TY  - JOUR
AU  - Vasić, Milica
AU  - Pezo, Lato
AU  - Vasić, Miloš
AU  - Mijatović, Nevenka
AU  - Mitrić, Miodrag
AU  - Radojević, Zagorka
PY  - 2020
UR  - http://rims.institutims.rs/handle/123456789/382
AB  - This study presents the 51 mixtures of ceramic clays characterized by using XRF, XRD, granulometry, and dilatometry analyses. After firing in a 1000-1250 °C range, water absorption (WA) according to EN standards by boiling in water, under vacuum, and by 24 h soaking is determined. The results indicated that there was a high and statistically significant correlation between the standard methods, but the testing under vacuum gave the highest saturation of the samples fired at 1200 °C and 1250 °C. It is determined that these illitic-kaolinitic clays can be used to produce floor ceramic tiles belonging to the BIIa group (water absorption between 3% and 6%). The study also aimed to reveal which method of WA determination is suitable to read the sintering interval from the gresification diagrams, which is compared to the beginning of sintering as read from dilatometry curves.
PB  - Sociedad Espanola de Ceramica y Vidrio
T2  - Boletin de la Sociedad Espanola de Ceramica y Vidrio
T1  - What is the most relevant method for water absorption determination in ceramic tiles produced by illitic-kaolinitic clays? The mystery behind the gresification diagram
DO  - 10.1016/j.bsecv.2020.11.006
ER  - 

@article{
author = "Vasić, Milica and Pezo, Lato and Vasić, Miloš and Mijatović, Nevenka and Mitrić, Miodrag and Radojević, Zagorka",
year = "2020",
abstract = "This study presents the 51 mixtures of ceramic clays characterized by using XRF, XRD, granulometry, and dilatometry analyses. After firing in a 1000-1250 °C range, water absorption (WA) according to EN standards by boiling in water, under vacuum, and by 24 h soaking is determined. The results indicated that there was a high and statistically significant correlation between the standard methods, but the testing under vacuum gave the highest saturation of the samples fired at 1200 °C and 1250 °C. It is determined that these illitic-kaolinitic clays can be used to produce floor ceramic tiles belonging to the BIIa group (water absorption between 3% and 6%). The study also aimed to reveal which method of WA determination is suitable to read the sintering interval from the gresification diagrams, which is compared to the beginning of sintering as read from dilatometry curves.",
publisher = "Sociedad Espanola de Ceramica y Vidrio",
journal = "Boletin de la Sociedad Espanola de Ceramica y Vidrio",
title = "What is the most relevant method for water absorption determination in ceramic tiles produced by illitic-kaolinitic clays? The mystery behind the gresification diagram",
doi = "10.1016/j.bsecv.2020.11.006"
}

Vasić, M., Pezo, L., Vasić, M., Mijatović, N., Mitrić, M.,& Radojević, Z.. (2020). What is the most relevant method for water absorption determination in ceramic tiles produced by illitic-kaolinitic clays? The mystery behind the gresification diagram. in Boletin de la Sociedad Espanola de Ceramica y Vidrio
Sociedad Espanola de Ceramica y Vidrio..
https://doi.org/10.1016/j.bsecv.2020.11.006

Vasić M, Pezo L, Vasić M, Mijatović N, Mitrić M, Radojević Z. What is the most relevant method for water absorption determination in ceramic tiles produced by illitic-kaolinitic clays? The mystery behind the gresification diagram. in Boletin de la Sociedad Espanola de Ceramica y Vidrio. 2020;.
doi:10.1016/j.bsecv.2020.11.006 .

Vasić, Milica, Pezo, Lato, Vasić, Miloš, Mijatović, Nevenka, Mitrić, Miodrag, Radojević, Zagorka, "What is the most relevant method for water absorption determination in ceramic tiles produced by illitic-kaolinitic clays? The mystery behind the gresification diagram" in Boletin de la Sociedad Espanola de Ceramica y Vidrio (2020),
https://doi.org/10.1016/j.bsecv.2020.11.006 . .

TY  - JOUR
AU  - Terzić, Anja
AU  - Đorđević, Nataša
AU  - Mitrić, Miodrag
AU  - Marković, Smilja
AU  - Đorđević, Katarina
AU  - Pavlović, Vladimir
PY  - 2017
UR  - http://rims.institutims.rs/handle/123456789/319
AB  - Due to pozzolanic characteristics, fly ash is commonly used as a cement replacement in construction composites. Addition of natural clays with sorption ability (i.e. zeolite and bentonite) in to the fly ash based construction materials is of both scientific and industrial interest. Namely, due to the application of sorptive clay minerals, it is possible to immobilize toxic heavy metals from the composite structure. The thermal compatibility of fly ash and zeolite, as well as fly ash and bentonite, within the composite was observed during sintering procedure. The starting components were used in 1: 1 ratio and they were applied without additional mechanical treatment. The used compaction pressure for the tablets was 2 t.cm(-2). The sintering process was conducted at 1000 degrees C and 1200 degrees C for two hours in the air atmosphere. The mineralogical phase composition of the non-treated and sintered samples was analyzed using X-ray diffraction method. Scanning electron microscopy was applied in the analysis of the microstructure of starting and sintered samples. The thermal behavior was observed via DTA method. The influence of temperature on the properties of fly ash-zeolite and fly ash-bentonite composites was investigated.
PB  - Međunarodni Institut za nauku o sinterovanju, Beograd
T2  - Science of Sintering
T1  - Sintering of Fly Ash Based Composites with Zeolite and Bentonite Addition for Application in Construction Materials
EP  - 37
IS  - 1
SP  - 23
VL  - 49
DO  - 10.2298/SOS1701023T
ER  - 

@article{
author = "Terzić, Anja and Đorđević, Nataša and Mitrić, Miodrag and Marković, Smilja and Đorđević, Katarina and Pavlović, Vladimir",
year = "2017",
abstract = "Due to pozzolanic characteristics, fly ash is commonly used as a cement replacement in construction composites. Addition of natural clays with sorption ability (i.e. zeolite and bentonite) in to the fly ash based construction materials is of both scientific and industrial interest. Namely, due to the application of sorptive clay minerals, it is possible to immobilize toxic heavy metals from the composite structure. The thermal compatibility of fly ash and zeolite, as well as fly ash and bentonite, within the composite was observed during sintering procedure. The starting components were used in 1: 1 ratio and they were applied without additional mechanical treatment. The used compaction pressure for the tablets was 2 t.cm(-2). The sintering process was conducted at 1000 degrees C and 1200 degrees C for two hours in the air atmosphere. The mineralogical phase composition of the non-treated and sintered samples was analyzed using X-ray diffraction method. Scanning electron microscopy was applied in the analysis of the microstructure of starting and sintered samples. The thermal behavior was observed via DTA method. The influence of temperature on the properties of fly ash-zeolite and fly ash-bentonite composites was investigated.",
publisher = "Međunarodni Institut za nauku o sinterovanju, Beograd",
journal = "Science of Sintering",
title = "Sintering of Fly Ash Based Composites with Zeolite and Bentonite Addition for Application in Construction Materials",
pages = "37-23",
number = "1",
volume = "49",
doi = "10.2298/SOS1701023T"
}

Terzić, A., Đorđević, N., Mitrić, M., Marković, S., Đorđević, K.,& Pavlović, V.. (2017). Sintering of Fly Ash Based Composites with Zeolite and Bentonite Addition for Application in Construction Materials. in Science of Sintering
Međunarodni Institut za nauku o sinterovanju, Beograd., 49(1), 23-37.
https://doi.org/10.2298/SOS1701023T

Terzić A, Đorđević N, Mitrić M, Marković S, Đorđević K, Pavlović V. Sintering of Fly Ash Based Composites with Zeolite and Bentonite Addition for Application in Construction Materials. in Science of Sintering. 2017;49(1):23-37.
doi:10.2298/SOS1701023T .

Terzić, Anja, Đorđević, Nataša, Mitrić, Miodrag, Marković, Smilja, Đorđević, Katarina, Pavlović, Vladimir, "Sintering of Fly Ash Based Composites with Zeolite and Bentonite Addition for Application in Construction Materials" in Science of Sintering, 49, no. 1 (2017):23-37,
https://doi.org/10.2298/SOS1701023T . .