Energy conversion in phosphate ore grain mixture activated via ultra-centrifugal mill
Само за регистроване кориснике
2015
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
The aim of this investigation was to establish the optimal processing parameters of the comminuted phosphate grain mixture mechanical treatment by monitoring and evaluating the activated product characteristics. An ultra-centrifugal mill with a peripheral comminuting path was used as activator in the experiment. A mathematical model based on the theoretical principles of the grain mixture mechanical processing was applied in order to characterize the phosphate activation procedure. As the energy conversion that takes place by the interaction mill-material during activation is recorded on the processed phosphate grains, the increase in potential energy of the activated grains was measured by means of an automatic grain counter. Following the operating hypothesis of the automatic grain counter, the energy conversion and the properties of phosphate grains induced by mechanical force were monitored and expressed in the form of the grain inertia change. The phosphate ore grain mixture used ...in the experiment was thoroughly analyzed, particularly in its activated state. Analytically obtained results were supported by X-ray diffraction analysis for identification of crystalline phases and change in crystallinity, and SEM microphotography of initial and activated phosphate grains. Diverse comparison analyses disclosed that the optimal set of activation process parameters could reduce the negative effect of phosphate sample immanent properties on the final score and furthermore enhance the material reactivity.
Кључне речи:
Scanning electron microscopy / Non-metallic ores / Mechanical activation / Grain potential / Centrifugal millsИзвор:
International Journal of Mineral Processing, 2015, 143, 1-11Издавач:
- Elsevier, Amsterdam
Финансирање / пројекти:
- Serbian Ministry of Education, Science and Technological Development
- Усмерена синтеза, структура и својства мултифункционалних материјала (RS-172057)
- Развој и примена мултифункционалних материјала на бази домаћих сировина модернизацијом традиционалних технологија (RS-45008)
- Имплементација савременијих техничко-технолошких и еколошких решења у постојећим производним системима Рудника Бакра Бор и Рудника Бакра Мајданпек (RS-33007)
- Механохемијски третман недовољно квалитетних минералних сировина (RS-34006)
DOI: 10.1016/j.minpro.2015.08.005
ISSN: 0301-7516
WoS: 000363818100001
Scopus: 2-s2.0-84940666336
Институција/група
Institut za ispitivanje materijalaTY - JOUR AU - Andrić, Ljubiša AU - Terzić, Anja AU - Petrov, Milan AU - Stojanović, Jovica AU - Kostović, Milena PY - 2015 UR - http://rims.institutims.rs/handle/123456789/272 AB - The aim of this investigation was to establish the optimal processing parameters of the comminuted phosphate grain mixture mechanical treatment by monitoring and evaluating the activated product characteristics. An ultra-centrifugal mill with a peripheral comminuting path was used as activator in the experiment. A mathematical model based on the theoretical principles of the grain mixture mechanical processing was applied in order to characterize the phosphate activation procedure. As the energy conversion that takes place by the interaction mill-material during activation is recorded on the processed phosphate grains, the increase in potential energy of the activated grains was measured by means of an automatic grain counter. Following the operating hypothesis of the automatic grain counter, the energy conversion and the properties of phosphate grains induced by mechanical force were monitored and expressed in the form of the grain inertia change. The phosphate ore grain mixture used in the experiment was thoroughly analyzed, particularly in its activated state. Analytically obtained results were supported by X-ray diffraction analysis for identification of crystalline phases and change in crystallinity, and SEM microphotography of initial and activated phosphate grains. Diverse comparison analyses disclosed that the optimal set of activation process parameters could reduce the negative effect of phosphate sample immanent properties on the final score and furthermore enhance the material reactivity. PB - Elsevier, Amsterdam T2 - International Journal of Mineral Processing T1 - Energy conversion in phosphate ore grain mixture activated via ultra-centrifugal mill EP - 11 SP - 1 VL - 143 DO - 10.1016/j.minpro.2015.08.005 ER -
@article{ author = "Andrić, Ljubiša and Terzić, Anja and Petrov, Milan and Stojanović, Jovica and Kostović, Milena", year = "2015", abstract = "The aim of this investigation was to establish the optimal processing parameters of the comminuted phosphate grain mixture mechanical treatment by monitoring and evaluating the activated product characteristics. An ultra-centrifugal mill with a peripheral comminuting path was used as activator in the experiment. A mathematical model based on the theoretical principles of the grain mixture mechanical processing was applied in order to characterize the phosphate activation procedure. As the energy conversion that takes place by the interaction mill-material during activation is recorded on the processed phosphate grains, the increase in potential energy of the activated grains was measured by means of an automatic grain counter. Following the operating hypothesis of the automatic grain counter, the energy conversion and the properties of phosphate grains induced by mechanical force were monitored and expressed in the form of the grain inertia change. The phosphate ore grain mixture used in the experiment was thoroughly analyzed, particularly in its activated state. Analytically obtained results were supported by X-ray diffraction analysis for identification of crystalline phases and change in crystallinity, and SEM microphotography of initial and activated phosphate grains. Diverse comparison analyses disclosed that the optimal set of activation process parameters could reduce the negative effect of phosphate sample immanent properties on the final score and furthermore enhance the material reactivity.", publisher = "Elsevier, Amsterdam", journal = "International Journal of Mineral Processing", title = "Energy conversion in phosphate ore grain mixture activated via ultra-centrifugal mill", pages = "11-1", volume = "143", doi = "10.1016/j.minpro.2015.08.005" }
Andrić, L., Terzić, A., Petrov, M., Stojanović, J.,& Kostović, M.. (2015). Energy conversion in phosphate ore grain mixture activated via ultra-centrifugal mill. in International Journal of Mineral Processing Elsevier, Amsterdam., 143, 1-11. https://doi.org/10.1016/j.minpro.2015.08.005
Andrić L, Terzić A, Petrov M, Stojanović J, Kostović M. Energy conversion in phosphate ore grain mixture activated via ultra-centrifugal mill. in International Journal of Mineral Processing. 2015;143:1-11. doi:10.1016/j.minpro.2015.08.005 .
Andrić, Ljubiša, Terzić, Anja, Petrov, Milan, Stojanović, Jovica, Kostović, Milena, "Energy conversion in phosphate ore grain mixture activated via ultra-centrifugal mill" in International Journal of Mineral Processing, 143 (2015):1-11, https://doi.org/10.1016/j.minpro.2015.08.005 . .