Претраживање
Приказ резултата 251-260 од 277
SolidWorks used for the process of optimization of supporting structure of a pressure vessel
(International Scientific Journal Machines. Technologies. Materials, 2011)
Bucket-wheel excavator gearbox failure analysis and reliability assessment
(Institute for Engineering Design and Product Development-ViennaFaculty of Mechanical Engineering University of Belgrade, 2019)
This paper presents the analysis of failure causes and reliability
assessment executed for the gearbox of the bucket-wheel excavator SRs
470.20/3 “TAKRAF” (produced by “Lauhhammer”, Germany), which is
engaged in overburden ...
Mechanical properties of welded pipes produced by high frequency welding of the steel API J55
(University of Banja Luka, Faculty of Mechanical Engineering, Banja Luka, Republika Srpska, 2019)
Selection of steel, dimensions and methods of production of welded pipes is
a segment of the design process, because it is closely related to the function of a piping
as a structural whole under predetermined conditions ...
The Development of Controlled Damage Mechanisms-Based Design Method for Nonlinear Static Pushover Analysis
(Facta Universitatis, Series: Architecture and Civil Engineering, 2014)
This paper presents the original method of controlled building damage mechanisms based on Nonlinear Static Pushover Analysis (NSPA-DMBD). The optimal building damage mechanism is determined based on the solution of the ...
Vulnerability of Damaged Structures: The Concept of the Scenario of Related Non-Linear Analyses
(Varna Free University “Chernorizets Hrabar”, Varna, Bulgaria, 2014)
The research presented in the paper employed the general approach in the analysis of robustness of reinforced concrete skeletal (frame) structures in the events of severe damage caused by strong earthquakes. Such damage ...
Analysis of the steam line damages
(Mašinski Fakultet Banja Luka, Republika Srpska, 2015)
The methodological approach to the analysis of damage to determine the
cause of failure and to repair the damage has been shown using the example of leakage
and damage of a steam line for live-steam in thermal power ...
Determination of polynomial depending between hardness and cooling time t8/5 of steel NIONICRAL 70 heat affected zone
(18th International Conference on New Trends in Fatigue and Fracture NT2F18, 2018)
Because of the high heating and cooling velocity values, welding procedure is an unstable process. During
welding, changes in microstructure are occurring under overheating and/or cooling conditions. In comparing to ...
Behaviour of 9% Cr steel and simulated HAZ at 600°C
(FRACT3, Chlef, Algeria, 2016)
Analiza mehanizama loma zgrada razmatranjem statičke neodređenosti i kinematičke stabilnosti
(Časopis Izgradnja, 2014)
U radu je prikazan koncept analize mehanizama loma zgrada bazirajući se na osnovnim stavovima iz statike konstrukcija, razmatrajući statičku neodređenost i kinematičku stabilnost. Istraživanje je sprovedeno modelirajući ...