TY  - CONF
AU  - Zečević, Bojana
AU  - Maksimović, Ana
AU  - Milović, Ljubica
AU  - Aleksić, Vujadin
AU  - Grbović, Aleksandar
AU  - Bulatović, Srđan
PY  - 2022
UR  - http://rims.institutims.rs/handle/123456789/624
AB  - Steel grade 14MoV6 3 is used for manufacturing of boilers and steam pipelines designed for steam temperatures up to 560°C. This paper presents the numerical simulation of a CT-specimen, using the finite element method. The analysis was performed using Ansys Workbench R21, and represents the initial stage of extensive research involving the behaviour of 14MoV6 3 steel. The goal was to simulate the real experimental conditions, including boundary conditions and loads, which were defined in accordance with relevant standards, and to obtain representative results. The temperature dependent mechanical properties needed for the simulation of plastic behaviour of such specimens under tensile loads were obtained from the experimental data and the literature.
PB  - Elsevier B.V.
C3  - 23rd European Conference on Fracture, ECF 2022, Procedia Structural Integrity
T1  - Numerical simulation of 14Mov6-3 steel CT-specimen Fracture Behavior
VL  - 42
DO  - 10.1016/j.prostr.2022.12.189
ER  - 

@conference{
author = "Zečević, Bojana and Maksimović, Ana and Milović, Ljubica and Aleksić, Vujadin and Grbović, Aleksandar and Bulatović, Srđan",
year = "2022",
abstract = "Steel grade 14MoV6 3 is used for manufacturing of boilers and steam pipelines designed for steam temperatures up to 560°C. This paper presents the numerical simulation of a CT-specimen, using the finite element method. The analysis was performed using Ansys Workbench R21, and represents the initial stage of extensive research involving the behaviour of 14MoV6 3 steel. The goal was to simulate the real experimental conditions, including boundary conditions and loads, which were defined in accordance with relevant standards, and to obtain representative results. The temperature dependent mechanical properties needed for the simulation of plastic behaviour of such specimens under tensile loads were obtained from the experimental data and the literature.",
publisher = "Elsevier B.V.",
journal = "23rd European Conference on Fracture, ECF 2022, Procedia Structural Integrity",
title = "Numerical simulation of 14Mov6-3 steel CT-specimen Fracture Behavior",
volume = "42",
doi = "10.1016/j.prostr.2022.12.189"
}

Zečević, B., Maksimović, A., Milović, L., Aleksić, V., Grbović, A.,& Bulatović, S.. (2022). Numerical simulation of 14Mov6-3 steel CT-specimen Fracture Behavior. in 23rd European Conference on Fracture, ECF 2022, Procedia Structural Integrity
Elsevier B.V.., 42.
https://doi.org/10.1016/j.prostr.2022.12.189

Zečević B, Maksimović A, Milović L, Aleksić V, Grbović A, Bulatović S. Numerical simulation of 14Mov6-3 steel CT-specimen Fracture Behavior. in 23rd European Conference on Fracture, ECF 2022, Procedia Structural Integrity. 2022;42.
doi:10.1016/j.prostr.2022.12.189 .

Zečević, Bojana, Maksimović, Ana, Milović, Ljubica, Aleksić, Vujadin, Grbović, Aleksandar, Bulatović, Srđan, "Numerical simulation of 14Mov6-3 steel CT-specimen Fracture Behavior" in 23rd European Conference on Fracture, ECF 2022, Procedia Structural Integrity, 42 (2022),
https://doi.org/10.1016/j.prostr.2022.12.189 . .

TY  - JOUR
AU  - Radomirović, Milena
AU  - Mijatović, Nevenka
AU  - Vasić, Milica
AU  - Tanaskovski, Bojan
AU  - Mandić, Milica
AU  - Pezo, Lato
AU  - Onjia, Antonije
PY  - 2021
UR  - http://rims.institutims.rs/handle/123456789/396
AB  - Surface sediments collected from twelve stations in the Boka Kotorska Bay were analyzed for the level and distribution of twenty-six elements and ten oxides, grain sizes, organic matter, and carbonate content. Potentially toxic elements (Al, Fe, Mn, Cr, Zn, Ni, Cu, Pb, As, Co, U) were determined to assess the contamination status and potential environmental risk according to the single-element indices (enrichment factor (EF), geoaccumulation index (Igeo), contamination factor (CF)), and combined index (pollution load index (PLI)). The single-element indices EF and CF revealed that the surface marine sediment was moderately polluted with Pb, Cu, and Cr, while Igeo indicated moderate pollution with Ni > Cr > Zn > Cu > As and moderate to heavy pollution with Pb, as a result of the anthropogenic factors. The method of the combined effect of toxic elements, PLI, showed the highest pollution rate at the shipyard location in the Bay of Tivat. Pearson's correlation coefficient (r), principal component analysis (PCA), and cluster analysis (CA) were applied to highlight similarities and differences in the distribution of the investigated elements in the Bay, confirming the claim obtained by the pollution indices. The sediment contamination with most heavy metals, such as Cr, Zn, Ni, Cu, Pb, and As, has been identified in the Tivat Bay area.
PB  - Springer Heidelberg, Heidelberg
T2  - Environmental Science and Pollution Research
T1  - The characterization and pollution status of the surface sediment in the Boka Kotorska Bay, Montenegro
EP  - 53652
IS  - 38
SP  - 53629
VL  - 28
DO  - 10.1007/s11356-021-14382-8
ER  - 

@article{
author = "Radomirović, Milena and Mijatović, Nevenka and Vasić, Milica and Tanaskovski, Bojan and Mandić, Milica and Pezo, Lato and Onjia, Antonije",
year = "2021",
abstract = "Surface sediments collected from twelve stations in the Boka Kotorska Bay were analyzed for the level and distribution of twenty-six elements and ten oxides, grain sizes, organic matter, and carbonate content. Potentially toxic elements (Al, Fe, Mn, Cr, Zn, Ni, Cu, Pb, As, Co, U) were determined to assess the contamination status and potential environmental risk according to the single-element indices (enrichment factor (EF), geoaccumulation index (Igeo), contamination factor (CF)), and combined index (pollution load index (PLI)). The single-element indices EF and CF revealed that the surface marine sediment was moderately polluted with Pb, Cu, and Cr, while Igeo indicated moderate pollution with Ni > Cr > Zn > Cu > As and moderate to heavy pollution with Pb, as a result of the anthropogenic factors. The method of the combined effect of toxic elements, PLI, showed the highest pollution rate at the shipyard location in the Bay of Tivat. Pearson's correlation coefficient (r), principal component analysis (PCA), and cluster analysis (CA) were applied to highlight similarities and differences in the distribution of the investigated elements in the Bay, confirming the claim obtained by the pollution indices. The sediment contamination with most heavy metals, such as Cr, Zn, Ni, Cu, Pb, and As, has been identified in the Tivat Bay area.",
publisher = "Springer Heidelberg, Heidelberg",
journal = "Environmental Science and Pollution Research",
title = "The characterization and pollution status of the surface sediment in the Boka Kotorska Bay, Montenegro",
pages = "53652-53629",
number = "38",
volume = "28",
doi = "10.1007/s11356-021-14382-8"
}

Radomirović, M., Mijatović, N., Vasić, M., Tanaskovski, B., Mandić, M., Pezo, L.,& Onjia, A.. (2021). The characterization and pollution status of the surface sediment in the Boka Kotorska Bay, Montenegro. in Environmental Science and Pollution Research
Springer Heidelberg, Heidelberg., 28(38), 53629-53652.
https://doi.org/10.1007/s11356-021-14382-8

Radomirović M, Mijatović N, Vasić M, Tanaskovski B, Mandić M, Pezo L, Onjia A. The characterization and pollution status of the surface sediment in the Boka Kotorska Bay, Montenegro. in Environmental Science and Pollution Research. 2021;28(38):53629-53652.
doi:10.1007/s11356-021-14382-8 .

Radomirović, Milena, Mijatović, Nevenka, Vasić, Milica, Tanaskovski, Bojan, Mandić, Milica, Pezo, Lato, Onjia, Antonije, "The characterization and pollution status of the surface sediment in the Boka Kotorska Bay, Montenegro" in Environmental Science and Pollution Research, 28, no. 38 (2021):53629-53652,
https://doi.org/10.1007/s11356-021-14382-8 . .

TY  - JOUR
AU  - Arsić, Miodrag
AU  - Flajs, Željko
AU  - Sedmak, Aleksandar
AU  - Veg, Emil
AU  - Sedmak, Simon
PY  - 2021
UR  - http://rims.institutims.rs/handle/123456789/411
AB  - Research is conducted on the causes of damage and the structural integrity assessment of the bucket-wheel boom welded lattice structures, before and after the repair of vital structures. Additionally, the paper describes the investigation conducted based on the results of non-destructive tests (visual-, magnetic particle-, dye penetrant-, and ultrasonic tests), results of tensometric measurements that refer to the stress-strain state, and results based on numerical calculation of stresses by finite element method, performed through the use of a 3D model in the software Radimpex Tower 6.0 (R). The results of tests and research performed after the repair of damaged structural welded sections show that the operational procedures are being obeyed.
PB  - Institut za ispitivanje materijala, Beograd
T2  - Structural Integrity and Life
T1  - Structural integrity assessment of welded bucket-wheel boom
EP  - 206
IS  - 2
SP  - 201
VL  - 21
UR  - https://hdl.handle.net/21.15107/rcub_rims_411
ER  - 

@article{
author = "Arsić, Miodrag and Flajs, Željko and Sedmak, Aleksandar and Veg, Emil and Sedmak, Simon",
year = "2021",
abstract = "Research is conducted on the causes of damage and the structural integrity assessment of the bucket-wheel boom welded lattice structures, before and after the repair of vital structures. Additionally, the paper describes the investigation conducted based on the results of non-destructive tests (visual-, magnetic particle-, dye penetrant-, and ultrasonic tests), results of tensometric measurements that refer to the stress-strain state, and results based on numerical calculation of stresses by finite element method, performed through the use of a 3D model in the software Radimpex Tower 6.0 (R). The results of tests and research performed after the repair of damaged structural welded sections show that the operational procedures are being obeyed.",
publisher = "Institut za ispitivanje materijala, Beograd",
journal = "Structural Integrity and Life",
title = "Structural integrity assessment of welded bucket-wheel boom",
pages = "206-201",
number = "2",
volume = "21",
url = "https://hdl.handle.net/21.15107/rcub_rims_411"
}

Arsić, M., Flajs, Ž., Sedmak, A., Veg, E.,& Sedmak, S.. (2021). Structural integrity assessment of welded bucket-wheel boom. in Structural Integrity and Life
Institut za ispitivanje materijala, Beograd., 21(2), 201-206.
https://hdl.handle.net/21.15107/rcub_rims_411

Arsić M, Flajs Ž, Sedmak A, Veg E, Sedmak S. Structural integrity assessment of welded bucket-wheel boom. in Structural Integrity and Life. 2021;21(2):201-206.
https://hdl.handle.net/21.15107/rcub_rims_411 .

Arsić, Miodrag, Flajs, Željko, Sedmak, Aleksandar, Veg, Emil, Sedmak, Simon, "Structural integrity assessment of welded bucket-wheel boom" in Structural Integrity and Life, 21, no. 2 (2021):201-206,
https://hdl.handle.net/21.15107/rcub_rims_411 .

TY  - JOUR
AU  - Međo, Bojan
AU  - Arsić, Miodrag
AU  - Mladenović, Mladen
AU  - Savić, Zoran
AU  - Grabulov, Vencislav
AU  - Radosavljević, Zoran
AU  - Rakin, Marko
PY  - 2020
UR  - http://rims.institutims.rs/handle/123456789/381
AB  - Topic of this work is the integrity assessment of the pipeline section from hydropower plant Pirot. Crack-like defect size, maximum depth, is determined based on non-destructive evaluation - the largest crack depth is taken as the initial value for load carrying capacity estimation. Also, the crack dimensions (both length and depth) are varied. Limit pressure values are determined from 3D and 2D models of pipes with axial cracks on external surface. The influence of tensile loading on the load carrying capacity of the pipes with circumferential cracks is also examined. Integrity of pipes with both types of defects (axial and circumferential) is assessed through application of FAD diagrams.
PB  - Institut za ispitivanje materijala, Beograd
T2  - Structural Integrity and Life
T1  - Influence of defects on limit loads and integrity of the pipeline at hydropower plant 'Pirot'
EP  - 86
IS  - 1
SP  - 82
VL  - 20
UR  - https://hdl.handle.net/21.15107/rcub_technorep_4567
ER  - 

@article{
author = "Međo, Bojan and Arsić, Miodrag and Mladenović, Mladen and Savić, Zoran and Grabulov, Vencislav and Radosavljević, Zoran and Rakin, Marko",
year = "2020",
abstract = "Topic of this work is the integrity assessment of the pipeline section from hydropower plant Pirot. Crack-like defect size, maximum depth, is determined based on non-destructive evaluation - the largest crack depth is taken as the initial value for load carrying capacity estimation. Also, the crack dimensions (both length and depth) are varied. Limit pressure values are determined from 3D and 2D models of pipes with axial cracks on external surface. The influence of tensile loading on the load carrying capacity of the pipes with circumferential cracks is also examined. Integrity of pipes with both types of defects (axial and circumferential) is assessed through application of FAD diagrams.",
publisher = "Institut za ispitivanje materijala, Beograd",
journal = "Structural Integrity and Life",
title = "Influence of defects on limit loads and integrity of the pipeline at hydropower plant 'Pirot'",
pages = "86-82",
number = "1",
volume = "20",
url = "https://hdl.handle.net/21.15107/rcub_technorep_4567"
}

Međo, B., Arsić, M., Mladenović, M., Savić, Z., Grabulov, V., Radosavljević, Z.,& Rakin, M.. (2020). Influence of defects on limit loads and integrity of the pipeline at hydropower plant 'Pirot'. in Structural Integrity and Life
Institut za ispitivanje materijala, Beograd., 20(1), 82-86.
https://hdl.handle.net/21.15107/rcub_technorep_4567

Međo B, Arsić M, Mladenović M, Savić Z, Grabulov V, Radosavljević Z, Rakin M. Influence of defects on limit loads and integrity of the pipeline at hydropower plant 'Pirot'. in Structural Integrity and Life. 2020;20(1):82-86.
https://hdl.handle.net/21.15107/rcub_technorep_4567 .

Međo, Bojan, Arsić, Miodrag, Mladenović, Mladen, Savić, Zoran, Grabulov, Vencislav, Radosavljević, Zoran, Rakin, Marko, "Influence of defects on limit loads and integrity of the pipeline at hydropower plant 'Pirot'" in Structural Integrity and Life, 20, no. 1 (2020):82-86,
https://hdl.handle.net/21.15107/rcub_technorep_4567 .