Претраживање
Приказ резултата 1-10 од 44
Properties of composite cement with commercial and manufactured metakaolin
(Univ Osijek, Tech Fac, Slavonski Brod, 2013)
Metakaolin composite cements were prepared with 5 to 35 % replacement of ordinary Portland cement with metakaolin (MK), manufactured by thermal activation/calcination of domestic kaolin clay, and commercial matakaolin ...
Assessment of the effect of pitting corrosion on fatigue crack initiation in hydro turbine shaft
(Trans Tech Publications Ltd, 2013)
Energy efficiency is a key issue worldwide, and not confined solely to the realm of engineers. Past failures of mechanical power system components must be examined carefully in order to minimise future occurrences and ...
State Analysis and Integrity of Welded Structures of the Upper Ring of the Turbine Runner Guide Vane Apparatus of Hydroelectric Generating Set A6 on Hydro Power Plant Djerdap 1
(Trans Tech Publications Ltd, Durnten-Zurich, 2013)
During the refurbishment of the hydroelectric generating set A6 on HPP "Djerdap 1", for the state analysis and assessment of the level and causes of degradation of the structure of the vertical Kaplan turbine runner guide ...
Application of chromite in the production of refractory coatings
(Verlag Schmidt GmbH, 2013)
This work investigated the possibility of developing new chromite-based refractory coatings for hot metal casting applications. The coating composition and rheological properties were optimized by careful choice of binding ...
Drying Process Modelling for Heavy Clay Products Using a New Thin Layer Drying Model
(Trans Tech Publications Ltd, Stafa-Zurich, 2013)
Drying results, determined on samples made of masonry clay from the locality "Banatski Karlovac", are presented in this study. Experimental investigations were carried out in a laboratory recirculation dryer in which drying ...
Prevention of electrofilter ash toxic leaching by embedding in composite materials
(Inženjersko društvo za koroziju, Beograd, 2013)
Disposal of the fly ash may pose a significant risk to the environment due to the leaching of hazardous pollutants. The only sustainable solution for the pollution-prevention is the reapplication of fly ash as one of the ...
What to expect from heavy clay?
(Elsevier Sci Ltd, Oxford, 2013)
The need of testing the quality of brickclay arises in all brick factories, with the opening of new deposits. The analyses are both time and economically consuming, so the aim of this study was to shorten the procedure ...
Effect of welded joint imperfection on the integrity of pipe elbows subjected to internal pressure
(Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek, 2013)
Since local defects reduce the load-carrying capacity and deformation ability of a piping system, an analysis is undertaken to quantify the influence of weld defects on integrity of the pipe elbows subjected to internal ...
Vulkaniti Stolova kao građevinski kamen / Volcanic rocks of Mt. Stolovi as a building stone
(Savez inženjera i tehničara Srbije, Beograd, 2013)
Vulkaniti Stolova južno od Kraljeva predstavljeni su malim vulkanitskim telima dacito-andezita. Ovi vulkaniti su od otvaranja kamenoloma Kamenica pored reke Ribnice korišćeni za dobijanje kocke, agregata i ploča za oblaganje. ...
Dinamičke metode za ispitivanje šipova / Dynamic methods for pile testing
(Savez građevinskih inženjera Srbije, Beograd, 2013)
U radu su opisane četiri metode za ispitivanje šipova. Dve metode, "Sonic integrity testing" (SIT) i "Crosshole ultrasonic method" (CHUM) orijentisane su ka ispitivanju integriteta šipova, a dve metode "Dynamic load testing" ...