Претраживање
Приказ резултата 11-19 од 19
The Chemometric Study of Limestone Physico-chemical Properties and Thermal Behavior for Application in Construction Composites
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2017)
The limestone, as an economically sustainable and easily available basic raw material, is frequently utilized in the building industry for resolving of the environmental protection issues. The limestone is incorporated in ...
Sintering of Fly Ash Based Composites with Zeolite and Bentonite Addition for Application in Construction Materials
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2017)
Due to pozzolanic characteristics, fly ash is commonly used as a cement replacement in construction composites. Addition of natural clays with sorption ability (i.e. zeolite and bentonite) in to the fly ash based construction ...
Influence of the phase composition of refractory materials on creep
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2006)
In this paper, the relationship between the creeping effect and mineralogical characteristics of the applied binding phase for various refractory materials (high-alumina materials, with high or low impurity content, tar ...
Quantitative Formulation of Mechanism of Sintering Process during Creep Deformation of Refractory Concretes
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2009)
This paper is concerned with quantitative formulation of the mechanism of the sintering process during secondary state creep deformation of refractory concretes. Investigated concretes varied in, both, chemical and ...
The influence of high pressure on the properties of natural alumino-silicates
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2002)
U ovom radu analiziran je uticaj hladnog sinterovanja, tj. uticaj visokih pritisaka presovanja do 12 GPa na promene svojstava prirodnih alumosilikata. Izvršeno je ispitivanje hemijskog i minerološkog sastava i termičko ...
Kinetics of thermal relaxation of cold sintered amorphous powder of 82Ni18P
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2002)
Metodom merenja električnog otpora u neizotermskim i izotermskim uslovima ispitan je proces termičke stabilizacije hladnosinterovanog amorfnog praha 82Ni18P. Pokazano je da se proces kristalizacije, praćen daljim sređivanjem ...
Chemometric Analysis of Alternations in Coal Ash Quality Induced by Application of Different Mechano-chemical Processing Parameters
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2017)
The coal fly ash mechano-chemical activation conducted via high energy ultra-centrifugal mill was optimized using mathematical and statistical tools. The aim of the investigation was to accent the merits of alternations ...
Microstructure and Phase Composition Of Steatite Ceramics Sintered by Traditional and Spark Plasma Sintering
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2018)
The influence of the sintering method on the mineral phase transformations and development of the crystalline microstructure of steatite ceramics was investigated. The steatite samples were fabricated from talc and bentonite ...
Mechanical Activation as Sintering Pre-treatment of Talc for Steatite Ceramics
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2014)
The effect of vibratory mill induced mechanical activation on the change of the particle size, crystallinity and the phase transformations of the minerals present in the activated material, was studied with the purpose of ...