A Kinetic Study of Micronization Grinding of Dry Mica in a Planetary Ball Mill
2013
Аутори
Andrić, LjubišaTerzić, Anja
Aćimović-Pavlović, Zagorka
Trumić, Milan
Petrov, Milan
Pavlović, Ljubica
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
This paper presents results of the research of micronization grinding of dry mica in a planetary ball mill. Investigation was conducted in order to improve the quality and to obtain clearly defined properties and characteristics of mica powder. The micronization grinding of dry mica was performed in four time periods: 30, 60, 120, and 360 minutes. The micronized powder was investigated by means of differential thermal and thermogravimetric analyses, analysis of the degree of micronization, the specific surface area analysis, and X-ray diffraction analysis. The achieved results pointed out that dry mica micronization grinding which exceeds 360 minutes is recommended for this type of mill. However, it was also shown that the micronized mica produced by means of planetary ball mill after extra long periods of micronization grinding can pass into amorphous state.
Кључне речи:
Micronization Grinding / Dry Mica / Planetary Ball MillИзвор:
Advances in Materials Science and Engineering, 2013, 2013Издавач:
- Hindawi Ltd, London
Финансирање / пројекти:
- Имплементација савременијих техничко-технолошких и еколошких решења у постојећим производним системима Рудника Бакра Бор и Рудника Бакра Мајданпек (RS-33007)
- Механохемијски третман недовољно квалитетних минералних сировина (RS-34006)
- Усмерена синтеза, структура и својства мултифункционалних материјала (RS-172057)
- Развој и примена мултифункционалних материјала на бази домаћих сировина модернизацијом традиционалних технологија (RS-45008)
DOI: 10.1155/2013/543857
ISSN: 1687-8434
WoS: 000326535200001
Scopus: 2-s2.0-84887436137
Институција/група
Institut za ispitivanje materijalaTY - JOUR AU - Andrić, Ljubiša AU - Terzić, Anja AU - Aćimović-Pavlović, Zagorka AU - Trumić, Milan AU - Petrov, Milan AU - Pavlović, Ljubica PY - 2013 UR - http://rims.institutims.rs/handle/123456789/220 AB - This paper presents results of the research of micronization grinding of dry mica in a planetary ball mill. Investigation was conducted in order to improve the quality and to obtain clearly defined properties and characteristics of mica powder. The micronization grinding of dry mica was performed in four time periods: 30, 60, 120, and 360 minutes. The micronized powder was investigated by means of differential thermal and thermogravimetric analyses, analysis of the degree of micronization, the specific surface area analysis, and X-ray diffraction analysis. The achieved results pointed out that dry mica micronization grinding which exceeds 360 minutes is recommended for this type of mill. However, it was also shown that the micronized mica produced by means of planetary ball mill after extra long periods of micronization grinding can pass into amorphous state. PB - Hindawi Ltd, London T2 - Advances in Materials Science and Engineering T1 - A Kinetic Study of Micronization Grinding of Dry Mica in a Planetary Ball Mill VL - 2013 DO - 10.1155/2013/543857 ER -
@article{ author = "Andrić, Ljubiša and Terzić, Anja and Aćimović-Pavlović, Zagorka and Trumić, Milan and Petrov, Milan and Pavlović, Ljubica", year = "2013", abstract = "This paper presents results of the research of micronization grinding of dry mica in a planetary ball mill. Investigation was conducted in order to improve the quality and to obtain clearly defined properties and characteristics of mica powder. The micronization grinding of dry mica was performed in four time periods: 30, 60, 120, and 360 minutes. The micronized powder was investigated by means of differential thermal and thermogravimetric analyses, analysis of the degree of micronization, the specific surface area analysis, and X-ray diffraction analysis. The achieved results pointed out that dry mica micronization grinding which exceeds 360 minutes is recommended for this type of mill. However, it was also shown that the micronized mica produced by means of planetary ball mill after extra long periods of micronization grinding can pass into amorphous state.", publisher = "Hindawi Ltd, London", journal = "Advances in Materials Science and Engineering", title = "A Kinetic Study of Micronization Grinding of Dry Mica in a Planetary Ball Mill", volume = "2013", doi = "10.1155/2013/543857" }
Andrić, L., Terzić, A., Aćimović-Pavlović, Z., Trumić, M., Petrov, M.,& Pavlović, L.. (2013). A Kinetic Study of Micronization Grinding of Dry Mica in a Planetary Ball Mill. in Advances in Materials Science and Engineering Hindawi Ltd, London., 2013. https://doi.org/10.1155/2013/543857
Andrić L, Terzić A, Aćimović-Pavlović Z, Trumić M, Petrov M, Pavlović L. A Kinetic Study of Micronization Grinding of Dry Mica in a Planetary Ball Mill. in Advances in Materials Science and Engineering. 2013;2013. doi:10.1155/2013/543857 .
Andrić, Ljubiša, Terzić, Anja, Aćimović-Pavlović, Zagorka, Trumić, Milan, Petrov, Milan, Pavlović, Ljubica, "A Kinetic Study of Micronization Grinding of Dry Mica in a Planetary Ball Mill" in Advances in Materials Science and Engineering, 2013 (2013), https://doi.org/10.1155/2013/543857 . .