Pretraživanje
Prikaz rezultata 21-30 od 112
Theory of critical distances in analysis of the influence of tooth profile on gears bending capacity
(5th International Conference on Power Transmission BAPT2016, 2016)
The fatigue cracks and failures in tooth roots are still one of the most common problems in gear pairs operation.
Therefore, the application of new methods and up-to-date calculation procedures is welcome. This paper ...
Establishing the model for predicting the moisture and velocity in the critical point during drying of green masonry products
(Programme and book of abstracts, The Serbian Ceramic Society Conference “Advanced Ceramics and Application II”, Belgrade, 2013)
The aim of this study was to establish the model for predicting the moisture and velocity in the critical point during drying of green masonry products. The raw material was first dried at a temperature of 60°C, and then ...
Changing the structure of concrete after exposure to frost
(Faculty Of Civil Engineering Subotica, 2014)
Concrete testing can be done at micro, mezzo and macro level. Tests at the macro level are the most common and are the ultimate engineering approach, and include testing and comparison of quantities such as commpresive ...
Review of scientific insights and a critical analysis of pile capacity and pile integrity tests
(International Conference on Civil Engineering Design and Construction (Science and Practice), Bulgaria, Proceedings, 2016)
Modern geotechnical engineering is based on a multidisciplinary approach to solving complex
geotechnical problems through engineering-geological soil testing, laboratory analyses of physical
and mechanical soil properties, ...
Assessing soil dispersitivity based on classification tests
(Zbornik radova - Peto naučno-stručno međunarodno savetovanje Geotehnički aspekti građevinarstva, Sokobanja=Fifth International Conference Geotechnics in Civil Engineering, 2013)
Pushover Analysis of MDOF System with SSI Effects and According to FEMA 440
(3rd Symposium for Geotechnics, Macedonian Associations for Geotechnics, Ohrid, Macedonia, Proceedings, 2010)
This paper discusses the analysis of soil-structure interaction using Displacement Modification Method, which was developed within the concept of FEMA 440 regulations. This method belongs to a group of static seismic ...
Anvelopa ciljnih pomeranja okvirnih sistema u interakciji sa tlom za uslove seizmičkog dejstva
(Zbornik-TEIK 2010, Teorijska i eksprimentalna istraživanja konstrukcija i njihova primena u građevinarstvu, I nacionalni simpozijum sa međunarodnim učešćem, Niš, Srbija, 2010)
Primenjujući metodu modifikacije pomeranja (displacement modification method)
prema FEMA 440 razmatrani su efekti interakcije konstrukcija-tlo (soil-structure
interaction) za višespratne okvirne sisteme. Za procenu uticaja ...
O potrebnom broju i veličini inkremenata u inkrementalnoj nelinearnoj dinamičkoj analizi
(Zbornik radova-GNP 2010, Gradjevinarstvo - nauka i praksa, Međunarodna konferencija, Žabljak, Crna Gora, 2010)
U ovom radu prikazan je postupak kojim se utvrðuje potreban broj inkremenata u
inkrementalnoj nelinearnoj dinamickoj analizi višespratnih zgrada okvirnih sistema.
Postupak se zasniva na primeni razvijene pushover krive ...
Numerički proračun karakteristika betona za atenuaciju jonizujućeg zračenja
(ZBORNIK RADOVA 7. MEĐUNARODNE KONFERENCIJE SAVREMENA DOSTIGNUĆA U GRAĐEVINARSTVU, 2019)
U ovom radu se prikazuje metod numeričkog proračuna totalnog masenog atenuacionog koeficijenta kao jednog od osnovnih radijacionih karakteristika materijala od kojih se proizvode betoni za specijalnu namenu. Primenom ...
Advanced Optimization of Heavy Clay Products Quality by Using Artificial Neural Network Mode
(Belgrade : Serbian Ceramic Society, 2014)
The effects of firing temperature (800–1100°C), chemical composition (expressed in terms of
the content of major oxides - SiO2, Al2O3, Fe2O3, CaO, MgO, Na2O, K2O, MnO and
TiO2), as well as several shape formats of ...