Search
Now showing items 41-50 of 63
Microstructure and Phase Composition Of Steatite Ceramics Sintered by Traditional and Spark Plasma Sintering
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2018)
The influence of the sintering method on the mineral phase transformations and development of the crystalline microstructure of steatite ceramics was investigated. The steatite samples were fabricated from talc and bentonite ...
Some properties of concrete based on recycled bricks
(Revista Romana de Materiale/ Romanian Journal of Materials, 2010)
By using crushed brick as aggregate, the structure of concrete can be effectively modeled and materials with very different physical-mechanical characteristics can be obtained. Determination of the influence of polymer ...
Deflection Calculation for Beam-type Structures from Measured Strain Data
(Univ Osijek, Tech Fac, Slavonski Brod, 2020)
Behavior of structures under various load types is determined by their deformation characteristics, global deformation characteristics - deflections and rotations, and local deformation characteristics - strains / stresses ...
Effect of absorption on active pressure in floury soil
(Pleiades Publishing Inc, Moscow, 2015)
Retaining walls are often built in unsaturated soil at shallow depth above groundwater level. It is critical to define active pressure in unsaturated soil for designing retaining walls, based on the expanded theory of ...
Determination of the Pile Stiffness Matrix Based on the Pile Load Test Results and the Effect of Pile Interaction
(Univ Osijek, Tech Fac, Slavonski Brod, 2020)
The paper presents the determination of the elements of the pile stiffness matrix based on pile load test results, made for the needs of modernization of oil refinery for NIS in Pancevo. The tests were carried out on CFA ...
Određivanje efektivnog koeficijenta difuzije prilikom sušenja uzoraka od gline / Calculation of the effective diffusion coefficient during the drying of clay samples
(Srpsko hemijsko društvo, Beograd, 2012)
Cilj ovog rada je da se na primeru dve opekarske gline sa različitih lokaliteta odredi efektivni koeficijenat difuzije na osnovu eksperimentalno snimljenih krivih sušenja. Razvijen je metod i napravljena su dva kompjuterska ...
Physical-Mechanical Properties of Cement Stabilized RAP/Crushed Stone Aggregate Mixtures
(Univ Osijek, Tech Fac, Slavonski Brod, 2019)
The paper presents and analyzes the results of testing the properties of cement stabilized mixtures of reclaimed asphalt pavement (RAP) and crushed stone aggregate (CSA). Tests were carried out on reclaimed asphalt pavement ...
Characterisation of high-carbon steel surface welded layer
(Strojniski Vestnik/Journal of Mechanical Engineering, 2010)
In this paper microstructural and mechanical properties of high-carbon steel surface welded layer, obtained with self-shielded flux cored wire, are presented in the case of a standard rails and crossings. The testing results ...
Future Armoured Troop Carrying Vehicles
(Defence Scientific Information Documentation Centre, Delhi, 2010)
Present-day reliance on wheeled and tracked armour personnel carriers (APCs) and infantry fighting vehicles (IFVs), may be changed in the future. Shaped charge grenades and impovised explosive devices (IEDs) represent a ...
Uticaj geometrije trna alata na mehaničke i strukturne karakteristike sučeonog spoja aluminijumske legure 2024-T351 zavarenog postupkom FSW / Influence of pin geometry on mechanical and structural properties of butt friction stir welded 2024-T351 aluminum alloy
(Savez hemijskih inženjera, Beograd, 2015)
U radu je ispitivano kakav zajednički, kombinovani uticaj brzina rotacije alata, brzina zavarivanja i mala promena u geometriji trna alata imaju na zavarljivost, mehaničke i strukturne karakteristike sučeonog spoja Al ...