TY  - JOUR
AU  - Prstić, Aurel
AU  - Aćimović-Pavlović, Zagorka
AU  - Terzić, Anja
AU  - Pavlović, Ljubica
PY  - 2014
UR  - http://rims.institutims.rs/handle/123456789/258
AB  - Refractory coatings based on different refractory fillers (talc, cordierite, zircon and mullite) for application in Lost Foam casting process were investigated. Design and optimization of the coatings composition with controlled, rheological properties included, and consequently synthesis were achieved by application of different coating components, namely different suspension agents and fillers and by alteration of the coating production procedure. Morphologic and microstructural analysis of fillers was carried out by means of scanning electronic microscope. X-ray diffraction analysis by means of X-ray diffractometer was applied in determination and monitoring the phase composition changes of the refractory fillers. An analysis of the particle size and shape was carried out by means of the PC software application package OZARIA 2.5. To assess the effects of application of individual refractory coatings, a detailed investigation of structural and mechanical properties of the moldings obtained was performed. Highlight was placed on revealing and analyzing surface and volume defects present on moldings. Radiographic molding tests were carried out by means of the X-ray device SAIFORT type-S200. Attained results are essential for the synthesis of refractory coatings based on high-temperature fillers and their applications in Lost Foam casting process for manufacturing of moldings with in-advance-set properties.
PB  - Polska Akad Nauk, Polish Acad Sciences, Inst Metall & Mater Sci Pas, Warszawa
T2  - Archives of Metallurgy and Materials
T1  - Synthesis and characterization of new refractory coatings based on talc, cordierite, zircon and mullite fillers for lost foam casting process
EP  - 95
IS  - 1
SP  - 89
VL  - 59
DO  - 10.2478/amm-2014-0015
ER  - 

@article{
author = "Prstić, Aurel and Aćimović-Pavlović, Zagorka and Terzić, Anja and Pavlović, Ljubica",
year = "2014",
abstract = "Refractory coatings based on different refractory fillers (talc, cordierite, zircon and mullite) for application in Lost Foam casting process were investigated. Design and optimization of the coatings composition with controlled, rheological properties included, and consequently synthesis were achieved by application of different coating components, namely different suspension agents and fillers and by alteration of the coating production procedure. Morphologic and microstructural analysis of fillers was carried out by means of scanning electronic microscope. X-ray diffraction analysis by means of X-ray diffractometer was applied in determination and monitoring the phase composition changes of the refractory fillers. An analysis of the particle size and shape was carried out by means of the PC software application package OZARIA 2.5. To assess the effects of application of individual refractory coatings, a detailed investigation of structural and mechanical properties of the moldings obtained was performed. Highlight was placed on revealing and analyzing surface and volume defects present on moldings. Radiographic molding tests were carried out by means of the X-ray device SAIFORT type-S200. Attained results are essential for the synthesis of refractory coatings based on high-temperature fillers and their applications in Lost Foam casting process for manufacturing of moldings with in-advance-set properties.",
publisher = "Polska Akad Nauk, Polish Acad Sciences, Inst Metall & Mater Sci Pas, Warszawa",
journal = "Archives of Metallurgy and Materials",
title = "Synthesis and characterization of new refractory coatings based on talc, cordierite, zircon and mullite fillers for lost foam casting process",
pages = "95-89",
number = "1",
volume = "59",
doi = "10.2478/amm-2014-0015"
}

Prstić, A., Aćimović-Pavlović, Z., Terzić, A.,& Pavlović, L.. (2014). Synthesis and characterization of new refractory coatings based on talc, cordierite, zircon and mullite fillers for lost foam casting process. in Archives of Metallurgy and Materials
Polska Akad Nauk, Polish Acad Sciences, Inst Metall & Mater Sci Pas, Warszawa., 59(1), 89-95.
https://doi.org/10.2478/amm-2014-0015

Prstić A, Aćimović-Pavlović Z, Terzić A, Pavlović L. Synthesis and characterization of new refractory coatings based on talc, cordierite, zircon and mullite fillers for lost foam casting process. in Archives of Metallurgy and Materials. 2014;59(1):89-95.
doi:10.2478/amm-2014-0015 .

Prstić, Aurel, Aćimović-Pavlović, Zagorka, Terzić, Anja, Pavlović, Ljubica, "Synthesis and characterization of new refractory coatings based on talc, cordierite, zircon and mullite fillers for lost foam casting process" in Archives of Metallurgy and Materials, 59, no. 1 (2014):89-95,
https://doi.org/10.2478/amm-2014-0015 . .

TY  - JOUR
AU  - Prstić, Aurel
AU  - Aćimović-Pavlović, Zagorka
AU  - Terzić, Anja
AU  - Pavlović, Ljubica
AU  - Grujić, Snezana
PY  - 2014
UR  - http://rims.institutims.rs/handle/123456789/250
AB  - In this study, new refractory coatings based on synthesized cordierite for the casting applications were developed. The investigation included starting raw materials characterization, synthesis of the cordierite, design of the refractory coating as final product, and its application testing. The obtained results pointed out that coating suspension sediment stability was crucial quality parameter. Design and optimization of the coatings composition, with controlled rheological properties included, were achieved by application of different coating components, namely different suspension agents and by alteration of the coating production procedure. Cordierite, used as filler, was obtained by means of synthesis in the solid-state reaction on the basis of talc, kaolin, and alumina. The investigation showed that the application of these particular types of water/alcohol-based coatings has positive influence on surface quality and structural and mechanical properties of the castings of aluminum alloys obtained by casting into sand molds by means of evaporable models method, that is, evaporate pattern casting process.
PB  - Wiley, Hoboken
T2  - International Journal of Applied Ceramic Technology
T1  - Development of New Cordierite-Based Refractory Coatings for Casting Applications
EP  - 331
IS  - 2
SP  - 321
VL  - 11
DO  - 10.1111/ijac.12010
ER  - 

@article{
author = "Prstić, Aurel and Aćimović-Pavlović, Zagorka and Terzić, Anja and Pavlović, Ljubica and Grujić, Snezana",
year = "2014",
abstract = "In this study, new refractory coatings based on synthesized cordierite for the casting applications were developed. The investigation included starting raw materials characterization, synthesis of the cordierite, design of the refractory coating as final product, and its application testing. The obtained results pointed out that coating suspension sediment stability was crucial quality parameter. Design and optimization of the coatings composition, with controlled rheological properties included, were achieved by application of different coating components, namely different suspension agents and by alteration of the coating production procedure. Cordierite, used as filler, was obtained by means of synthesis in the solid-state reaction on the basis of talc, kaolin, and alumina. The investigation showed that the application of these particular types of water/alcohol-based coatings has positive influence on surface quality and structural and mechanical properties of the castings of aluminum alloys obtained by casting into sand molds by means of evaporable models method, that is, evaporate pattern casting process.",
publisher = "Wiley, Hoboken",
journal = "International Journal of Applied Ceramic Technology",
title = "Development of New Cordierite-Based Refractory Coatings for Casting Applications",
pages = "331-321",
number = "2",
volume = "11",
doi = "10.1111/ijac.12010"
}

Prstić, A., Aćimović-Pavlović, Z., Terzić, A., Pavlović, L.,& Grujić, S.. (2014). Development of New Cordierite-Based Refractory Coatings for Casting Applications. in International Journal of Applied Ceramic Technology
Wiley, Hoboken., 11(2), 321-331.
https://doi.org/10.1111/ijac.12010

Prstić A, Aćimović-Pavlović Z, Terzić A, Pavlović L, Grujić S. Development of New Cordierite-Based Refractory Coatings for Casting Applications. in International Journal of Applied Ceramic Technology. 2014;11(2):321-331.
doi:10.1111/ijac.12010 .

Prstić, Aurel, Aćimović-Pavlović, Zagorka, Terzić, Anja, Pavlović, Ljubica, Grujić, Snezana, "Development of New Cordierite-Based Refractory Coatings for Casting Applications" in International Journal of Applied Ceramic Technology, 11, no. 2 (2014):321-331,
https://doi.org/10.1111/ijac.12010 . .

TY  - JOUR
AU  - Prstić, Aurel
AU  - Aćimović-Pavlović, Zagorka
AU  - Andrić, Ljubiša
AU  - Stojanović, Jovica
AU  - Terzić, Anja
PY  - 2012
UR  - http://rims.institutims.rs/handle/123456789/194
AB  - U ovom radu je istraživana mogućnost dobijanja novih vatrostalnih premaza na bazi cirkona koji bi imali primenu u livarstvu. Optimizacija sastava premaza kontrolisana reološkim svojstvima postignuta je primenom različitih komponenata premaza, naročito primenom novog veziva na bazi suspenzije i variranjem načina spravljanja premaza. Čestice cirkonskoh praha veličine 25×10-6 m su korišćene kao ispuna. Uzorak cirkona ispitivan je pomoću sledećih metoda: difrakcija X-zraka, diferencijalna termalna analiza i mikroskopija. Oblik i veličina zrna su analizirani pomoću računarskog programa za analizu slike OZARIA 2.5. Pokazano je da primena ovih premaza na bazi vode i alkohola ima pozitivan uticaj na kvalitet površine, tj. na strukturne i mehaničke karakteristike odlivaka livenog gvožđa koji su dobijeni metodom livenja u peščane kalupe i pomoću isparljivih modela (Lost Foam metoda livenja).
AB  - In this work, a possibility to develop a new zircon-based refractory coating for casting applications was investigated. Optimization of the coating composition with controlled rheological properties was attained by application of different coating components, particularly by application of a new suspension agent and by alteration of coating production procedure. Zircon powder with particle size of 25×10-6 m was used as filler. The zircon sample was investigated by means of X-ray diffraction analysis, diffraction thermal analysis and polarized microscopy. The shape and grain size were analyzed using OZARIA 2.5 software. It was shown that application of this type of water-alcohol-based coating had a positive influence on surface quality, structural and mechanical properties of the castings of cast iron obtained by pouring into sand molds by means of the expandable patterns method (Lost Foam casting process).
PB  - Savez hemijskih inženjera, Beograd
T2  - Chemical Industry and Chemical Engineering Quarterly / CICEQ
T1  - Premazi na bazi cirkona sa primenom u Lost Foam procesu livenja
T1  - Zircon-based coating for the applications in Lost Foam casting process
EP  - 593
IS  - 4
SP  - 587
VL  - 18
DO  - 10.2298/CICEQ111122034P
ER  - 

@article{
author = "Prstić, Aurel and Aćimović-Pavlović, Zagorka and Andrić, Ljubiša and Stojanović, Jovica and Terzić, Anja",
year = "2012",
abstract = "U ovom radu je istraživana mogućnost dobijanja novih vatrostalnih premaza na bazi cirkona koji bi imali primenu u livarstvu. Optimizacija sastava premaza kontrolisana reološkim svojstvima postignuta je primenom različitih komponenata premaza, naročito primenom novog veziva na bazi suspenzije i variranjem načina spravljanja premaza. Čestice cirkonskoh praha veličine 25×10-6 m su korišćene kao ispuna. Uzorak cirkona ispitivan je pomoću sledećih metoda: difrakcija X-zraka, diferencijalna termalna analiza i mikroskopija. Oblik i veličina zrna su analizirani pomoću računarskog programa za analizu slike OZARIA 2.5. Pokazano je da primena ovih premaza na bazi vode i alkohola ima pozitivan uticaj na kvalitet površine, tj. na strukturne i mehaničke karakteristike odlivaka livenog gvožđa koji su dobijeni metodom livenja u peščane kalupe i pomoću isparljivih modela (Lost Foam metoda livenja)., In this work, a possibility to develop a new zircon-based refractory coating for casting applications was investigated. Optimization of the coating composition with controlled rheological properties was attained by application of different coating components, particularly by application of a new suspension agent and by alteration of coating production procedure. Zircon powder with particle size of 25×10-6 m was used as filler. The zircon sample was investigated by means of X-ray diffraction analysis, diffraction thermal analysis and polarized microscopy. The shape and grain size were analyzed using OZARIA 2.5 software. It was shown that application of this type of water-alcohol-based coating had a positive influence on surface quality, structural and mechanical properties of the castings of cast iron obtained by pouring into sand molds by means of the expandable patterns method (Lost Foam casting process).",
publisher = "Savez hemijskih inženjera, Beograd",
journal = "Chemical Industry and Chemical Engineering Quarterly / CICEQ",
title = "Premazi na bazi cirkona sa primenom u Lost Foam procesu livenja, Zircon-based coating for the applications in Lost Foam casting process",
pages = "593-587",
number = "4",
volume = "18",
doi = "10.2298/CICEQ111122034P"
}

Prstić, A., Aćimović-Pavlović, Z., Andrić, L., Stojanović, J.,& Terzić, A.. (2012). Premazi na bazi cirkona sa primenom u Lost Foam procesu livenja. in Chemical Industry and Chemical Engineering Quarterly / CICEQ
Savez hemijskih inženjera, Beograd., 18(4), 587-593.
https://doi.org/10.2298/CICEQ111122034P

Prstić A, Aćimović-Pavlović Z, Andrić L, Stojanović J, Terzić A. Premazi na bazi cirkona sa primenom u Lost Foam procesu livenja. in Chemical Industry and Chemical Engineering Quarterly / CICEQ. 2012;18(4):587-593.
doi:10.2298/CICEQ111122034P .

Prstić, Aurel, Aćimović-Pavlović, Zagorka, Andrić, Ljubiša, Stojanović, Jovica, Terzić, Anja, "Premazi na bazi cirkona sa primenom u Lost Foam procesu livenja" in Chemical Industry and Chemical Engineering Quarterly / CICEQ, 18, no. 4 (2012):587-593,
https://doi.org/10.2298/CICEQ111122034P . .

TY  - JOUR
AU  - Prstić, Aurel
AU  - Aćimović-Pavlović, Zagorka
AU  - Durić, Milutin
AU  - Terzić, Anja
AU  - Pavlović, Ljubica
PY  - 2012
UR  - http://rims.institutims.rs/handle/123456789/180
AB  - In this work, a possibility to develop new ceramic coats based corundum for casting applications has been examined. Optimization of coating composition with controlled rheological properties was attained by applying different coating components, and by alteration of coating production procedure. As filler, corundum powder with particle size of 20x10(-6) m and 40x10(-6) m was used. The corundum sample was tested by the following methods: X-ray diffraction analysis and with polarized microscope. The shape and grain size were analyzed by the program package OZARIA 2.5. It was shown that application of this type of water-alcohol-based coating had a positive influence on surface quality, structural and mechanical properties of the castings of Fe-C and Al alloys obtained by casting into sand molds, according to the method of expandable patterns (EPC process).
PB  - Editura Stiintifica Fmr, Bucharest
T2  - Metalurgia International
T1  - Synthesis, characterization and application of the filler based on corundum for obtaining the ceramic coats in foundry
EP  - 87
IS  - 3
SP  - 83
VL  - 17
UR  - https://hdl.handle.net/21.15107/rcub_rims_180
ER  - 

@article{
author = "Prstić, Aurel and Aćimović-Pavlović, Zagorka and Durić, Milutin and Terzić, Anja and Pavlović, Ljubica",
year = "2012",
abstract = "In this work, a possibility to develop new ceramic coats based corundum for casting applications has been examined. Optimization of coating composition with controlled rheological properties was attained by applying different coating components, and by alteration of coating production procedure. As filler, corundum powder with particle size of 20x10(-6) m and 40x10(-6) m was used. The corundum sample was tested by the following methods: X-ray diffraction analysis and with polarized microscope. The shape and grain size were analyzed by the program package OZARIA 2.5. It was shown that application of this type of water-alcohol-based coating had a positive influence on surface quality, structural and mechanical properties of the castings of Fe-C and Al alloys obtained by casting into sand molds, according to the method of expandable patterns (EPC process).",
publisher = "Editura Stiintifica Fmr, Bucharest",
journal = "Metalurgia International",
title = "Synthesis, characterization and application of the filler based on corundum for obtaining the ceramic coats in foundry",
pages = "87-83",
number = "3",
volume = "17",
url = "https://hdl.handle.net/21.15107/rcub_rims_180"
}

Prstić, A., Aćimović-Pavlović, Z., Durić, M., Terzić, A.,& Pavlović, L.. (2012). Synthesis, characterization and application of the filler based on corundum for obtaining the ceramic coats in foundry. in Metalurgia International
Editura Stiintifica Fmr, Bucharest., 17(3), 83-87.
https://hdl.handle.net/21.15107/rcub_rims_180

Prstić A, Aćimović-Pavlović Z, Durić M, Terzić A, Pavlović L. Synthesis, characterization and application of the filler based on corundum for obtaining the ceramic coats in foundry. in Metalurgia International. 2012;17(3):83-87.
https://hdl.handle.net/21.15107/rcub_rims_180 .

Prstić, Aurel, Aćimović-Pavlović, Zagorka, Durić, Milutin, Terzić, Anja, Pavlović, Ljubica, "Synthesis, characterization and application of the filler based on corundum for obtaining the ceramic coats in foundry" in Metalurgia International, 17, no. 3 (2012):83-87,
https://hdl.handle.net/21.15107/rcub_rims_180 .

TY  - CONF
AU  - Prstić, Aurel
AU  - Aćimović-Pavlović, Zagorka
AU  - Duricić, Milutin
AU  - Terzić, Anja
AU  - Pavlović, Ljubica
AU  - Tanasković, Zorica
PY  - 2012
UR  - http://rims.institutims.rs/handle/123456789/168
AB  - In this work, a possibility to develop new chromite-based refractory linings for casting applications has been examined. Lining composition optimization with the controlled reologic properties was achieved by applying different lining components and by alteration of lining production procedure. As filler, chromite was used. The chromite sample was tested by the following methods: X-ray diffraction analysis, diffraction thermal analysis and SEM. The shape and grain size were analyzed by the program package OZARIA 2.5. It was shown that application of this type of water-alcohol-based lining had a positive influence on surface quality, structural and mechanical properties of the castings of Fe-C alloys obtained by casting into sand molds, according to the method of expandable patterns (Lost foam casting process).
PB  - ModTech Publishing House
C3  - Modtech 2012: New Face of T M C R, Vols I and II
T1  - Linings based chromite for application in foundry
EP  - 816
SP  - 813
UR  - https://hdl.handle.net/21.15107/rcub_rims_168
ER  - 

@conference{
author = "Prstić, Aurel and Aćimović-Pavlović, Zagorka and Duricić, Milutin and Terzić, Anja and Pavlović, Ljubica and Tanasković, Zorica",
year = "2012",
abstract = "In this work, a possibility to develop new chromite-based refractory linings for casting applications has been examined. Lining composition optimization with the controlled reologic properties was achieved by applying different lining components and by alteration of lining production procedure. As filler, chromite was used. The chromite sample was tested by the following methods: X-ray diffraction analysis, diffraction thermal analysis and SEM. The shape and grain size were analyzed by the program package OZARIA 2.5. It was shown that application of this type of water-alcohol-based lining had a positive influence on surface quality, structural and mechanical properties of the castings of Fe-C alloys obtained by casting into sand molds, according to the method of expandable patterns (Lost foam casting process).",
publisher = "ModTech Publishing House",
journal = "Modtech 2012: New Face of T M C R, Vols I and II",
title = "Linings based chromite for application in foundry",
pages = "816-813",
url = "https://hdl.handle.net/21.15107/rcub_rims_168"
}

Prstić, A., Aćimović-Pavlović, Z., Duricić, M., Terzić, A., Pavlović, L.,& Tanasković, Z.. (2012). Linings based chromite for application in foundry. in Modtech 2012: New Face of T M C R, Vols I and II
ModTech Publishing House., 813-816.
https://hdl.handle.net/21.15107/rcub_rims_168

Prstić A, Aćimović-Pavlović Z, Duricić M, Terzić A, Pavlović L, Tanasković Z. Linings based chromite for application in foundry. in Modtech 2012: New Face of T M C R, Vols I and II. 2012;:813-816.
https://hdl.handle.net/21.15107/rcub_rims_168 .

Prstić, Aurel, Aćimović-Pavlović, Zagorka, Duricić, Milutin, Terzić, Anja, Pavlović, Ljubica, Tanasković, Zorica, "Linings based chromite for application in foundry" in Modtech 2012: New Face of T M C R, Vols I and II (2012):813-816,
https://hdl.handle.net/21.15107/rcub_rims_168 .

TY  - CONF
AU  - Prstić, Aurel
AU  - Aćimović-Pavlović, Zagorka
AU  - Pavlović, Ljubica
AU  - Terzić, Anja
PY  - 2006
UR  - http://rims.institutims.rs/handle/123456789/529
C3  - ICOSECS5, 5th International Conference of the Chemical Societies and the South-East European Countries, Book of Abstracts
T1  - The Possibility of Application of Basalt in the Aim of Obtaining Ceramic Glazes
SP  - 391
VL  - 1
UR  - https://hdl.handle.net/21.15107/rcub_rims_529
ER  - 

@conference{
author = "Prstić, Aurel and Aćimović-Pavlović, Zagorka and Pavlović, Ljubica and Terzić, Anja",
year = "2006",
journal = "ICOSECS5, 5th International Conference of the Chemical Societies and the South-East European Countries, Book of Abstracts",
title = "The Possibility of Application of Basalt in the Aim of Obtaining Ceramic Glazes",
pages = "391",
volume = "1",
url = "https://hdl.handle.net/21.15107/rcub_rims_529"
}

Prstić, A., Aćimović-Pavlović, Z., Pavlović, L.,& Terzić, A.. (2006). The Possibility of Application of Basalt in the Aim of Obtaining Ceramic Glazes. in ICOSECS5, 5th International Conference of the Chemical Societies and the South-East European Countries, Book of Abstracts, 1, 391.
https://hdl.handle.net/21.15107/rcub_rims_529

Prstić A, Aćimović-Pavlović Z, Pavlović L, Terzić A. The Possibility of Application of Basalt in the Aim of Obtaining Ceramic Glazes. in ICOSECS5, 5th International Conference of the Chemical Societies and the South-East European Countries, Book of Abstracts. 2006;1:391.
https://hdl.handle.net/21.15107/rcub_rims_529 .

Prstić, Aurel, Aćimović-Pavlović, Zagorka, Pavlović, Ljubica, Terzić, Anja, "The Possibility of Application of Basalt in the Aim of Obtaining Ceramic Glazes" in ICOSECS5, 5th International Conference of the Chemical Societies and the South-East European Countries, Book of Abstracts, 1 (2006):391,
https://hdl.handle.net/21.15107/rcub_rims_529 .