TY  - JOUR
AU  - Dražić, Gordana
AU  - Opričić, Mario
AU  - Spasojević-Šantić, Tea
AU  - Milošević, Dragana
PY  - 2016
UR  - http://rims.institutims.rs/handle/123456789/419
AB  - Cilj ovog rada je uporedna analiza rezultata dobijenih sagorevanjem briketa čiste trske Miskantusa, briketa trske pomešane sa Topolom (Populus Nigra) i čamovinom i mešavine samo Topole i čamovine. Analizom energetskih tehničkih karakteristika briketa poreklom od hibridne vrste Mischantus x giganteus ustanovljeno je da velika produkcija biomase po jedinici površine (10/30 t/ha godišnje) može nadomestiti manjkavosti koje se ogledaju u većem sadržaju pepela (3,3%) i koksa (18,3%), odnosno nešto niže toplotne moći 16,08 MJ/kg u odnosu na brikete od drvne biomase. Predlaže se izrada briketa koji su mešavina Miskantusa i neke druge vrste biomase, gde bi procentualno Miskantus imao veći udeo. Ovim bi se dobili kompaktni briketi, sa niskim procentom vlage, pepela, koksnog ostatka, i zadovoljavajuće toplotne moći, što je i dokazano mešanjem Miskantusa sa Toplom i čamovinom u masenom odnosu 50:25:25. Takođe se može zaključiti da je ekološki i ekonomski isplativije proizvoditi brikete koji imaju veći sadržaj Miskantusa, a manji sadržaj drvne biomase čiji je period razvoja i rasta mnogo duži.
T2  - Energija, ekonomija, ekologija, Vol. 1-2 god XVIII, pp. 74 - 80
T1  - Energetske karakteristike briketa od biomase Miskantusa
VL  - 1-2
UR  - https://hdl.handle.net/21.15107/rcub_rims_419
ER  - 

@article{
author = "Dražić, Gordana and Opričić, Mario and Spasojević-Šantić, Tea and Milošević, Dragana",
year = "2016",
abstract = "Cilj ovog rada je uporedna analiza rezultata dobijenih sagorevanjem briketa čiste trske Miskantusa, briketa trske pomešane sa Topolom (Populus Nigra) i čamovinom i mešavine samo Topole i čamovine. Analizom energetskih tehničkih karakteristika briketa poreklom od hibridne vrste Mischantus x giganteus ustanovljeno je da velika produkcija biomase po jedinici površine (10/30 t/ha godišnje) može nadomestiti manjkavosti koje se ogledaju u većem sadržaju pepela (3,3%) i koksa (18,3%), odnosno nešto niže toplotne moći 16,08 MJ/kg u odnosu na brikete od drvne biomase. Predlaže se izrada briketa koji su mešavina Miskantusa i neke druge vrste biomase, gde bi procentualno Miskantus imao veći udeo. Ovim bi se dobili kompaktni briketi, sa niskim procentom vlage, pepela, koksnog ostatka, i zadovoljavajuće toplotne moći, što je i dokazano mešanjem Miskantusa sa Toplom i čamovinom u masenom odnosu 50:25:25. Takođe se može zaključiti da je ekološki i ekonomski isplativije proizvoditi brikete koji imaju veći sadržaj Miskantusa, a manji sadržaj drvne biomase čiji je period razvoja i rasta mnogo duži.",
journal = "Energija, ekonomija, ekologija, Vol. 1-2 god XVIII, pp. 74 - 80",
title = "Energetske karakteristike briketa od biomase Miskantusa",
volume = "1-2",
url = "https://hdl.handle.net/21.15107/rcub_rims_419"
}

Dražić, G., Opričić, M., Spasojević-Šantić, T.,& Milošević, D.. (2016). Energetske karakteristike briketa od biomase Miskantusa. in Energija, ekonomija, ekologija, Vol. 1-2 god XVIII, pp. 74 - 80, 1-2.
https://hdl.handle.net/21.15107/rcub_rims_419

Dražić G, Opričić M, Spasojević-Šantić T, Milošević D. Energetske karakteristike briketa od biomase Miskantusa. in Energija, ekonomija, ekologija, Vol. 1-2 god XVIII, pp. 74 - 80. 2016;1-2.
https://hdl.handle.net/21.15107/rcub_rims_419 .

Dražić, Gordana, Opričić, Mario, Spasojević-Šantić, Tea, Milošević, Dragana, "Energetske karakteristike briketa od biomase Miskantusa" in Energija, ekonomija, ekologija, Vol. 1-2 god XVIII, pp. 74 - 80, 1-2 (2016),
https://hdl.handle.net/21.15107/rcub_rims_419 .

TY  - JOUR
AU  - Prstić, Aurel
AU  - Aćimović-Pavlović, Zagorka
AU  - Terzić, Anja
AU  - Pavlović, Ljubica
AU  - Grujić, Snezana
PY  - 2014
UR  - http://rims.institutims.rs/handle/123456789/250
AB  - In this study, new refractory coatings based on synthesized cordierite for the casting applications were developed. The investigation included starting raw materials characterization, synthesis of the cordierite, design of the refractory coating as final product, and its application testing. The obtained results pointed out that coating suspension sediment stability was crucial quality parameter. Design and optimization of the coatings composition, with controlled rheological properties included, were achieved by application of different coating components, namely different suspension agents and by alteration of the coating production procedure. Cordierite, used as filler, was obtained by means of synthesis in the solid-state reaction on the basis of talc, kaolin, and alumina. The investigation showed that the application of these particular types of water/alcohol-based coatings has positive influence on surface quality and structural and mechanical properties of the castings of aluminum alloys obtained by casting into sand molds by means of evaporable models method, that is, evaporate pattern casting process.
PB  - Wiley, Hoboken
T2  - International Journal of Applied Ceramic Technology
T1  - Development of New Cordierite-Based Refractory Coatings for Casting Applications
EP  - 331
IS  - 2
SP  - 321
VL  - 11
DO  - 10.1111/ijac.12010
ER  - 

@article{
author = "Prstić, Aurel and Aćimović-Pavlović, Zagorka and Terzić, Anja and Pavlović, Ljubica and Grujić, Snezana",
year = "2014",
abstract = "In this study, new refractory coatings based on synthesized cordierite for the casting applications were developed. The investigation included starting raw materials characterization, synthesis of the cordierite, design of the refractory coating as final product, and its application testing. The obtained results pointed out that coating suspension sediment stability was crucial quality parameter. Design and optimization of the coatings composition, with controlled rheological properties included, were achieved by application of different coating components, namely different suspension agents and by alteration of the coating production procedure. Cordierite, used as filler, was obtained by means of synthesis in the solid-state reaction on the basis of talc, kaolin, and alumina. The investigation showed that the application of these particular types of water/alcohol-based coatings has positive influence on surface quality and structural and mechanical properties of the castings of aluminum alloys obtained by casting into sand molds by means of evaporable models method, that is, evaporate pattern casting process.",
publisher = "Wiley, Hoboken",
journal = "International Journal of Applied Ceramic Technology",
title = "Development of New Cordierite-Based Refractory Coatings for Casting Applications",
pages = "331-321",
number = "2",
volume = "11",
doi = "10.1111/ijac.12010"
}

Prstić, A., Aćimović-Pavlović, Z., Terzić, A., Pavlović, L.,& Grujić, S.. (2014). Development of New Cordierite-Based Refractory Coatings for Casting Applications. in International Journal of Applied Ceramic Technology
Wiley, Hoboken., 11(2), 321-331.
https://doi.org/10.1111/ijac.12010

Prstić A, Aćimović-Pavlović Z, Terzić A, Pavlović L, Grujić S. Development of New Cordierite-Based Refractory Coatings for Casting Applications. in International Journal of Applied Ceramic Technology. 2014;11(2):321-331.
doi:10.1111/ijac.12010 .

Prstić, Aurel, Aćimović-Pavlović, Zagorka, Terzić, Anja, Pavlović, Ljubica, Grujić, Snezana, "Development of New Cordierite-Based Refractory Coatings for Casting Applications" in International Journal of Applied Ceramic Technology, 11, no. 2 (2014):321-331,
https://doi.org/10.1111/ijac.12010 . .