TY  - JOUR
AU  - Arsić, Miodrag
AU  - Bošnjak, Srđan
AU  - Sedmak, Simon
AU  - Šarkočević, Živče
AU  - Savić, Zoran
AU  - Radu, D.
PY  - 2016
UR  - http://rims.institutims.rs/handle/123456789/298
AB  - Results of non-destructive testing of the Kaplan turbine runner manhole welded structure are presented, on the basis of which the repair methodology is defined. During repair, the welding technology for elements of the manhole is modified along with the proposal given for the modification of its structural design, because the finite element method calculation proved that the rectangular welded structure of the manhole was significantly better than round welded structure when it comes to integrity and service life.
PB  - Institut za ispitivanje materijala, Beograd
T2  - Structural Integrity and Life
T1  - Determination of damage and repair methodology for the runner manhole of Kaplan turbine at the hydro power plant 'Djerdap 1'
EP  - 153
IS  - 3
SP  - 149
VL  - 16
UR  - https://hdl.handle.net/21.15107/rcub_rims_298
ER  - 

@article{
author = "Arsić, Miodrag and Bošnjak, Srđan and Sedmak, Simon and Šarkočević, Živče and Savić, Zoran and Radu, D.",
year = "2016",
abstract = "Results of non-destructive testing of the Kaplan turbine runner manhole welded structure are presented, on the basis of which the repair methodology is defined. During repair, the welding technology for elements of the manhole is modified along with the proposal given for the modification of its structural design, because the finite element method calculation proved that the rectangular welded structure of the manhole was significantly better than round welded structure when it comes to integrity and service life.",
publisher = "Institut za ispitivanje materijala, Beograd",
journal = "Structural Integrity and Life",
title = "Determination of damage and repair methodology for the runner manhole of Kaplan turbine at the hydro power plant 'Djerdap 1'",
pages = "153-149",
number = "3",
volume = "16",
url = "https://hdl.handle.net/21.15107/rcub_rims_298"
}

Arsić, M., Bošnjak, S., Sedmak, S., Šarkočević, Ž., Savić, Z.,& Radu, D.. (2016). Determination of damage and repair methodology for the runner manhole of Kaplan turbine at the hydro power plant 'Djerdap 1'. in Structural Integrity and Life
Institut za ispitivanje materijala, Beograd., 16(3), 149-153.
https://hdl.handle.net/21.15107/rcub_rims_298

Arsić M, Bošnjak S, Sedmak S, Šarkočević Ž, Savić Z, Radu D. Determination of damage and repair methodology for the runner manhole of Kaplan turbine at the hydro power plant 'Djerdap 1'. in Structural Integrity and Life. 2016;16(3):149-153.
https://hdl.handle.net/21.15107/rcub_rims_298 .

Arsić, Miodrag, Bošnjak, Srđan, Sedmak, Simon, Šarkočević, Živče, Savić, Zoran, Radu, D., "Determination of damage and repair methodology for the runner manhole of Kaplan turbine at the hydro power plant 'Djerdap 1'" in Structural Integrity and Life, 16, no. 3 (2016):149-153,
https://hdl.handle.net/21.15107/rcub_rims_298 .

TY  - JOUR
AU  - Šarkočević, Živče
AU  - Arsić, Miodrag
AU  - Lazić-Vulićević, Ljubica
AU  - Savić, Zoran
PY  - 2010
UR  - http://rims.institutims.rs/handle/123456789/107
AB  - Izbor čelika, dimenzija i načina proizvodnje zaštitnih zavarenih cevi je deo procesa konstruisanja, jer je u uskoj vezi sa funkcijom cevi kao konstrukcijske celine u određenim uslovima eksploatacije za predviđeni vek trajanja. Kvalitet zavarenih spojeva u procesu proizvodnje cevi definiše se karakteristikama koje one moraju posedovati da bi zadovoljile određene zahteve, što se postiže izborom odgovarajućih postupaka i parametara zavarivanja, sprovođenjem programa kontrole svih tehnoloških operacija u njihovoj izradi i mehaničkim i tehnološkim ispitivanjima otpornosti i deformacije osnovnog materijala i zavarenih spojeva cevi. U radu su prikazani rezultati ispitivanja mehaničkih osobina uzdužno zavarenih cevi, izrađenih visokofrekventnim kontaktnim zavarivanjem od čelika povećane čvrstoće API J55.
AB  - Selection of the steel, dimensions and manufacturing methods for protective welded pipes is part of the design process, because it is closely related to the function of tube construction as a whole under certain conditions, for a calculated service life. The quality of welded joints in the process of tubes production is defined by characteristics that they must have to meet certain requirements, which are achieved by choosing appropriate procedures and welding parameters, by controlling all unit operations in their preparation and mechanical and engineering stress and strain tests and base material of welded joints. This paper presents the results of the mechanical properties of longitudinally welded pipes. Casing welded pipe intended for oil and gas wells are made by high frequency contact welding of steel API J55, with increased strength.
PB  - DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd
T2  - Zavarivanje i zavarene konstrukcije
T1  - Mehaničke osobine zavarenih cevi izrađenih visokofrekventnim postupkom zavarivanja od čelika API J55
T1  - Mechanical properties of welded pipes produced by high frequency welding of the steel API J55
EP  - 142
IS  - 4
SP  - 137
VL  - 55
UR  - https://hdl.handle.net/21.15107/rcub_rims_107
ER  - 

@article{
author = "Šarkočević, Živče and Arsić, Miodrag and Lazić-Vulićević, Ljubica and Savić, Zoran",
year = "2010",
abstract = "Izbor čelika, dimenzija i načina proizvodnje zaštitnih zavarenih cevi je deo procesa konstruisanja, jer je u uskoj vezi sa funkcijom cevi kao konstrukcijske celine u određenim uslovima eksploatacije za predviđeni vek trajanja. Kvalitet zavarenih spojeva u procesu proizvodnje cevi definiše se karakteristikama koje one moraju posedovati da bi zadovoljile određene zahteve, što se postiže izborom odgovarajućih postupaka i parametara zavarivanja, sprovođenjem programa kontrole svih tehnoloških operacija u njihovoj izradi i mehaničkim i tehnološkim ispitivanjima otpornosti i deformacije osnovnog materijala i zavarenih spojeva cevi. U radu su prikazani rezultati ispitivanja mehaničkih osobina uzdužno zavarenih cevi, izrađenih visokofrekventnim kontaktnim zavarivanjem od čelika povećane čvrstoće API J55., Selection of the steel, dimensions and manufacturing methods for protective welded pipes is part of the design process, because it is closely related to the function of tube construction as a whole under certain conditions, for a calculated service life. The quality of welded joints in the process of tubes production is defined by characteristics that they must have to meet certain requirements, which are achieved by choosing appropriate procedures and welding parameters, by controlling all unit operations in their preparation and mechanical and engineering stress and strain tests and base material of welded joints. This paper presents the results of the mechanical properties of longitudinally welded pipes. Casing welded pipe intended for oil and gas wells are made by high frequency contact welding of steel API J55, with increased strength.",
publisher = "DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd",
journal = "Zavarivanje i zavarene konstrukcije",
title = "Mehaničke osobine zavarenih cevi izrađenih visokofrekventnim postupkom zavarivanja od čelika API J55, Mechanical properties of welded pipes produced by high frequency welding of the steel API J55",
pages = "142-137",
number = "4",
volume = "55",
url = "https://hdl.handle.net/21.15107/rcub_rims_107"
}

Šarkočević, Ž., Arsić, M., Lazić-Vulićević, L.,& Savić, Z.. (2010). Mehaničke osobine zavarenih cevi izrađenih visokofrekventnim postupkom zavarivanja od čelika API J55. in Zavarivanje i zavarene konstrukcije
DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd., 55(4), 137-142.
https://hdl.handle.net/21.15107/rcub_rims_107

Šarkočević Ž, Arsić M, Lazić-Vulićević L, Savić Z. Mehaničke osobine zavarenih cevi izrađenih visokofrekventnim postupkom zavarivanja od čelika API J55. in Zavarivanje i zavarene konstrukcije. 2010;55(4):137-142.
https://hdl.handle.net/21.15107/rcub_rims_107 .

Šarkočević, Živče, Arsić, Miodrag, Lazić-Vulićević, Ljubica, Savić, Zoran, "Mehaničke osobine zavarenih cevi izrađenih visokofrekventnim postupkom zavarivanja od čelika API J55" in Zavarivanje i zavarene konstrukcije, 55, no. 4 (2010):137-142,
https://hdl.handle.net/21.15107/rcub_rims_107 .

TY  - JOUR
AU  - Šarkočević, Živče
AU  - Arsić, Miodrag
AU  - Rakin, Marko
AU  - Međo, Bojan
AU  - Mladenović, Mladen
AU  - Jaković, Dragan
PY  - 2009
UR  - http://rims.institutims.rs/handle/123456789/96
AB  - Izbor čelika, dimenzija i načina proizvodnje zavarenih cevi je deo procesa konstruisanja, jer je u uskoj vezi sa funkcijom cevi kao konstrukcijske celine u određenim uslovima eksploatacije za predviđeni vek trajanja. Kvalitet zavarenih spojeva u procesu proizvodnje cevi definiše se karakteristikama koje one moraju posedovati da bi zadovoljile određene zahteve, što se postiže izborom odgovarajućih postupaka i parametara zavarivanja, sprovođenjem programa kontrole svih tehnoloških operacija u njihovoj izradi i mehaničkim i tehnološkim ispitivanjima otpornosti i deformacije osnovnog materijala i zavarenih spojeva cevi. U radu su prikazani rezultati ispitivanja mehaničkih osobina spiralno zavarenih cevi, za dva proizvodna procesa sa različitim parametrima zavarivanja. Cevi namenjene za naftovode i gasovode su izrađene zavarivanjem pod praškom (EPP) od čelika povećane čvrstoće API X60.
AB  - The selection of steel, the dimensions and methods of seam welded steel tubes fabrication are closely connected to the function of tube as a whole structure in specific working conditions, for a calculated service life. The quality of welded joints in the fabrication process of seam welded tubes is defined by properties the tubes must possess in order to satisfy defined requirements, and can be achieved by choosing appropriate procedures and welding parameters, by following control programmes in all fabricating operations, and through mechanical and technology stress and strain tests of base metal and seam welded joints. The paper presents the results of the mechanical properties of spiral welded pipes, the two production processes with different welding parameters. Tubes designed for oil and gas pipelines are made by welding the powder (EPP) steel increased strength of API X60.
PB  - DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd
T2  - Zavarivanje i zavarene konstrukcije
T1  - Uticaj parametara EPP postupka zavarivanja na mehaničke osobine spiralno zavarenih cevi od čelika API X60
T1  - Influence of SA procedure welding parameters on mechanical properties spiral welded steel tubes API X60
EP  - 147
IS  - 4
SP  - 141
VL  - 54
UR  - https://hdl.handle.net/21.15107/rcub_rims_96
ER  - 

@article{
author = "Šarkočević, Živče and Arsić, Miodrag and Rakin, Marko and Međo, Bojan and Mladenović, Mladen and Jaković, Dragan",
year = "2009",
abstract = "Izbor čelika, dimenzija i načina proizvodnje zavarenih cevi je deo procesa konstruisanja, jer je u uskoj vezi sa funkcijom cevi kao konstrukcijske celine u određenim uslovima eksploatacije za predviđeni vek trajanja. Kvalitet zavarenih spojeva u procesu proizvodnje cevi definiše se karakteristikama koje one moraju posedovati da bi zadovoljile određene zahteve, što se postiže izborom odgovarajućih postupaka i parametara zavarivanja, sprovođenjem programa kontrole svih tehnoloških operacija u njihovoj izradi i mehaničkim i tehnološkim ispitivanjima otpornosti i deformacije osnovnog materijala i zavarenih spojeva cevi. U radu su prikazani rezultati ispitivanja mehaničkih osobina spiralno zavarenih cevi, za dva proizvodna procesa sa različitim parametrima zavarivanja. Cevi namenjene za naftovode i gasovode su izrađene zavarivanjem pod praškom (EPP) od čelika povećane čvrstoće API X60., The selection of steel, the dimensions and methods of seam welded steel tubes fabrication are closely connected to the function of tube as a whole structure in specific working conditions, for a calculated service life. The quality of welded joints in the fabrication process of seam welded tubes is defined by properties the tubes must possess in order to satisfy defined requirements, and can be achieved by choosing appropriate procedures and welding parameters, by following control programmes in all fabricating operations, and through mechanical and technology stress and strain tests of base metal and seam welded joints. The paper presents the results of the mechanical properties of spiral welded pipes, the two production processes with different welding parameters. Tubes designed for oil and gas pipelines are made by welding the powder (EPP) steel increased strength of API X60.",
publisher = "DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd",
journal = "Zavarivanje i zavarene konstrukcije",
title = "Uticaj parametara EPP postupka zavarivanja na mehaničke osobine spiralno zavarenih cevi od čelika API X60, Influence of SA procedure welding parameters on mechanical properties spiral welded steel tubes API X60",
pages = "147-141",
number = "4",
volume = "54",
url = "https://hdl.handle.net/21.15107/rcub_rims_96"
}

Šarkočević, Ž., Arsić, M., Rakin, M., Međo, B., Mladenović, M.,& Jaković, D.. (2009). Uticaj parametara EPP postupka zavarivanja na mehaničke osobine spiralno zavarenih cevi od čelika API X60. in Zavarivanje i zavarene konstrukcije
DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd., 54(4), 141-147.
https://hdl.handle.net/21.15107/rcub_rims_96

Šarkočević Ž, Arsić M, Rakin M, Međo B, Mladenović M, Jaković D. Uticaj parametara EPP postupka zavarivanja na mehaničke osobine spiralno zavarenih cevi od čelika API X60. in Zavarivanje i zavarene konstrukcije. 2009;54(4):141-147.
https://hdl.handle.net/21.15107/rcub_rims_96 .

Šarkočević, Živče, Arsić, Miodrag, Rakin, Marko, Međo, Bojan, Mladenović, Mladen, Jaković, Dragan, "Uticaj parametara EPP postupka zavarivanja na mehaničke osobine spiralno zavarenih cevi od čelika API X60" in Zavarivanje i zavarene konstrukcije, 54, no. 4 (2009):141-147,
https://hdl.handle.net/21.15107/rcub_rims_96 .

TY  - JOUR
AU  - Aleksić, Vujadin
AU  - Arsić, Miodrag
AU  - Šarkočević, Živče
PY  - 2005
UR  - http://rims.institutims.rs/handle/123456789/45
AB  - U radu je dat prikaz mogućih oštećenja i posledica izazvanih korozijom kablova za prednaprezanje u prednapregnutim betonskim konstrukcijama, a razmotrena je i mogućnost preduzimanja mera da se takve pojave preventivno spreče.
AB  - In this paper is giving illustrate of potentiality damages and consequence of corrosion wire in pre stressed of concrete structure and considered might initiate steps in order that phenomena prior to prevent.
PB  - Inženjersko društvo za koroziju, Beograd
T2  - Zaštita materijala
T1  - Oštećenja i posledice korozije metala u prednapregnutim betonskom konstrukcijama
T1  - Damages and consequence of corrosion the metal in priestesses of concrete structures
EP  - 38
IS  - 4
SP  - 35
VL  - 46
UR  - https://hdl.handle.net/21.15107/rcub_rims_45
ER  - 

@article{
author = "Aleksić, Vujadin and Arsić, Miodrag and Šarkočević, Živče",
year = "2005",
abstract = "U radu je dat prikaz mogućih oštećenja i posledica izazvanih korozijom kablova za prednaprezanje u prednapregnutim betonskim konstrukcijama, a razmotrena je i mogućnost preduzimanja mera da se takve pojave preventivno spreče., In this paper is giving illustrate of potentiality damages and consequence of corrosion wire in pre stressed of concrete structure and considered might initiate steps in order that phenomena prior to prevent.",
publisher = "Inženjersko društvo za koroziju, Beograd",
journal = "Zaštita materijala",
title = "Oštećenja i posledice korozije metala u prednapregnutim betonskom konstrukcijama, Damages and consequence of corrosion the metal in priestesses of concrete structures",
pages = "38-35",
number = "4",
volume = "46",
url = "https://hdl.handle.net/21.15107/rcub_rims_45"
}

Aleksić, V., Arsić, M.,& Šarkočević, Ž.. (2005). Oštećenja i posledice korozije metala u prednapregnutim betonskom konstrukcijama. in Zaštita materijala
Inženjersko društvo za koroziju, Beograd., 46(4), 35-38.
https://hdl.handle.net/21.15107/rcub_rims_45

Aleksić V, Arsić M, Šarkočević Ž. Oštećenja i posledice korozije metala u prednapregnutim betonskom konstrukcijama. in Zaštita materijala. 2005;46(4):35-38.
https://hdl.handle.net/21.15107/rcub_rims_45 .

Aleksić, Vujadin, Arsić, Miodrag, Šarkočević, Živče, "Oštećenja i posledice korozije metala u prednapregnutim betonskom konstrukcijama" in Zaštita materijala, 46, no. 4 (2005):35-38,
https://hdl.handle.net/21.15107/rcub_rims_45 .