TY  - CONF
AU  - Maksimović, Ana
AU  - Zečević, Bojana
AU  - Milović, Ljubica
AU  - Aleksić, Vujadin
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/677
AB  - The first industrial application of elevated and high-strength steel in the form of hot-rolled strips and sheets
was the manufacture of pipes and vessels under pressure, as it was possible to reduce the thickness, i.e. to
reduce the weightof welded structures. The high-strength low-alloy steels used today are usually obtained by
suitable chemical composition and thermomechanical treatment.
Our investigated steel NIOMOL 490 K belongs to the class of molybdenum microalloyed steels, where the
microalloying with molybdenum serves to increase the heat resistance of the steel and at the same time
strengthen the influence of other alloying elements. This steel grade is designed for the manufacture of welded
pressure vessels fabrication and is mainly used for dynamic loading conditions at low operating temperatures.
In the present paper, the tensile and hardness tests were used to determine the effects of alloying elements
on the mechanical properties of NIOMOL 490K steel in the temperature range from -60°C to +60°C.
PB  - University of Belgrade - Faculty of Mechanical Engineering
C3  - International Conference of Experimental and Numerical Investigations and New Technologies, CNN Tech, The Book of Abstracts
T1  - Effects of Alloying Elements on the Properties of HSLA Steel
SP  - 23
UR  - https://hdl.handle.net/21.15107/rcub_rims_677
ER  - 

@conference{
author = "Maksimović, Ana and Zečević, Bojana and Milović, Ljubica and Aleksić, Vujadin",
year = "2023",
abstract = "The first industrial application of elevated and high-strength steel in the form of hot-rolled strips and sheets
was the manufacture of pipes and vessels under pressure, as it was possible to reduce the thickness, i.e. to
reduce the weightof welded structures. The high-strength low-alloy steels used today are usually obtained by
suitable chemical composition and thermomechanical treatment.
Our investigated steel NIOMOL 490 K belongs to the class of molybdenum microalloyed steels, where the
microalloying with molybdenum serves to increase the heat resistance of the steel and at the same time
strengthen the influence of other alloying elements. This steel grade is designed for the manufacture of welded
pressure vessels fabrication and is mainly used for dynamic loading conditions at low operating temperatures.
In the present paper, the tensile and hardness tests were used to determine the effects of alloying elements
on the mechanical properties of NIOMOL 490K steel in the temperature range from -60°C to +60°C.",
publisher = "University of Belgrade - Faculty of Mechanical Engineering",
journal = "International Conference of Experimental and Numerical Investigations and New Technologies, CNN Tech, The Book of Abstracts",
title = "Effects of Alloying Elements on the Properties of HSLA Steel",
pages = "23",
url = "https://hdl.handle.net/21.15107/rcub_rims_677"
}

Maksimović, A., Zečević, B., Milović, L.,& Aleksić, V.. (2023). Effects of Alloying Elements on the Properties of HSLA Steel. in International Conference of Experimental and Numerical Investigations and New Technologies, CNN Tech, The Book of Abstracts
University of Belgrade - Faculty of Mechanical Engineering., 23.
https://hdl.handle.net/21.15107/rcub_rims_677

Maksimović A, Zečević B, Milović L, Aleksić V. Effects of Alloying Elements on the Properties of HSLA Steel. in International Conference of Experimental and Numerical Investigations and New Technologies, CNN Tech, The Book of Abstracts. 2023;:23.
https://hdl.handle.net/21.15107/rcub_rims_677 .

Maksimović, Ana, Zečević, Bojana, Milović, Ljubica, Aleksić, Vujadin, "Effects of Alloying Elements on the Properties of HSLA Steel" in International Conference of Experimental and Numerical Investigations and New Technologies, CNN Tech, The Book of Abstracts (2023):23,
https://hdl.handle.net/21.15107/rcub_rims_677 .

TY  - CONF
AU  - Aleksić, Vujadin
AU  - Zečević, Bojana
AU  - Bulatović, Srđan
AU  - Maksimović, Ana
AU  - Milović, Ljubica
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/681
AB  - Pipelines, with specifics in design, construction, testing and safety requirements must be designed
based on all relevant influences to ensure that they are safe during their working life. Allowable
stresses must be limited by possible errors in working conditions, in order to completely eliminate
the uncertainty arising from the production, the calculation model, the actual working conditions and
the characteristics and behavior of the material. In the paper, on the example of modeling and
calculation of the corrosion-damaged structure of the ammonia (NH3) transfer pipeline, a
methodological approach to the calculation using the Finite Element Method (FEM), is shown, in
accordance with the methods defined by the new and general approach to standardization and
technical harmonization for pressure equipment (Pressure Equipment Directive - PED 97/23 EC).
The paper uses advanced modeling techniques of corroded surfaces, based on FEM, with the aim of
developing a procedure for assessing the residual strength of steel pipelines operating in the
environmental conditions of the chemical products industry. The presentation of possible damages
and consequences caused by the corrosion of steel pipelines in the chemical products industry is also
given, and the possibility of taking measures to prevent such occurrences is discussed.
PB  - SERBIAN SOCIETY OF CORROSION AND MATERIALS PROTECTION (UISKOZAM)
C3  - XXIV YuCorr, Divčibare, Serbia-Proceedings
T1  - The Finite Element Method in the function of corrosion damage assessment of pipelines
EP  - 225
SP  - 216
UR  - https://hdl.handle.net/21.15107/rcub_rims_681
ER  - 

@conference{
author = "Aleksić, Vujadin and Zečević, Bojana and Bulatović, Srđan and Maksimović, Ana and Milović, Ljubica",
year = "2023",
abstract = "Pipelines, with specifics in design, construction, testing and safety requirements must be designed
based on all relevant influences to ensure that they are safe during their working life. Allowable
stresses must be limited by possible errors in working conditions, in order to completely eliminate
the uncertainty arising from the production, the calculation model, the actual working conditions and
the characteristics and behavior of the material. In the paper, on the example of modeling and
calculation of the corrosion-damaged structure of the ammonia (NH3) transfer pipeline, a
methodological approach to the calculation using the Finite Element Method (FEM), is shown, in
accordance with the methods defined by the new and general approach to standardization and
technical harmonization for pressure equipment (Pressure Equipment Directive - PED 97/23 EC).
The paper uses advanced modeling techniques of corroded surfaces, based on FEM, with the aim of
developing a procedure for assessing the residual strength of steel pipelines operating in the
environmental conditions of the chemical products industry. The presentation of possible damages
and consequences caused by the corrosion of steel pipelines in the chemical products industry is also
given, and the possibility of taking measures to prevent such occurrences is discussed.",
publisher = "SERBIAN SOCIETY OF CORROSION AND MATERIALS PROTECTION (UISKOZAM)",
journal = "XXIV YuCorr, Divčibare, Serbia-Proceedings",
title = "The Finite Element Method in the function of corrosion damage assessment of pipelines",
pages = "225-216",
url = "https://hdl.handle.net/21.15107/rcub_rims_681"
}

Aleksić, V., Zečević, B., Bulatović, S., Maksimović, A.,& Milović, L.. (2023). The Finite Element Method in the function of corrosion damage assessment of pipelines. in XXIV YuCorr, Divčibare, Serbia-Proceedings
SERBIAN SOCIETY OF CORROSION AND MATERIALS PROTECTION (UISKOZAM)., 216-225.
https://hdl.handle.net/21.15107/rcub_rims_681

Aleksić V, Zečević B, Bulatović S, Maksimović A, Milović L. The Finite Element Method in the function of corrosion damage assessment of pipelines. in XXIV YuCorr, Divčibare, Serbia-Proceedings. 2023;:216-225.
https://hdl.handle.net/21.15107/rcub_rims_681 .

Aleksić, Vujadin, Zečević, Bojana, Bulatović, Srđan, Maksimović, Ana, Milović, Ljubica, "The Finite Element Method in the function of corrosion damage assessment of pipelines" in XXIV YuCorr, Divčibare, Serbia-Proceedings (2023):216-225,
https://hdl.handle.net/21.15107/rcub_rims_681 .

TY  - CONF
AU  - Bulatović, Srđan
AU  - Aleksić, Vujadin
AU  - Zečević, Bojana
AU  - Ristić, Ognjen
AU  - Maksimović, Ana
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/680
AB  - This paper describes the procedures for preventing corrosion of welded joints. Also, a theoretical
overview of the forms of corrosion that are most prevalent in welded joints is presented.
The concept of corrosion in welded joints is very pronounced in real conditions. Welded joints are
inseparable joints that form an integral part of steel welded constructions. The internal energy
increases during the fusion welding especially in the heat affected places around the welded joint,
which become initiating spot of corrosion degradation. That is why it is of vital importance to focus
on ways to increase the resistance of welded structures to the impact of corrosion.
PB  - SERBIAN SOCIETY OF CORROSION AND MATERIALS PROTECTION (UISKOZAM)
C3  - XXIV YuCorr, Divčibare, Serbia-Proceedings
T1  - Procedures for preventing corrosion of welded joints
EP  - 215
SP  - 210
UR  - https://hdl.handle.net/21.15107/rcub_rims_680
ER  - 

@conference{
author = "Bulatović, Srđan and Aleksić, Vujadin and Zečević, Bojana and Ristić, Ognjen and Maksimović, Ana",
year = "2023",
abstract = "This paper describes the procedures for preventing corrosion of welded joints. Also, a theoretical
overview of the forms of corrosion that are most prevalent in welded joints is presented.
The concept of corrosion in welded joints is very pronounced in real conditions. Welded joints are
inseparable joints that form an integral part of steel welded constructions. The internal energy
increases during the fusion welding especially in the heat affected places around the welded joint,
which become initiating spot of corrosion degradation. That is why it is of vital importance to focus
on ways to increase the resistance of welded structures to the impact of corrosion.",
publisher = "SERBIAN SOCIETY OF CORROSION AND MATERIALS PROTECTION (UISKOZAM)",
journal = "XXIV YuCorr, Divčibare, Serbia-Proceedings",
title = "Procedures for preventing corrosion of welded joints",
pages = "215-210",
url = "https://hdl.handle.net/21.15107/rcub_rims_680"
}

Bulatović, S., Aleksić, V., Zečević, B., Ristić, O.,& Maksimović, A.. (2023). Procedures for preventing corrosion of welded joints. in XXIV YuCorr, Divčibare, Serbia-Proceedings
SERBIAN SOCIETY OF CORROSION AND MATERIALS PROTECTION (UISKOZAM)., 210-215.
https://hdl.handle.net/21.15107/rcub_rims_680

Bulatović S, Aleksić V, Zečević B, Ristić O, Maksimović A. Procedures for preventing corrosion of welded joints. in XXIV YuCorr, Divčibare, Serbia-Proceedings. 2023;:210-215.
https://hdl.handle.net/21.15107/rcub_rims_680 .

Bulatović, Srđan, Aleksić, Vujadin, Zečević, Bojana, Ristić, Ognjen, Maksimović, Ana, "Procedures for preventing corrosion of welded joints" in XXIV YuCorr, Divčibare, Serbia-Proceedings (2023):210-215,
https://hdl.handle.net/21.15107/rcub_rims_680 .

TY  - JOUR
AU  - Bulatović, Srđan
AU  - Aleksić, Vujadin
AU  - Zečević, Bojana
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/682
AB  - Hydroelectric generating units at hydro power plants consist of turbine and hydromechanical equipment, which components could be subject to a large number of European Directives. Responsibility of turbine manufacturer is to make sure that certain components of equipment are in agreement with requirements of the specific Directive. This paper offers the opportunity to perceive the possibility of applying the Pressure Equipment Directive 97/23/EC, Simple Pressure Vessels Directive 2009/105/EC, Machinery Directive 98/37/EEC and Low Voltage Directive 2006/95/EC for turbine equipment at hydro power plants ‘Djerdap 1’ and ‘Djerdap 2’, because components of the turbine regulator and of the lubrication system, of the runner and measurement and regulation system are individually subject to different Directives. The overview of the possible approach regarding the standardization and technical harmonization of turbine equipment components for easier assessment of their integrity is also presented in this paper.
T2  - International Journal of Manufacturing Economics and Management
T1  - European Directives Through the Integrity Evaluation of the Mechanical Equipment
IS  - 1
VL  - 3
DO  - 10.54684/ijmem.2023.3.1.17
ER  - 

@article{
author = "Bulatović, Srđan and Aleksić, Vujadin and Zečević, Bojana",
year = "2023",
abstract = "Hydroelectric generating units at hydro power plants consist of turbine and hydromechanical equipment, which components could be subject to a large number of European Directives. Responsibility of turbine manufacturer is to make sure that certain components of equipment are in agreement with requirements of the specific Directive. This paper offers the opportunity to perceive the possibility of applying the Pressure Equipment Directive 97/23/EC, Simple Pressure Vessels Directive 2009/105/EC, Machinery Directive 98/37/EEC and Low Voltage Directive 2006/95/EC for turbine equipment at hydro power plants ‘Djerdap 1’ and ‘Djerdap 2’, because components of the turbine regulator and of the lubrication system, of the runner and measurement and regulation system are individually subject to different Directives. The overview of the possible approach regarding the standardization and technical harmonization of turbine equipment components for easier assessment of their integrity is also presented in this paper.",
journal = "International Journal of Manufacturing Economics and Management",
title = "European Directives Through the Integrity Evaluation of the Mechanical Equipment",
number = "1",
volume = "3",
doi = "10.54684/ijmem.2023.3.1.17"
}

Bulatović, S., Aleksić, V.,& Zečević, B.. (2023). European Directives Through the Integrity Evaluation of the Mechanical Equipment. in International Journal of Manufacturing Economics and Management, 3(1).
https://doi.org/10.54684/ijmem.2023.3.1.17

Bulatović S, Aleksić V, Zečević B. European Directives Through the Integrity Evaluation of the Mechanical Equipment. in International Journal of Manufacturing Economics and Management. 2023;3(1).
doi:10.54684/ijmem.2023.3.1.17 .

Bulatović, Srđan, Aleksić, Vujadin, Zečević, Bojana, "European Directives Through the Integrity Evaluation of the Mechanical Equipment" in International Journal of Manufacturing Economics and Management, 3, no. 1 (2023),
https://doi.org/10.54684/ijmem.2023.3.1.17 . .

TY  - CONF
AU  - Bulatović, Srđan
AU  - Aleksić, Vujadin
AU  - Zečević, Bojana
AU  - Prochaska, Biljana
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/679
AB  - After several decades of constant exploitation of the horizontal bulb turbine, which is an integral
part of the hydroelectric power unit, empirically, the formation of a crack occurs in the turbine shaft
due to the influence of corrosion, erosion and cavitation.
Through experimental tests and calculations it has been determined that values of bending stresses
of the turbine, which occur due to the action of fatigue and corrosion, as well as stress concentration,
are bigger than 25 MPa for flanges exposed to water, and in other case bigger than 40 MPa for
flanges exposed to `corrosive water` and can cause the occurrence of surface cracks on the transition
radius between the cylindrical part of the shaft and the flange. It has been determined that stress
values in the zone under the influence of bending stresses were bigger than allowable values, which
led to the occurrence of many cracks due to fatigue corrosion. One of those cracks caused the failure
of the shaft and of the whole turbine.
C3  - 16th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI
T1  - Occurrence of cracks due to inadequate turbine shaft construction
EP  - 192
SP  - 187
UR  - https://hdl.handle.net/21.15107/rcub_rims_679
ER  - 

@conference{
author = "Bulatović, Srđan and Aleksić, Vujadin and Zečević, Bojana and Prochaska, Biljana",
year = "2023",
abstract = "After several decades of constant exploitation of the horizontal bulb turbine, which is an integral
part of the hydroelectric power unit, empirically, the formation of a crack occurs in the turbine shaft
due to the influence of corrosion, erosion and cavitation.
Through experimental tests and calculations it has been determined that values of bending stresses
of the turbine, which occur due to the action of fatigue and corrosion, as well as stress concentration,
are bigger than 25 MPa for flanges exposed to water, and in other case bigger than 40 MPa for
flanges exposed to `corrosive water` and can cause the occurrence of surface cracks on the transition
radius between the cylindrical part of the shaft and the flange. It has been determined that stress
values in the zone under the influence of bending stresses were bigger than allowable values, which
led to the occurrence of many cracks due to fatigue corrosion. One of those cracks caused the failure
of the shaft and of the whole turbine.",
journal = "16th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI",
title = "Occurrence of cracks due to inadequate turbine shaft construction",
pages = "192-187",
url = "https://hdl.handle.net/21.15107/rcub_rims_679"
}

Bulatović, S., Aleksić, V., Zečević, B.,& Prochaska, B.. (2023). Occurrence of cracks due to inadequate turbine shaft construction. in 16th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI, 187-192.
https://hdl.handle.net/21.15107/rcub_rims_679

Bulatović S, Aleksić V, Zečević B, Prochaska B. Occurrence of cracks due to inadequate turbine shaft construction. in 16th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI. 2023;:187-192.
https://hdl.handle.net/21.15107/rcub_rims_679 .

Bulatović, Srđan, Aleksić, Vujadin, Zečević, Bojana, Prochaska, Biljana, "Occurrence of cracks due to inadequate turbine shaft construction" in 16th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI (2023):187-192,
https://hdl.handle.net/21.15107/rcub_rims_679 .

TY  - CONF
AU  - Aleksić, Vujadin
AU  - Bulatović, Srđan
AU  - Zečević, Bojana
AU  - Maksimović, Ana
AU  - Milović, Ljubica
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/678
AB  - In the paper, based on the results of experimental research on the behavior of samples in the form of
round smooth test specimens (STS) made of high strength low alloy steel (HSLA), Nionikral 70 (NN
70), under conditions of low cycle fatigue (LCF), a computational stress analysis was performed
using numerical methods.
Experimental investigations of the behavior of the samples were performed with controlled and fully
reversible deformation ( /2 = const, R = min/ max = 1), according to the ISO 12106:2003 (E)
standard.
For computational analyses, the method of least squares (in the Excel program) and the finite
element method (FEM) (in the SolidWorks program) were used. The behavior of HSLA steel during
low cycle fatigue (LCF) simulation was analyzed in the Cosmos module of the SolidWorks program.
On the basis of the analysis of the results of the stress deformation state and the determination of the
life span through the isolines of the life span and comparison with the results of experimental tests, a
graphic representation is given. Specific load cycles involving the entire round smooth test specimen
ligament for a specific load in a wide range of LCF loads were analyzed.
The analyzes showed the justification of the effort to solve the life assessment of steel subjected to
low cycle fatigue (LCF) numerically. The results of experimental tests and simulation tests also gave
us important data on understanding the LCF behavior of HSLA steel NN 70.
C3  - 16th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI
T1  - Life assessment using the finite element method of high-strength low-alloy steel samples exposed to low-cycle fatigue
EP  - 499
SP  - 490
UR  - https://hdl.handle.net/21.15107/rcub_rims_678
ER  - 

@conference{
author = "Aleksić, Vujadin and Bulatović, Srđan and Zečević, Bojana and Maksimović, Ana and Milović, Ljubica",
year = "2023",
abstract = "In the paper, based on the results of experimental research on the behavior of samples in the form of
round smooth test specimens (STS) made of high strength low alloy steel (HSLA), Nionikral 70 (NN
70), under conditions of low cycle fatigue (LCF), a computational stress analysis was performed
using numerical methods.
Experimental investigations of the behavior of the samples were performed with controlled and fully
reversible deformation ( /2 = const, R = min/ max = 1), according to the ISO 12106:2003 (E)
standard.
For computational analyses, the method of least squares (in the Excel program) and the finite
element method (FEM) (in the SolidWorks program) were used. The behavior of HSLA steel during
low cycle fatigue (LCF) simulation was analyzed in the Cosmos module of the SolidWorks program.
On the basis of the analysis of the results of the stress deformation state and the determination of the
life span through the isolines of the life span and comparison with the results of experimental tests, a
graphic representation is given. Specific load cycles involving the entire round smooth test specimen
ligament for a specific load in a wide range of LCF loads were analyzed.
The analyzes showed the justification of the effort to solve the life assessment of steel subjected to
low cycle fatigue (LCF) numerically. The results of experimental tests and simulation tests also gave
us important data on understanding the LCF behavior of HSLA steel NN 70.",
journal = "16th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI",
title = "Life assessment using the finite element method of high-strength low-alloy steel samples exposed to low-cycle fatigue",
pages = "499-490",
url = "https://hdl.handle.net/21.15107/rcub_rims_678"
}

Aleksić, V., Bulatović, S., Zečević, B., Maksimović, A.,& Milović, L.. (2023). Life assessment using the finite element method of high-strength low-alloy steel samples exposed to low-cycle fatigue. in 16th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI, 490-499.
https://hdl.handle.net/21.15107/rcub_rims_678

Aleksić V, Bulatović S, Zečević B, Maksimović A, Milović L. Life assessment using the finite element method of high-strength low-alloy steel samples exposed to low-cycle fatigue. in 16th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI. 2023;:490-499.
https://hdl.handle.net/21.15107/rcub_rims_678 .

Aleksić, Vujadin, Bulatović, Srđan, Zečević, Bojana, Maksimović, Ana, Milović, Ljubica, "Life assessment using the finite element method of high-strength low-alloy steel samples exposed to low-cycle fatigue" in 16th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI (2023):490-499,
https://hdl.handle.net/21.15107/rcub_rims_678 .

TY  - CHAP
AU  - Aškrabić, Marina
AU  - Zakić, Dimitrije
AU  - Savić, Aleksandar
AU  - Miličić, Ljiljana
AU  - Delić-Nikolić, Ivana
AU  - Vyšvařil, Martin
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/685
AB  - Although, the salt crystallization is one of the most common causes of the deterioration of lime-based mortars, testing of their resistance to the soluble salt action has not yet been standardized. The problems following the development of the globally accepted testing method are, among others: defining the type of mortar samples, ways of samples’ contamination, the type and the concentration of the salt solutions used, environmental conditions during testing, determination of the damage development and the durability assessment. Another task of the testing method is to explain and connect the processes developing in the materials when they are applied in laboratory and real conditions. In this paper, soluble salt resistance testing of lime mortars on the composite samples is presented. The main focus of the paper is on the determination of the salt distribution in this type of samples after the five wetting and drying cycles. Samples consisted of two lime rendering layers (inner – 1/3 and outer – 1/1), both prepared according to the experiences found in the literature for these types of lime mortars when applied on historical structures, placed on the natural stone bases. They were cured in laboratory conditions for 90 days, before drying and exposing to soluble salts action. Two types of 10% salt solutions were used for the test: sodium-chloride and sodium-sulfate. Salt contamination was performed by capillary action only in the first cycle, while in the other cycles samples were wetted by deionized water. After the finalization of the cycles, the detached pieces of mortar and efflorescence were removed from the samples. One of the samples from both groups were then cut in two halves, from which one was used for X-Ray Fluorescence (XRF) and another for Scanning Electron Microscopy with Energy Dispersive X-Ray Analysis (SEM – EDX) characterization. For the XRF analysis samples were divided into four layers, and then crushed and sieved through 0.5 mm sieve before testing. For the SEM-EDX analysis the polished thick cross sections were prepared. The paper presents the results of these two analyses, and discusses the advantages and disadvantages of their application for this purpose. Mineralogical analysis of the samples was performed using XRD analysis. It was shown that XRF analysis provides more precise quantification of the elements within one sample, while SEM-EDX analysis gives possibilities for testing of layers with smaller depth within one cross – section.
PB  - Springer
T2  - Conservation and Restoration of Historic Mortars and Masonry Structures
T1  - Determination of the Salt Distribution in the Lime-Based Mortar Samples Using XRF and SEM-EDX Characterization
DO  - 10.1007/978-3-031-31472-8_43
ER  - 

@inbook{
author = "Aškrabić, Marina and Zakić, Dimitrije and Savić, Aleksandar and Miličić, Ljiljana and Delić-Nikolić, Ivana and Vyšvařil, Martin",
year = "2023",
abstract = "Although, the salt crystallization is one of the most common causes of the deterioration of lime-based mortars, testing of their resistance to the soluble salt action has not yet been standardized. The problems following the development of the globally accepted testing method are, among others: defining the type of mortar samples, ways of samples’ contamination, the type and the concentration of the salt solutions used, environmental conditions during testing, determination of the damage development and the durability assessment. Another task of the testing method is to explain and connect the processes developing in the materials when they are applied in laboratory and real conditions. In this paper, soluble salt resistance testing of lime mortars on the composite samples is presented. The main focus of the paper is on the determination of the salt distribution in this type of samples after the five wetting and drying cycles. Samples consisted of two lime rendering layers (inner – 1/3 and outer – 1/1), both prepared according to the experiences found in the literature for these types of lime mortars when applied on historical structures, placed on the natural stone bases. They were cured in laboratory conditions for 90 days, before drying and exposing to soluble salts action. Two types of 10% salt solutions were used for the test: sodium-chloride and sodium-sulfate. Salt contamination was performed by capillary action only in the first cycle, while in the other cycles samples were wetted by deionized water. After the finalization of the cycles, the detached pieces of mortar and efflorescence were removed from the samples. One of the samples from both groups were then cut in two halves, from which one was used for X-Ray Fluorescence (XRF) and another for Scanning Electron Microscopy with Energy Dispersive X-Ray Analysis (SEM – EDX) characterization. For the XRF analysis samples were divided into four layers, and then crushed and sieved through 0.5 mm sieve before testing. For the SEM-EDX analysis the polished thick cross sections were prepared. The paper presents the results of these two analyses, and discusses the advantages and disadvantages of their application for this purpose. Mineralogical analysis of the samples was performed using XRD analysis. It was shown that XRF analysis provides more precise quantification of the elements within one sample, while SEM-EDX analysis gives possibilities for testing of layers with smaller depth within one cross – section.",
publisher = "Springer",
journal = "Conservation and Restoration of Historic Mortars and Masonry Structures",
booktitle = "Determination of the Salt Distribution in the Lime-Based Mortar Samples Using XRF and SEM-EDX Characterization",
doi = "10.1007/978-3-031-31472-8_43"
}

Aškrabić, M., Zakić, D., Savić, A., Miličić, L., Delić-Nikolić, I.,& Vyšvařil, M.. (2023). Determination of the Salt Distribution in the Lime-Based Mortar Samples Using XRF and SEM-EDX Characterization. in Conservation and Restoration of Historic Mortars and Masonry Structures
Springer..
https://doi.org/10.1007/978-3-031-31472-8_43

Aškrabić M, Zakić D, Savić A, Miličić L, Delić-Nikolić I, Vyšvařil M. Determination of the Salt Distribution in the Lime-Based Mortar Samples Using XRF and SEM-EDX Characterization. in Conservation and Restoration of Historic Mortars and Masonry Structures. 2023;.
doi:10.1007/978-3-031-31472-8_43 .

Aškrabić, Marina, Zakić, Dimitrije, Savić, Aleksandar, Miličić, Ljiljana, Delić-Nikolić, Ivana, Vyšvařil, Martin, "Determination of the Salt Distribution in the Lime-Based Mortar Samples Using XRF and SEM-EDX Characterization" in Conservation and Restoration of Historic Mortars and Masonry Structures (2023),
https://doi.org/10.1007/978-3-031-31472-8_43 . .

TY  - JOUR
AU  - Nikolić, Emilija
AU  - Delić-Nikolić, Ivana
AU  - Jovičić, Mladen
AU  - Miličić, Ljiljana
AU  - Mijatović, Nevenka
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/657
AB  - During the MoDeCo2000 scientific and research project on mortars used in the territory of the Roman Danube Limes in Serbia, the biggest challenge was the quest for the provenance of raw materials. The area where Viminacium, the largest city in the province of Moesia Superior developed, with millennial continuity of land use and settlement, was selected as research case study and is presented in this research. People throughout history have always used what they had at hand, and the building remains were not only reused but also recycled for new constructions. Thus, the building material of Roman Viminacium has survived in the landscape through the in situ preserved remains of Roman buildings, as well as in the structures from the later periods, up to today. To the best of our knowledge, the use of natural sediments baked during the self-combustion or combustion of underneath layers (coal in our case) for the purpose of construction was extremely rare in the Roman Empire. In this study, we follow the presence of this type of material precisely in Viminacium construction, naming it natural brick, while focusing on its potential use in lime mortars whose production was perfected in the Roman period and has never been surpassed afterward. Archaeological contexts in which this material was found have been studied, along with simultaneous work in the laboratory and in the field during the research and experimental use of the natural brick in lime mortars. We sought to determine whether this material could have been recognised by Romans in Viminacium as a potential valuable pozzolanic component of mortar, along with or instead of fired brick, being locally available and recyclable. The final confirmation of its pozzolanic features and later discussion open completely new directions for the future research of Viminacium lime mortars.
PB  - MDPI
T2  - Sustainability
T1  - Recycling and Reuse of Building Materials in a Historical Landscape—Viminacium Natural Brick (Serbia)
DO  - 10.3390/su15032824
ER  - 

@article{
author = "Nikolić, Emilija and Delić-Nikolić, Ivana and Jovičić, Mladen and Miličić, Ljiljana and Mijatović, Nevenka",
year = "2023",
abstract = "During the MoDeCo2000 scientific and research project on mortars used in the territory of the Roman Danube Limes in Serbia, the biggest challenge was the quest for the provenance of raw materials. The area where Viminacium, the largest city in the province of Moesia Superior developed, with millennial continuity of land use and settlement, was selected as research case study and is presented in this research. People throughout history have always used what they had at hand, and the building remains were not only reused but also recycled for new constructions. Thus, the building material of Roman Viminacium has survived in the landscape through the in situ preserved remains of Roman buildings, as well as in the structures from the later periods, up to today. To the best of our knowledge, the use of natural sediments baked during the self-combustion or combustion of underneath layers (coal in our case) for the purpose of construction was extremely rare in the Roman Empire. In this study, we follow the presence of this type of material precisely in Viminacium construction, naming it natural brick, while focusing on its potential use in lime mortars whose production was perfected in the Roman period and has never been surpassed afterward. Archaeological contexts in which this material was found have been studied, along with simultaneous work in the laboratory and in the field during the research and experimental use of the natural brick in lime mortars. We sought to determine whether this material could have been recognised by Romans in Viminacium as a potential valuable pozzolanic component of mortar, along with or instead of fired brick, being locally available and recyclable. The final confirmation of its pozzolanic features and later discussion open completely new directions for the future research of Viminacium lime mortars.",
publisher = "MDPI",
journal = "Sustainability",
title = "Recycling and Reuse of Building Materials in a Historical Landscape—Viminacium Natural Brick (Serbia)",
doi = "10.3390/su15032824"
}

Nikolić, E., Delić-Nikolić, I., Jovičić, M., Miličić, L.,& Mijatović, N.. (2023). Recycling and Reuse of Building Materials in a Historical Landscape—Viminacium Natural Brick (Serbia). in Sustainability
MDPI..
https://doi.org/10.3390/su15032824

Nikolić E, Delić-Nikolić I, Jovičić M, Miličić L, Mijatović N. Recycling and Reuse of Building Materials in a Historical Landscape—Viminacium Natural Brick (Serbia). in Sustainability. 2023;.
doi:10.3390/su15032824 .

Nikolić, Emilija, Delić-Nikolić, Ivana, Jovičić, Mladen, Miličić, Ljiljana, Mijatović, Nevenka, "Recycling and Reuse of Building Materials in a Historical Landscape—Viminacium Natural Brick (Serbia)" in Sustainability (2023),
https://doi.org/10.3390/su15032824 . .

TY  - CONF
AU  - Božović, Nikola
AU  - Ćosić, Mladen
AU  - Đoković, Ksenija
AU  - Milićević, Rajo
AU  - Krstić, Marija
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/671
AB  - In the paper, the analysis of the bearing capacity of the pile and the redistribution of the
load on the pile toe and shaft was carried out. The tests were carried out by a static load test (SLT)
incrementally increasing the compressive force on the test pile, and the tension force on the anchor
piles. The test system consisted of one test pile and two anchor piles with a reaction beam. Two
tests were conducted according to the same test program, where the test piles were of the same
length, while the length of the anchor piles in the second test was increased. In the first test, the
anchor pile failed, while in the second test, the test pile failed. Based on the achieved limit values of
settlement of the test and anchor pile, the bearing capacity of the test pile at the toe and shaft was
determined. Subsequently, a CPT test was carried out and the bearing capacity was calculated
according to the LPC-CPT method.
C3  - GEOTECHNICAL ASPECTS OF CIVIL ENGINEERING AND EARTHQUAKE ENGINEERING - Vrnjačka Banja
T1  - Pile capacity distribution analysis for SLT with reactive system
EP  - 288
SP  - 282
UR  - https://hdl.handle.net/21.15107/rcub_rims_671
ER  - 

@conference{
author = "Božović, Nikola and Ćosić, Mladen and Đoković, Ksenija and Milićević, Rajo and Krstić, Marija",
year = "2023",
abstract = "In the paper, the analysis of the bearing capacity of the pile and the redistribution of the
load on the pile toe and shaft was carried out. The tests were carried out by a static load test (SLT)
incrementally increasing the compressive force on the test pile, and the tension force on the anchor
piles. The test system consisted of one test pile and two anchor piles with a reaction beam. Two
tests were conducted according to the same test program, where the test piles were of the same
length, while the length of the anchor piles in the second test was increased. In the first test, the
anchor pile failed, while in the second test, the test pile failed. Based on the achieved limit values of
settlement of the test and anchor pile, the bearing capacity of the test pile at the toe and shaft was
determined. Subsequently, a CPT test was carried out and the bearing capacity was calculated
according to the LPC-CPT method.",
journal = "GEOTECHNICAL ASPECTS OF CIVIL ENGINEERING AND EARTHQUAKE ENGINEERING - Vrnjačka Banja",
title = "Pile capacity distribution analysis for SLT with reactive system",
pages = "288-282",
url = "https://hdl.handle.net/21.15107/rcub_rims_671"
}

Božović, N., Ćosić, M., Đoković, K., Milićević, R.,& Krstić, M.. (2023). Pile capacity distribution analysis for SLT with reactive system. in GEOTECHNICAL ASPECTS OF CIVIL ENGINEERING AND EARTHQUAKE ENGINEERING - Vrnjačka Banja, 282-288.
https://hdl.handle.net/21.15107/rcub_rims_671

Božović N, Ćosić M, Đoković K, Milićević R, Krstić M. Pile capacity distribution analysis for SLT with reactive system. in GEOTECHNICAL ASPECTS OF CIVIL ENGINEERING AND EARTHQUAKE ENGINEERING - Vrnjačka Banja. 2023;:282-288.
https://hdl.handle.net/21.15107/rcub_rims_671 .

Božović, Nikola, Ćosić, Mladen, Đoković, Ksenija, Milićević, Rajo, Krstić, Marija, "Pile capacity distribution analysis for SLT with reactive system" in GEOTECHNICAL ASPECTS OF CIVIL ENGINEERING AND EARTHQUAKE ENGINEERING - Vrnjačka Banja (2023):282-288,
https://hdl.handle.net/21.15107/rcub_rims_671 .

TY  - CONF
AU  - Ćosić, Mladen
AU  - Šušić, Nenad
AU  - Prica, Marko
AU  - Božović, Nikola
AU  - Đoković, Ksenija
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/672
AB  - U radu je prikazan sadržaj predloženog dokumenta Elaborata ispitivanja šipova i jasnije
su razjašnjene aktivnosti koje su obuhvaćene ovim dokumentom. Na primeru objekta Ušće 2
demonstrirana je primena jednog dela rešenja o ispitivanju šipova, a što bi se našlo u samom
elaboratu. Analizirane su količine (obim) ispitivanja šipova po tipovima testova i analizirane su
aktivnosti u okviru svakog pojedinačnog testa. Naglašeno je da je potrebna bolja saradnja na
relaciji projektant, izvođač i nadzora prema ispitivaču šipova.
C3  - GEOTEHNIČKI ASPEKTI GRAĐEVINARSTVA I ZEMLJOTRESNO INŽENJERSTVO - Vrnjačka Banja
T1  - Analiza modela upravljanja kvalitetom ispitivanja šipova
EP  - 581
SP  - 571
UR  - https://hdl.handle.net/21.15107/rcub_rims_672
ER  - 

@conference{
author = "Ćosić, Mladen and Šušić, Nenad and Prica, Marko and Božović, Nikola and Đoković, Ksenija",
year = "2023",
abstract = "U radu je prikazan sadržaj predloženog dokumenta Elaborata ispitivanja šipova i jasnije
su razjašnjene aktivnosti koje su obuhvaćene ovim dokumentom. Na primeru objekta Ušće 2
demonstrirana je primena jednog dela rešenja o ispitivanju šipova, a što bi se našlo u samom
elaboratu. Analizirane su količine (obim) ispitivanja šipova po tipovima testova i analizirane su
aktivnosti u okviru svakog pojedinačnog testa. Naglašeno je da je potrebna bolja saradnja na
relaciji projektant, izvođač i nadzora prema ispitivaču šipova.",
journal = "GEOTEHNIČKI ASPEKTI GRAĐEVINARSTVA I ZEMLJOTRESNO INŽENJERSTVO - Vrnjačka Banja",
title = "Analiza modela upravljanja kvalitetom ispitivanja šipova",
pages = "581-571",
url = "https://hdl.handle.net/21.15107/rcub_rims_672"
}

Ćosić, M., Šušić, N., Prica, M., Božović, N.,& Đoković, K.. (2023). Analiza modela upravljanja kvalitetom ispitivanja šipova. in GEOTEHNIČKI ASPEKTI GRAĐEVINARSTVA I ZEMLJOTRESNO INŽENJERSTVO - Vrnjačka Banja, 571-581.
https://hdl.handle.net/21.15107/rcub_rims_672

Ćosić M, Šušić N, Prica M, Božović N, Đoković K. Analiza modela upravljanja kvalitetom ispitivanja šipova. in GEOTEHNIČKI ASPEKTI GRAĐEVINARSTVA I ZEMLJOTRESNO INŽENJERSTVO - Vrnjačka Banja. 2023;:571-581.
https://hdl.handle.net/21.15107/rcub_rims_672 .

Ćosić, Mladen, Šušić, Nenad, Prica, Marko, Božović, Nikola, Đoković, Ksenija, "Analiza modela upravljanja kvalitetom ispitivanja šipova" in GEOTEHNIČKI ASPEKTI GRAĐEVINARSTVA I ZEMLJOTRESNO INŽENJERSTVO - Vrnjačka Banja (2023):571-581,
https://hdl.handle.net/21.15107/rcub_rims_672 .

TY  - CONF
AU  - Ćosić, Mladen
AU  - Šušić, Nenad
AU  - Prica, Marko
AU  - Božović, Nikola
AU  - Đoković, Ksenija
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/673
AB  - U radu je ukazano na postojeće probleme koji se pojavljuju prilikom planiranja, u toku i
nakon ispitivanja šipova. U tom smislu, na osnovu iskustava autora rada, predloženi su modeli
upravljanja kvalitetom ispitivanja šipova kojima se efikasnije planiraju i rešavaju sve aktivnosti
ispitivanja šipova i utiče na donošenje odluka koje se u praksi neadekvatno rešavaju. Posebno je
naglašeno uvođenje i primena Elaborata ispitivanja šipova kao nova forma dokumenta u kojem bi
se celokupna aktivnost planiranja, ispitivanja i donošenja odluka nakon ispitivnaja adekvatno
ispratili.
C3  - GEOTEHNIČKI ASPEKTI GRAĐEVINARSTVA I ZEMLJOTRESNO INŽENJERSTVO - Vrnjačka Banja
T1  - Razvoj modela upravljanja kvalitetom ispitivanja šipova
EP  - 570
SP  - 558
UR  - https://hdl.handle.net/21.15107/rcub_rims_673
ER  - 

@conference{
author = "Ćosić, Mladen and Šušić, Nenad and Prica, Marko and Božović, Nikola and Đoković, Ksenija",
year = "2023",
abstract = "U radu je ukazano na postojeće probleme koji se pojavljuju prilikom planiranja, u toku i
nakon ispitivanja šipova. U tom smislu, na osnovu iskustava autora rada, predloženi su modeli
upravljanja kvalitetom ispitivanja šipova kojima se efikasnije planiraju i rešavaju sve aktivnosti
ispitivanja šipova i utiče na donošenje odluka koje se u praksi neadekvatno rešavaju. Posebno je
naglašeno uvođenje i primena Elaborata ispitivanja šipova kao nova forma dokumenta u kojem bi
se celokupna aktivnost planiranja, ispitivanja i donošenja odluka nakon ispitivnaja adekvatno
ispratili.",
journal = "GEOTEHNIČKI ASPEKTI GRAĐEVINARSTVA I ZEMLJOTRESNO INŽENJERSTVO - Vrnjačka Banja",
title = "Razvoj modela upravljanja kvalitetom ispitivanja šipova",
pages = "570-558",
url = "https://hdl.handle.net/21.15107/rcub_rims_673"
}

Ćosić, M., Šušić, N., Prica, M., Božović, N.,& Đoković, K.. (2023). Razvoj modela upravljanja kvalitetom ispitivanja šipova. in GEOTEHNIČKI ASPEKTI GRAĐEVINARSTVA I ZEMLJOTRESNO INŽENJERSTVO - Vrnjačka Banja, 558-570.
https://hdl.handle.net/21.15107/rcub_rims_673

Ćosić M, Šušić N, Prica M, Božović N, Đoković K. Razvoj modela upravljanja kvalitetom ispitivanja šipova. in GEOTEHNIČKI ASPEKTI GRAĐEVINARSTVA I ZEMLJOTRESNO INŽENJERSTVO - Vrnjačka Banja. 2023;:558-570.
https://hdl.handle.net/21.15107/rcub_rims_673 .

Ćosić, Mladen, Šušić, Nenad, Prica, Marko, Božović, Nikola, Đoković, Ksenija, "Razvoj modela upravljanja kvalitetom ispitivanja šipova" in GEOTEHNIČKI ASPEKTI GRAĐEVINARSTVA I ZEMLJOTRESNO INŽENJERSTVO - Vrnjačka Banja (2023):558-570,
https://hdl.handle.net/21.15107/rcub_rims_673 .

TY  - CONF
AU  - Rakić, Dragoslav
AU  - Božović, Nikola
AU  - Stevanović, Miloš
AU  - Bogdanović, Milan
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/676
AB  - U Srbiji je počela izgradnja autoputa E-80 koji će predstavljati saobraćajno čvorište
zapadnog Balkana i biće deo glavne regionalne transportne mreže jugoistočne Evrope. Njegova
ukupna dužina kroz Srbiju iznosi 77 km, a prva deonica u dužini od 5.5 km je završena i puštena u
saobraćaj krajem jula 2023. god. To je prva od četiri deonice Sektora 1 čija je dužina 32.65 km. U
sklopu petlje „Merošina 1“ izgrađen je nadvožnjak koji je oslonjen na devet stubnih mesta na
međusobnom rastojanju od oko 25 m. Svaki stub je fundiran na šipovima i to sa predloženim
rasporedom od 2 šipa u grupi. U radu su na osnovu izvršenih geotehničkih istraživanja terena,
analizirani rezultati nosivosti vertikalno opterećenog šipa prečnika 1.2 m i dužine šipa od L = 18
m. Analiza je izvršena primenom različitih metoda koristeći rezultate statičke penetracije-CPT,
laboratorijskih ispitivanja tla kao i probnog opterećenja šipa.
C3  - GEOTEHNIČKI ASPEKTI GRAĐEVINARSTVA I ZEMLJOTRESNO INŽENJERSTVO - Vrnjačka Banja
T1  - Analiza nosivosti vertikalno opterećenog šipa za potrebe izgradnje petlje „Merošina 1“ na autoputu E-80 deonica: Niš –Merošina
EP  - 403
SP  - 392
UR  - https://hdl.handle.net/21.15107/rcub_rims_676
ER  - 

@conference{
author = "Rakić, Dragoslav and Božović, Nikola and Stevanović, Miloš and Bogdanović, Milan",
year = "2023",
abstract = "U Srbiji je počela izgradnja autoputa E-80 koji će predstavljati saobraćajno čvorište
zapadnog Balkana i biće deo glavne regionalne transportne mreže jugoistočne Evrope. Njegova
ukupna dužina kroz Srbiju iznosi 77 km, a prva deonica u dužini od 5.5 km je završena i puštena u
saobraćaj krajem jula 2023. god. To je prva od četiri deonice Sektora 1 čija je dužina 32.65 km. U
sklopu petlje „Merošina 1“ izgrađen je nadvožnjak koji je oslonjen na devet stubnih mesta na
međusobnom rastojanju od oko 25 m. Svaki stub je fundiran na šipovima i to sa predloženim
rasporedom od 2 šipa u grupi. U radu su na osnovu izvršenih geotehničkih istraživanja terena,
analizirani rezultati nosivosti vertikalno opterećenog šipa prečnika 1.2 m i dužine šipa od L = 18
m. Analiza je izvršena primenom različitih metoda koristeći rezultate statičke penetracije-CPT,
laboratorijskih ispitivanja tla kao i probnog opterećenja šipa.",
journal = "GEOTEHNIČKI ASPEKTI GRAĐEVINARSTVA I ZEMLJOTRESNO INŽENJERSTVO - Vrnjačka Banja",
title = "Analiza nosivosti vertikalno opterećenog šipa za potrebe izgradnje petlje „Merošina 1“ na autoputu E-80 deonica: Niš –Merošina",
pages = "403-392",
url = "https://hdl.handle.net/21.15107/rcub_rims_676"
}

Rakić, D., Božović, N., Stevanović, M.,& Bogdanović, M.. (2023). Analiza nosivosti vertikalno opterećenog šipa za potrebe izgradnje petlje „Merošina 1“ na autoputu E-80 deonica: Niš –Merošina. in GEOTEHNIČKI ASPEKTI GRAĐEVINARSTVA I ZEMLJOTRESNO INŽENJERSTVO - Vrnjačka Banja, 392-403.
https://hdl.handle.net/21.15107/rcub_rims_676

Rakić D, Božović N, Stevanović M, Bogdanović M. Analiza nosivosti vertikalno opterećenog šipa za potrebe izgradnje petlje „Merošina 1“ na autoputu E-80 deonica: Niš –Merošina. in GEOTEHNIČKI ASPEKTI GRAĐEVINARSTVA I ZEMLJOTRESNO INŽENJERSTVO - Vrnjačka Banja. 2023;:392-403.
https://hdl.handle.net/21.15107/rcub_rims_676 .

Rakić, Dragoslav, Božović, Nikola, Stevanović, Miloš, Bogdanović, Milan, "Analiza nosivosti vertikalno opterećenog šipa za potrebe izgradnje petlje „Merošina 1“ na autoputu E-80 deonica: Niš –Merošina" in GEOTEHNIČKI ASPEKTI GRAĐEVINARSTVA I ZEMLJOTRESNO INŽENJERSTVO - Vrnjačka Banja (2023):392-403,
https://hdl.handle.net/21.15107/rcub_rims_676 .

TY  - CONF
AU  - Krstić, Marija
AU  - Božović, Nikola
AU  - Milićević, Rajo
AU  - Đoković, Ksenija
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/675
AB  - The paper presents the technical solution for the foundation of the facilities of the
Boiler House for the energy utilization of waste and chimneys. Next to the boiler house, the
construction of a Bunker for waste storage is planned, which is founded at a depth of 6.0m below
the top of the boiler house's base plate. Based on the conditions of limited settlement, the
foundation of the boiler house was envisioned on drilled piles, while a hidden pile wall was
designed to protect the foundation pit of the bunker, which has the function of preventing large
deformations of the boiler house structure and does not jeopardize its stability. Calculations of the
bearing capacity of the piles based on the soil parameters from the geotechnical study are
presented, as well as the results of the pile tests with axial vertical pressure force.
C3  - GEOTECHNICAL ASPECTS OF CIVIL ENGINEERING AND EARTHQUAKE ENGINEERING - Vrnjačka Banja
T1  - Technical solution for the foundation of the elixire group waste to energy treatment in Prahovo
EP  - 371
SP  - 364
UR  - https://hdl.handle.net/21.15107/rcub_rims_675
ER  - 

@conference{
author = "Krstić, Marija and Božović, Nikola and Milićević, Rajo and Đoković, Ksenija",
year = "2023",
abstract = "The paper presents the technical solution for the foundation of the facilities of the
Boiler House for the energy utilization of waste and chimneys. Next to the boiler house, the
construction of a Bunker for waste storage is planned, which is founded at a depth of 6.0m below
the top of the boiler house's base plate. Based on the conditions of limited settlement, the
foundation of the boiler house was envisioned on drilled piles, while a hidden pile wall was
designed to protect the foundation pit of the bunker, which has the function of preventing large
deformations of the boiler house structure and does not jeopardize its stability. Calculations of the
bearing capacity of the piles based on the soil parameters from the geotechnical study are
presented, as well as the results of the pile tests with axial vertical pressure force.",
journal = "GEOTECHNICAL ASPECTS OF CIVIL ENGINEERING AND EARTHQUAKE ENGINEERING - Vrnjačka Banja",
title = "Technical solution for the foundation of the elixire group waste to energy treatment in Prahovo",
pages = "371-364",
url = "https://hdl.handle.net/21.15107/rcub_rims_675"
}

Krstić, M., Božović, N., Milićević, R.,& Đoković, K.. (2023). Technical solution for the foundation of the elixire group waste to energy treatment in Prahovo. in GEOTECHNICAL ASPECTS OF CIVIL ENGINEERING AND EARTHQUAKE ENGINEERING - Vrnjačka Banja, 364-371.
https://hdl.handle.net/21.15107/rcub_rims_675

Krstić M, Božović N, Milićević R, Đoković K. Technical solution for the foundation of the elixire group waste to energy treatment in Prahovo. in GEOTECHNICAL ASPECTS OF CIVIL ENGINEERING AND EARTHQUAKE ENGINEERING - Vrnjačka Banja. 2023;:364-371.
https://hdl.handle.net/21.15107/rcub_rims_675 .

Krstić, Marija, Božović, Nikola, Milićević, Rajo, Đoković, Ksenija, "Technical solution for the foundation of the elixire group waste to energy treatment in Prahovo" in GEOTECHNICAL ASPECTS OF CIVIL ENGINEERING AND EARTHQUAKE ENGINEERING - Vrnjačka Banja (2023):364-371,
https://hdl.handle.net/21.15107/rcub_rims_675 .

TY  - THES
AU  - Flajs, Željko
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/659
AB  - Ponašanje struktura pod delovanjem različitih vrsta opterećenja
određene su njenim deformacionim karakteristikama, globalnim
deformacionim karakteristikama - pomeranjima i rotacijama i lokalnim
deformacionim karakteristikama - dilatacijama u osnovnom materijalu
strukture. Poznavanjem globalnih i lokalnih deformacionih karakteristika
strukture u toku njene eksploatacije ostvarujemo mogućnost da pratimo
ponašanje strukture u celini ili nekog njenog segmenta, kao i da u slučaju pojave
oštećenja, koja mogu nastati na osnovu različitih uzroka, pravovremeno
delujemo i sprečimo nastajanje havarijskih događaja koji kao posledicu mogu
imati kako ekonomske, tako i posledice sa ljudskim žrtvama.
Istraživanje u okviru ove disertacije obuhvata razvoj mernog
mehatroničkog sistema za nadzor ugiba grednih struktura praćenjem dilatacija u
osnovnom materijalu. Za utvrđivanje globalne deformacijske veličine
vertikalnog pomeranja - ugiba, na osnovu izmerenih lokalnih deformacionih
veličina, tj. posredno utvrđivanje ugiba strukture na njenoj ukupnoj dužini, na
osnovu poznatih vrednosti dilatacija u osnovnom materijalu strukture, usled
delujućeg opterećenja, razvijen je numerički postupak proračuna koji na osnovu
izmerenih vrednosti dilatacija u specifičnim tačkama na strukturi izračunava
vrednosti ugiba strukture, na celokupnom rasponu. Vrednosti dobijenih ugiba
primenom ovog postupka upoređene su sa vrednostima dobijenih putem direktnog
merenja ugiba na eksperimentalnim modelima i na realnoj strukturi.

Istraživanje je obuhvatalo tri faze:
1. Eksperimentalno ispitivanje na modelu čeličnog I nosača statičkog sistema
proste grede, direktno merenje ugiba usled nekoliko nivoa delujućeg opterećenja,
posredno izračunavanje ugiba primenom razvijenog numeričkog postupka
proračuna na osnovu izmerenih vrednosti dilatacija u osnovnom materijalu i
upoređenje vrednosti dobijenih na osnovu navedena dva postupka.
2. Eksperimentalno ispitivanje na strukturi nosača kranske staze pod delujućim
opterećenjem (realna struktura u eksploataciji), direktno merenje ugiba usled
delujućeg opterećenja, posredno izračunavanje ugiba primenom razvijenog
numeričkog postupka proračuna na osnovu izmerenih vrednosti dilatacija u
osnovnom materijalu i upoređenje vrednosti dobijenih na osnovu navedena dva
postupka.
3. Razvoj i provera rada mernog mehatroničkog sistema za nadzor ugiba grednih
struktura praćenjem dilatacija u osnovnom materijalu, u koji je implementiran
razvijeni numerički postupak proračuna, na eksperimentalnom modelu
statičkog sistema proste grede, direktno merenje pomeranja usled nekoliko
nivoa delujućeg opterećenja i upoređenje vrednosti dobijenih na osnovu navedena
dva postupka.
Kod prve dve faze istraživanja, kao i kod razvijenog mehatroničkog
sistema u koji je implementiran predloženi numerički postupak proračuna,
nisu zabeležene relativne razlike veće od 6 %, između direktno merenih i
posredno određenih vrednosti ugiba.
PB  - Univerzitet u Beogradu, Mašinski fakultet
T1  - Merni mehatronički sistem za nadzor ugiba grednih struktura praćenjem dilatacija u osnovnom materijalu
UR  - https://hdl.handle.net/21.15107/rcub_rims_659
ER  - 

@phdthesis{
author = "Flajs, Željko",
year = "2023",
abstract = "Ponašanje struktura pod delovanjem različitih vrsta opterećenja
određene su njenim deformacionim karakteristikama, globalnim
deformacionim karakteristikama - pomeranjima i rotacijama i lokalnim
deformacionim karakteristikama - dilatacijama u osnovnom materijalu
strukture. Poznavanjem globalnih i lokalnih deformacionih karakteristika
strukture u toku njene eksploatacije ostvarujemo mogućnost da pratimo
ponašanje strukture u celini ili nekog njenog segmenta, kao i da u slučaju pojave
oštećenja, koja mogu nastati na osnovu različitih uzroka, pravovremeno
delujemo i sprečimo nastajanje havarijskih događaja koji kao posledicu mogu
imati kako ekonomske, tako i posledice sa ljudskim žrtvama.
Istraživanje u okviru ove disertacije obuhvata razvoj mernog
mehatroničkog sistema za nadzor ugiba grednih struktura praćenjem dilatacija u
osnovnom materijalu. Za utvrđivanje globalne deformacijske veličine
vertikalnog pomeranja - ugiba, na osnovu izmerenih lokalnih deformacionih
veličina, tj. posredno utvrđivanje ugiba strukture na njenoj ukupnoj dužini, na
osnovu poznatih vrednosti dilatacija u osnovnom materijalu strukture, usled
delujućeg opterećenja, razvijen je numerički postupak proračuna koji na osnovu
izmerenih vrednosti dilatacija u specifičnim tačkama na strukturi izračunava
vrednosti ugiba strukture, na celokupnom rasponu. Vrednosti dobijenih ugiba
primenom ovog postupka upoređene su sa vrednostima dobijenih putem direktnog
merenja ugiba na eksperimentalnim modelima i na realnoj strukturi.

Istraživanje je obuhvatalo tri faze:
1. Eksperimentalno ispitivanje na modelu čeličnog I nosača statičkog sistema
proste grede, direktno merenje ugiba usled nekoliko nivoa delujućeg opterećenja,
posredno izračunavanje ugiba primenom razvijenog numeričkog postupka
proračuna na osnovu izmerenih vrednosti dilatacija u osnovnom materijalu i
upoređenje vrednosti dobijenih na osnovu navedena dva postupka.
2. Eksperimentalno ispitivanje na strukturi nosača kranske staze pod delujućim
opterećenjem (realna struktura u eksploataciji), direktno merenje ugiba usled
delujućeg opterećenja, posredno izračunavanje ugiba primenom razvijenog
numeričkog postupka proračuna na osnovu izmerenih vrednosti dilatacija u
osnovnom materijalu i upoređenje vrednosti dobijenih na osnovu navedena dva
postupka.
3. Razvoj i provera rada mernog mehatroničkog sistema za nadzor ugiba grednih
struktura praćenjem dilatacija u osnovnom materijalu, u koji je implementiran
razvijeni numerički postupak proračuna, na eksperimentalnom modelu
statičkog sistema proste grede, direktno merenje pomeranja usled nekoliko
nivoa delujućeg opterećenja i upoređenje vrednosti dobijenih na osnovu navedena
dva postupka.
Kod prve dve faze istraživanja, kao i kod razvijenog mehatroničkog
sistema u koji je implementiran predloženi numerički postupak proračuna,
nisu zabeležene relativne razlike veće od 6 %, između direktno merenih i
posredno određenih vrednosti ugiba.",
publisher = "Univerzitet u Beogradu, Mašinski fakultet",
title = "Merni mehatronički sistem za nadzor ugiba grednih struktura praćenjem dilatacija u osnovnom materijalu",
url = "https://hdl.handle.net/21.15107/rcub_rims_659"
}

Flajs, Ž.. (2023). Merni mehatronički sistem za nadzor ugiba grednih struktura praćenjem dilatacija u osnovnom materijalu. 
Univerzitet u Beogradu, Mašinski fakultet..
https://hdl.handle.net/21.15107/rcub_rims_659

Flajs Ž. Merni mehatronički sistem za nadzor ugiba grednih struktura praćenjem dilatacija u osnovnom materijalu. 2023;.
https://hdl.handle.net/21.15107/rcub_rims_659 .

Flajs, Željko, "Merni mehatronički sistem za nadzor ugiba grednih struktura praćenjem dilatacija u osnovnom materijalu" (2023),
https://hdl.handle.net/21.15107/rcub_rims_659 .

TY  - JOUR
AU  - Stanisavljević, Gorjana
AU  - Golubović Matić, Darinka
AU  - Komnenović, Milorad
AU  - Vasović Maksimović, Ivana
AU  - Flajs, Željko
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/666
AB  - This paper focuses on the study of the strength of facade sandwich panels used in building construction. The paper describes the results of experimental and numerical research on the behavior of sandwich panels made of polyisocyanurate core (PIR) and their structural connections when exposed to tensile and compressive loads. In the initial phase of this study, laboratory tests were performed to determine the physical and mechanical characteristics of the material from which the sandwich panels are made. Laboratory tensile and compression tests were performed on small samples of sandwich facade panels. In order to verify the obtained results, they were compared with the numerical analysis performed in the ANSYS software. The numerical model was found to accurately predict the results of the laboratory tests, suggesting that the model can be used to predict the behavior of these panels under different loads in service. The study showed that the foam core sandwich panel exhibits excellent mechanical properties. The results indicate the suitability of foam-based composite structures in the construction industry for various applications, such as roof and wall structures. The findings of this study may help in the development of lightweight and durable construction materials for the industry.
PB  - MDPI
T2  - Buildings
T1  - Numerical and Experimental Study on Loading Behavior of Facade Sandwich Panels
IS  - 6
SP  - 1554
VL  - 13
DO  - 10.3390/buildings13061554
ER  - 

@article{
author = "Stanisavljević, Gorjana and Golubović Matić, Darinka and Komnenović, Milorad and Vasović Maksimović, Ivana and Flajs, Željko",
year = "2023",
abstract = "This paper focuses on the study of the strength of facade sandwich panels used in building construction. The paper describes the results of experimental and numerical research on the behavior of sandwich panels made of polyisocyanurate core (PIR) and their structural connections when exposed to tensile and compressive loads. In the initial phase of this study, laboratory tests were performed to determine the physical and mechanical characteristics of the material from which the sandwich panels are made. Laboratory tensile and compression tests were performed on small samples of sandwich facade panels. In order to verify the obtained results, they were compared with the numerical analysis performed in the ANSYS software. The numerical model was found to accurately predict the results of the laboratory tests, suggesting that the model can be used to predict the behavior of these panels under different loads in service. The study showed that the foam core sandwich panel exhibits excellent mechanical properties. The results indicate the suitability of foam-based composite structures in the construction industry for various applications, such as roof and wall structures. The findings of this study may help in the development of lightweight and durable construction materials for the industry.",
publisher = "MDPI",
journal = "Buildings",
title = "Numerical and Experimental Study on Loading Behavior of Facade Sandwich Panels",
number = "6",
pages = "1554",
volume = "13",
doi = "10.3390/buildings13061554"
}

Stanisavljević, G., Golubović Matić, D., Komnenović, M., Vasović Maksimović, I.,& Flajs, Ž.. (2023). Numerical and Experimental Study on Loading Behavior of Facade Sandwich Panels. in Buildings
MDPI., 13(6), 1554.
https://doi.org/10.3390/buildings13061554

Stanisavljević G, Golubović Matić D, Komnenović M, Vasović Maksimović I, Flajs Ž. Numerical and Experimental Study on Loading Behavior of Facade Sandwich Panels. in Buildings. 2023;13(6):1554.
doi:10.3390/buildings13061554 .

Stanisavljević, Gorjana, Golubović Matić, Darinka, Komnenović, Milorad, Vasović Maksimović, Ivana, Flajs, Željko, "Numerical and Experimental Study on Loading Behavior of Facade Sandwich Panels" in Buildings, 13, no. 6 (2023):1554,
https://doi.org/10.3390/buildings13061554 . .

TY  - JOUR
AU  - Aleksić, Vujadin
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/664
AB  - Designing, constructing and putting into operation a hydroelectric power plant includes complex
tasks. Stresses of turbine and hydromechanical equipment of hydro power plants arise during the
production of parts and assembly of equipment (residual stresses), in the process of performing
functional requirements in exploitation and in the disturbed process of exploitation.
After several decades of constant exploitation of the horizontal bulb turbine, which is an integral
part of the hydroelectric power unit, empirically, the formation of a crack occurs in the turbine
shaft due to the influence of corrosion, erosion and cavitation.
Through experimental tests and calculations it has been determined that values of bending stresses
of the turbine, which occur due to the action of fatigue and corrosion, as well as stress
concentration, are bigger than 25 MPa for flanges exposed to water, and in other case bigger than
40 MPa for flanges exposed to `corrosive water` and can cause the occurrence of surface cracks
on the transition radius between the cylindrical part of the shaft and the flange. It has been
determined that stress values in the zone under the influence of bending stresses were bigger than
allowable values, which led to the occurrence of many cracks due to fatigue corrosion. One of
those cracks caused the failure of the shaft and of the whole turbine.
T2  - Advanced Technologies & Materials
T1  - Presence of crack due the constant exploitation of turbine shaft
EP  - 25
IS  - 1
SP  - 21
VL  - 48
DO  - 10.24867/ATM-2023-1-004
ER  - 

@article{
author = "Aleksić, Vujadin",
year = "2023",
abstract = "Designing, constructing and putting into operation a hydroelectric power plant includes complex
tasks. Stresses of turbine and hydromechanical equipment of hydro power plants arise during the
production of parts and assembly of equipment (residual stresses), in the process of performing
functional requirements in exploitation and in the disturbed process of exploitation.
After several decades of constant exploitation of the horizontal bulb turbine, which is an integral
part of the hydroelectric power unit, empirically, the formation of a crack occurs in the turbine
shaft due to the influence of corrosion, erosion and cavitation.
Through experimental tests and calculations it has been determined that values of bending stresses
of the turbine, which occur due to the action of fatigue and corrosion, as well as stress
concentration, are bigger than 25 MPa for flanges exposed to water, and in other case bigger than
40 MPa for flanges exposed to `corrosive water` and can cause the occurrence of surface cracks
on the transition radius between the cylindrical part of the shaft and the flange. It has been
determined that stress values in the zone under the influence of bending stresses were bigger than
allowable values, which led to the occurrence of many cracks due to fatigue corrosion. One of
those cracks caused the failure of the shaft and of the whole turbine.",
journal = "Advanced Technologies & Materials",
title = "Presence of crack due the constant exploitation of turbine shaft",
pages = "25-21",
number = "1",
volume = "48",
doi = "10.24867/ATM-2023-1-004"
}

Aleksić, V.. (2023). Presence of crack due the constant exploitation of turbine shaft. in Advanced Technologies & Materials, 48(1), 21-25.
https://doi.org/10.24867/ATM-2023-1-004

Aleksić V. Presence of crack due the constant exploitation of turbine shaft. in Advanced Technologies & Materials. 2023;48(1):21-25.
doi:10.24867/ATM-2023-1-004 .

Aleksić, Vujadin, "Presence of crack due the constant exploitation of turbine shaft" in Advanced Technologies & Materials, 48, no. 1 (2023):21-25,
https://doi.org/10.24867/ATM-2023-1-004 . .

TY  - JOUR
AU  - Maksimović, Ana
AU  - Petrovski, Blagoj
AU  - Milović, Ljubica
AU  - Zečević, Bojana
AU  - Aleksić, Vujadin
AU  - Bulatović, Srđan
AU  - Bekrić, Dragoljub
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/660
AB  - Most serious weldment failures have catastrophic consequences in terms of damage to other equipment, loss of production, and risks to worker health and safety. For the above reasons, there is a tendency to find the line between safety and disaster, and this requires a guarantee of the integrity of the welded structure even if a crack is present. The structural and mechanical heterogeneity of a welded joint affects its resistance to cracking in both the elastic and plastic regions. Therefore, it is important to define the test method and the position of the fatigue crack. The behavior of an elasto-plastic material, during stable crack growth can be described by the J-Δa diagram. As the crack propagates, a point on the curve is defined, which represents the critical value of the J-integral. The aim of this experiment is to determine JIC value and the procedure is reflected in the determination of the R-curve, i.e., the J‒Δa curve, which consists of the value of the J-integral for uniform crack increments Δa. In this paper, precracked SEN(B) specimens with the fatigue crack positioned in the weld metal (WM) were tested according to standard ASTM E1820 at room temperature (RT), -20 °C and -30 °C.
PB  - Elsevier B.V.
T2  - Procedia Structural Integrity
T1  - Experimental Determination of JIc for a HSLA Steel Welded Joint
EP  - 194
SP  - 190
VL  - 48
DO  - 10.1016/j.prostr.2023.07.147
ER  - 

@article{
author = "Maksimović, Ana and Petrovski, Blagoj and Milović, Ljubica and Zečević, Bojana and Aleksić, Vujadin and Bulatović, Srđan and Bekrić, Dragoljub",
year = "2023",
abstract = "Most serious weldment failures have catastrophic consequences in terms of damage to other equipment, loss of production, and risks to worker health and safety. For the above reasons, there is a tendency to find the line between safety and disaster, and this requires a guarantee of the integrity of the welded structure even if a crack is present. The structural and mechanical heterogeneity of a welded joint affects its resistance to cracking in both the elastic and plastic regions. Therefore, it is important to define the test method and the position of the fatigue crack. The behavior of an elasto-plastic material, during stable crack growth can be described by the J-Δa diagram. As the crack propagates, a point on the curve is defined, which represents the critical value of the J-integral. The aim of this experiment is to determine JIC value and the procedure is reflected in the determination of the R-curve, i.e., the J‒Δa curve, which consists of the value of the J-integral for uniform crack increments Δa. In this paper, precracked SEN(B) specimens with the fatigue crack positioned in the weld metal (WM) were tested according to standard ASTM E1820 at room temperature (RT), -20 °C and -30 °C.",
publisher = "Elsevier B.V.",
journal = "Procedia Structural Integrity",
title = "Experimental Determination of JIc for a HSLA Steel Welded Joint",
pages = "194-190",
volume = "48",
doi = "10.1016/j.prostr.2023.07.147"
}

Maksimović, A., Petrovski, B., Milović, L., Zečević, B., Aleksić, V., Bulatović, S.,& Bekrić, D.. (2023). Experimental Determination of JIc for a HSLA Steel Welded Joint. in Procedia Structural Integrity
Elsevier B.V.., 48, 190-194.
https://doi.org/10.1016/j.prostr.2023.07.147

Maksimović A, Petrovski B, Milović L, Zečević B, Aleksić V, Bulatović S, Bekrić D. Experimental Determination of JIc for a HSLA Steel Welded Joint. in Procedia Structural Integrity. 2023;48:190-194.
doi:10.1016/j.prostr.2023.07.147 .

Maksimović, Ana, Petrovski, Blagoj, Milović, Ljubica, Zečević, Bojana, Aleksić, Vujadin, Bulatović, Srđan, Bekrić, Dragoljub, "Experimental Determination of JIc for a HSLA Steel Welded Joint" in Procedia Structural Integrity, 48 (2023):190-194,
https://doi.org/10.1016/j.prostr.2023.07.147 . .

TY  - JOUR
AU  - Bulatović, Srđan
AU  - Aleksić, Vujadin
AU  - Milović, Ljubica
AU  - Zečević, Bojana
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/656
AB  - Fracture mechanics, as a scientific discipline dealing with the study of cracks in welded structures, has defined parameters and introduced new test methods in order to better determine the tendency to crack growth, critical conditions for rapid fracture development, material resistance to rapid crack propagation and better definition of other parameters for assessing the behaviour of the material and the safety of the structure in the presence of cracks. In this paper, the focus is on determination of the parameter of elastic-plastic mechanics of J-integral, more precisely, on examination of the critical value of J-integral (JIc) of the welded joint of HSLA steel. The position of the tip of the fatigue crack and the properties of the region where fracture propagation occurs are main indicators of influence of the heterogeneity of the NN-70 welded structure and mechanical properties. Resistance to cracking in the welded joint shows that the heterogeneity has a major impact on the resistance to crack initiation and propagation, in elastic as well as in the plastic region.
PB  - Strojarski Facultet
T2  - Tehnicki Vjesnik
T1  - Experimental Determination of the Critical Value of the J-Integral that Refers to the HSLA Steel Welded Joint
DO  - 10.17559/TV-20220419093052
ER  - 

@article{
author = "Bulatović, Srđan and Aleksić, Vujadin and Milović, Ljubica and Zečević, Bojana",
year = "2023",
abstract = "Fracture mechanics, as a scientific discipline dealing with the study of cracks in welded structures, has defined parameters and introduced new test methods in order to better determine the tendency to crack growth, critical conditions for rapid fracture development, material resistance to rapid crack propagation and better definition of other parameters for assessing the behaviour of the material and the safety of the structure in the presence of cracks. In this paper, the focus is on determination of the parameter of elastic-plastic mechanics of J-integral, more precisely, on examination of the critical value of J-integral (JIc) of the welded joint of HSLA steel. The position of the tip of the fatigue crack and the properties of the region where fracture propagation occurs are main indicators of influence of the heterogeneity of the NN-70 welded structure and mechanical properties. Resistance to cracking in the welded joint shows that the heterogeneity has a major impact on the resistance to crack initiation and propagation, in elastic as well as in the plastic region.",
publisher = "Strojarski Facultet",
journal = "Tehnicki Vjesnik",
title = "Experimental Determination of the Critical Value of the J-Integral that Refers to the HSLA Steel Welded Joint",
doi = "10.17559/TV-20220419093052"
}

Bulatović, S., Aleksić, V., Milović, L.,& Zečević, B.. (2023). Experimental Determination of the Critical Value of the J-Integral that Refers to the HSLA Steel Welded Joint. in Tehnicki Vjesnik
Strojarski Facultet..
https://doi.org/10.17559/TV-20220419093052

Bulatović S, Aleksić V, Milović L, Zečević B. Experimental Determination of the Critical Value of the J-Integral that Refers to the HSLA Steel Welded Joint. in Tehnicki Vjesnik. 2023;.
doi:10.17559/TV-20220419093052 .

Bulatović, Srđan, Aleksić, Vujadin, Milović, Ljubica, Zečević, Bojana, "Experimental Determination of the Critical Value of the J-Integral that Refers to the HSLA Steel Welded Joint" in Tehnicki Vjesnik (2023),
https://doi.org/10.17559/TV-20220419093052 . .

TY  - JOUR
AU  - Antić, Nevena
AU  - Kašanin-Grubin, Milica
AU  - Štrbac, Snežana
AU  - Xie, Chunxia
AU  - Mijatović, Nevenka
AU  - Tosti, Tomislav
AU  - Jovančićević, Branimir
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/658
AB  - A diversity of factors, led by lithology, weathering, and erosion processes, plays a significant role in the formation and future of badland terrains. Then on previous observations it can be concluded that surface flow processes are the first trigger of erosion and that intense soil erosion combined with rapid and deep weathering are tightly connected to high erosion rates.

Since climate change presents a global issue that gains increasing attention and due to the complexity of the interactions and processes that are a part of general badlands origin and evolution, a weathering experiment on badland sediments from China was conducted. Explaining temporal changes, the impact of different precipitation types and its durations of exposure on sediments during weathering processes, as well as its impact on leachate ions behaviour are the aims behind this experiment.

Red clayey siltstone and mudstone badland sediments selected for the laboratory experiment were organized in four sets that included three different samples, making a total of 12 treated samples. Based on field climate data, in laboratory conditions samples were exposed to rain, acid rain, snow, and acid snow through fifteen daily cycles. Leachate was collected after each cycle and its volume, pH, electrical conductivity (EC), and ion concentrations were measured and analysed from the leachate. Changes occurring on the surface of the sample were observed through photographs taken at the end of each cycle.
Based on obtained results it can be said that the main differences occur when comparing rain and snow treatments generally. Temporal, cyclic changes were, to a certain extent, noticed through sediment decay. More importantly, durations of sediment exposure to precipitation proved to be crucial for weathering processes of tested siltstones and mudstones, having exclusion and ionic forces - ion exchange chromatography as dominant chemical processes.
PB  - Elsevier
T2  - CATENA
T1  - Type of precipitation and durations of sediment exposure as important weathering factors
DO  - 10.1016/j.catena.2023.107192
ER  - 

@article{
author = "Antić, Nevena and Kašanin-Grubin, Milica and Štrbac, Snežana and Xie, Chunxia and Mijatović, Nevenka and Tosti, Tomislav and Jovančićević, Branimir",
year = "2023",
abstract = "A diversity of factors, led by lithology, weathering, and erosion processes, plays a significant role in the formation and future of badland terrains. Then on previous observations it can be concluded that surface flow processes are the first trigger of erosion and that intense soil erosion combined with rapid and deep weathering are tightly connected to high erosion rates.

Since climate change presents a global issue that gains increasing attention and due to the complexity of the interactions and processes that are a part of general badlands origin and evolution, a weathering experiment on badland sediments from China was conducted. Explaining temporal changes, the impact of different precipitation types and its durations of exposure on sediments during weathering processes, as well as its impact on leachate ions behaviour are the aims behind this experiment.

Red clayey siltstone and mudstone badland sediments selected for the laboratory experiment were organized in four sets that included three different samples, making a total of 12 treated samples. Based on field climate data, in laboratory conditions samples were exposed to rain, acid rain, snow, and acid snow through fifteen daily cycles. Leachate was collected after each cycle and its volume, pH, electrical conductivity (EC), and ion concentrations were measured and analysed from the leachate. Changes occurring on the surface of the sample were observed through photographs taken at the end of each cycle.
Based on obtained results it can be said that the main differences occur when comparing rain and snow treatments generally. Temporal, cyclic changes were, to a certain extent, noticed through sediment decay. More importantly, durations of sediment exposure to precipitation proved to be crucial for weathering processes of tested siltstones and mudstones, having exclusion and ionic forces - ion exchange chromatography as dominant chemical processes.",
publisher = "Elsevier",
journal = "CATENA",
title = "Type of precipitation and durations of sediment exposure as important weathering factors",
doi = "10.1016/j.catena.2023.107192"
}

Antić, N., Kašanin-Grubin, M., Štrbac, S., Xie, C., Mijatović, N., Tosti, T.,& Jovančićević, B.. (2023). Type of precipitation and durations of sediment exposure as important weathering factors. in CATENA
Elsevier..
https://doi.org/10.1016/j.catena.2023.107192

Antić N, Kašanin-Grubin M, Štrbac S, Xie C, Mijatović N, Tosti T, Jovančićević B. Type of precipitation and durations of sediment exposure as important weathering factors. in CATENA. 2023;.
doi:10.1016/j.catena.2023.107192 .

Antić, Nevena, Kašanin-Grubin, Milica, Štrbac, Snežana, Xie, Chunxia, Mijatović, Nevenka, Tosti, Tomislav, Jovančićević, Branimir, "Type of precipitation and durations of sediment exposure as important weathering factors" in CATENA (2023),
https://doi.org/10.1016/j.catena.2023.107192 . .

TY  - JOUR
AU  - Štrbac, Snežana
AU  - Veselinović, Gorica
AU  - Antić, Nevena
AU  - Mijatović, Nevenka
AU  - Stojadinović, Sanja
AU  - Jovančićević, Branimir
AU  - Kašanin-Grubin, Milica
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/655
AB  - The main objective of this study was to analyze the capacity of Cedrus atlantica (Endl.) Manetti ex Carrière 1855 to accumulate macro- and microelements in order to assess the environmental status. The element concentrations were measured using X-ray Fluorescence (XRF) analysis. The obtained pH values in this study show that the urban soils are neutral to slightly alkaline with low OM content. Macroelements with the highest mean concentrations in soil are Si, Al, Fe, K, Mg, and Ca. The ratio > 2 was determined for mean concentrations of Ca in the soil and Mg in needles from the Zvezdara forest, and for mean concentrations of Cl, Ti, and Fe in needles from the Byford’s forest in relation to the reference site. The accumulation pattern of the macroelements based on the Biological Concentration Factor (BCF) values > 1 for needles is for P, S, Cl, and Ca. Microelements with the highest mean values in soil are Ba, Zr, Ce, Cr, Zn, Rb, Sr, V, and La. Microelements with the highest mean values in Atlas cedar needles are Ce, La, Ba, and Cs. The ratio > 2 was determined for Cr and V concentrations in the needles from the Byford’s and Zvezdara forests and for Cu concentrations in needles from the Byford’s forest in relation to the reference site. The accumulation pattern of the microelements based on the BCF for needles is higher for I, Cs, Mo, Ag, Cd, In, Sn, Sb, and Tl. Since differences in the concentrations of macro- and microelements in the urban areas and the reference site can be identified C. atlantica can be recommended for assessing the environmental status.
PB  - Springer
T2  - Trees
T1  - The macro- and microelements content in Cedrus atlantica (Endl.) Manetti ex Carrière (Pinaceae) needles as an indicator for assessing the environmental status
DO  - 10.1007/s00468-023-02401-9
ER  - 

@article{
author = "Štrbac, Snežana and Veselinović, Gorica and Antić, Nevena and Mijatović, Nevenka and Stojadinović, Sanja and Jovančićević, Branimir and Kašanin-Grubin, Milica",
year = "2023",
abstract = "The main objective of this study was to analyze the capacity of Cedrus atlantica (Endl.) Manetti ex Carrière 1855 to accumulate macro- and microelements in order to assess the environmental status. The element concentrations were measured using X-ray Fluorescence (XRF) analysis. The obtained pH values in this study show that the urban soils are neutral to slightly alkaline with low OM content. Macroelements with the highest mean concentrations in soil are Si, Al, Fe, K, Mg, and Ca. The ratio > 2 was determined for mean concentrations of Ca in the soil and Mg in needles from the Zvezdara forest, and for mean concentrations of Cl, Ti, and Fe in needles from the Byford’s forest in relation to the reference site. The accumulation pattern of the macroelements based on the Biological Concentration Factor (BCF) values > 1 for needles is for P, S, Cl, and Ca. Microelements with the highest mean values in soil are Ba, Zr, Ce, Cr, Zn, Rb, Sr, V, and La. Microelements with the highest mean values in Atlas cedar needles are Ce, La, Ba, and Cs. The ratio > 2 was determined for Cr and V concentrations in the needles from the Byford’s and Zvezdara forests and for Cu concentrations in needles from the Byford’s forest in relation to the reference site. The accumulation pattern of the microelements based on the BCF for needles is higher for I, Cs, Mo, Ag, Cd, In, Sn, Sb, and Tl. Since differences in the concentrations of macro- and microelements in the urban areas and the reference site can be identified C. atlantica can be recommended for assessing the environmental status.",
publisher = "Springer",
journal = "Trees",
title = "The macro- and microelements content in Cedrus atlantica (Endl.) Manetti ex Carrière (Pinaceae) needles as an indicator for assessing the environmental status",
doi = "10.1007/s00468-023-02401-9"
}

Štrbac, S., Veselinović, G., Antić, N., Mijatović, N., Stojadinović, S., Jovančićević, B.,& Kašanin-Grubin, M.. (2023). The macro- and microelements content in Cedrus atlantica (Endl.) Manetti ex Carrière (Pinaceae) needles as an indicator for assessing the environmental status. in Trees
Springer..
https://doi.org/10.1007/s00468-023-02401-9

Štrbac S, Veselinović G, Antić N, Mijatović N, Stojadinović S, Jovančićević B, Kašanin-Grubin M. The macro- and microelements content in Cedrus atlantica (Endl.) Manetti ex Carrière (Pinaceae) needles as an indicator for assessing the environmental status. in Trees. 2023;.
doi:10.1007/s00468-023-02401-9 .

Štrbac, Snežana, Veselinović, Gorica, Antić, Nevena, Mijatović, Nevenka, Stojadinović, Sanja, Jovančićević, Branimir, Kašanin-Grubin, Milica, "The macro- and microelements content in Cedrus atlantica (Endl.) Manetti ex Carrière (Pinaceae) needles as an indicator for assessing the environmental status" in Trees (2023),
https://doi.org/10.1007/s00468-023-02401-9 . .

TY  - JOUR
AU  - Zečević, Bojana
AU  - Maksimović, Ana
AU  - Milović, Ljubica
AU  - Aleksić, Vujadin
AU  - Bulatović, Srđan
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/654
AB  - The influence of temperature on the fatigue crack growth parameter, was analyzed by testing chromium-molybdenum steel of the new generation additionally alloyed with vanadium, designed for high temperatures application. The paper presents a comparison of the fatigue threshold value ΔKth and the fatigue crack growth rate da/dN of the specimens taken from the pipe made of virgin steel, tested at room (RT) and operating (HT) temperatures of 540 °C. The influence of the location of the notch and crack initiation, as well as the test temperature, have a decisive effect on the fatigue threshold values ΔKth of the chromium-molybdenum alloyed steel of the new generation additionally alloyed with vanadium for high temperatures application.
PB  - Elsevier B.V.
T2  - Procedia Structural Integrity
T1  - Fatigue crack growth rate of a low carbon microalloyed steel for high temperatures
EP  - 301
SP  - 296
VL  - 48
DO  - 10.1016/j.prostr.2023.07.129
ER  - 

@article{
author = "Zečević, Bojana and Maksimović, Ana and Milović, Ljubica and Aleksić, Vujadin and Bulatović, Srđan",
year = "2023",
abstract = "The influence of temperature on the fatigue crack growth parameter, was analyzed by testing chromium-molybdenum steel of the new generation additionally alloyed with vanadium, designed for high temperatures application. The paper presents a comparison of the fatigue threshold value ΔKth and the fatigue crack growth rate da/dN of the specimens taken from the pipe made of virgin steel, tested at room (RT) and operating (HT) temperatures of 540 °C. The influence of the location of the notch and crack initiation, as well as the test temperature, have a decisive effect on the fatigue threshold values ΔKth of the chromium-molybdenum alloyed steel of the new generation additionally alloyed with vanadium for high temperatures application.",
publisher = "Elsevier B.V.",
journal = "Procedia Structural Integrity",
title = "Fatigue crack growth rate of a low carbon microalloyed steel for high temperatures",
pages = "301-296",
volume = "48",
doi = "10.1016/j.prostr.2023.07.129"
}

Zečević, B., Maksimović, A., Milović, L., Aleksić, V.,& Bulatović, S.. (2023). Fatigue crack growth rate of a low carbon microalloyed steel for high temperatures. in Procedia Structural Integrity
Elsevier B.V.., 48, 296-301.
https://doi.org/10.1016/j.prostr.2023.07.129

Zečević B, Maksimović A, Milović L, Aleksić V, Bulatović S. Fatigue crack growth rate of a low carbon microalloyed steel for high temperatures. in Procedia Structural Integrity. 2023;48:296-301.
doi:10.1016/j.prostr.2023.07.129 .

Zečević, Bojana, Maksimović, Ana, Milović, Ljubica, Aleksić, Vujadin, Bulatović, Srđan, "Fatigue crack growth rate of a low carbon microalloyed steel for high temperatures" in Procedia Structural Integrity, 48 (2023):296-301,
https://doi.org/10.1016/j.prostr.2023.07.129 . .

TY  - JOUR
AU  - Veselinović, Gorica
AU  - Štrbac, Snežana
AU  - Antić, Nevena
AU  - Ferreira, Carla
AU  - Dinca, Lucian
AU  - Mijatović, Nevenka
AU  - Kašanin-Grubin, Milica
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/653
AB  - The quality and vitality of cities largely depend on the design, management, and maintenance of green areas, including urban protected areas (UPAs), since they provide multiple benefits for the city. Due to urbanization and higher anthropogenic pressure, green areas are decreasing which directly affects natural habitats and biodiversity. This study aims to assess soil and vegetation chemical status in UPAs in the city of Belgrade, Serbia, and to understand how their distance from pollution hotspots affects soil and vegetation quality. Additionally, this paper considers the inclusion of soil and vegetation conditions in the urban protected areas management as a basis for introducing a connectivity approach to expand green infrastructure throughout the city. Chemical properties, the content of nutrients (C, N, P, and K), and microelements (Cr, Co, Ni, Cu, Zn, As, Cd, Sn, Pb, Zr, U, and Th) in soil and conifer needles were analyzed. Results showed that the distance of pollution hotspots does not affect nutrient and microelements concentrations in soil, i.e., they do not vary significantly between sites and do not exceed remediation intervention values. However, the microelements status of vegetation is affected since Cr, Cu, Zn, Sn, and Pb are higher in needles from trees from the city center. The state of soil and plant composition supports the establishment of a network of green corridors and should become a part of management strategies, thus helping biodiversity protection, climate change mitigation, and human well-being in the cities.
PB  - Springer
T2  - Environmental Geochemistry & Health
T1  - Connectivity approach in urban protected area management based on soil and vegetation chemical status
DO  - 10.1007/s10653-023-01553-4
ER  - 

@article{
author = "Veselinović, Gorica and Štrbac, Snežana and Antić, Nevena and Ferreira, Carla and Dinca, Lucian and Mijatović, Nevenka and Kašanin-Grubin, Milica",
year = "2023",
abstract = "The quality and vitality of cities largely depend on the design, management, and maintenance of green areas, including urban protected areas (UPAs), since they provide multiple benefits for the city. Due to urbanization and higher anthropogenic pressure, green areas are decreasing which directly affects natural habitats and biodiversity. This study aims to assess soil and vegetation chemical status in UPAs in the city of Belgrade, Serbia, and to understand how their distance from pollution hotspots affects soil and vegetation quality. Additionally, this paper considers the inclusion of soil and vegetation conditions in the urban protected areas management as a basis for introducing a connectivity approach to expand green infrastructure throughout the city. Chemical properties, the content of nutrients (C, N, P, and K), and microelements (Cr, Co, Ni, Cu, Zn, As, Cd, Sn, Pb, Zr, U, and Th) in soil and conifer needles were analyzed. Results showed that the distance of pollution hotspots does not affect nutrient and microelements concentrations in soil, i.e., they do not vary significantly between sites and do not exceed remediation intervention values. However, the microelements status of vegetation is affected since Cr, Cu, Zn, Sn, and Pb are higher in needles from trees from the city center. The state of soil and plant composition supports the establishment of a network of green corridors and should become a part of management strategies, thus helping biodiversity protection, climate change mitigation, and human well-being in the cities.",
publisher = "Springer",
journal = "Environmental Geochemistry & Health",
title = "Connectivity approach in urban protected area management based on soil and vegetation chemical status",
doi = "10.1007/s10653-023-01553-4"
}

Veselinović, G., Štrbac, S., Antić, N., Ferreira, C., Dinca, L., Mijatović, N.,& Kašanin-Grubin, M.. (2023). Connectivity approach in urban protected area management based on soil and vegetation chemical status. in Environmental Geochemistry & Health
Springer..
https://doi.org/10.1007/s10653-023-01553-4

Veselinović G, Štrbac S, Antić N, Ferreira C, Dinca L, Mijatović N, Kašanin-Grubin M. Connectivity approach in urban protected area management based on soil and vegetation chemical status. in Environmental Geochemistry & Health. 2023;.
doi:10.1007/s10653-023-01553-4 .

Veselinović, Gorica, Štrbac, Snežana, Antić, Nevena, Ferreira, Carla, Dinca, Lucian, Mijatović, Nevenka, Kašanin-Grubin, Milica, "Connectivity approach in urban protected area management based on soil and vegetation chemical status" in Environmental Geochemistry & Health (2023),
https://doi.org/10.1007/s10653-023-01553-4 . .

TY  - CONF
AU  - Janković, Ksenija
AU  - Stojanović, Marko
AU  - Bojović, Dragan
AU  - Terzić, Anja
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/651
AB  - This study compared the performance of self-compacting concrete (SCC) based on fly ash addition and limestone filler. A SCC prepared with Portland cement, river sand, and limestone filler was used as a reference sample. Additional experimental self-compacting concretes with different types of fine aggregates, fillers, and special additives for increasing freeze-thaw resistance were prepared and optimized. The correlation between mix design, i.e., percentage of barite sand and additives, and properties of fresh SCC (slump-flow test, V-funnel test, and L-box test), as well as properties of hardened SCC (compressive strengths), were investigated and discussed.
C3  - International RILEM Conference on Synergising Expertise towards Sustainability and Robustness of Cement-based Materials and Concrete Structures
T1  - Influence of Aggregate Type on the Properties on SCC with Fly Ash
DO  - 10.1007/978-3-031-33187-9_5
ER  - 

@conference{
author = "Janković, Ksenija and Stojanović, Marko and Bojović, Dragan and Terzić, Anja",
year = "2023",
abstract = "This study compared the performance of self-compacting concrete (SCC) based on fly ash addition and limestone filler. A SCC prepared with Portland cement, river sand, and limestone filler was used as a reference sample. Additional experimental self-compacting concretes with different types of fine aggregates, fillers, and special additives for increasing freeze-thaw resistance were prepared and optimized. The correlation between mix design, i.e., percentage of barite sand and additives, and properties of fresh SCC (slump-flow test, V-funnel test, and L-box test), as well as properties of hardened SCC (compressive strengths), were investigated and discussed.",
journal = "International RILEM Conference on Synergising Expertise towards Sustainability and Robustness of Cement-based Materials and Concrete Structures",
title = "Influence of Aggregate Type on the Properties on SCC with Fly Ash",
doi = "10.1007/978-3-031-33187-9_5"
}

Janković, K., Stojanović, M., Bojović, D.,& Terzić, A.. (2023). Influence of Aggregate Type on the Properties on SCC with Fly Ash. in International RILEM Conference on Synergising Expertise towards Sustainability and Robustness of Cement-based Materials and Concrete Structures.
https://doi.org/10.1007/978-3-031-33187-9_5

Janković K, Stojanović M, Bojović D, Terzić A. Influence of Aggregate Type on the Properties on SCC with Fly Ash. in International RILEM Conference on Synergising Expertise towards Sustainability and Robustness of Cement-based Materials and Concrete Structures. 2023;.
doi:10.1007/978-3-031-33187-9_5 .

Janković, Ksenija, Stojanović, Marko, Bojović, Dragan, Terzić, Anja, "Influence of Aggregate Type on the Properties on SCC with Fly Ash" in International RILEM Conference on Synergising Expertise towards Sustainability and Robustness of Cement-based Materials and Concrete Structures (2023),
https://doi.org/10.1007/978-3-031-33187-9_5 . .

TY  - CONF
AU  - Folić, Boris
AU  - Čokić, Miloš
AU  - Ćosić, Mladen
AU  - Sedmak, Simon
AU  - Žugić, Željko
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/617
AB  - During earthquakes that exceed the designed level of the structure, the structure gets damaged. Here, the structure-foundation-soil is considered as a system, and the effect of the soil on the piles can be replaced by nonlinear p-y curves. Work on this topic began as early as 1957, based on the analogy between the triaxial test and the form of soil failure, and during the 1970’s, a number of researchers made significant progress in the development of appropriate models for different types of soil. Eurocode 8 pays special attention to the selection of earthquakes as a set of accelerograms. For areas within a radius of several hundred kilometers from central Romania and its southern part, the Vrancea hypocenter has a significant influence. In North Serbia and its surroundings, other sources of earthquakes are also possible, but when choosing accelerogram, the response spectra of several Vrancea records should also be used. The SSI model itself, where the soil is replaced by p-y curves, even though it might look complicated, it is significantly simpler and leads to faster results than integral 3D models. By using adequate soil parameters, fairly reliable data can be obtained on the degree and distribution of damage to the SSI system, like plastic hinges. In soil models used for clean sand, the curves used seem significantly more reliable than clayey ones, but here too caution is needed because the degree of compaction (relative density) has a significant effect, and the way of determining it is still not reliable.
PB  - University of Belgrade - Faculty of Mechanical Engineering
C3  - International Conference of Experimental and Numerical Investigations and New Technologies, Zlatibor, Serbia-Proceedings
T1  - The Influence of Parameters of Sand Soil on States PH 2D Frame on Seismic Response
SP  - 9
UR  - https://hdl.handle.net/21.15107/rcub_rims_617
ER  - 

@conference{
author = "Folić, Boris and Čokić, Miloš and Ćosić, Mladen and Sedmak, Simon and Žugić, Željko",
year = "2023",
abstract = "During earthquakes that exceed the designed level of the structure, the structure gets damaged. Here, the structure-foundation-soil is considered as a system, and the effect of the soil on the piles can be replaced by nonlinear p-y curves. Work on this topic began as early as 1957, based on the analogy between the triaxial test and the form of soil failure, and during the 1970’s, a number of researchers made significant progress in the development of appropriate models for different types of soil. Eurocode 8 pays special attention to the selection of earthquakes as a set of accelerograms. For areas within a radius of several hundred kilometers from central Romania and its southern part, the Vrancea hypocenter has a significant influence. In North Serbia and its surroundings, other sources of earthquakes are also possible, but when choosing accelerogram, the response spectra of several Vrancea records should also be used. The SSI model itself, where the soil is replaced by p-y curves, even though it might look complicated, it is significantly simpler and leads to faster results than integral 3D models. By using adequate soil parameters, fairly reliable data can be obtained on the degree and distribution of damage to the SSI system, like plastic hinges. In soil models used for clean sand, the curves used seem significantly more reliable than clayey ones, but here too caution is needed because the degree of compaction (relative density) has a significant effect, and the way of determining it is still not reliable.",
publisher = "University of Belgrade - Faculty of Mechanical Engineering",
journal = "International Conference of Experimental and Numerical Investigations and New Technologies, Zlatibor, Serbia-Proceedings",
title = "The Influence of Parameters of Sand Soil on States PH 2D Frame on Seismic Response",
pages = "9",
url = "https://hdl.handle.net/21.15107/rcub_rims_617"
}

Folić, B., Čokić, M., Ćosić, M., Sedmak, S.,& Žugić, Ž.. (2023). The Influence of Parameters of Sand Soil on States PH 2D Frame on Seismic Response. in International Conference of Experimental and Numerical Investigations and New Technologies, Zlatibor, Serbia-Proceedings
University of Belgrade - Faculty of Mechanical Engineering., 9.
https://hdl.handle.net/21.15107/rcub_rims_617

Folić B, Čokić M, Ćosić M, Sedmak S, Žugić Ž. The Influence of Parameters of Sand Soil on States PH 2D Frame on Seismic Response. in International Conference of Experimental and Numerical Investigations and New Technologies, Zlatibor, Serbia-Proceedings. 2023;:9.
https://hdl.handle.net/21.15107/rcub_rims_617 .

Folić, Boris, Čokić, Miloš, Ćosić, Mladen, Sedmak, Simon, Žugić, Željko, "The Influence of Parameters of Sand Soil on States PH 2D Frame on Seismic Response" in International Conference of Experimental and Numerical Investigations and New Technologies, Zlatibor, Serbia-Proceedings (2023):9,
https://hdl.handle.net/21.15107/rcub_rims_617 .

TY  - JOUR
AU  - Ćosić, Mladen
AU  - Šušić, Nenad
AU  - Prica, Marko
AU  - Đoković, Ksenija
PY  - 2023
UR  - http://rims.institutims.rs/handle/123456789/493
AB  - The paper shows the comparative analysis of behavior and bearing capacity of piles examined using the Dynamic Load Test (DLT) according to Static Load Test (SLT) results. The pile testing methodology is based on the existing ASTM standards and experiences of the authors of the paper. The pile tests were carried out using counterweights, reactive system, dynamic testing equipment, hardware and software for SLT and DLT. The data obtained by testing were statis-tically processed, and also a regression analysis of the linear function was conducted, resulting in the creation of the model for the change of mobilized static bearing capacity from DLT according to SLT. In addition, a procedure for correcting the solution of mobilized static bearing capacity from DLT according to SLT, is made by observing provisions of standard EN 1997-1:2004, so the average deviation of solutions from DLT according to SLT is reduced. Apart from that, through iterations, the value of correlation factor ξ5 is determined, taking into consideration solutions presented by SLT and DLT of piles of the real structures.
T2  - Structural Integrity and Life, Special Issue
T1  - Procedure for correction of bearing capacity of piles examined by the Dynamic Load Test (DLT) according to the Static Load Test (SLT)
EP  - 68
SP  - 53
VL  - 23
UR  - https://hdl.handle.net/21.15107/rcub_rims_493
ER  - 

@article{
author = "Ćosić, Mladen and Šušić, Nenad and Prica, Marko and Đoković, Ksenija",
year = "2023",
abstract = "The paper shows the comparative analysis of behavior and bearing capacity of piles examined using the Dynamic Load Test (DLT) according to Static Load Test (SLT) results. The pile testing methodology is based on the existing ASTM standards and experiences of the authors of the paper. The pile tests were carried out using counterweights, reactive system, dynamic testing equipment, hardware and software for SLT and DLT. The data obtained by testing were statis-tically processed, and also a regression analysis of the linear function was conducted, resulting in the creation of the model for the change of mobilized static bearing capacity from DLT according to SLT. In addition, a procedure for correcting the solution of mobilized static bearing capacity from DLT according to SLT, is made by observing provisions of standard EN 1997-1:2004, so the average deviation of solutions from DLT according to SLT is reduced. Apart from that, through iterations, the value of correlation factor ξ5 is determined, taking into consideration solutions presented by SLT and DLT of piles of the real structures.",
journal = "Structural Integrity and Life, Special Issue",
title = "Procedure for correction of bearing capacity of piles examined by the Dynamic Load Test (DLT) according to the Static Load Test (SLT)",
pages = "68-53",
volume = "23",
url = "https://hdl.handle.net/21.15107/rcub_rims_493"
}

Ćosić, M., Šušić, N., Prica, M.,& Đoković, K.. (2023). Procedure for correction of bearing capacity of piles examined by the Dynamic Load Test (DLT) according to the Static Load Test (SLT). in Structural Integrity and Life, Special Issue, 23, 53-68.
https://hdl.handle.net/21.15107/rcub_rims_493

Ćosić M, Šušić N, Prica M, Đoković K. Procedure for correction of bearing capacity of piles examined by the Dynamic Load Test (DLT) according to the Static Load Test (SLT). in Structural Integrity and Life, Special Issue. 2023;23:53-68.
https://hdl.handle.net/21.15107/rcub_rims_493 .

Ćosić, Mladen, Šušić, Nenad, Prica, Marko, Đoković, Ksenija, "Procedure for correction of bearing capacity of piles examined by the Dynamic Load Test (DLT) according to the Static Load Test (SLT)" in Structural Integrity and Life, Special Issue, 23 (2023):53-68,
https://hdl.handle.net/21.15107/rcub_rims_493 .