Претраживање
Приказ резултата 31-40 од 51
Uporedna analiza proračuna mašinskih elemenata simuliranjem kombinovanog opterećenja i odvojenim simuliranjem komponentnih opterećenja - studija slučaja / Combined load simulation vs component loads simulation in machine design: A case study
(Univerzitet u Beogradu - Mašinski fakultet, Beograd, 2014)
Na sadašnjem nivou razvoja tehnologije, u stvarnim radnim uslovima, gotovo svi mašinski elementi su opterećeni kombinovanim opterećenjima. Cilj istraživanja prikazanog u ovom radu je ukazivanje na značaj proračuna nosivosti ...
Characterisation of collapsing loess by seismic dilatometer
(Elsevier, Amsterdam, 2014)
Structural collapse and sudden volume changes represent a major geotechnical issue, particularly in loess soils. There are different criteria for assessing collapse potential based on laboratory test results, which require ...
The effects of chemical composition and firing temperature in heavy clay brick production - Chemometric approach
(Expert Fachmedien GmbH, 2014)
Factors influencing final clay brick properties are numerous, since the raw materials are highly heterogeneous. The chemometric approach is rarely used in analysis in this field, although it could significantly improve ...
Phytoremediation of agricultural land contaminated with pesticides
(International Conference "Ecological improvement of devastated locations for sustainable development", Conference Proceedings, 2014)
Pesticides are substances intended for preventing, destroying, suppressing or reducing pests.
They are in use for more than 60 years and they are divided according to purpose, chemical
composition and toxicity category. ...
Analysis of Moisture Transfer During the Drying of Clay Tiles with Particular Reference to an Estimation of the Time-Dependent Effective Diffusivity
(Taylor & Francis Inc, Philadelphia, 2014)
The description of the drying process was reduced to the establishment of a series of theoretical and empirical drying models. The complex processes of simultaneous moisture and heat transfer, which are often nonstationary, ...
Changing the structure of concrete after exposure to frost
(Faculty Of Civil Engineering Subotica, 2014)
Concrete testing can be done at micro, mezzo and macro level. Tests at the macro level are the most common and are the ultimate engineering approach, and include testing and comparison of quantities such as commpresive ...
Performance-Based Seismic Analysis of Highway E75 Overpass at Kovilj
(Beograd : Društvo za integritet i vek konstrukcijaSmederevska Palanka : Goša Institut, 2014)
Presented in this paper are the results of the analysis of seismic performances of an overpass founded on piles, in interaction with the soil, located over the E75 Highway Novi Sad - Belgrade, as part of the Kovilj loop. ...
Towards sustainable solutions for fly ash reapplication through mechanical activation
(9th Symposium “Recycling Technologies and Sustainable Development” with international participation, Proceedings, 2014)
The aim of investigation was to find sustainable solution for coal fly ash reapplication by increasing its reactivity through mechano-activation. For obtaining complete insight into activation process an understanding of ...
Advanced Optimization of Heavy Clay Products Quality by Using Artificial Neural Network Mode
(Belgrade : Serbian Ceramic Society, 2014)
The effects of firing temperature (800–1100°C), chemical composition (expressed in terms of
the content of major oxides - SiO2, Al2O3, Fe2O3, CaO, MgO, Na2O, K2O, MnO and
TiO2), as well as several shape formats of ...
NDT and RBI in function of pressure equipment integrity loss
(Univerzitet u Novom Sadu, Građevinski fakultet Subotica, Srbija, 2014)