Pretraživanje
Prikaz rezultata 31-40 od 371
Welded joints behaviour in service with special reference to pressure equipment
(Springer, Dordrecht, 2009)
Quality and structural integrity of welded pressure equipment are defined by The Pressure Equipment Directive (97/23/EC). The problem is complex, due to welded joint imperfections, matching effect, heterogeneity of ...
An analysis of the influence of weldment heterogeneity in ferrite-austenite welded structure
(Welding in the World, 2009)
An analysis of the influence of heterogeneity of the ferriteaustenite welded joint on its integrity has been performed. The Charpy specimens, with notch positioned in different regions of welded joint, have been tested ...
Linings based chromite for application in foundry
(ModTech Publishing House, 2012)
In this work, a possibility to develop new chromite-based refractory linings for casting applications has been examined. Lining composition optimization with the controlled reologic properties was achieved by applying ...
Indicators of HSLA steel behavior under low cycle fatigue loading
(Elsevier Science Bv, Amsterdam, 2016)
In present paper, the experimental research of the behaviour of high-strength low-alloy steel (HSLA) exposed to low-cycle fatigue (LCF) with controlled and fully reversible strain (Delta epsilon/2 = const, R epsilon = ...
Microstructure analysis and crack detection in turbine blades after prolonged exposure in plant
(Univ Novi Sad, Fac Tech Sci, Adeko, Novi Sad, 2012)
Turbine blades are one of the most important machine parts in every power generator. Corrosion and/or erosion attack on blades are also available in moisture atmosphere, because the wet water vapour is an usual working ...
Review of results of interlaboratory comparisons of national accredited laboratorys in the free field noise level measurements
(IEEE, NEW YORK, 2015)
Interlaboratory comparisons in the field of enviromental noise level measurements were organized by IMS Institute in Belgrade in August this year as a part of the standard noise monitoring according to of the method given ...
Establishing a method for determination of effective diffusion coefficiente
(ModTech Publishing House, 2011)
The aim of this paper is to calculate the effective diffusion coefficient for typical masonry clay on the base of experimentally recorded drying curves. Two computer programs for calculation of diffusion coefficient, which ...
Integrated LCA and LCCA network level pavement maintenance model
(CRC Press/Balkema, 2019)
Pavement management systems tend to lead to sound decision making regarding the optimal maintenance strategy which is, in most cases, based on the achievement of minimal total society costs which are defined as the sum of ...
Convergence Predictions and Primary Support Optimization of the Tunnel Progon
(Springer Int Publishing Ag, Cham, 2015)
The tunnel Progon is being constructed as a part of Corridor 10 highway project about 5 km north from the border crossing with Bulgaria in southern Serbia. During the design process 2D finite element analysis was utilized ...
Multidisciplinary approach to the assessment of seismic performances and rehabilitation of bridges: nonlinear analyses, probability theory and optimization theory
(Elsevier Science Bv, Amsterdam, 2016)
The paper presents a multidisciplinary approach to the assessment of seismic performances based on the Performance-Based Earthquake Engineering (PBEE), taking into account the multi-criteria optimization theory in analyzing ...