Search
Now showing items 1-8 of 8
Influence of different bonding and fluxing agents on the sintering behavior and dielectric properties of steatite ceramic materials
(Elsevier Sci Ltd, Oxford, 2017)
The focus of the study was on providing insights into interconnections between sintering and development of the crystalline microstructure, and consequently variations in dielectric behavior of four steatites fabricated ...
Comparative kinetic study of mechanical activation process of mica and talc for industrial application
(Elsevier Sci Ltd, Oxford, 2014)
Mica and talc have wide areas of application as a raw material in a number of industrial branches. Mechanically activated mica has specific applications such as: capacitors, insulators, and pearlescent pigments. Talc is ...
The effect of mechano-chemical activation and surface treatment of limestone filler on the properties of construction composites
(Elsevier Sci Ltd, Oxford, 2017)
The effect of the combined actions of milling and hydrophobization procedures applied in construction composites synthesis was investigated. The mortars were prepared with cement (CEM I 42.5) and calcite aggregate complying ...
The effect of alternations in mineral additives (zeolite, bentonite, fly ash) on physico-chemical behavior of Portland cement based binders
(Elsevier Sci Ltd, Oxford, 2018)
Instrumental analyses accompanied by analytical modeling tools were employed to assess physico-chemical changes induced by variations in chemical composition of cementitious composites, i.e. mortar binders. Coal combustion ...
Effects of mechanical-activation and TiO2 addition on the behavior of two-step sintered steatite ceramics
(Elsevier Sci Ltd, Oxford, 2019)
Steatite, as ceramic with composition predominantly resting on magnesium silicate, was produced from economic resources - talc, aluminosilicate clays, and either BaCO3 or feldspar as flux. Titanium dioxide was a doping ...
Microstructure and Phase Composition Of Steatite Ceramics Sintered by Traditional and Spark Plasma Sintering
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2018)
The influence of the sintering method on the mineral phase transformations and development of the crystalline microstructure of steatite ceramics was investigated. The steatite samples were fabricated from talc and bentonite ...
Chemometric Analysis of Alternations in Coal Ash Quality Induced by Application of Different Mechano-chemical Processing Parameters
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2017)
The coal fly ash mechano-chemical activation conducted via high energy ultra-centrifugal mill was optimized using mathematical and statistical tools. The aim of the investigation was to accent the merits of alternations ...
Analytical modeling of activation procedure applied in alpha-alumina thermo-mechanical synthesis
(Elsevier Sci Ltd, Oxford, 2015)
The impact of the mechanical processing parameters on the alumina grain-size distribution affiliated characteristics and on the gamma to alpha phase transformation rate was investigated. The moderation in the alumina samples ...