Претраживање
Приказ резултата 631-640 од 680
The Development of Controlled Damage Mechanisms-Based Design Method for Nonlinear Static Pushover Analysis
(Facta Universitatis, Series: Architecture and Civil Engineering, 2014)
This paper presents the original method of controlled building damage mechanisms based on Nonlinear Static Pushover Analysis (NSPA-DMBD). The optimal building damage mechanism is determined based on the solution of the ...
Vulnerability of Damaged Structures: The Concept of the Scenario of Related Non-Linear Analyses
(Varna Free University “Chernorizets Hrabar”, Varna, Bulgaria, 2014)
The research presented in the paper employed the general approach in the analysis of robustness of reinforced concrete skeletal (frame) structures in the events of severe damage caused by strong earthquakes. Such damage ...
Parameter programs for 3D modeling in the function of nondestructive testing and determination of the lifetime of pressure vessels
(UNIVERSITY OF EAST SARAJEVO FACULTY OF TECHNOLOGY, 2023)
Preparation for non-destructive testing (NDT), preparation of test reports, as well as control
calculation of a pressure vessel (PV) using the finite element method (FEM), with or without
identified irregularities, ...
Modeling of Damping Effects in Soil – Structure Interaction in the Pushover Analysis
(1st Croatian Conference on Earthquake Engineering, Zagreb, Croatia, 2021)
The paper shows aspects of damping modelling in nonlinear static pushover analysis (NSPA) of structures through systematization of damping types and formed flow diagram, depending on the type of applied target displacement ...
Some Aspects of Pile Testing Using Static Load Test (SLT)
(Savez građevinskih inženjera Srbije SGIS, 2021)
The paper presents typical examples of pile load tests with a specific analysis of results, whereby the test methodology relies on existing ASTM standards, own knowledge and experience. The pile tests were conducted using ...
Analysis of the steam line damages
(Mašinski Fakultet Banja Luka, Republika Srpska, 2015)
The methodological approach to the analysis of damage to determine the
cause of failure and to repair the damage has been shown using the example of leakage
and damage of a steam line for live-steam in thermal power ...
Determination of polynomial depending between hardness and cooling time t8/5 of steel NIONICRAL 70 heat affected zone
(18th International Conference on New Trends in Fatigue and Fracture NT2F18, 2018)
Because of the high heating and cooling velocity values, welding procedure is an unstable process. During
welding, changes in microstructure are occurring under overheating and/or cooling conditions. In comparing to ...
Static-Dynamic Tests of Bearing Capacity of Wind Turbine Piles
(Comptes rendus de l’Académie bulgare des Sciences, 2022)
The paper presents the static load tests (SLT) and dynamic load tests (DLT) of the piles and numerical analyses of piles in interaction with the soil of wind turbines. Pile tests were conducted using the equipment with ...
Behaviour of 9% Cr steel and simulated HAZ at 600°C
(FRACT3, Chlef, Algeria, 2016)