Influence of modifying methods on quality of eutectic and hypereutectic silumine for diesel engine pistons
Abstract
The results of the investigation of the influence of different modifiers (sodium, phosphorus, antimony and strontium) on the quality of AlSi12CuMgNi and AlSi18CuMgNi alloys, which are used for the production of pistons, are presented in this paper. The effects of these elements were investigated with reference to their mechanical and structural properties measured at ambient and elevated temperatures and service performance of the piston. Since strontium and antimony modified alloys are not considered as standardised piston alloys, the research results were compared with the results of standard phosphor and sodium modified alloys normally used at globally renowned piston manufacturer: Mahle, KS.
Keywords:
Tensile strength / Relative elongation / Modifying / Microstructure / Hardness / Eutectic / Elevated temperatureSource:
International Journal of Cast Metals Research, 2013, 26, 4, 209-212Publisher:
- Maney Publishing, Leeds
Funding / projects:
- Serbian Ministry of Science and Education
- The development of casting technologies under the influence of electromagnetic field and technologies of hot plastic forming of 7000 series aluminium alloys for special purposes (RS-34002)
- Directed synthesis, structure and properties of multifunctional materials (RS-172057)
- Development and application of multifunctional materials using domestic raw materials in upgraded processing lines (RS-45008)
DOI: 10.1179/1743133613Y.0000000054
ISSN: 1364-0461
WoS: 000322819600003
Scopus: 2-s2.0-84881049322
Collections
Institution/Community
Institut za ispitivanje materijalaTY - JOUR AU - Tripković, S. AU - Aćimović-Pavlović, Zagorka AU - Terzić, Anja AU - Pavlović, Ljubica AU - Pavlović, Marko PY - 2013 UR - http://rims.institutims.rs/handle/123456789/210 AB - The results of the investigation of the influence of different modifiers (sodium, phosphorus, antimony and strontium) on the quality of AlSi12CuMgNi and AlSi18CuMgNi alloys, which are used for the production of pistons, are presented in this paper. The effects of these elements were investigated with reference to their mechanical and structural properties measured at ambient and elevated temperatures and service performance of the piston. Since strontium and antimony modified alloys are not considered as standardised piston alloys, the research results were compared with the results of standard phosphor and sodium modified alloys normally used at globally renowned piston manufacturer: Mahle, KS. PB - Maney Publishing, Leeds T2 - International Journal of Cast Metals Research T1 - Influence of modifying methods on quality of eutectic and hypereutectic silumine for diesel engine pistons EP - 212 IS - 4 SP - 209 VL - 26 DO - 10.1179/1743133613Y.0000000054 ER -
@article{ author = "Tripković, S. and Aćimović-Pavlović, Zagorka and Terzić, Anja and Pavlović, Ljubica and Pavlović, Marko", year = "2013", abstract = "The results of the investigation of the influence of different modifiers (sodium, phosphorus, antimony and strontium) on the quality of AlSi12CuMgNi and AlSi18CuMgNi alloys, which are used for the production of pistons, are presented in this paper. The effects of these elements were investigated with reference to their mechanical and structural properties measured at ambient and elevated temperatures and service performance of the piston. Since strontium and antimony modified alloys are not considered as standardised piston alloys, the research results were compared with the results of standard phosphor and sodium modified alloys normally used at globally renowned piston manufacturer: Mahle, KS.", publisher = "Maney Publishing, Leeds", journal = "International Journal of Cast Metals Research", title = "Influence of modifying methods on quality of eutectic and hypereutectic silumine for diesel engine pistons", pages = "212-209", number = "4", volume = "26", doi = "10.1179/1743133613Y.0000000054" }
Tripković, S., Aćimović-Pavlović, Z., Terzić, A., Pavlović, L.,& Pavlović, M.. (2013). Influence of modifying methods on quality of eutectic and hypereutectic silumine for diesel engine pistons. in International Journal of Cast Metals Research Maney Publishing, Leeds., 26(4), 209-212. https://doi.org/10.1179/1743133613Y.0000000054
Tripković S, Aćimović-Pavlović Z, Terzić A, Pavlović L, Pavlović M. Influence of modifying methods on quality of eutectic and hypereutectic silumine for diesel engine pistons. in International Journal of Cast Metals Research. 2013;26(4):209-212. doi:10.1179/1743133613Y.0000000054 .
Tripković, S., Aćimović-Pavlović, Zagorka, Terzić, Anja, Pavlović, Ljubica, Pavlović, Marko, "Influence of modifying methods on quality of eutectic and hypereutectic silumine for diesel engine pistons" in International Journal of Cast Metals Research, 26, no. 4 (2013):209-212, https://doi.org/10.1179/1743133613Y.0000000054 . .