Претраживање
Приказ резултата 11-20 од 42
Procedures for preventing corrosion of welded joints
(SERBIAN SOCIETY OF CORROSION AND MATERIALS PROTECTION (UISKOZAM), 2023)
This paper describes the procedures for preventing corrosion of welded joints. Also, a theoretical
overview of the forms of corrosion that are most prevalent in welded joints is presented.
The concept of corrosion in ...
Fatigue crack growth rate of a low carbon microalloyed steel for high temperatures
(Elsevier B.V., 2023)
The influence of temperature on the fatigue crack growth parameter, was analyzed by testing chromium-molybdenum steel of the new generation additionally alloyed with vanadium, designed for high temperatures application. ...
Procedure for assessment of the clays suitability towards fast drying
(International Journal of Modern Manufacturing Technologies, 2023)
During the last 10 years it was shown that Deff – MR curve pattern is unique and very useful. This ability was firstly embedded in the procedure for setting up the fast drying regimes several years ago. This incredible ...
Optimal numerical model of a non-stationary heat transfer through a wall
(INTERNATIONAL SCIENTIFIC CONFERENCE PLANNING, DESIGN, CONSTRUCTION AND BUILDING RENEWAL, iNDiS 2023, Proceedings, 2023)
The problems of steady-state and transient heat conduction for a given geometry can be
solved analytically and numerically. While the use of analytical solutions is limited,
numerical methods can be used to solve heat ...
Influence of recycled rubber on properties of concrete
(Department of Civil Engineering and Geodesy, Faculty of Technical Sciences, Novi Sad, 2023)
Global warming and the emission of CO2 into the atmosphere is becoming a bigger
problem in the world every year. The desire for a global increase in production and the
ever-increasing development of industry are the cause ...
Influence of Barite Sand on The Strength on Self-Compacting Concrete with Fly Ash
(15th International Congress on Advances in Civil Engineering, Proceedings Book, Eastern Mediterranean University; Famagusta, North Cyprus, 2023)
This study compared the performance of self-compacting concrete (SCC) based on fly ash addition and limestone filler. A SCC prepared with Portland cement, river sand, and limestone filler was used as a reference sample. ...
Application of coal combustion byproducts in self-compacting concrete: influence on flowability
(University of Belgrade, Technical Faculty in Bor, 2023)
Compared to traditional concrete, self-compacting concrete (SCC) demonstrates greater flowability, which is achieved by including an extra high percentage of ultra-fine particles. As a result, the required high paste content ...
The design of cementitious composites with advanced thermal properties
(Proceedings of the 20th International symposium of MASE, Skopje, Republic of North Macedonia, 2023)
The phyllosilicate mineral pyrophyllite can be utilized in cementitious composites design to replace quartz powder and boost workability, early strengths, and refractoriness. Employed as a mineral additive or microfiller, ...
The influence of steel fibers obtained by recycling waste tires on the properties of concrete
(Proceedings of the 20th International symposium of MASE, Skopje, Republic of North Macedonia, 2023)
The paper shows the influence of steel fibers obtained from steel wire separated in the recycling process of waste car tires on the properties of concrete. The reference concrete was prepared, as well as concretes with the ...
How bad volcano-clastic badlands actually are?
(Chemical Society of Montenegro, 2023)
Eight sediments samples, four from Đavolja varoš and four from Kazár badland have been compared from the perspective of mineralogical composition, petrographic characterization, particle size distribution, pH, electrical ...