Search
Now showing items 1-10 of 198
Compressive strength and microstructure of ordinary cured and autoclaved cement-based composites with mechanically activated kaolins
(Elsevier Sci Ltd, Oxford, 2018)
The effects of two different mechanically activated kaolins, AKV (61% kaolinite, 14% quartz and 16% mica) and AKG (51.6% kaolinite and 40.6% quartz) on the compressive strength of cement composites and microstructure of ...
Phenomenon of moisture expansion and its influence on mechanical properties of brick clay products
(11th International Conference and Exhibition of the European Ceramic Society 2009, 2009)
The paper considers the moisture expansionphenomenon, as a specific form of corrosion process ofbrick clay products degradation [1]. The influence of themineralogical composition of raw materials, firingtemperature and ...
Geometry, mechanical properties and mounting of perforated plates for ballistic application
(Elsevier Sci Ltd, Oxford, 2010)
In this paper, the ballistic resistance of perforated plates made of different types of steel, mounting and geometry was investigated. Different types of steel in various heat treatment conditions were tested. Target ...
Wire fence as applique armour
(Elsevier Sci Ltd, Oxford, 2010)
In this paper, the behaviour of wire fence was investigated for potential as applique armour. The wire fence used was made from commercial high-strength patented wire and the supporting frames were made of mild steel ...
Prilog izradi doklmentacije o proceni utiсаја na životnu sredinu - model netehničkog kraćeg prikaza podataka iz studije
(Poslovna politika AD, Beograd, 2006)
Cilj modela netehničkog kraćeg prikaza podataka iz studije o proceni uticaja na životnu sredinu, je da pored ispunjenja zakonskih obaveza realizatora studije, u pogledu upoznavanja šire javnosti, ukaže i na elemente koji ...
An analysis of the influence of weldment heterogeneity in ferrite-austenite welded structure
(Welding in the World, 2009)
An analysis of the influence of heterogeneity of the ferriteaustenite welded joint on its integrity has been performed. The Charpy specimens, with notch positioned in different regions of welded joint, have been tested ...
Recycling of waste coal dust for the energy-efficient fabrication of bricks: A laboratory to industrial-scale study
(Elsevier, Amsterdam, 2021)
In this study, an optimal mixture of loess brick clays and waste coal dust in laboratory hollow blocks production is determined with the aim of promoting sustainable development in terms of saving resources and energy. The ...
Comprehensive approach to the influence of frequently used secondary raw materials on clay bricks quality using mathematical modeling (a systematic review)
(Elsevier Sci Ltd, Oxford, 2018)
The main idea of this research was to evaluate rice and sunflower hulls, sawdust and their ashes, as additives in clay brick production using mathematical analysis. All available papers, containing the parameters of interest, ...
Direktive EU i standard EN 12341 - osnov za specifikaciju nove metode u imisionom određivanju čestica veličine 1oμm
(Poslovna politika AD, Beograd, 2005)
Postojeća regulativa Republike Srbije iz oblasti zaštite životne sredine predviđa, između ostalog, zaštitu vazduha kao preduzimanje mera sistematskog praćenja kvaliteta vazduha, i pri tom definiše suspendovane materije kao ...
Recommendations for choice of coefficients in pile bearing capacity
(ASCE - American Society of Civil Engineers, 2002)
In this paper we have shown results of research on the influence of the geotechnical environment on pile bearing capacity. Experimental research was carried out at full scale and consisted of test loading of 3 (three) ...