TY  - JOUR
AU  - Dimić, Ivana
AU  - Arsić, Miodrag
AU  - Međo, Bojan
AU  - Stefanović, Ana
AU  - Grabulov, Vencislav
AU  - Rakin, Marko
PY  - 2013
UR  - http://rims.institutims.rs/handle/123456789/202
AB  - Since local defects reduce the load-carrying capacity and deformation ability of a piping system, an analysis is undertaken to quantify the influence of weld defects on integrity of the pipe elbows subjected to internal pressure. Incompletely filled groove is examined, because this type of defect was previously detected by ultrasonic measurement on the inner surface of the pipeline from a hydro-power plant. Three-dimensional finite element analysis is conducted using Abaqus software package. The influence of weld defect geometry (its depth, length and location) on the elbow integrity is determined. Additionally, decrease of load carrying capacity is determined for the case when a crack has initiated at the bottom of the defect. The influence of finite element type (hexahedral or tetrahedral) is examined.
PB  - Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek
T2  - Tehnički vjesnik
T1  - Effect of welded joint imperfection on the integrity of pipe elbows subjected to internal pressure
EP  - 290
IS  - 2
SP  - 285
VL  - 20
UR  - https://hdl.handle.net/21.15107/rcub_technorep_2515
ER  - 

@article{
author = "Dimić, Ivana and Arsić, Miodrag and Međo, Bojan and Stefanović, Ana and Grabulov, Vencislav and Rakin, Marko",
year = "2013",
abstract = "Since local defects reduce the load-carrying capacity and deformation ability of a piping system, an analysis is undertaken to quantify the influence of weld defects on integrity of the pipe elbows subjected to internal pressure. Incompletely filled groove is examined, because this type of defect was previously detected by ultrasonic measurement on the inner surface of the pipeline from a hydro-power plant. Three-dimensional finite element analysis is conducted using Abaqus software package. The influence of weld defect geometry (its depth, length and location) on the elbow integrity is determined. Additionally, decrease of load carrying capacity is determined for the case when a crack has initiated at the bottom of the defect. The influence of finite element type (hexahedral or tetrahedral) is examined.",
publisher = "Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek",
journal = "Tehnički vjesnik",
title = "Effect of welded joint imperfection on the integrity of pipe elbows subjected to internal pressure",
pages = "290-285",
number = "2",
volume = "20",
url = "https://hdl.handle.net/21.15107/rcub_technorep_2515"
}

Dimić, I., Arsić, M., Međo, B., Stefanović, A., Grabulov, V.,& Rakin, M.. (2013). Effect of welded joint imperfection on the integrity of pipe elbows subjected to internal pressure. in Tehnički vjesnik
Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek., 20(2), 285-290.
https://hdl.handle.net/21.15107/rcub_technorep_2515

Dimić I, Arsić M, Međo B, Stefanović A, Grabulov V, Rakin M. Effect of welded joint imperfection on the integrity of pipe elbows subjected to internal pressure. in Tehnički vjesnik. 2013;20(2):285-290.
https://hdl.handle.net/21.15107/rcub_technorep_2515 .

Dimić, Ivana, Arsić, Miodrag, Međo, Bojan, Stefanović, Ana, Grabulov, Vencislav, Rakin, Marko, "Effect of welded joint imperfection on the integrity of pipe elbows subjected to internal pressure" in Tehnički vjesnik, 20, no. 2 (2013):285-290,
https://hdl.handle.net/21.15107/rcub_technorep_2515 .