Now showing items 1-10 of 71
Research of possibilities for use domestic kaolin clays for production of metakaolin
(Savez hemijskih inženjera, Beograd, 2009)
Environmental concerns coming from the high energy consumption and CO2 emission associated with cement production have brought about pressures to reduce cement consumption through the use of new materials which can be ...
Influence of drying constant adn diffusivity of clay drying behavior
(Industrial Ceramics, 2007)
The influence of the correlation between the drying constant and the diffusion coefficient of the liquid on the behavior of two raw materials for brick manufacturing during their drying process was examined. The test was ...
New possibilities of application of cordierite ceramics
(Silicates Industriels, 2009)
Cordierite ceramics have an important role in modem technology. Standard raw materials, kaolinite, tale, magnesia, alumina were used in synthesis of cordierite ceramics. Composition of cordierite ceramics is 2MgO-2Al 2O ...
Determination of the apparent porosity level of refractory concrete during a sintering process using an ultrasonic pulse velocity technique and image analysis
(Savez hemijskih inženjera, Beograd, 2010)
Concrete which undergoes a thermal treatment before (pre-casted concrete blocks) and during (concrete embedded in-situ) its life-service can be applied in plants operating at high temperature and as thermal insulation. ...
Influence of the phase composition of refractory materials on creep
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2006)
In this paper, the relationship between the creeping effect and mineralogical characteristics of the applied binding phase for various refractory materials (high-alumina materials, with high or low impurity content, tar ...
Influence of mineralizers on mullite synthesis
(American Ceramic Society, 2006)
Influence of increased temperature on clay fast drying process
(Revista Romana de Materiale/ Romanian Journal of Materials, 2009)
In this paper are presented testing results during process of fast drying at conditions of increased temperature. Three different masonry raw materials were examined using recircular laboratory dryer with air recirculation. ...
Gamma Radiation Absorption Characteristics of Concrete with Components of Different Type Materials
(Polish Acad Sciences Inst Physics, Warsaw, 2010)
Nuclear facilities as nuclear power stations, nuclear research reactors, particle accelerators and linear accelerator in medical institution using concrete in building construction. The different type materials of the ...
Residual life estimation of a thermal power plant component: The high-pressure turbine housing case
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2009)
This study focuses on the estimation of residual life of damaged thermal power plant components. The high-pressure turbine housing was chosen as an example of thermal power plant component where, during the years of ...
Structural Integrity Assessment of Welded Pressure Vessel Produced of HSLA Steel
(Journal Iron Steel Research Editorial Board, Beijing, 2011)
Welded joint is a critical region of a welded structure. The operational safety of welded pressure equipment mostly depends on the behaviour of loaded weldments. Safety of welded structure is dependent on the properties ...