TY  - JOUR
AU  - Pavlović, Marko
AU  - Terzić, Anja
AU  - Dojčinović, Marina
AU  - Radulović, Dragan
PY  - 2024
UR  - http://rims.institutims.rs/handle/123456789/817
AB  - The performance of thermo-insulation rendering mortars with alternations in ratios of powdered cordierite and talc was examined. The goal was to confirm that recycled kilnware cordierite can be reapplied in the mortar design without significant deterioration in performance in comparison with OPC mortar. Differential thermal analysis was employed for examining thermally induced reactions. The cavitation erosion, in testing sequences ranging from 30 to 120 minutes, was used to assess the compactness of the mortar structure. The physico-mechanical properties of experimental mortars were investigated. The morphologies of the mortar tablets upon cavitation were studied using a scanning electron microscope. It was established that cordierite and talc filler in amounts up to 20% enhance microstructural packing and mechanical strengths due to improved cementation and therefore contribute to cavitation erosion resistance. Higher amounts of talc cause structural degradation and mass loss during cavitation tests. Reducing manufacturing costs, energy consumption, and greenhouse gas emissions are the main objectives of the production of this waste-based construction composite, as the reuse of waste materials can help achieve a number of Sustainable Development Goals.
PB  - Association for ETRAN Society
T2  - Science of Sintering OnLine-First Issue 00
T1  - Developing thermal insulation cement-based mortars with recycled aggregate in accordance with net zero principles
DO  - 10.2298/SOS231215002P
ER  - 

@article{
author = "Pavlović, Marko and Terzić, Anja and Dojčinović, Marina and Radulović, Dragan",
year = "2024",
abstract = "The performance of thermo-insulation rendering mortars with alternations in ratios of powdered cordierite and talc was examined. The goal was to confirm that recycled kilnware cordierite can be reapplied in the mortar design without significant deterioration in performance in comparison with OPC mortar. Differential thermal analysis was employed for examining thermally induced reactions. The cavitation erosion, in testing sequences ranging from 30 to 120 minutes, was used to assess the compactness of the mortar structure. The physico-mechanical properties of experimental mortars were investigated. The morphologies of the mortar tablets upon cavitation were studied using a scanning electron microscope. It was established that cordierite and talc filler in amounts up to 20% enhance microstructural packing and mechanical strengths due to improved cementation and therefore contribute to cavitation erosion resistance. Higher amounts of talc cause structural degradation and mass loss during cavitation tests. Reducing manufacturing costs, energy consumption, and greenhouse gas emissions are the main objectives of the production of this waste-based construction composite, as the reuse of waste materials can help achieve a number of Sustainable Development Goals.",
publisher = "Association for ETRAN Society",
journal = "Science of Sintering OnLine-First Issue 00",
title = "Developing thermal insulation cement-based mortars with recycled aggregate in accordance with net zero principles",
doi = "10.2298/SOS231215002P"
}

Pavlović, M., Terzić, A., Dojčinović, M.,& Radulović, D.. (2024). Developing thermal insulation cement-based mortars with recycled aggregate in accordance with net zero principles. in Science of Sintering OnLine-First Issue 00
Association for ETRAN Society..
https://doi.org/10.2298/SOS231215002P

Pavlović M, Terzić A, Dojčinović M, Radulović D. Developing thermal insulation cement-based mortars with recycled aggregate in accordance with net zero principles. in Science of Sintering OnLine-First Issue 00. 2024;.
doi:10.2298/SOS231215002P .

Pavlović, Marko, Terzić, Anja, Dojčinović, Marina, Radulović, Dragan, "Developing thermal insulation cement-based mortars with recycled aggregate in accordance with net zero principles" in Science of Sintering OnLine-First Issue 00 (2024),
https://doi.org/10.2298/SOS231215002P . .

TY  - CONF
AU  - Zečević, Bojana
AU  - Maksimović, Ana
AU  - Milović, Ljubica
AU  - Bulatović, Srđan
AU  - Aleksić, Vujadin
PY  - 2022
UR  - http://rims.institutims.rs/handle/123456789/847
AB  - Steel grade 14MoV6 3 is used for manufacturing of boilers and steam pipelines designed for steam temperatures up to 560°C. This paper presents the experimental analysis which included impact toughness test. The analysis resulted in impact energy values, and their respective components, crack initiation and crack propagation energy, and represents the initial stage of extensive research involving the behavior of 14MoV6 3 steel. The aim was to determine the effects of temperature (room vs. operated), as well as the effects of specimen orientation with regards to the rolling direction, on the impact toughness and the relation between its components.
PB  - Elsevier
C3  - Procedia Structural Integrity 23 European Conference on Fracture - ECF23
T1  - Effect of temperature and specimen orientation on Charpy impact toughness
EP  - 1482
SP  - 1475
VL  - 42
DO  - 10.1016/j.prostr.2022.12.188
ER  - 

@conference{
author = "Zečević, Bojana and Maksimović, Ana and Milović, Ljubica and Bulatović, Srđan and Aleksić, Vujadin",
year = "2022",
abstract = "Steel grade 14MoV6 3 is used for manufacturing of boilers and steam pipelines designed for steam temperatures up to 560°C. This paper presents the experimental analysis which included impact toughness test. The analysis resulted in impact energy values, and their respective components, crack initiation and crack propagation energy, and represents the initial stage of extensive research involving the behavior of 14MoV6 3 steel. The aim was to determine the effects of temperature (room vs. operated), as well as the effects of specimen orientation with regards to the rolling direction, on the impact toughness and the relation between its components.",
publisher = "Elsevier",
journal = "Procedia Structural Integrity 23 European Conference on Fracture - ECF23",
title = "Effect of temperature and specimen orientation on Charpy impact toughness",
pages = "1482-1475",
volume = "42",
doi = "10.1016/j.prostr.2022.12.188"
}

Zečević, B., Maksimović, A., Milović, L., Bulatović, S.,& Aleksić, V.. (2022). Effect of temperature and specimen orientation on Charpy impact toughness. in Procedia Structural Integrity 23 European Conference on Fracture - ECF23
Elsevier., 42, 1475-1482.
https://doi.org/10.1016/j.prostr.2022.12.188

Zečević B, Maksimović A, Milović L, Bulatović S, Aleksić V. Effect of temperature and specimen orientation on Charpy impact toughness. in Procedia Structural Integrity 23 European Conference on Fracture - ECF23. 2022;42:1475-1482.
doi:10.1016/j.prostr.2022.12.188 .

Zečević, Bojana, Maksimović, Ana, Milović, Ljubica, Bulatović, Srđan, Aleksić, Vujadin, "Effect of temperature and specimen orientation on Charpy impact toughness" in Procedia Structural Integrity 23 European Conference on Fracture - ECF23, 42 (2022):1475-1482,
https://doi.org/10.1016/j.prostr.2022.12.188 . .

TY  - CONF
AU  - Maksimović, Ana
AU  - Milović, Ljubica
AU  - Zečević, Bojana
AU  - Đorđević, Branislav
AU  - Bulatović, Srđan
AU  - Aleksić, Vujadin
PY  - 2022
UR  - http://rims.institutims.rs/handle/123456789/734
AB  - This paper is devoted to the ductile–brittle transition behavior of high strength low alloyed structural steel NIOMOL 490K. This steel grade is designed for welded pressure vessels exposed to dynamic loads, operating at temperatures below zero, and that is why it must have acceptable toughness. Due to its importance for the safety assessment of pressure vessels, a characterization of this steel with Charpy V-notch test in range of temperature between-60 ⁰C and +60 ⁰C was undertaken. Ductile-to-brittle transition temperature curves were generated in the present study by using instrumented Charpy pendulum impact test on V-notch specimens. Notches were located in the parent material, heat-affected zone and weld metal. The nil-ductility temperature and tensile properties in temperature range from -60 ⁰C to +60 ⁰C are presented in this paper. We used different test temperatures to better understand ductile-to brittle transition response than just use either Charpy energy or other related ductility criteria.
PB  - Elsevier B.V.
C3  - Procedia Structural Integrity
T1  - Determination of ductile-to-brittle transition temperature of NIOMOL 490K steel welded joints
EP  - 1368
SP  - 1361
VL  - 42
DO  - 10.1016/j.prostr.2022.12.173
ER  - 

@conference{
author = "Maksimović, Ana and Milović, Ljubica and Zečević, Bojana and Đorđević, Branislav and Bulatović, Srđan and Aleksić, Vujadin",
year = "2022",
abstract = "This paper is devoted to the ductile–brittle transition behavior of high strength low alloyed structural steel NIOMOL 490K. This steel grade is designed for welded pressure vessels exposed to dynamic loads, operating at temperatures below zero, and that is why it must have acceptable toughness. Due to its importance for the safety assessment of pressure vessels, a characterization of this steel with Charpy V-notch test in range of temperature between-60 ⁰C and +60 ⁰C was undertaken. Ductile-to-brittle transition temperature curves were generated in the present study by using instrumented Charpy pendulum impact test on V-notch specimens. Notches were located in the parent material, heat-affected zone and weld metal. The nil-ductility temperature and tensile properties in temperature range from -60 ⁰C to +60 ⁰C are presented in this paper. We used different test temperatures to better understand ductile-to brittle transition response than just use either Charpy energy or other related ductility criteria.",
publisher = "Elsevier B.V.",
journal = "Procedia Structural Integrity",
title = "Determination of ductile-to-brittle transition temperature of NIOMOL 490K steel welded joints",
pages = "1368-1361",
volume = "42",
doi = "10.1016/j.prostr.2022.12.173"
}

Maksimović, A., Milović, L., Zečević, B., Đorđević, B., Bulatović, S.,& Aleksić, V.. (2022). Determination of ductile-to-brittle transition temperature of NIOMOL 490K steel welded joints. in Procedia Structural Integrity
Elsevier B.V.., 42, 1361-1368.
https://doi.org/10.1016/j.prostr.2022.12.173

Maksimović A, Milović L, Zečević B, Đorđević B, Bulatović S, Aleksić V. Determination of ductile-to-brittle transition temperature of NIOMOL 490K steel welded joints. in Procedia Structural Integrity. 2022;42:1361-1368.
doi:10.1016/j.prostr.2022.12.173 .

Maksimović, Ana, Milović, Ljubica, Zečević, Bojana, Đorđević, Branislav, Bulatović, Srđan, Aleksić, Vujadin, "Determination of ductile-to-brittle transition temperature of NIOMOL 490K steel welded joints" in Procedia Structural Integrity, 42 (2022):1361-1368,
https://doi.org/10.1016/j.prostr.2022.12.173 . .

TY  - CONF
AU  - Zečević, Bojana
AU  - Maksimović, Ana
AU  - Milović, Ljubica
AU  - Aleksić, Vujadin
AU  - Grbović, Aleksandar
AU  - Bulatović, Srđan
PY  - 2022
UR  - http://rims.institutims.rs/handle/123456789/624
AB  - Steel grade 14MoV6 3 is used for manufacturing of boilers and steam pipelines designed for steam temperatures up to 560°C. This paper presents the numerical simulation of a CT-specimen, using the finite element method. The analysis was performed using Ansys Workbench R21, and represents the initial stage of extensive research involving the behaviour of 14MoV6 3 steel. The goal was to simulate the real experimental conditions, including boundary conditions and loads, which were defined in accordance with relevant standards, and to obtain representative results. The temperature dependent mechanical properties needed for the simulation of plastic behaviour of such specimens under tensile loads were obtained from the experimental data and the literature.
PB  - Elsevier B.V.
C3  - 23rd European Conference on Fracture, ECF 2022, Procedia Structural Integrity
T1  - Numerical simulation of 14Mov6-3 steel CT-specimen Fracture Behavior
VL  - 42
DO  - 10.1016/j.prostr.2022.12.189
ER  - 

@conference{
author = "Zečević, Bojana and Maksimović, Ana and Milović, Ljubica and Aleksić, Vujadin and Grbović, Aleksandar and Bulatović, Srđan",
year = "2022",
abstract = "Steel grade 14MoV6 3 is used for manufacturing of boilers and steam pipelines designed for steam temperatures up to 560°C. This paper presents the numerical simulation of a CT-specimen, using the finite element method. The analysis was performed using Ansys Workbench R21, and represents the initial stage of extensive research involving the behaviour of 14MoV6 3 steel. The goal was to simulate the real experimental conditions, including boundary conditions and loads, which were defined in accordance with relevant standards, and to obtain representative results. The temperature dependent mechanical properties needed for the simulation of plastic behaviour of such specimens under tensile loads were obtained from the experimental data and the literature.",
publisher = "Elsevier B.V.",
journal = "23rd European Conference on Fracture, ECF 2022, Procedia Structural Integrity",
title = "Numerical simulation of 14Mov6-3 steel CT-specimen Fracture Behavior",
volume = "42",
doi = "10.1016/j.prostr.2022.12.189"
}

Zečević, B., Maksimović, A., Milović, L., Aleksić, V., Grbović, A.,& Bulatović, S.. (2022). Numerical simulation of 14Mov6-3 steel CT-specimen Fracture Behavior. in 23rd European Conference on Fracture, ECF 2022, Procedia Structural Integrity
Elsevier B.V.., 42.
https://doi.org/10.1016/j.prostr.2022.12.189

Zečević B, Maksimović A, Milović L, Aleksić V, Grbović A, Bulatović S. Numerical simulation of 14Mov6-3 steel CT-specimen Fracture Behavior. in 23rd European Conference on Fracture, ECF 2022, Procedia Structural Integrity. 2022;42.
doi:10.1016/j.prostr.2022.12.189 .

Zečević, Bojana, Maksimović, Ana, Milović, Ljubica, Aleksić, Vujadin, Grbović, Aleksandar, Bulatović, Srđan, "Numerical simulation of 14Mov6-3 steel CT-specimen Fracture Behavior" in 23rd European Conference on Fracture, ECF 2022, Procedia Structural Integrity, 42 (2022),
https://doi.org/10.1016/j.prostr.2022.12.189 . .

TY  - JOUR
AU  - Radomirović, Milena
AU  - Mijatović, Nevenka
AU  - Vasić, Milica
AU  - Tanaskovski, Bojan
AU  - Mandić, Milica
AU  - Pezo, Lato
AU  - Onjia, Antonije
PY  - 2021
UR  - http://rims.institutims.rs/handle/123456789/396
AB  - Surface sediments collected from twelve stations in the Boka Kotorska Bay were analyzed for the level and distribution of twenty-six elements and ten oxides, grain sizes, organic matter, and carbonate content. Potentially toxic elements (Al, Fe, Mn, Cr, Zn, Ni, Cu, Pb, As, Co, U) were determined to assess the contamination status and potential environmental risk according to the single-element indices (enrichment factor (EF), geoaccumulation index (Igeo), contamination factor (CF)), and combined index (pollution load index (PLI)). The single-element indices EF and CF revealed that the surface marine sediment was moderately polluted with Pb, Cu, and Cr, while Igeo indicated moderate pollution with Ni > Cr > Zn > Cu > As and moderate to heavy pollution with Pb, as a result of the anthropogenic factors. The method of the combined effect of toxic elements, PLI, showed the highest pollution rate at the shipyard location in the Bay of Tivat. Pearson's correlation coefficient (r), principal component analysis (PCA), and cluster analysis (CA) were applied to highlight similarities and differences in the distribution of the investigated elements in the Bay, confirming the claim obtained by the pollution indices. The sediment contamination with most heavy metals, such as Cr, Zn, Ni, Cu, Pb, and As, has been identified in the Tivat Bay area.
PB  - Springer Heidelberg, Heidelberg
T2  - Environmental Science and Pollution Research
T1  - The characterization and pollution status of the surface sediment in the Boka Kotorska Bay, Montenegro
EP  - 53652
IS  - 38
SP  - 53629
VL  - 28
DO  - 10.1007/s11356-021-14382-8
ER  - 

@article{
author = "Radomirović, Milena and Mijatović, Nevenka and Vasić, Milica and Tanaskovski, Bojan and Mandić, Milica and Pezo, Lato and Onjia, Antonije",
year = "2021",
abstract = "Surface sediments collected from twelve stations in the Boka Kotorska Bay were analyzed for the level and distribution of twenty-six elements and ten oxides, grain sizes, organic matter, and carbonate content. Potentially toxic elements (Al, Fe, Mn, Cr, Zn, Ni, Cu, Pb, As, Co, U) were determined to assess the contamination status and potential environmental risk according to the single-element indices (enrichment factor (EF), geoaccumulation index (Igeo), contamination factor (CF)), and combined index (pollution load index (PLI)). The single-element indices EF and CF revealed that the surface marine sediment was moderately polluted with Pb, Cu, and Cr, while Igeo indicated moderate pollution with Ni > Cr > Zn > Cu > As and moderate to heavy pollution with Pb, as a result of the anthropogenic factors. The method of the combined effect of toxic elements, PLI, showed the highest pollution rate at the shipyard location in the Bay of Tivat. Pearson's correlation coefficient (r), principal component analysis (PCA), and cluster analysis (CA) were applied to highlight similarities and differences in the distribution of the investigated elements in the Bay, confirming the claim obtained by the pollution indices. The sediment contamination with most heavy metals, such as Cr, Zn, Ni, Cu, Pb, and As, has been identified in the Tivat Bay area.",
publisher = "Springer Heidelberg, Heidelberg",
journal = "Environmental Science and Pollution Research",
title = "The characterization and pollution status of the surface sediment in the Boka Kotorska Bay, Montenegro",
pages = "53652-53629",
number = "38",
volume = "28",
doi = "10.1007/s11356-021-14382-8"
}

Radomirović, M., Mijatović, N., Vasić, M., Tanaskovski, B., Mandić, M., Pezo, L.,& Onjia, A.. (2021). The characterization and pollution status of the surface sediment in the Boka Kotorska Bay, Montenegro. in Environmental Science and Pollution Research
Springer Heidelberg, Heidelberg., 28(38), 53629-53652.
https://doi.org/10.1007/s11356-021-14382-8

Radomirović M, Mijatović N, Vasić M, Tanaskovski B, Mandić M, Pezo L, Onjia A. The characterization and pollution status of the surface sediment in the Boka Kotorska Bay, Montenegro. in Environmental Science and Pollution Research. 2021;28(38):53629-53652.
doi:10.1007/s11356-021-14382-8 .

Radomirović, Milena, Mijatović, Nevenka, Vasić, Milica, Tanaskovski, Bojan, Mandić, Milica, Pezo, Lato, Onjia, Antonije, "The characterization and pollution status of the surface sediment in the Boka Kotorska Bay, Montenegro" in Environmental Science and Pollution Research, 28, no. 38 (2021):53629-53652,
https://doi.org/10.1007/s11356-021-14382-8 . .

TY  - JOUR
AU  - Arsić, Miodrag
AU  - Flajs, Željko
AU  - Sedmak, Aleksandar
AU  - Veg, Emil
AU  - Sedmak, Simon
PY  - 2021
UR  - http://rims.institutims.rs/handle/123456789/411
AB  - Research is conducted on the causes of damage and the structural integrity assessment of the bucket-wheel boom welded lattice structures, before and after the repair of vital structures. Additionally, the paper describes the investigation conducted based on the results of non-destructive tests (visual-, magnetic particle-, dye penetrant-, and ultrasonic tests), results of tensometric measurements that refer to the stress-strain state, and results based on numerical calculation of stresses by finite element method, performed through the use of a 3D model in the software Radimpex Tower 6.0 (R). The results of tests and research performed after the repair of damaged structural welded sections show that the operational procedures are being obeyed.
PB  - Institut za ispitivanje materijala, Beograd
T2  - Structural Integrity and Life
T1  - Structural integrity assessment of welded bucket-wheel boom
EP  - 206
IS  - 2
SP  - 201
VL  - 21
UR  - https://hdl.handle.net/21.15107/rcub_rims_411
ER  - 

@article{
author = "Arsić, Miodrag and Flajs, Željko and Sedmak, Aleksandar and Veg, Emil and Sedmak, Simon",
year = "2021",
abstract = "Research is conducted on the causes of damage and the structural integrity assessment of the bucket-wheel boom welded lattice structures, before and after the repair of vital structures. Additionally, the paper describes the investigation conducted based on the results of non-destructive tests (visual-, magnetic particle-, dye penetrant-, and ultrasonic tests), results of tensometric measurements that refer to the stress-strain state, and results based on numerical calculation of stresses by finite element method, performed through the use of a 3D model in the software Radimpex Tower 6.0 (R). The results of tests and research performed after the repair of damaged structural welded sections show that the operational procedures are being obeyed.",
publisher = "Institut za ispitivanje materijala, Beograd",
journal = "Structural Integrity and Life",
title = "Structural integrity assessment of welded bucket-wheel boom",
pages = "206-201",
number = "2",
volume = "21",
url = "https://hdl.handle.net/21.15107/rcub_rims_411"
}

Arsić, M., Flajs, Ž., Sedmak, A., Veg, E.,& Sedmak, S.. (2021). Structural integrity assessment of welded bucket-wheel boom. in Structural Integrity and Life
Institut za ispitivanje materijala, Beograd., 21(2), 201-206.
https://hdl.handle.net/21.15107/rcub_rims_411

Arsić M, Flajs Ž, Sedmak A, Veg E, Sedmak S. Structural integrity assessment of welded bucket-wheel boom. in Structural Integrity and Life. 2021;21(2):201-206.
https://hdl.handle.net/21.15107/rcub_rims_411 .

Arsić, Miodrag, Flajs, Željko, Sedmak, Aleksandar, Veg, Emil, Sedmak, Simon, "Structural integrity assessment of welded bucket-wheel boom" in Structural Integrity and Life, 21, no. 2 (2021):201-206,
https://hdl.handle.net/21.15107/rcub_rims_411 .

TY  - JOUR
AU  - Međo, Bojan
AU  - Arsić, Miodrag
AU  - Mladenović, Mladen
AU  - Savić, Zoran
AU  - Grabulov, Vencislav
AU  - Radosavljević, Zoran
AU  - Rakin, Marko
PY  - 2020
UR  - http://rims.institutims.rs/handle/123456789/381
AB  - Topic of this work is the integrity assessment of the pipeline section from hydropower plant Pirot. Crack-like defect size, maximum depth, is determined based on non-destructive evaluation - the largest crack depth is taken as the initial value for load carrying capacity estimation. Also, the crack dimensions (both length and depth) are varied. Limit pressure values are determined from 3D and 2D models of pipes with axial cracks on external surface. The influence of tensile loading on the load carrying capacity of the pipes with circumferential cracks is also examined. Integrity of pipes with both types of defects (axial and circumferential) is assessed through application of FAD diagrams.
PB  - Institut za ispitivanje materijala, Beograd
T2  - Structural Integrity and Life
T1  - Influence of defects on limit loads and integrity of the pipeline at hydropower plant 'Pirot'
EP  - 86
IS  - 1
SP  - 82
VL  - 20
UR  - https://hdl.handle.net/21.15107/rcub_technorep_4567
ER  - 

@article{
author = "Međo, Bojan and Arsić, Miodrag and Mladenović, Mladen and Savić, Zoran and Grabulov, Vencislav and Radosavljević, Zoran and Rakin, Marko",
year = "2020",
abstract = "Topic of this work is the integrity assessment of the pipeline section from hydropower plant Pirot. Crack-like defect size, maximum depth, is determined based on non-destructive evaluation - the largest crack depth is taken as the initial value for load carrying capacity estimation. Also, the crack dimensions (both length and depth) are varied. Limit pressure values are determined from 3D and 2D models of pipes with axial cracks on external surface. The influence of tensile loading on the load carrying capacity of the pipes with circumferential cracks is also examined. Integrity of pipes with both types of defects (axial and circumferential) is assessed through application of FAD diagrams.",
publisher = "Institut za ispitivanje materijala, Beograd",
journal = "Structural Integrity and Life",
title = "Influence of defects on limit loads and integrity of the pipeline at hydropower plant 'Pirot'",
pages = "86-82",
number = "1",
volume = "20",
url = "https://hdl.handle.net/21.15107/rcub_technorep_4567"
}

Međo, B., Arsić, M., Mladenović, M., Savić, Z., Grabulov, V., Radosavljević, Z.,& Rakin, M.. (2020). Influence of defects on limit loads and integrity of the pipeline at hydropower plant 'Pirot'. in Structural Integrity and Life
Institut za ispitivanje materijala, Beograd., 20(1), 82-86.
https://hdl.handle.net/21.15107/rcub_technorep_4567

Međo B, Arsić M, Mladenović M, Savić Z, Grabulov V, Radosavljević Z, Rakin M. Influence of defects on limit loads and integrity of the pipeline at hydropower plant 'Pirot'. in Structural Integrity and Life. 2020;20(1):82-86.
https://hdl.handle.net/21.15107/rcub_technorep_4567 .

Međo, Bojan, Arsić, Miodrag, Mladenović, Mladen, Savić, Zoran, Grabulov, Vencislav, Radosavljević, Zoran, Rakin, Marko, "Influence of defects on limit loads and integrity of the pipeline at hydropower plant 'Pirot'" in Structural Integrity and Life, 20, no. 1 (2020):82-86,
https://hdl.handle.net/21.15107/rcub_technorep_4567 .