Search
Now showing items 11-17 of 17
Prediction model based on artificial neural network for pyrophyllite mechano-chemical activation as an integral step in production of cement binders
(Elsevier Sci Ltd, Oxford, 2020)
The optimal outputs of pyrophyllite mechano-chemical activation in an ultra-centrifugal mill performing under different technological conditions were determined by analytical modeling and verified via Artificial Neural ...
Compressive strength and microstructure of ordinary cured and autoclaved cement-based composites with mechanically activated kaolins
(Elsevier Sci Ltd, Oxford, 2018)
The effects of two different mechanically activated kaolins, AKV (61% kaolinite, 14% quartz and 16% mica) and AKG (51.6% kaolinite and 40.6% quartz) on the compressive strength of cement composites and microstructure of ...
Comprehensive approach to the influence of frequently used secondary raw materials on clay bricks quality using mathematical modeling (a systematic review)
(Elsevier Sci Ltd, Oxford, 2018)
The main idea of this research was to evaluate rice and sunflower hulls, sawdust and their ashes, as additives in clay brick production using mathematical analysis. All available papers, containing the parameters of interest, ...
Optimization of adobe clay bricks based on the raw material properties (mathematical analysis)
(Elsevier Sci Ltd, Oxford, 2020)
This research studies the effects of composition and granulometry analysis of 139 heavy clays on the important characteristics of wet and adobe clay bricks. ANN models were obtained with high prediction accuracy in training ...
The effect of mechano-chemical activation and surface treatment of limestone filler on the properties of construction composites
(Elsevier Sci Ltd, Oxford, 2017)
The effect of the combined actions of milling and hydrophobization procedures applied in construction composites synthesis was investigated. The mortars were prepared with cement (CEM I 42.5) and calcite aggregate complying ...
The study of thermal behavior of montmorillonite and hydromica brick clays in predicting tunnel kiln firing curve
(Elsevier Sci Ltd, Oxford, 2017)
The aim of this study was to test montmorillonite and hydromica type of brick clays by using simultaneous thermal analysis and dilatometry in an assessment of the suitability of brick clays to produce building elements. ...
Effects of mechanical activation on the parameters of talc quality for ceramics production - Chemometric approach
(Elsevier Sci Ltd, Oxford, 2015)
Talc is broadly used in the ceramic materials industry, either as a basic raw material, or as filler, due to its chemical inertia, fragmentation proneness, thermal stability, and refractoriness. The mechanical activation ...