TY  - JOUR
AU  - Prstić, Aurel
AU  - Aćimović-Pavlović, Zagorka
AU  - Terzić, Anja
AU  - Pavlović, Ljubica
AU  - Grujić, Snezana
PY  - 2014
UR  - http://rims.institutims.rs/handle/123456789/250
AB  - In this study, new refractory coatings based on synthesized cordierite for the casting applications were developed. The investigation included starting raw materials characterization, synthesis of the cordierite, design of the refractory coating as final product, and its application testing. The obtained results pointed out that coating suspension sediment stability was crucial quality parameter. Design and optimization of the coatings composition, with controlled rheological properties included, were achieved by application of different coating components, namely different suspension agents and by alteration of the coating production procedure. Cordierite, used as filler, was obtained by means of synthesis in the solid-state reaction on the basis of talc, kaolin, and alumina. The investigation showed that the application of these particular types of water/alcohol-based coatings has positive influence on surface quality and structural and mechanical properties of the castings of aluminum alloys obtained by casting into sand molds by means of evaporable models method, that is, evaporate pattern casting process.
PB  - Wiley, Hoboken
T2  - International Journal of Applied Ceramic Technology
T1  - Development of New Cordierite-Based Refractory Coatings for Casting Applications
EP  - 331
IS  - 2
SP  - 321
VL  - 11
DO  - 10.1111/ijac.12010
ER  - 

@article{
author = "Prstić, Aurel and Aćimović-Pavlović, Zagorka and Terzić, Anja and Pavlović, Ljubica and Grujić, Snezana",
year = "2014",
abstract = "In this study, new refractory coatings based on synthesized cordierite for the casting applications were developed. The investigation included starting raw materials characterization, synthesis of the cordierite, design of the refractory coating as final product, and its application testing. The obtained results pointed out that coating suspension sediment stability was crucial quality parameter. Design and optimization of the coatings composition, with controlled rheological properties included, were achieved by application of different coating components, namely different suspension agents and by alteration of the coating production procedure. Cordierite, used as filler, was obtained by means of synthesis in the solid-state reaction on the basis of talc, kaolin, and alumina. The investigation showed that the application of these particular types of water/alcohol-based coatings has positive influence on surface quality and structural and mechanical properties of the castings of aluminum alloys obtained by casting into sand molds by means of evaporable models method, that is, evaporate pattern casting process.",
publisher = "Wiley, Hoboken",
journal = "International Journal of Applied Ceramic Technology",
title = "Development of New Cordierite-Based Refractory Coatings for Casting Applications",
pages = "331-321",
number = "2",
volume = "11",
doi = "10.1111/ijac.12010"
}

Prstić, A., Aćimović-Pavlović, Z., Terzić, A., Pavlović, L.,& Grujić, S.. (2014). Development of New Cordierite-Based Refractory Coatings for Casting Applications. in International Journal of Applied Ceramic Technology
Wiley, Hoboken., 11(2), 321-331.
https://doi.org/10.1111/ijac.12010

Prstić A, Aćimović-Pavlović Z, Terzić A, Pavlović L, Grujić S. Development of New Cordierite-Based Refractory Coatings for Casting Applications. in International Journal of Applied Ceramic Technology. 2014;11(2):321-331.
doi:10.1111/ijac.12010 .

Prstić, Aurel, Aćimović-Pavlović, Zagorka, Terzić, Anja, Pavlović, Ljubica, Grujić, Snezana, "Development of New Cordierite-Based Refractory Coatings for Casting Applications" in International Journal of Applied Ceramic Technology, 11, no. 2 (2014):321-331,
https://doi.org/10.1111/ijac.12010 . .

TY  - JOUR
AU  - Tripković, S.
AU  - Aćimović-Pavlović, Zagorka
AU  - Terzić, Anja
AU  - Pavlović, Ljubica
AU  - Pavlović, Marko
PY  - 2013
UR  - http://rims.institutims.rs/handle/123456789/210
AB  - The results of the investigation of the influence of different modifiers (sodium, phosphorus, antimony and strontium) on the quality of AlSi12CuMgNi and AlSi18CuMgNi alloys, which are used for the production of pistons, are presented in this paper. The effects of these elements were investigated with reference to their mechanical and structural properties measured at ambient and elevated temperatures and service performance of the piston. Since strontium and antimony modified alloys are not considered as standardised piston alloys, the research results were compared with the results of standard phosphor and sodium modified alloys normally used at globally renowned piston manufacturer: Mahle, KS.
PB  - Maney Publishing, Leeds
T2  - International Journal of Cast Metals Research
T1  - Influence of modifying methods on quality of eutectic and hypereutectic silumine for diesel engine pistons
EP  - 212
IS  - 4
SP  - 209
VL  - 26
DO  - 10.1179/1743133613Y.0000000054
ER  - 

@article{
author = "Tripković, S. and Aćimović-Pavlović, Zagorka and Terzić, Anja and Pavlović, Ljubica and Pavlović, Marko",
year = "2013",
abstract = "The results of the investigation of the influence of different modifiers (sodium, phosphorus, antimony and strontium) on the quality of AlSi12CuMgNi and AlSi18CuMgNi alloys, which are used for the production of pistons, are presented in this paper. The effects of these elements were investigated with reference to their mechanical and structural properties measured at ambient and elevated temperatures and service performance of the piston. Since strontium and antimony modified alloys are not considered as standardised piston alloys, the research results were compared with the results of standard phosphor and sodium modified alloys normally used at globally renowned piston manufacturer: Mahle, KS.",
publisher = "Maney Publishing, Leeds",
journal = "International Journal of Cast Metals Research",
title = "Influence of modifying methods on quality of eutectic and hypereutectic silumine for diesel engine pistons",
pages = "212-209",
number = "4",
volume = "26",
doi = "10.1179/1743133613Y.0000000054"
}

Tripković, S., Aćimović-Pavlović, Z., Terzić, A., Pavlović, L.,& Pavlović, M.. (2013). Influence of modifying methods on quality of eutectic and hypereutectic silumine for diesel engine pistons. in International Journal of Cast Metals Research
Maney Publishing, Leeds., 26(4), 209-212.
https://doi.org/10.1179/1743133613Y.0000000054

Tripković S, Aćimović-Pavlović Z, Terzić A, Pavlović L, Pavlović M. Influence of modifying methods on quality of eutectic and hypereutectic silumine for diesel engine pistons. in International Journal of Cast Metals Research. 2013;26(4):209-212.
doi:10.1179/1743133613Y.0000000054 .

Tripković, S., Aćimović-Pavlović, Zagorka, Terzić, Anja, Pavlović, Ljubica, Pavlović, Marko, "Influence of modifying methods on quality of eutectic and hypereutectic silumine for diesel engine pistons" in International Journal of Cast Metals Research, 26, no. 4 (2013):209-212,
https://doi.org/10.1179/1743133613Y.0000000054 . .