Pretraživanje
Prikaz rezultata 111-120 od 120
Welded Joints Integrity of the Pressure Vessels Pipes Made of Hot Rolled Fine-Grained Steel
(Savez energetičara, 2021)
This paper contains results of tests performed in order
to determine mechanical properties of steel P460NL1, meant for
production of pressure vessels. Arc welding of samples from
which the specimens were taken was carried ...
Effect of temperature and specimen orientation on Charpy impact toughness
(Elsevier, 2022)
Steel grade 14MoV6 3 is used for manufacturing of boilers and steam pipelines designed for steam temperatures up to 560°C. This paper presents the experimental analysis which included impact toughness test. The analysis ...
Lamellar Tearing of Parent Material and Degradation of Welded Joints at Vital Welded Structures
(Savez energetičara, 2021)
Vertical Kaplan turbines, manufactured in Russia, are
installed in 6 hydroelectric generating units at ‘Djerdap 1’, with
nominal power of 176 MW each. Because of the structural
solution and inability of performing ...
Modeling of Damping Effects in Soil – Structure Interaction in the Pushover Analysis
(1st Croatian Conference on Earthquake Engineering, Zagreb, Croatia, 2021)
The paper shows aspects of damping modelling in nonlinear static pushover analysis (NSPA) of structures through systematization of damping types and formed flow diagram, depending on the type of applied target displacement ...
Some Aspects of Pile Testing Using Static Load Test (SLT)
(Savez građevinskih inženjera Srbije SGIS, 2021)
The paper presents typical examples of pile load tests with a specific analysis of results, whereby the test methodology relies on existing ASTM standards, own knowledge and experience. The pile tests were conducted using ...
Static-Dynamic Tests of Bearing Capacity of Wind Turbine Piles
(Comptes rendus de l’Académie bulgare des Sciences, 2022)
The paper presents the static load tests (SLT) and dynamic load tests (DLT) of the piles and numerical analyses of piles in interaction with the soil of wind turbines. Pile tests were conducted using the equipment with ...
3D Modeling in the Function of Cavitation Demage Testing at Hydropower Plants
(Savez energetičara, 2021)
Strength of the Welded Joint with Improved Mechanical Properties of Weld Metal and Heat Affected Zone
(Faculty of Mechanical and Civil Engineering in Kraljevo, Serbia, 2021)
Selection of steel, dimensions and fabrication technology for the welded structure are all parts of the design
process, because they are in close connection with the function of the structural whole under certain conditions ...
Use of iron ore tailings for production of concrete paving blocks
(Faculty Of Civil Engineering, University of Montenegro, 2020)
The possibility of using tailings from the iron mine (IOT) in the production of concrete elements for the pedestrian areas is shown in this paper. To determine the impact of the amount of tailings on the compressive strength ...
Review of research and business results of the IMS Institute - in 2022
(Beograd : Institut za ispitivanje materijala, 2022)