РИМС - Репозиторијум Института за испитивање материјала
Институт за испитивање материјала
    • English
    • Српски
    • Српски (Serbia)
  • Српски (ћирилица) 
    • Енглески
    • Српски (ћирилица)
    • Српски (латиница)
  • Пријава
Преглед записа 
  •   РИМС
  • Institut za ispitivanje materijala
  • Radovi istraživača / Researchers' publications
  • Преглед записа
  •   РИМС
  • Institut za ispitivanje materijala
  • Radovi istraživača / Researchers' publications
  • Преглед записа
JavaScript is disabled for your browser. Some features of this site may not work without it.

Development of New Cordierite-Based Refractory Coatings for Casting Applications

Нема приказа
Аутори
Prstić, Aurel
Aćimović-Pavlović, Zagorka
Terzić, Anja
Pavlović, Ljubica
Grujić, Snezana
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документу
Апстракт
In this study, new refractory coatings based on synthesized cordierite for the casting applications were developed. The investigation included starting raw materials characterization, synthesis of the cordierite, design of the refractory coating as final product, and its application testing. The obtained results pointed out that coating suspension sediment stability was crucial quality parameter. Design and optimization of the coatings composition, with controlled rheological properties included, were achieved by application of different coating components, namely different suspension agents and by alteration of the coating production procedure. Cordierite, used as filler, was obtained by means of synthesis in the solid-state reaction on the basis of talc, kaolin, and alumina. The investigation showed that the application of these particular types of water/alcohol-based coatings has positive influence on surface quality and structural and mechanical properties of the castings of alumin...um alloys obtained by casting into sand molds by means of evaporable models method, that is, evaporate pattern casting process.

Извор:
International Journal of Applied Ceramic Technology, 2014, 11, 2, 321-331
Издавач:
  • Wiley, Hoboken
Финансирање / пројекти:
  • Serbian Ministry of Science and Education
  • Имплементација савременијих техничко-технолошких и еколошких решења у постојећим производним системима Рудника Бакра Бор и Рудника Бакра Мајданпек (RS-33007)
  • Усмерена синтеза, структура и својства мултифункционалних материјала (RS-172057)
  • Развој и примена мултифункционалних материјала на бази домаћих сировина модернизацијом традиционалних технологија (RS-45008)
  • Феномени и процеси синтезе нових стакластих и наноструктурних стакло-керамичких материјала (RS-172004)

DOI: 10.1111/ijac.12010

ISSN: 1546-542X

WoS: 000332095500014

Scopus: 2-s2.0-84897740317
[ Google Scholar ]
3
2
URI
http://rims.institutims.rs/handle/123456789/250
Колекције
  • Radovi istraživača / Researchers' publications
Институција/група
Institut za ispitivanje materijala
TY  - JOUR
AU  - Prstić, Aurel
AU  - Aćimović-Pavlović, Zagorka
AU  - Terzić, Anja
AU  - Pavlović, Ljubica
AU  - Grujić, Snezana
PY  - 2014
UR  - http://rims.institutims.rs/handle/123456789/250
AB  - In this study, new refractory coatings based on synthesized cordierite for the casting applications were developed. The investigation included starting raw materials characterization, synthesis of the cordierite, design of the refractory coating as final product, and its application testing. The obtained results pointed out that coating suspension sediment stability was crucial quality parameter. Design and optimization of the coatings composition, with controlled rheological properties included, were achieved by application of different coating components, namely different suspension agents and by alteration of the coating production procedure. Cordierite, used as filler, was obtained by means of synthesis in the solid-state reaction on the basis of talc, kaolin, and alumina. The investigation showed that the application of these particular types of water/alcohol-based coatings has positive influence on surface quality and structural and mechanical properties of the castings of aluminum alloys obtained by casting into sand molds by means of evaporable models method, that is, evaporate pattern casting process.
PB  - Wiley, Hoboken
T2  - International Journal of Applied Ceramic Technology
T1  - Development of New Cordierite-Based Refractory Coatings for Casting Applications
EP  - 331
IS  - 2
SP  - 321
VL  - 11
DO  - 10.1111/ijac.12010
ER  - 
@article{
author = "Prstić, Aurel and Aćimović-Pavlović, Zagorka and Terzić, Anja and Pavlović, Ljubica and Grujić, Snezana",
year = "2014",
abstract = "In this study, new refractory coatings based on synthesized cordierite for the casting applications were developed. The investigation included starting raw materials characterization, synthesis of the cordierite, design of the refractory coating as final product, and its application testing. The obtained results pointed out that coating suspension sediment stability was crucial quality parameter. Design and optimization of the coatings composition, with controlled rheological properties included, were achieved by application of different coating components, namely different suspension agents and by alteration of the coating production procedure. Cordierite, used as filler, was obtained by means of synthesis in the solid-state reaction on the basis of talc, kaolin, and alumina. The investigation showed that the application of these particular types of water/alcohol-based coatings has positive influence on surface quality and structural and mechanical properties of the castings of aluminum alloys obtained by casting into sand molds by means of evaporable models method, that is, evaporate pattern casting process.",
publisher = "Wiley, Hoboken",
journal = "International Journal of Applied Ceramic Technology",
title = "Development of New Cordierite-Based Refractory Coatings for Casting Applications",
pages = "331-321",
number = "2",
volume = "11",
doi = "10.1111/ijac.12010"
}
Prstić, A., Aćimović-Pavlović, Z., Terzić, A., Pavlović, L.,& Grujić, S.. (2014). Development of New Cordierite-Based Refractory Coatings for Casting Applications. in International Journal of Applied Ceramic Technology
Wiley, Hoboken., 11(2), 321-331.
https://doi.org/10.1111/ijac.12010
Prstić A, Aćimović-Pavlović Z, Terzić A, Pavlović L, Grujić S. Development of New Cordierite-Based Refractory Coatings for Casting Applications. in International Journal of Applied Ceramic Technology. 2014;11(2):321-331.
doi:10.1111/ijac.12010 .
Prstić, Aurel, Aćimović-Pavlović, Zagorka, Terzić, Anja, Pavlović, Ljubica, Grujić, Snezana, "Development of New Cordierite-Based Refractory Coatings for Casting Applications" in International Journal of Applied Ceramic Technology, 11, no. 2 (2014):321-331,
https://doi.org/10.1111/ijac.12010 . .

DSpace software copyright © 2002-2015  DuraSpace
О репозиторијуму РИМС | Пошаљите запажања

OpenAIRERCUB
 

 

Комплетан репозиторијумГрупеАуториНасловиТемеОва институцијаАуториНасловиТеме

Статистика

Преглед статистика

DSpace software copyright © 2002-2015  DuraSpace
О репозиторијуму РИМС | Пошаљите запажања

OpenAIRERCUB