Претраживање
Приказ резултата 51-60 од 104
Concrete paving blocks and flags made with crushed brick as aggregate
(Construction and Building Materials, 2012)
Demolition of old buildings in urban cores has produced a large amount of waste material. Since they are mostly masonry structures the largest part of the waste material is ceramic waste. Besides that, ceramic waste is ...
Comparative kinetic study of mechanical activation process of mica and talc for industrial application
(Elsevier Sci Ltd, Oxford, 2014)
Mica and talc have wide areas of application as a raw material in a number of industrial branches. Mechanically activated mica has specific applications such as: capacitors, insulators, and pearlescent pigments. Talc is ...
ANN model of brick properties using LPNORM calculation of minerals content
(Elsevier Sci Ltd, Oxford, 2014)
Mineralogical composition of heavy clays is one of the most important properties when stadying raw materials in brick industry. Within this study, quantitative determination of minerals using LPNORM calculation was performed, ...
Influence of different bonding and fluxing agents on the sintering behavior and dielectric properties of steatite ceramic materials
(Elsevier Sci Ltd, Oxford, 2017)
The focus of the study was on providing insights into interconnections between sintering and development of the crystalline microstructure, and consequently variations in dielectric behavior of four steatites fabricated ...
Investigation of thermally induced processes in corundum refractory concretes with addition of fly ash
(Springer, Dordrecht, 2015)
The effects that the fly ash addition has on the behavior of thermally resistant corundum concrete were discussed. Experimental program implied production of two refractory composites: "referent" concrete from 20 % of ...
Primena postupka mehaničke aktivacije u procesu pripreme neplastičnih opekarskih sirovina / Application of mechanical activation treatment within the preparation process of masonaray clay raw materials
(Udruženje inženjera građevinarstva, geotehnike, arhitekture i urbanista "Izgradnja", Beograd, 2011)
U radu je dat uporedni prikaz eksperimentalno utvrđenih rezultata svojstava opekarske sirovine, koja je bila pripremljena standardnim postupkom prerade i postupkom mehaničke aktivacije. Uobičajeni standardni postupak prerade ...
Life extension of gears flank surfaces regenerated by hard facing
(Editura Stiintifica Fmr, Bucharest, 2013)
This paper contains the results of experimental analysis of fatigue endurance of used steel teeth regenerated by hard facing. The cylindrical spur gears were tested and compared with the newly made ones, oiler being ...
Study on the addition effect of metakaolin and mechanically activated kaolin on cement strength and microstructure under different curing conditions
(Elsevier Sci Ltd, Oxford, 2017)
The effects of thermally (MK) or mechanically activated kaolin (AK) on the compressive strength of mortars and microstructure of pastes were investigated. Mortar mixtures, in which 10%, 20% and 30% of ordinary Portland ...
Mechanically activated coal ash as refractory bauxite shotcrete microfiller: Thermal interactions mechanism investigation
(Elsevier Sci Ltd, Oxford, 2014)
A growing demand for refractory castables with advanced properties has given rise to a continuous technological evolution and highlighted the necessity for secondary raw materials reapplication even in refractory industry. ...
The influence of nano-silica and barite aggregate on properties of ultra high performance concrete
(Elsevier Sci Ltd, Oxford, 2016)
The development of building materials with improved characteristics and their application for increasing structure durability and sustainability is one of the goals in construction sector. The main objective of this paper ...