Претраживање
Приказ резултата 291-300 од 405
Simulation of the kinematic hardening of AISI 316 steel by nonlinear finite element analysis
(Serbian Society of Mechanics and Faculty of Technical Sciences Novi Sad, Serbia, 2015)
The coupled non-linear transient calculation is performed and explained in order to simulate the kinematic hardening behavior of AISI 316 steel and the Finite Element Method (FEM) is used for presented simulation. The ...
Feasibility Analysis for Repair of Large Diameter Hydro Turbine Shaft Based on Weldability Test and Welding Cycle Simulation
(Advanced Materials Research, 2019)
Turbine and generator rotors and shafts undergo high stresses during regular working life
and, from a safety and operational aspect, are the most significant components of a power
generation system. Depending on the ...
Theory of critical distances in analysis of the influence of tooth profile on gears bending capacity
(5th International Conference on Power Transmission BAPT2016, 2016)
The fatigue cracks and failures in tooth roots are still one of the most common problems in gear pairs operation.
Therefore, the application of new methods and up-to-date calculation procedures is welcome. This paper ...
Modal analysis of the hydro turbine shaft with cracks
(Abstracts of 14th International conference Dynamical Systems - Theory and Applications, 2017)
The design process for the elements which are the parts of the structures and equipment in power industry includes both of stress and strain state calculations, as well as an analysis of natural mode shapes and frequencies. ...
Elektrofilterski pepeo kao potencijalna sirovina za proizvodnju građevinskih materijala i keramike
(SRTOR VI - 6th Symposium “Recycling Technologies and Sustainable Development with International Participation” / 6. Simpozijum “Reciklažne tehnologije i održivi razvoj”, Zbornik radova, Soko Banja, Srbija, 2011)
Optimizacija sastava i svojstava glinenih kompozita u cilju dobijanja opekarskih proizvoda naprednih performansi
(VIII Kongres savremene industrije glinenih proizvoda Srbije sa međunarodnim učešćem, Zbornik radova, Zlatibor, Srbija, 2018)
The effect of amorphous kaolin on properties of cement-based composites
(3rd International Conference of the Serbian Society for Ceramic Materials -, 2015)
Phytoremediation of agricultural land contaminated with pesticides
(International Conference "Ecological improvement of devastated locations for sustainable development", Conference Proceedings, 2014)
Pesticides are substances intended for preventing, destroying, suppressing or reducing pests.
They are in use for more than 60 years and they are divided according to purpose, chemical
composition and toxicity category. ...
Statistical analysis of shear strength of welds in welded fabric for civil engineering with application of new tool design
(The Association of Metallurgical Engineers of Serbia, Belgrade, Serbia, 2019)
Many new requirements in the field of testing of metals, emphasize traceability
and accuracy of test results as of the end goal. These requirements have hidden
context with emphasis on energy efficiency too., which is ...
Energetske karakteristike briketa od biomase Miskantusa
(Energija, ekonomija, ekologija, Vol. 1-2 god XVIII, pp. 74 - 80, 2016)
Cilj ovog rada je uporedna analiza rezultata dobijenih sagorevanjem briketa čiste trske Miskantusa, briketa trske pomešane sa Topolom (Populus Nigra) i čamovinom i mešavine samo Topole i čamovine. Analizom energetskih ...