exposure in plant. in Machine and Industrial Design in Mechanical Engineering, Seventh International Symposium, Kod 2012
Univ Novi Sad, Fac Tech Sci, Adeko, Novi Sad., 507-510.
https://hdl.handle.net/21.15107/rcub_rims_189

Kovačević Z, Karastojković Z, Aleksić V, Janjušević Z. Microstructure analysis and crack detection in turbine blades after prolonged exposure in plant. in Machine and Industrial Design in Mechanical Engineering, Seventh International Symposium, Kod 2012. 2012;:507-510.
https://hdl.handle.net/21.15107/rcub_rims_189 .

Kovačević, Zorica, Karastojković, Zoran, Aleksić, Vujadin, Janjušević, Zoran, "Microstructure analysis and crack detection in turbine blades after prolonged exposure in plant" in Machine and Industrial Design in Mechanical Engineering, Seventh International Symposium, Kod 2012 (2012):507-510,
https://hdl.handle.net/21.15107/rcub_rims_189 .

TY  - CONF
AU  - Aleksić, Vujadin
AU  - Milović, Ljubica
AU  - Kovačević, Zorica
PY  - 2012
UR  - http://rims.institutims.rs/handle/123456789/176
AB  - In present paper, methodological approach to the analysis of the failures and recovery of the damages has been presented on an example of fracture and damage of a structure of the reloading bridge. The approach presented can be applied to various types of similar structures, and its application in preventive maintenance would contribute to extension of exploitation life of the reloading bridges.
PB  - Univ Novi Sad, Fac Tech Sci, Adeko, Novi Sad
C3  - Machine and Industrial Design in Mechanical Engineering, Seventh International Symposium, Kod 2012
T1  - The failures of a supporting structure of a coal-reloading bridge and methodological approach to recovery of the damages
EP  - 108
SP  - 105
UR  - https://hdl.handle.net/21.15107/rcub_technorep_2161
ER  - 

@conference{
author = "Aleksić, Vujadin and Milović, Ljubica and Kovačević, Zorica",
year = "2012",
abstract = "In present paper, methodological approach to the analysis of the failures and recovery of the damages has been presented on an example of fracture and damage of a structure of the reloading bridge. The approach presented can be applied to various types of similar structures, and its application in preventive maintenance would contribute to extension of exploitation life of the reloading bridges.",
publisher = "Univ Novi Sad, Fac Tech Sci, Adeko, Novi Sad",
journal = "Machine and Industrial Design in Mechanical Engineering, Seventh International Symposium, Kod 2012",
title = "The failures of a supporting structure of a coal-reloading bridge and methodological approach to recovery of the damages",
pages = "108-105",
url = "https://hdl.handle.net/21.15107/rcub_technorep_2161"
}

Aleksić, V., Milović, L.,& Kovačević, Z.. (2012). The failures of a supporting structure of a coal-reloading bridge and methodological approach to recovery of the damages. in Machine and Industrial Design in Mechanical Engineering, Seventh International Symposium, Kod 2012
Univ Novi Sad, Fac Tech Sci, Adeko, Novi Sad., 105-108.
https://hdl.handle.net/21.15107/rcub_technorep_2161

Aleksić V, Milović L, Kovačević Z. The failures of a supporting structure of a coal-reloading bridge and methodological approach to recovery of the damages. in Machine and Industrial Design in Mechanical Engineering, Seventh International Symposium, Kod 2012. 2012;:105-108.
https://hdl.handle.net/21.15107/rcub_technorep_2161 .

Aleksić, Vujadin, Milović, Ljubica, Kovačević, Zorica, "The failures of a supporting structure of a coal-reloading bridge and methodological approach to recovery of the damages" in Machine and Industrial Design in Mechanical Engineering, Seventh International Symposium, Kod 2012 (2012):105-108,
https://hdl.handle.net/21.15107/rcub_technorep_2161 .

TY  - JOUR
AU  - Aleksić, Vujadin
AU  - Milović, Ljubica
AU  - Kovačević, Zorica
PY  - 2012
UR  - http://rims.institutims.rs/handle/123456789/193
AB  - In present paper, the methodological approach to the analysis of the causes of failures and to recovery of the damages has been presented using, as an example, the fracture and damage of a welded steel structure of a reloading bridge. The approach presented can be applied to various types of similar structures, and its application in preventive maintenance would contribute to extension of exploitation life of the reloading bridges.
PB  - Univerzitet u Novom Sadu - Fakultet tehničkih nauka, Novi Sad
T2  - Machine Design
T1  - Recovery of the damages of a welded steel structure of a coal-reloading bridge: Methodological approach
EP  - 242
IS  - 4
SP  - 237
VL  - 4
UR  - https://hdl.handle.net/21.15107/rcub_technorep_2065
ER  - 

@article{
author = "Aleksić, Vujadin and Milović, Ljubica and Kovačević, Zorica",
year = "2012",
abstract = "In present paper, the methodological approach to the analysis of the causes of failures and to recovery of the damages has been presented using, as an example, the fracture and damage of a welded steel structure of a reloading bridge. The approach presented can be applied to various types of similar structures, and its application in preventive maintenance would contribute to extension of exploitation life of the reloading bridges.",
publisher = "Univerzitet u Novom Sadu - Fakultet tehničkih nauka, Novi Sad",
journal = "Machine Design",
title = "Recovery of the damages of a welded steel structure of a coal-reloading bridge: Methodological approach",
pages = "242-237",
number = "4",
volume = "4",
url = "https://hdl.handle.net/21.15107/rcub_technorep_2065"
}

Aleksić, V., Milović, L.,& Kovačević, Z.. (2012). Recovery of the damages of a welded steel structure of a coal-reloading bridge: Methodological approach. in Machine Design
Univerzitet u Novom Sadu - Fakultet tehničkih nauka, Novi Sad., 4(4), 237-242.
https://hdl.handle.net/21.15107/rcub_technorep_2065

Aleksić V, Milović L, Kovačević Z. Recovery of the damages of a welded steel structure of a coal-reloading bridge: Methodological approach. in Machine Design. 2012;4(4):237-242.
https://hdl.handle.net/21.15107/rcub_technorep_2065 .

Aleksić, Vujadin, Milović, Ljubica, Kovačević, Zorica, "Recovery of the damages of a welded steel structure of a coal-reloading bridge: Methodological approach" in Machine Design, 4, no. 4 (2012):237-242,
https://hdl.handle.net/21.15107/rcub_technorep_2065 .

TY  - JOUR
AU  - Aleksić, Vujadin
AU  - Jaković, Dragan
AU  - Kovačević, Zorica
PY  - 2011
UR  - http://rims.institutims.rs/handle/123456789/848
T2  - International Scientific Journal Machines. Technologies. Materials
T1  - SolidWorks used for the process of optimization of supporting structure of a pressure vessel
EP  - 6
IS  - 6
SP  - 3
VL  - 5
UR  - https://hdl.handle.net/21.15107/rcub_rims_848
ER  - 

@article{
author = "Aleksić, Vujadin and Jaković, Dragan and Kovačević, Zorica",
year = "2011",
journal = "International Scientific Journal Machines. Technologies. Materials",
title = "SolidWorks used for the process of optimization of supporting structure of a pressure vessel",
pages = "6-3",
number = "6",
volume = "5",
url = "https://hdl.handle.net/21.15107/rcub_rims_848"
}

Aleksić, V., Jaković, D.,& Kovačević, Z.. (2011). SolidWorks used for the process of optimization of supporting structure of a pressure vessel. in International Scientific Journal Machines. Technologies. Materials, 5(6), 3-6.
https://hdl.handle.net/21.15107/rcub_rims_848

Aleksić V, Jaković D, Kovačević Z. SolidWorks used for the process of optimization of supporting structure of a pressure vessel. in International Scientific Journal Machines. Technologies. Materials. 2011;5(6):3-6.
https://hdl.handle.net/21.15107/rcub_rims_848 .

Aleksić, Vujadin, Jaković, Dragan, Kovačević, Zorica, "SolidWorks used for the process of optimization of supporting structure of a pressure vessel" in International Scientific Journal Machines. Technologies. Materials, 5, no. 6 (2011):3-6,
https://hdl.handle.net/21.15107/rcub_rims_848 .

TY  - CHAP
AU  - Kovačević, Zorica
AU  - Karastojković, Zoran
AU  - Aleksić, Vujadin
PY  - 2011
UR  - http://rims.institutims.rs/handle/123456789/792
T2  - TOYOTARITY
T1  - On-site metallography & replica method for inspection connecting rod material and cracks detection
EP  - 56
SP  - 41
UR  - https://hdl.handle.net/21.15107/rcub_rims_792
ER  - 

@inbook{
author = "Kovačević, Zorica and Karastojković, Zoran and Aleksić, Vujadin",
year = "2011",
journal = "TOYOTARITY",
booktitle = "On-site metallography & replica method for inspection connecting rod material and cracks detection",
pages = "56-41",
url = "https://hdl.handle.net/21.15107/rcub_rims_792"
}

Kovačević, Z., Karastojković, Z.,& Aleksić, V.. (2011). On-site metallography & replica method for inspection connecting rod material and cracks detection. in TOYOTARITY, 41-56.
https://hdl.handle.net/21.15107/rcub_rims_792

Kovačević Z, Karastojković Z, Aleksić V. On-site metallography & replica method for inspection connecting rod material and cracks detection. in TOYOTARITY. 2011;:41-56.
https://hdl.handle.net/21.15107/rcub_rims_792 .

Kovačević, Zorica, Karastojković, Zoran, Aleksić, Vujadin, "On-site metallography & replica method for inspection connecting rod material and cracks detection" in TOYOTARITY (2011):41-56,
https://hdl.handle.net/21.15107/rcub_rims_792 .

TY  - CONF
AU  - Kovačević, Zorica
AU  - Karastojković, Zoran
AU  - Aleksić, Vujadin
PY  - 2011
UR  - http://rims.institutims.rs/handle/123456789/786
PB  - Masinski fakultet, Kragujevac, Srbija
C3  - 5th International Quality Conference
T1  - Microstructure and characterisation of quality water pipes after 50 years in service
EP  - 351
SP  - 345
UR  - https://hdl.handle.net/21.15107/rcub_rims_786
ER  - 

@conference{
author = "Kovačević, Zorica and Karastojković, Zoran and Aleksić, Vujadin",
year = "2011",
publisher = "Masinski fakultet, Kragujevac, Srbija",
journal = "5th International Quality Conference",
title = "Microstructure and characterisation of quality water pipes after 50 years in service",
pages = "351-345",
url = "https://hdl.handle.net/21.15107/rcub_rims_786"
}

Kovačević, Z., Karastojković, Z.,& Aleksić, V.. (2011). Microstructure and characterisation of quality water pipes after 50 years in service. in 5th International Quality Conference
Masinski fakultet, Kragujevac, Srbija., 345-351.
https://hdl.handle.net/21.15107/rcub_rims_786

Kovačević Z, Karastojković Z, Aleksić V. Microstructure and characterisation of quality water pipes after 50 years in service. in 5th International Quality Conference. 2011;:345-351.
https://hdl.handle.net/21.15107/rcub_rims_786 .

Kovačević, Zorica, Karastojković, Zoran, Aleksić, Vujadin, "Microstructure and characterisation of quality water pipes after 50 years in service" in 5th International Quality Conference (2011):345-351,
https://hdl.handle.net/21.15107/rcub_rims_786 .

TY  - CONF
AU  - Aleksić, Vujadin
AU  - Jaković, Dragan
AU  - Kovačević, Zorica
PY  - 2011
UR  - http://rims.institutims.rs/handle/123456789/698
AB  - According to the new regulations of the European Community (Directive 97/23/EC, design and manufacture of the pressure
vessels (PV) shall be in accordance with legal and technical regulations stating the application of harmonized standards to be optional for a
manufacturer of the equipment. Increased responsibility of the manufacturers gives more freedom in selection of the methods, design,
calculation and optimization in order to provide safety. In this paper, using a liquid CO2-containing vessel as an example, a survey of the
process of optimization of a supporting structure has been presented. For parametric design, construction and calculation the SolidWorks
programme has been used, taking into consideration the regulations and standards in effect, and in accordance with new and general
approach to pressure equipment (Pressure Equipment Directive – PED) relating to structural integrity, i.e. fundamental requirements in
terms of safety, calculation, design and testing of strength.
C3  - VIII INTERNATIONAL CONGRESS MACHINЕS, TECHNOLОGIES, MATERIALS, Varna, Bulgaria
T1  - SolidWorks used for the process of optimization of supporting structure of a pressure vessel
EP  - 193
SP  - 190
VL  - 3
UR  - https://hdl.handle.net/21.15107/rcub_rims_698
ER  - 

@conference{
author = "Aleksić, Vujadin and Jaković, Dragan and Kovačević, Zorica",
year = "2011",
abstract = "According to the new regulations of the European Community (Directive 97/23/EC, design and manufacture of the pressure
vessels (PV) shall be in accordance with legal and technical regulations stating the application of harmonized standards to be optional for a
manufacturer of the equipment. Increased responsibility of the manufacturers gives more freedom in selection of the methods, design,
calculation and optimization in order to provide safety. In this paper, using a liquid CO2-containing vessel as an example, a survey of the
process of optimization of a supporting structure has been presented. For parametric design, construction and calculation the SolidWorks
programme has been used, taking into consideration the regulations and standards in effect, and in accordance with new and general
approach to pressure equipment (Pressure Equipment Directive – PED) relating to structural integrity, i.e. fundamental requirements in
terms of safety, calculation, design and testing of strength.",
journal = "VIII INTERNATIONAL CONGRESS MACHINЕS, TECHNOLОGIES, MATERIALS, Varna, Bulgaria",
title = "SolidWorks used for the process of optimization of supporting structure of a pressure vessel",
pages = "193-190",
volume = "3",
url = "https://hdl.handle.net/21.15107/rcub_rims_698"
}

Aleksić, V., Jaković, D.,& Kovačević, Z.. (2011). SolidWorks used for the process of optimization of supporting structure of a pressure vessel. in VIII INTERNATIONAL CONGRESS MACHINЕS, TECHNOLОGIES, MATERIALS, Varna, Bulgaria, 3, 190-193.
https://hdl.handle.net/21.15107/rcub_rims_698

Aleksić V, Jaković D, Kovačević Z. SolidWorks used for the process of optimization of supporting structure of a pressure vessel. in VIII INTERNATIONAL CONGRESS MACHINЕS, TECHNOLОGIES, MATERIALS, Varna, Bulgaria. 2011;3:190-193.
https://hdl.handle.net/21.15107/rcub_rims_698 .

Aleksić, Vujadin, Jaković, Dragan, Kovačević, Zorica, "SolidWorks used for the process of optimization of supporting structure of a pressure vessel" in VIII INTERNATIONAL CONGRESS MACHINЕS, TECHNOLОGIES, MATERIALS, Varna, Bulgaria, 3 (2011):190-193,
https://hdl.handle.net/21.15107/rcub_rims_698 .

TY  - CONF
AU  - Odanović, Zoran
AU  - Arsić, Miodrag
AU  - Aleksić, Vujadin
AU  - Kovačević, Zorica
PY  - 2007
UR  - http://rims.institutims.rs/handle/123456789/853
C3  - 13. Savetovanje KOMIM, Tara, Zbornik (Saopštenje)
T1  - Praktična primena kvantitativne metalografije u metalurškom inženjerstvu i kontroli kvaliteta
EP  - 60
SP  - 59
UR  - https://hdl.handle.net/21.15107/rcub_rims_853
ER  - 

@conference{
author = "Odanović, Zoran and Arsić, Miodrag and Aleksić, Vujadin and Kovačević, Zorica",
year = "2007",
journal = "13. Savetovanje KOMIM, Tara, Zbornik (Saopštenje)",
title = "Praktična primena kvantitativne metalografije u metalurškom inženjerstvu i kontroli kvaliteta",
pages = "60-59",
url = "https://hdl.handle.net/21.15107/rcub_rims_853"
}

Odanović, Z., Arsić, M., Aleksić, V.,& Kovačević, Z.. (2007). Praktična primena kvantitativne metalografije u metalurškom inženjerstvu i kontroli kvaliteta. in 13. Savetovanje KOMIM, Tara, Zbornik (Saopštenje), 59-60.
https://hdl.handle.net/21.15107/rcub_rims_853

Odanović Z, Arsić M, Aleksić V, Kovačević Z. Praktična primena kvantitativne metalografije u metalurškom inženjerstvu i kontroli kvaliteta. in 13. Savetovanje KOMIM, Tara, Zbornik (Saopštenje). 2007;:59-60.
https://hdl.handle.net/21.15107/rcub_rims_853 .

Odanović, Zoran, Arsić, Miodrag, Aleksić, Vujadin, Kovačević, Zorica, "Praktična primena kvantitativne metalografije u metalurškom inženjerstvu i kontroli kvaliteta" in 13. Savetovanje KOMIM, Tara, Zbornik (Saopštenje) (2007):59-60,
https://hdl.handle.net/21.15107/rcub_rims_853 .